drivers/gpu/drm/i915/intel_crt.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright © 2006-2007 Intel Corporation
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
  * copy of this software and associated documentation files (the "Software"),
  * to deal in the Software without restriction, including without limitation
  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  * and/or sell copies of the Software, and to permit persons to whom the
  * Software is furnished to do so, subject to the following conditions:
  *
  * The above copyright notice and this permission notice (including the next
  * paragraph) shall be included in all copies or substantial portions of the
  * Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  * DEALINGS IN THE SOFTWARE.
  *
  * Authors:
  *	Eric Anholt <eric@anholt.net>
  */

 #include <linux/dmi.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include "drmP.h"
 #include "drm.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
 #include "drm_edid.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"

 /* Here's the desired hotplug mode */
 #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |		\
 			   ADPA_CRT_HOTPLUG_WARMUP_10MS |		\
 			   ADPA_CRT_HOTPLUG_SAMPLE_4S |			\
 			   ADPA_CRT_HOTPLUG_VOLTAGE_50 |		\
 			   ADPA_CRT_HOTPLUG_VOLREF_325MV |		\
 			   ADPA_CRT_HOTPLUG_ENABLE)

 struct intel_crt {
 	struct intel_encoder base;
 	bool force_hotplug_required;
 };

 static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
 {
 	return container_of(intel_attached_encoder(connector),
 			    struct intel_crt, base);
 }

 static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 temp;

 	temp = I915_READ(PCH_ADPA);
 	temp &= ~ADPA_DAC_ENABLE;

 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
 		temp |= ADPA_DAC_ENABLE;
 		break;
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 	case DRM_MODE_DPMS_OFF:
 		/* Just leave port enable cleared */
 		break;
 	}

 	I915_WRITE(PCH_ADPA, temp);
 }

 static void gmch_crt_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 temp;

 	temp = I915_READ(ADPA);
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 	temp &= ~ADPA_DAC_ENABLE;

 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
 		temp |= ADPA_DAC_ENABLE;
 		break;
 	case DRM_MODE_DPMS_STANDBY:
 		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
 		break;
 	case DRM_MODE_DPMS_SUSPEND:
 		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
 		break;
 	case DRM_MODE_DPMS_OFF:
 		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
 		break;
 	}

 	I915_WRITE(ADPA, temp);
 }

 static int intel_crt_mode_valid(struct drm_connector *connector,
 				struct drm_display_mode *mode)
 {
 	struct drm_device *dev = connector->dev;

 	int max_clock = 0;
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;

 	if (mode->clock < 25000)
 		return MODE_CLOCK_LOW;

 	if (IS_GEN2(dev))
 		max_clock = 350000;
 	else
 		max_clock = 400000;
 	if (mode->clock > max_clock)
 		return MODE_CLOCK_HIGH;

 	return MODE_OK;
 }

 static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
 				 struct drm_display_mode *mode,
 				 struct drm_display_mode *adjusted_mode)
 {
 	return true;
 }

 static void intel_crt_mode_set(struct drm_encoder *encoder,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode)
 {

 	struct drm_device *dev = encoder->dev;
 	struct drm_crtc *crtc = encoder->crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int dpll_md_reg;
 	u32 adpa, dpll_md;
 	u32 adpa_reg;

 	dpll_md_reg = DPLL_MD(intel_crtc->pipe);

 	if (HAS_PCH_SPLIT(dev))
 		adpa_reg = PCH_ADPA;
 	else
 		adpa_reg = ADPA;

 	/*
 	 * Disable separate mode multiplier used when cloning SDVO to CRT
 	 * XXX this needs to be adjusted when we really are cloning
 	 */
 	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
 		dpll_md = I915_READ(dpll_md_reg);
 		I915_WRITE(dpll_md_reg,
 			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
 	}

 	adpa = ADPA_HOTPLUG_BITS;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 		adpa |= ADPA_VSYNC_ACTIVE_HIGH;

 	/* For CPT allow 3 pipe config, for others just use A or B */
 	if (HAS_PCH_CPT(dev))
 		adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
 	else if (intel_crtc->pipe == 0)
 		adpa |= ADPA_PIPE_A_SELECT;
 	else
 		adpa |= ADPA_PIPE_B_SELECT;

 	if (!HAS_PCH_SPLIT(dev))
 		I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);

 	I915_WRITE(adpa_reg, adpa);
 }

 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 adpa;
 	bool ret;

