| /* |
| * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> |
| * Copyright (C) 2010 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| #include <linux/platform_data/usb-ehci-mxc.h> |
| |
| #define USBCTRL_OTGBASE_OFFSET 0x600 |
| |
| #define MX25_OTG_SIC_SHIFT 29 |
| #define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) |
| #define MX25_OTG_PM_BIT (1 << 24) |
| #define MX25_OTG_PP_BIT (1 << 11) |
| #define MX25_OTG_OCPOL_BIT (1 << 3) |
| |
| #define MX25_H1_SIC_SHIFT 21 |
| #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) |
| #define MX25_H1_PP_BIT (1 << 18) |
| #define MX25_H1_PM_BIT (1 << 8) |
| #define MX25_H1_IPPUE_UP_BIT (1 << 7) |
| #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) |
| #define MX25_H1_TLL_BIT (1 << 5) |
| #define MX25_H1_USBTE_BIT (1 << 4) |
| #define MX25_H1_OCPOL_BIT (1 << 2) |
| |
| int mx25_initialize_usb_hw(int port, unsigned int flags) |
| { |
| unsigned int v; |
| |
| v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); |
| |
| switch (port) { |
| case 0: /* OTG port */ |
| v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | |
| MX25_OTG_OCPOL_BIT); |
| v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; |
| |
| if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) |
| v |= MX25_OTG_PM_BIT; |
| |
| if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) |
| v |= MX25_OTG_PP_BIT; |
| |
| if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) |
| v |= MX25_OTG_OCPOL_BIT; |
| |
| break; |
| case 1: /* H1 port */ |
| v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | |
| MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | |
| MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); |
| v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; |
| |
| if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) |
| v |= MX25_H1_PM_BIT; |
| |
| if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) |
| v |= MX25_H1_PP_BIT; |
| |
| if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) |
| v |= MX25_H1_OCPOL_BIT; |
| |
| if (!(flags & MXC_EHCI_TTL_ENABLED)) |
| v |= MX25_H1_TLL_BIT; |
| |
| if (flags & MXC_EHCI_INTERNAL_PHY) |
| v |= MX25_H1_USBTE_BIT; |
| |
| if (flags & MXC_EHCI_IPPUE_DOWN) |
| v |= MX25_H1_IPPUE_DOWN_BIT; |
| |
| if (flags & MXC_EHCI_IPPUE_UP) |
| v |= MX25_H1_IPPUE_UP_BIT; |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); |
| |
| return 0; |
| } |
| |