| /* |
| * drivers/pcmcia/sa1100_assabet.c |
| * |
| * PCMCIA implementation routines for Assabet |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/gpio.h> |
| |
| #include <asm/mach-types.h> |
| #include <mach/assabet.h> |
| |
| #include "sa1100_generic.h" |
| |
| static int assabet_pcmcia_hw_init(struct soc_pcmcia_socket *skt) |
| { |
| skt->stat[SOC_STAT_CD].gpio = ASSABET_GPIO_CF_CD; |
| skt->stat[SOC_STAT_CD].name = "CF CD"; |
| skt->stat[SOC_STAT_BVD1].gpio = ASSABET_GPIO_CF_BVD1; |
| skt->stat[SOC_STAT_BVD1].name = "CF BVD1"; |
| skt->stat[SOC_STAT_BVD2].gpio = ASSABET_GPIO_CF_BVD2; |
| skt->stat[SOC_STAT_BVD2].name = "CF BVD2"; |
| skt->stat[SOC_STAT_RDY].gpio = ASSABET_GPIO_CF_IRQ; |
| skt->stat[SOC_STAT_RDY].name = "CF RDY"; |
| |
| return 0; |
| } |
| |
| static void |
| assabet_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state) |
| { |
| state->vs_3v = 1; /* Can only apply 3.3V on Assabet. */ |
| state->vs_Xv = 0; |
| } |
| |
| static int |
| assabet_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) |
| { |
| unsigned int mask; |
| |
| switch (state->Vcc) { |
| case 0: |
| mask = 0; |
| break; |
| |
| case 50: |
| printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V...\n", |
| __func__); |
| |
| case 33: /* Can only apply 3.3V to the CF slot. */ |
| mask = ASSABET_BCR_CF_PWR; |
| break; |
| |
| default: |
| printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __func__, |
| state->Vcc); |
| return -1; |
| } |
| |
| /* Silently ignore Vpp, speaker enable. */ |
| |
| if (state->flags & SS_RESET) |
| mask |= ASSABET_BCR_CF_RST; |
| if (!(state->flags & SS_OUTPUT_ENA)) |
| mask |= ASSABET_BCR_CF_BUS_OFF; |
| |
| ASSABET_BCR_frob(ASSABET_BCR_CF_RST | ASSABET_BCR_CF_PWR | |
| ASSABET_BCR_CF_BUS_OFF, mask); |
| |
| return 0; |
| } |
| |
| /* |
| * Disable card status IRQs on suspend. |
| */ |
| static void assabet_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) |
| { |
| /* |
| * Tristate the CF bus signals. Also assert CF |
| * reset as per user guide page 4-11. |
| */ |
| ASSABET_BCR_set(ASSABET_BCR_CF_BUS_OFF | ASSABET_BCR_CF_RST); |
| } |
| |
| static struct pcmcia_low_level assabet_pcmcia_ops = { |
| .owner = THIS_MODULE, |
| .hw_init = assabet_pcmcia_hw_init, |
| .socket_state = assabet_pcmcia_socket_state, |
| .configure_socket = assabet_pcmcia_configure_socket, |
| .socket_suspend = assabet_pcmcia_socket_suspend, |
| }; |
| |
| int __devinit pcmcia_assabet_init(struct device *dev) |
| { |
| int ret = -ENODEV; |
| |
| if (machine_is_assabet() && !machine_has_neponset()) |
| ret = sa11xx_drv_pcmcia_probe(dev, &assabet_pcmcia_ops, 1, 1); |
| |
| return ret; |
| } |