 	/* The first time through, trigger an explicit detection cycle */
 	if (crt->force_hotplug_required) {
 		bool turn_off_dac = HAS_PCH_SPLIT(dev);
 		u32 save_adpa;

 		crt->force_hotplug_required = 0;

 		save_adpa = adpa = I915_READ(PCH_ADPA);
 		DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);

 		adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 		if (turn_off_dac)
 			adpa &= ~ADPA_DAC_ENABLE;

 		I915_WRITE(PCH_ADPA, adpa);

 		if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 			     1000))
 			DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");

 		if (turn_off_dac) {
 			I915_WRITE(PCH_ADPA, save_adpa);
 			POSTING_READ(PCH_ADPA);
 		}
 	}

 	/* Check the status to see if both blue and green are on now */
 	adpa = I915_READ(PCH_ADPA);
 	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 		ret = true;
 	else
 		ret = false;
 	DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);

 	return ret;
 }

 /**
  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
  *
  * Not for i915G/i915GM
  *
  * \return true if CRT is connected.
  * \return false if CRT is disconnected.
  */
 static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 hotplug_en, orig, stat;
 	bool ret = false;
 	int i, tries = 0;

 	if (HAS_PCH_SPLIT(dev))
 		return intel_ironlake_crt_detect_hotplug(connector);

 	/*
 	 * On 4 series desktop, CRT detect sequence need to be done twice
 	 * to get a reliable result.
 	 */

 	if (IS_G4X(dev) && !IS_GM45(dev))
 		tries = 2;
 	else
 		tries = 1;
 	hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;

 	for (i = 0; i < tries ; i++) {
 		/* turn on the FORCE_DETECT */
 		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 		/* wait for FORCE_DETECT to go off */
 		if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
 			      CRT_HOTPLUG_FORCE_DETECT) == 0,
 			     1000))
 			DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
 	}

 	stat = I915_READ(PORT_HOTPLUG_STAT);
 	if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
 		ret = true;

 	/* clear the interrupt we just generated, if any */
 	I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);

 	/* and put the bits back */
 	I915_WRITE(PORT_HOTPLUG_EN, orig);

 	return ret;
 }

 static bool intel_crt_detect_ddc(struct drm_connector *connector)
 {
 	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;

 	/* CRT should always be at 0, but check anyway */
 	if (crt->base.type != INTEL_OUTPUT_ANALOG)
 		return false;

 	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
 		struct edid *edid;
 		bool is_digital = false;
 		struct i2c_adapter *i2c;

 		i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
 		edid = drm_get_edid(connector, i2c);
 		/*
 		 * This may be a DVI-I connector with a shared DDC
 		 * link between analog and digital outputs, so we
 		 * have to check the EDID input spec of the attached device.
 		 *
 		 * On the other hand, what should we do if it is a broken EDID?
 		 */
 		if (edid != NULL) {
 			is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
 			connector->display_info.raw_edid = NULL;
 			kfree(edid);
 		}

 		if (!is_digital) {
 			DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
 			return true;
 		} else {
 			DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
 		}
 	}

 	return false;
 }

 static enum drm_connector_status
 intel_crt_load_detect(struct intel_crt *crt)
 {
 	struct drm_device *dev = crt->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
 	uint32_t save_bclrpat;
 	uint32_t save_vtotal;
 	uint32_t vtotal, vactive;
 	uint32_t vsample;
 	uint32_t vblank, vblank_start, vblank_end;
 	uint32_t dsl;
 	uint32_t bclrpat_reg;
 	uint32_t vtotal_reg;
 	uint32_t vblank_reg;
 	uint32_t vsync_reg;
 	uint32_t pipeconf_reg;
 	uint32_t pipe_dsl_reg;
 	uint8_t	st00;
 	enum drm_connector_status status;

 	DRM_DEBUG_KMS("starting load-detect on CRT\n");

 	bclrpat_reg = BCLRPAT(pipe);
 	vtotal_reg = VTOTAL(pipe);
 	vblank_reg = VBLANK(pipe);
 	vsync_reg = VSYNC(pipe);
 	pipeconf_reg = PIPECONF(pipe);
 	pipe_dsl_reg = PIPEDSL(pipe);

 	save_bclrpat = I915_READ(bclrpat_reg);
 	save_vtotal = I915_READ(vtotal_reg);
 	vblank = I915_READ(vblank_reg);

 	vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
 	vactive = (save_vtotal & 0x7ff) + 1;

 	vblank_start = (vblank & 0xfff) + 1;
 	vblank_end = ((vblank >> 16) & 0xfff) + 1;

