/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "sdm670-pmic-overlay.dtsi"

&soc {
	/* Delete all regulators */
	/delete-node/ rpmh-regulator-smpa4;
	/delete-node/ rpmh-regulator-smpa6;
	/delete-node/ rpmh-regulator-mxlvl;
	/delete-node/ rpmh-regulator-modemlvl;
	/delete-node/ rpmh-regulator-cxlvl;
	/delete-node/ rpmh-regulator-ldoa1;
	/delete-node/ rpmh-regulator-ldoa2;
	/delete-node/ rpmh-regulator-ldoa3;
	/delete-node/ rpmh-regulator-ldoa5;
	/delete-node/ rpmh-regulator-ldoa6;
	/delete-node/ rpmh-regulator-ldoa7;
	/delete-node/ rpmh-regulator-ldoa8;
	/delete-node/ rpmh-regulator-ldoa9;
	/delete-node/ rpmh-regulator-ldoa10;
	/delete-node/ rpmh-regulator-ldoa11;
	/delete-node/ rpmh-regulator-ldoa12;
	/delete-node/ rpmh-regulator-ldoa13;
	/delete-node/ rpmh-regulator-ldoa14;
	/delete-node/ rpmh-regulator-ldoa15;
	/delete-node/ rpmh-regulator-ldoa16;
	/delete-node/ rpmh-regulator-ldoa17;
	/delete-node/ rpmh-regulator-ldoa19;
	/delete-node/ rpmh-regulator-ldob1;
	/delete-node/ rpmh-regulator-ldob2;
	/delete-node/ rpmh-regulator-ldob3;
	/delete-node/ rpmh-regulator-ldob4;
	/delete-node/ rpmh-regulator-ldob5;
	/delete-node/ rpmh-regulator-ldob6;
	/delete-node/ rpmh-regulator-ldob7;
	/delete-node/ rpmh-regulator-ldob8;
	/delete-node/ rpmh-regulator-lcxlvl;
	/delete-node/ rpmh-regulator-lmxlvl;
	/delete-node/ rpmh-regulator-ldoa28;
	/delete-node/ rpmh-regulator-bobb1;
	/delete-node/ rpmh-regulator-gfxlvl;
};

#include "sdm670-stub-regulator.dtsi"

&qupv3_se9_2uart {
	status = "disabled";
};

&qupv3_se8_spi {
	status = "disabled";
};

&qupv3_se10_2uart {
	status = "ok";
};

&qupv3_se3_i2c {
	status = "disabled";
};

&qupv3_se10_i2c {
	status = "disabled";
};

&qupv3_se6_4uart {
	status = "disabled";
};

&ufsphy_mem {
	compatible = "qcom,ufs-phy-qrbtc-sdm845";

	vdda-phy-supply = <&pm660l_l1>; /* 0.88v */
	vdda-pll-supply = <&pm660_l1>; /* 1.2v */
	vdda-phy-max-microamp = <62900>;
	vdda-pll-max-microamp = <18300>;

	status = "ok";
};

&ufshc_mem {
	limit-tx-hs-gear = <1>;
	limit-rx-hs-gear = <1>;
	scsi-cmd-timeout = <300000>;

	vdd-hba-supply = <&ufs_phy_gdsc>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm660l_l4>;
	vccq2-supply = <&pm660_l8>;
	vcc-max-microamp = <600000>;
	vccq2-max-microamp = <600000>;

	qcom,vddp-ref-clk-supply = <&pm660_l1>;
	qcom,vddp-ref-clk-max-microamp = <100>;

	qcom,disable-lpm;
	rpm-level = <0>;
	spm-level = <0>;
	status = "ok";
};

&sdhc_1 {
	vdd-supply = <&pm660l_l4>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <200 570000>;

	vdd-io-supply = <&pm660_l8>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-lpm-sup;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <200 325000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc1_clk_on  &sdc1_cmd_on &sdc1_data_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;

	qcom,clk-rates = <400000 20000000 25000000 50000000>;
	qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";

	status = "ok";
};

&sdhc_2 {
	vdd-supply = <&pm660l_l5>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <200 800000>;

	vdd-io-supply = <&pm660l_l2>;
	qcom,vdd-io-voltage-level = <1800000 2960000>;
	qcom,vdd-io-current-level = <200 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;

	qcom,clk-rates = <400000 20000000 25000000 50000000>;
	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50";

	status = "ok";
};

&usb0 {
	/delete-property/ qcom,usb-dbm;
	/delete-property/ extcon;
	qcom,charging-disabled;
	dwc3@a600000 {
		maximum-speed = "high-speed";
		usb-phy = <&qusb_phy0>, <&usb_nop_phy>;
	};
};

&qusb_phy0 {
	reg = <0x088e2000 0x4>,
		<0x0a720000 0x9500>;
	reg-names = "qusb_phy_base",
		"emu_phy_base";
	qcom,emulation;
	qcom,emu-init-seq = <0x19 0x1404
				0x20 0x1414
				0x79 0x1410
				0x00 0x1418
				0x99 0x1404
				0x04 0x1408
				0xd9 0x1404>;

	qcom,emu-dcm-reset-seq = <0x5 0x14      /* 0x1 0x14 for E1.2 */
				0x100000 0x20
				0x0 0x20
				0x1a0 0x20    /* 0x220 0x20 for E1.2 */
				0x80 0x28>;
};

&usb_qmp_dp_phy {
	status = "disabled";
};