 	/* Set the border color to purple. */
 	I915_WRITE(bclrpat_reg, 0x500050);

 	if (!IS_GEN2(dev)) {
 		uint32_t pipeconf = I915_READ(pipeconf_reg);
 		I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
 		POSTING_READ(pipeconf_reg);
 		/* Wait for next Vblank to substitue
 		 * border color for Color info */
 		intel_wait_for_vblank(dev, pipe);
 		st00 = I915_READ8(VGA_MSR_WRITE);
 		status = ((st00 & (1 << 4)) != 0) ?
 			connector_status_connected :
 			connector_status_disconnected;

 		I915_WRITE(pipeconf_reg, pipeconf);
 	} else {
 		bool restore_vblank = false;
 		int count, detect;

 		/*
 		* If there isn't any border, add some.
 		* Yes, this will flicker
 		*/
 		if (vblank_start <= vactive && vblank_end >= vtotal) {
 			uint32_t vsync = I915_READ(vsync_reg);
 			uint32_t vsync_start = (vsync & 0xffff) + 1;

 			vblank_start = vsync_start;
 			I915_WRITE(vblank_reg,
 				   (vblank_start - 1) |
 				   ((vblank_end - 1) << 16));
 			restore_vblank = true;
 		}
 		/* sample in the vertical border, selecting the larger one */
 		if (vblank_start - vactive >= vtotal - vblank_end)
 			vsample = (vblank_start + vactive) >> 1;
 		else
 			vsample = (vtotal + vblank_end) >> 1;

 		/*
 		 * Wait for the border to be displayed
 		 */
 		while (I915_READ(pipe_dsl_reg) >= vactive)
 			;
 		while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
 			;
 		/*
 		 * Watch ST00 for an entire scanline
 		 */
 		detect = 0;
 		count = 0;
 		do {
 			count++;
 			/* Read the ST00 VGA status register */
 			st00 = I915_READ8(VGA_MSR_WRITE);
 			if (st00 & (1 << 4))
 				detect++;
 		} while ((I915_READ(pipe_dsl_reg) == dsl));

 		/* restore vblank if necessary */
 		if (restore_vblank)
 			I915_WRITE(vblank_reg, vblank);
 		/*
 		 * If more than 3/4 of the scanline detected a monitor,
 		 * then it is assumed to be present. This works even on i830,
 		 * where there isn't any way to force the border color across
 		 * the screen
 		 */
 		status = detect * 4 > count * 3 ?
 			 connector_status_connected :
 			 connector_status_disconnected;
 	}

 	/* Restore previous settings */
 	I915_WRITE(bclrpat_reg, save_bclrpat);

 	return status;
 }

 static enum drm_connector_status
 intel_crt_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
 	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_crtc *crtc;
 	enum drm_connector_status status;

 	if (I915_HAS_HOTPLUG(dev)) {
 		if (intel_crt_detect_hotplug(connector)) {
 			DRM_DEBUG_KMS("CRT detected via hotplug\n");
 			return connector_status_connected;
 		} else {
 			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
 			return connector_status_disconnected;
 		}
 	}

 	if (intel_crt_detect_ddc(connector))
 		return connector_status_connected;

 	if (!force)
 		return connector->status;

 	/* for pre-945g platforms use load detect */
 	crtc = crt->base.base.crtc;
 	if (crtc && crtc->enabled) {
 		status = intel_crt_load_detect(crt);
 	} else {
 		struct intel_load_detect_pipe tmp;

 		if (intel_get_load_detect_pipe(&crt->base, connector, NULL,
 					       &tmp)) {
 			if (intel_crt_detect_ddc(connector))
 				status = connector_status_connected;
 			else
 				status = intel_crt_load_detect(crt);
 			intel_release_load_detect_pipe(&crt->base, connector,
 						       &tmp);
 		} else
 			status = connector_status_unknown;
 	}

 	return status;
 }

 static void intel_crt_destroy(struct drm_connector *connector)
 {
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
 	kfree(connector);
 }

 static int intel_crt_get_modes(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int ret;
 	struct i2c_adapter *i2c;

 	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
 	ret = intel_ddc_get_modes(connector, i2c);
 	if (ret || !IS_G4X(dev))
 		return ret;

 	/* Try to probe digital port for output in DVI-I -> VGA mode. */
 	i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
 	return intel_ddc_get_modes(connector, i2c);
 }

 static int intel_crt_set_property(struct drm_connector *connector,
 				  struct drm_property *property,
 				  uint64_t value)
 {
 	return 0;
 }

 static void intel_crt_reset(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct intel_crt *crt = intel_attached_crt(connector);

 	if (HAS_PCH_SPLIT(dev))
 		crt->force_hotplug_required = 1;
 }

 /*
  * Routines for controlling stuff on the analog port
  */

 static const struct drm_encoder_helper_funcs pch_encoder_funcs = {
 	.mode_fixup = intel_crt_mode_fixup,
 	.prepare = intel_encoder_prepare,
 	.commit = intel_encoder_commit,
 	.mode_set = intel_crt_mode_set,
 	.dpms = pch_crt_dpms,
 };

 static const struct drm_encoder_helper_funcs gmch_encoder_funcs = {
 	.mode_fixup = intel_crt_mode_fixup,
 	.prepare = intel_encoder_prepare,
 	.commit = intel_encoder_commit,
 	.mode_set = intel_crt_mode_set,
 	.dpms = gmch_crt_dpms,
 };

 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 	.reset = intel_crt_reset,
 	.dpms = drm_helper_connector_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.destroy = intel_crt_destroy,
 	.set_property = intel_crt_set_property,
 };

 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
 	.mode_valid = intel_crt_mode_valid,
 	.get_modes = intel_crt_get_modes,
 	.best_encoder = intel_best_encoder,
 };

 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 	.destroy = intel_encoder_destroy,
 };

 static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
 {
 	DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
 	return 1;
 }

 static const struct dmi_system_id intel_no_crt[] = {
 	{
 		.callback = intel_no_crt_dmi_callback,
 		.ident = "ACER ZGB",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
 		},
 	},
 	{ }
 };

 void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
 	struct intel_crt *crt;
 	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	const struct drm_encoder_helper_funcs *encoder_helper_funcs;

 	/* Skip machines without VGA that falsely report hotplug events */
 	if (dmi_check_system(intel_no_crt))
 		return;

 	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
 	if (!crt)
 		return;

 	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 	if (!intel_connector) {
 		kfree(crt);
 		return;
 	}

 	connector = &intel_connector->base;
 	drm_connector_init(dev, &intel_connector->base,
 			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);

 	drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
 			 DRM_MODE_ENCODER_DAC);

 	intel_connector_attach_encoder(intel_connector, &crt->base);

 	crt->base.type = INTEL_OUTPUT_ANALOG;
 	crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
 				1 << INTEL_ANALOG_CLONE_BIT |
 				1 << INTEL_SDVO_LVDS_CLONE_BIT);
 	crt->base.crtc_mask = (1 << 0) | (1 << 1);
 	if (IS_GEN2(dev))
 		connector->interlace_allowed = 0;
 	else
 		connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;

 	if (HAS_PCH_SPLIT(dev))
 		encoder_helper_funcs = &pch_encoder_funcs;
 	else
 		encoder_helper_funcs = &gmch_encoder_funcs;

 	drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);

 	drm_sysfs_connector_add(connector);

 	if (I915_HAS_HOTPLUG(dev))
 		connector->polled = DRM_CONNECTOR_POLL_HPD;
 	else
 		connector->polled = DRM_CONNECTOR_POLL_CONNECT;

 	/*
 	 * Configure the automatic hotplug detection stuff
 	 */
 	crt->force_hotplug_required = 0;
 	if (HAS_PCH_SPLIT(dev)) {
 		u32 adpa;

 		adpa = I915_READ(PCH_ADPA);
 		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
 		adpa |= ADPA_HOTPLUG_BITS;
 		I915_WRITE(PCH_ADPA, adpa);
 		POSTING_READ(PCH_ADPA);

 		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
 		crt->force_hotplug_required = 1;
 	}

 	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
 }
	/*
	* Copyright © 2006-2007 Intel Corporation
	*
	* Permission is hereby granted, free of charge, to any person obtaining a
	* copy of this software and associated documentation files (the "Software"),
	* to deal in the Software without restriction, including without limitation
	* the rights to use, copy, modify, merge, publish, distribute, sublicense,
	* and/or sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following conditions:
	*
	* The above copyright notice and this permission notice (including the next
	* paragraph) shall be included in all copies or substantial portions of the
	* Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
	* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
	* DEALINGS IN THE SOFTWARE.
	*
	* Authors:
	* Eric Anholt <eric@anholt.net>
	*/

	#include <linux/dmi.h>
	#include <linux/i2c.h>
	#include <linux/slab.h>
	#include "drmP.h"
	#include "drm.h"
	#include "drm_crtc.h"
	#include "drm_crtc_helper.h"
	#include "drm_edid.h"
	#include "intel_drv.h"
	#include "i915_drm.h"
	#include "i915_drv.h"

	/* Here's the desired hotplug mode */
	#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 \| \
	ADPA_CRT_HOTPLUG_WARMUP_10MS \| \
	ADPA_CRT_HOTPLUG_SAMPLE_4S \| \
	ADPA_CRT_HOTPLUG_VOLTAGE_50 \| \
	ADPA_CRT_HOTPLUG_VOLREF_325MV \| \
	ADPA_CRT_HOTPLUG_ENABLE)

	struct intel_crt {
	struct intel_encoder base;
	bool force_hotplug_required;
	};

	static struct intel_crt intel_attached_crt(struct drm_connector connector)
	{
	return container_of(intel_attached_encoder(connector),
	struct intel_crt, base);
	}

	static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
	{
	struct drm_device *dev = encoder->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 temp;

	temp = I915_READ(PCH_ADPA);
	temp &= ~ADPA_DAC_ENABLE;

	switch (mode) {
	case DRM_MODE_DPMS_ON:
	temp \|= ADPA_DAC_ENABLE;
	break;
	case DRM_MODE_DPMS_STANDBY:
	case DRM_MODE_DPMS_SUSPEND:
	case DRM_MODE_DPMS_OFF:
	/* Just leave port enable cleared */
	break;
	}

	I915_WRITE(PCH_ADPA, temp);
	}

	static void gmch_crt_dpms(struct drm_encoder *encoder, int mode)
	{
	struct drm_device *dev = encoder->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 temp;

	temp = I915_READ(ADPA);
	temp &= ~(ADPA_HSYNC_CNTL_DISABLE \| ADPA_VSYNC_CNTL_DISABLE);
	temp &= ~ADPA_DAC_ENABLE;

	switch (mode) {
	case DRM_MODE_DPMS_ON:
	temp \|= ADPA_DAC_ENABLE;
	break;
	case DRM_MODE_DPMS_STANDBY:
	temp \|= ADPA_DAC_ENABLE \| ADPA_HSYNC_CNTL_DISABLE;
	break;
	case DRM_MODE_DPMS_SUSPEND:
	temp \|= ADPA_DAC_ENABLE \| ADPA_VSYNC_CNTL_DISABLE;
	break;
	case DRM_MODE_DPMS_OFF:
	temp \|= ADPA_HSYNC_CNTL_DISABLE \| ADPA_VSYNC_CNTL_DISABLE;
	break;
	}

	I915_WRITE(ADPA, temp);
	}

	static int intel_crt_mode_valid(struct drm_connector *connector,
	struct drm_display_mode *mode)
	{
	struct drm_device *dev = connector->dev;

	int max_clock = 0;
	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
	return MODE_NO_DBLESCAN;

	if (mode->clock < 25000)
	return MODE_CLOCK_LOW;

	if (IS_GEN2(dev))
	max_clock = 350000;
	else
	max_clock = 400000;
	if (mode->clock > max_clock)
	return MODE_CLOCK_HIGH;

	return MODE_OK;
	}

	static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
	struct drm_display_mode *mode,
	struct drm_display_mode *adjusted_mode)
	{
	return true;
	}

	static void intel_crt_mode_set(struct drm_encoder *encoder,
	struct drm_display_mode *mode,
	struct drm_display_mode *adjusted_mode)
	{

	struct drm_device *dev = encoder->dev;
	struct drm_crtc *crtc = encoder->crtc;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	struct drm_i915_private *dev_priv = dev->dev_private;
	int dpll_md_reg;
	u32 adpa, dpll_md;
	u32 adpa_reg;

	dpll_md_reg = DPLL_MD(intel_crtc->pipe);

	if (HAS_PCH_SPLIT(dev))
	adpa_reg = PCH_ADPA;
	else
	adpa_reg = ADPA;

	/*
	* Disable separate mode multiplier used when cloning SDVO to CRT
	* XXX this needs to be adjusted when we really are cloning
	*/
	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
	dpll_md = I915_READ(dpll_md_reg);
	I915_WRITE(dpll_md_reg,
	dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
	}

	adpa = ADPA_HOTPLUG_BITS;
	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
	adpa \|= ADPA_HSYNC_ACTIVE_HIGH;
	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
	adpa \|= ADPA_VSYNC_ACTIVE_HIGH;

	/* For CPT allow 3 pipe config, for others just use A or B */
	if (HAS_PCH_CPT(dev))
	adpa \|= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
	else if (intel_crtc->pipe == 0)
	adpa \|= ADPA_PIPE_A_SELECT;
	else
	adpa \|= ADPA_PIPE_B_SELECT;

	if (!HAS_PCH_SPLIT(dev))
	I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);

	I915_WRITE(adpa_reg, adpa);
	}

	static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
	{
	struct drm_device *dev = connector->dev;
	struct intel_crt *crt = intel_attached_crt(connector);
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 adpa;
	bool ret;

	/* The first time through, trigger an explicit detection cycle */
	if (crt->force_hotplug_required) {
	bool turn_off_dac = HAS_PCH_SPLIT(dev);
	u32 save_adpa;

	crt->force_hotplug_required = 0;

	save_adpa = adpa = I915_READ(PCH_ADPA);
	DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);

	adpa \|= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
	if (turn_off_dac)
	adpa &= ~ADPA_DAC_ENABLE;

	I915_WRITE(PCH_ADPA, adpa);

	if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
	1000))
	DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");

	if (turn_off_dac) {
	I915_WRITE(PCH_ADPA, save_adpa);
	POSTING_READ(PCH_ADPA);
	}
	}

	/* Check the status to see if both blue and green are on now */
	adpa = I915_READ(PCH_ADPA);
	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
	ret = true;
	else
	ret = false;
	DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);

	return ret;
	}

	/**
	* Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
	*
	* Not for i915G/i915GM
	*
	* \return true if CRT is connected.
	* \return false if CRT is disconnected.
	*/
	static bool intel_crt_detect_hotplug(struct drm_connector *connector)
	{
	struct drm_device *dev = connector->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 hotplug_en, orig, stat;
	bool ret = false;
	int i, tries = 0;

	if (HAS_PCH_SPLIT(dev))
	return intel_ironlake_crt_detect_hotplug(connector);

	/*
	* On 4 series desktop, CRT detect sequence need to be done twice
	* to get a reliable result.
	*/

	if (IS_G4X(dev) && !IS_GM45(dev))
	tries = 2;
	else
	tries = 1;
	hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
	hotplug_en \|= CRT_HOTPLUG_FORCE_DETECT;

	for (i = 0; i < tries ; i++) {
	/* turn on the FORCE_DETECT */
	I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
	/* wait for FORCE_DETECT to go off */
	if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
	CRT_HOTPLUG_FORCE_DETECT) == 0,
	1000))
	DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
	}

	stat = I915_READ(PORT_HOTPLUG_STAT);
	if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
	ret = true;

	/* clear the interrupt we just generated, if any */
	I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);

	/* and put the bits back */
	I915_WRITE(PORT_HOTPLUG_EN, orig);

	return ret;
	}

	static bool intel_crt_detect_ddc(struct drm_connector *connector)
	{
	struct intel_crt *crt = intel_attached_crt(connector);
	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;

	/* CRT should always be at 0, but check anyway */
	if (crt->base.type != INTEL_OUTPUT_ANALOG)
	return false;

	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
	struct edid *edid;
	bool is_digital = false;
	struct i2c_adapter *i2c;

	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
	edid = drm_get_edid(connector, i2c);
	/*
	* This may be a DVI-I connector with a shared DDC
	* link between analog and digital outputs, so we
	* have to check the EDID input spec of the attached device.
	*
	* On the other hand, what should we do if it is a broken EDID?
	*/
	if (edid != NULL) {
	is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
	connector->display_info.raw_edid = NULL;
	kfree(edid);
	}

	if (!is_digital) {
	DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
	return true;
	} else {
	DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
	}
	}

	return false;
	}

	static enum drm_connector_status
	intel_crt_load_detect(struct intel_crt *crt)
	{
	struct drm_device *dev = crt->base.base.dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
	uint32_t save_bclrpat;
	uint32_t save_vtotal;
	uint32_t vtotal, vactive;
	uint32_t vsample;
	uint32_t vblank, vblank_start, vblank_end;
	uint32_t dsl;
	uint32_t bclrpat_reg;
	uint32_t vtotal_reg;
	uint32_t vblank_reg;
	uint32_t vsync_reg;
	uint32_t pipeconf_reg;
	uint32_t pipe_dsl_reg;
	uint8_t st00;
	enum drm_connector_status status;

	DRM_DEBUG_KMS("starting load-detect on CRT\n");

	bclrpat_reg = BCLRPAT(pipe);
	vtotal_reg = VTOTAL(pipe);
	vblank_reg = VBLANK(pipe);
	vsync_reg = VSYNC(pipe);
	pipeconf_reg = PIPECONF(pipe);
	pipe_dsl_reg = PIPEDSL(pipe);

	save_bclrpat = I915_READ(bclrpat_reg);
	save_vtotal = I915_READ(vtotal_reg);
	vblank = I915_READ(vblank_reg);

	vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
	vactive = (save_vtotal & 0x7ff) + 1;

	vblank_start = (vblank & 0xfff) + 1;
	vblank_end = ((vblank >> 16) & 0xfff) + 1;

	/* Set the border color to purple. */
	I915_WRITE(bclrpat_reg, 0x500050);

	if (!IS_GEN2(dev)) {
	uint32_t pipeconf = I915_READ(pipeconf_reg);
	I915_WRITE(pipeconf_reg, pipeconf \| PIPECONF_FORCE_BORDER);
	POSTING_READ(pipeconf_reg);
	/* Wait for next Vblank to substitue
	* border color for Color info */
	intel_wait_for_vblank(dev, pipe);
	st00 = I915_READ8(VGA_MSR_WRITE);
	status = ((st00 & (1 << 4)) != 0) ?
	connector_status_connected :
	connector_status_disconnected;

	I915_WRITE(pipeconf_reg, pipeconf);
	} else {
	bool restore_vblank = false;
	int count, detect;

	/*
	* If there isn't any border, add some.
	* Yes, this will flicker
	*/
	if (vblank_start <= vactive && vblank_end >= vtotal) {
	uint32_t vsync = I915_READ(vsync_reg);
	uint32_t vsync_start = (vsync & 0xffff) + 1;

	vblank_start = vsync_start;
	I915_WRITE(vblank_reg,
	(vblank_start - 1) \|
	((vblank_end - 1) << 16));
	restore_vblank = true;
	}
	/* sample in the vertical border, selecting the larger one */
	if (vblank_start - vactive >= vtotal - vblank_end)
	vsample = (vblank_start + vactive) >> 1;
	else
	vsample = (vtotal + vblank_end) >> 1;

	/*
	* Wait for the border to be displayed
	*/
	while (I915_READ(pipe_dsl_reg) >= vactive)
	;
	while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
	;
	/*
	* Watch ST00 for an entire scanline
	*/
	detect = 0;
	count = 0;
	do {
	count++;
	/* Read the ST00 VGA status register */
	st00 = I915_READ8(VGA_MSR_WRITE);
	if (st00 & (1 << 4))
	detect++;
	} while ((I915_READ(pipe_dsl_reg) == dsl));

	/* restore vblank if necessary */
	if (restore_vblank)
	I915_WRITE(vblank_reg, vblank);
	/*
	* If more than 3/4 of the scanline detected a monitor,
	* then it is assumed to be present. This works even on i830,
	* where there isn't any way to force the border color across
	* the screen
	*/
	status = detect * 4 > count * 3 ?
	connector_status_connected :
	connector_status_disconnected;
	}

	/* Restore previous settings */
	I915_WRITE(bclrpat_reg, save_bclrpat);

	return status;
	}

	static enum drm_connector_status
	intel_crt_detect(struct drm_connector *connector, bool force)
	{
	struct drm_device *dev = connector->dev;
	struct intel_crt *crt = intel_attached_crt(connector);
	struct drm_crtc *crtc;
	enum drm_connector_status status;

	if (I915_HAS_HOTPLUG(dev)) {
	if (intel_crt_detect_hotplug(connector)) {
	DRM_DEBUG_KMS("CRT detected via hotplug\n");
	return connector_status_connected;
	} else {
	DRM_DEBUG_KMS("CRT not detected via hotplug\n");
	return connector_status_disconnected;
	}
	}

	if (intel_crt_detect_ddc(connector))
	return connector_status_connected;

	if (!force)
	return connector->status;

	/* for pre-945g platforms use load detect */
	crtc = crt->base.base.crtc;
	if (crtc && crtc->enabled) {
	status = intel_crt_load_detect(crt);
	} else {
	struct intel_load_detect_pipe tmp;

	if (intel_get_load_detect_pipe(&crt->base, connector, NULL,
	&tmp)) {
	if (intel_crt_detect_ddc(connector))
	status = connector_status_connected;
	else
	status = intel_crt_load_detect(crt);
	intel_release_load_detect_pipe(&crt->base, connector,
	&tmp);
	} else
	status = connector_status_unknown;
	}

	return status;
	}

	static void intel_crt_destroy(struct drm_connector *connector)
	{
	drm_sysfs_connector_remove(connector);
	drm_connector_cleanup(connector);
	kfree(connector);
	}

	static int intel_crt_get_modes(struct drm_connector *connector)
	{
	struct drm_device *dev = connector->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	int ret;
	struct i2c_adapter *i2c;

	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
	ret = intel_ddc_get_modes(connector, i2c);
	if (ret \|\| !IS_G4X(dev))
	return ret;

	/* Try to probe digital port for output in DVI-I -> VGA mode. */
	i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
	return intel_ddc_get_modes(connector, i2c);
	}

	static int intel_crt_set_property(struct drm_connector *connector,
	struct drm_property *property,
	uint64_t value)
	{
	return 0;
	}

	static void intel_crt_reset(struct drm_connector *connector)
	{
	struct drm_device *dev = connector->dev;
	struct intel_crt *crt = intel_attached_crt(connector);

	if (HAS_PCH_SPLIT(dev))
	crt->force_hotplug_required = 1;
	}

	/*
	* Routines for controlling stuff on the analog port
	*/

	static const struct drm_encoder_helper_funcs pch_encoder_funcs = {
	.mode_fixup = intel_crt_mode_fixup,
	.prepare = intel_encoder_prepare,
	.commit = intel_encoder_commit,
	.mode_set = intel_crt_mode_set,
	.dpms = pch_crt_dpms,
	};

	static const struct drm_encoder_helper_funcs gmch_encoder_funcs = {
	.mode_fixup = intel_crt_mode_fixup,
	.prepare = intel_encoder_prepare,
	.commit = intel_encoder_commit,
	.mode_set = intel_crt_mode_set,
	.dpms = gmch_crt_dpms,
	};

	static const struct drm_connector_funcs intel_crt_connector_funcs = {
	.reset = intel_crt_reset,
	.dpms = drm_helper_connector_dpms,
	.detect = intel_crt_detect,
	.fill_modes = drm_helper_probe_single_connector_modes,
	.destroy = intel_crt_destroy,
	.set_property = intel_crt_set_property,
	};

	static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
	.mode_valid = intel_crt_mode_valid,
	.get_modes = intel_crt_get_modes,
	.best_encoder = intel_best_encoder,
	};

	static const struct drm_encoder_funcs intel_crt_enc_funcs = {
	.destroy = intel_encoder_destroy,
	};

	static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
	{
	DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
	return 1;
	}

	static const struct dmi_system_id intel_no_crt[] = {
	{
	.callback = intel_no_crt_dmi_callback,
	.ident = "ACER ZGB",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
	DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
	},
	},
	{ }
	};

	void intel_crt_init(struct drm_device *dev)
	{
	struct drm_connector *connector;
	struct intel_crt *crt;
	struct intel_connector *intel_connector;
	struct drm_i915_private *dev_priv = dev->dev_private;
	const struct drm_encoder_helper_funcs *encoder_helper_funcs;

	/* Skip machines without VGA that falsely report hotplug events */
	if (dmi_check_system(intel_no_crt))
	return;

	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
	if (!crt)
	return;

	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
	if (!intel_connector) {
	kfree(crt);
	return;
	}

	connector = &intel_connector->base;
	drm_connector_init(dev, &intel_connector->base,
	&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);

	drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
	DRM_MODE_ENCODER_DAC);

	intel_connector_attach_encoder(intel_connector, &crt->base);

	crt->base.type = INTEL_OUTPUT_ANALOG;
	crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT \|
	1 << INTEL_ANALOG_CLONE_BIT \|
	1 << INTEL_SDVO_LVDS_CLONE_BIT);
	crt->base.crtc_mask = (1 << 0) \| (1 << 1);
	if (IS_GEN2(dev))
	connector->interlace_allowed = 0;
	else
	connector->interlace_allowed = 1;
	connector->doublescan_allowed = 0;

	if (HAS_PCH_SPLIT(dev))
	encoder_helper_funcs = &pch_encoder_funcs;
	else
	encoder_helper_funcs = &gmch_encoder_funcs;

	drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);

	drm_sysfs_connector_add(connector);

	if (I915_HAS_HOTPLUG(dev))
	connector->polled = DRM_CONNECTOR_POLL_HPD;
	else
	connector->polled = DRM_CONNECTOR_POLL_CONNECT;

	/*
	* Configure the automatic hotplug detection stuff
	*/
	crt->force_hotplug_required = 0;
	if (HAS_PCH_SPLIT(dev)) {
	u32 adpa;

	adpa = I915_READ(PCH_ADPA);
	adpa &= ~ADPA_CRT_HOTPLUG_MASK;
	adpa \|= ADPA_HOTPLUG_BITS;
	I915_WRITE(PCH_ADPA, adpa);
	POSTING_READ(PCH_ADPA);

	DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
	crt->force_hotplug_required = 1;
	}

	dev_priv->hotplug_supported_mask \|= CRT_HOTPLUG_INT_STATUS;
	}