| /* |
| * fs/cifs/misc.c |
| * |
| * Copyright (C) International Business Machines Corp., 2002,2008 |
| * Author(s): Steve French (sfrench@us.ibm.com) |
| * |
| * This library is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU Lesser General Public License as published |
| * by the Free Software Foundation; either version 2.1 of the License, or |
| * (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See |
| * the GNU Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public License |
| * along with this library; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/ctype.h> |
| #include <linux/mempool.h> |
| #include "cifspdu.h" |
| #include "cifsglob.h" |
| #include "cifsproto.h" |
| #include "cifs_debug.h" |
| #include "smberr.h" |
| #include "nterr.h" |
| #include "cifs_unicode.h" |
| |
| extern mempool_t *cifs_sm_req_poolp; |
| extern mempool_t *cifs_req_poolp; |
| |
| /* The xid serves as a useful identifier for each incoming vfs request, |
| in a similar way to the mid which is useful to track each sent smb, |
| and CurrentXid can also provide a running counter (although it |
| will eventually wrap past zero) of the total vfs operations handled |
| since the cifs fs was mounted */ |
| |
| unsigned int |
| _GetXid(void) |
| { |
| unsigned int xid; |
| |
| spin_lock(&GlobalMid_Lock); |
| GlobalTotalActiveXid++; |
| |
| /* keep high water mark for number of simultaneous ops in filesystem */ |
| if (GlobalTotalActiveXid > GlobalMaxActiveXid) |
| GlobalMaxActiveXid = GlobalTotalActiveXid; |
| if (GlobalTotalActiveXid > 65000) |
| cFYI(1, "warning: more than 65000 requests active"); |
| xid = GlobalCurrentXid++; |
| spin_unlock(&GlobalMid_Lock); |
| return xid; |
| } |
| |
| void |
| _FreeXid(unsigned int xid) |
| { |
| spin_lock(&GlobalMid_Lock); |
| /* if (GlobalTotalActiveXid == 0) |
| BUG(); */ |
| GlobalTotalActiveXid--; |
| spin_unlock(&GlobalMid_Lock); |
| } |
| |
| struct cifs_ses * |
| sesInfoAlloc(void) |
| { |
| struct cifs_ses *ret_buf; |
| |
| ret_buf = kzalloc(sizeof(struct cifs_ses), GFP_KERNEL); |
| if (ret_buf) { |
| atomic_inc(&sesInfoAllocCount); |
| ret_buf->status = CifsNew; |
| ++ret_buf->ses_count; |
| INIT_LIST_HEAD(&ret_buf->smb_ses_list); |
| INIT_LIST_HEAD(&ret_buf->tcon_list); |
| mutex_init(&ret_buf->session_mutex); |
| } |
| return ret_buf; |
| } |
| |
| void |
| sesInfoFree(struct cifs_ses *buf_to_free) |
| { |
| if (buf_to_free == NULL) { |
| cFYI(1, "Null buffer passed to sesInfoFree"); |
| return; |
| } |
| |
| atomic_dec(&sesInfoAllocCount); |
| kfree(buf_to_free->serverOS); |
| kfree(buf_to_free->serverDomain); |
| kfree(buf_to_free->serverNOS); |
| if (buf_to_free->password) { |
| memset(buf_to_free->password, 0, strlen(buf_to_free->password)); |
| kfree(buf_to_free->password); |
| } |
| kfree(buf_to_free->user_name); |
| kfree(buf_to_free->domainName); |
| kfree(buf_to_free); |
| } |
| |
| struct cifs_tcon * |
| tconInfoAlloc(void) |
| { |
| struct cifs_tcon *ret_buf; |
| ret_buf = kzalloc(sizeof(struct cifs_tcon), GFP_KERNEL); |
| if (ret_buf) { |
| atomic_inc(&tconInfoAllocCount); |
| ret_buf->tidStatus = CifsNew; |
| ++ret_buf->tc_count; |
| INIT_LIST_HEAD(&ret_buf->openFileList); |
| INIT_LIST_HEAD(&ret_buf->tcon_list); |
| #ifdef CONFIG_CIFS_STATS |
| spin_lock_init(&ret_buf->stat_lock); |
| #endif |
| } |
| return ret_buf; |
| } |
| |
| void |
| tconInfoFree(struct cifs_tcon *buf_to_free) |
| { |
| if (buf_to_free == NULL) { |
| cFYI(1, "Null buffer passed to tconInfoFree"); |
| return; |
| } |
| atomic_dec(&tconInfoAllocCount); |
| kfree(buf_to_free->nativeFileSystem); |
| if (buf_to_free->password) { |
| memset(buf_to_free->password, 0, strlen(buf_to_free->password)); |
| kfree(buf_to_free->password); |
| } |
| kfree(buf_to_free); |
| } |
| |
| struct smb_hdr * |
| cifs_buf_get(void) |
| { |
| struct smb_hdr *ret_buf = NULL; |
| |
| /* We could use negotiated size instead of max_msgsize - |
| but it may be more efficient to always alloc same size |
| albeit slightly larger than necessary and maxbuffersize |
| defaults to this and can not be bigger */ |
| ret_buf = mempool_alloc(cifs_req_poolp, GFP_NOFS); |
| |
| /* clear the first few header bytes */ |
| /* for most paths, more is cleared in header_assemble */ |
| if (ret_buf) { |
| memset(ret_buf, 0, sizeof(struct smb_hdr) + 3); |
| atomic_inc(&bufAllocCount); |
| #ifdef CONFIG_CIFS_STATS2 |
| atomic_inc(&totBufAllocCount); |
| #endif /* CONFIG_CIFS_STATS2 */ |
| } |
| |
| return ret_buf; |
| } |
| |
| void |
| cifs_buf_release(void *buf_to_free) |
| { |
| if (buf_to_free == NULL) { |
| /* cFYI(1, "Null buffer passed to cifs_buf_release");*/ |
| return; |
| } |
| mempool_free(buf_to_free, cifs_req_poolp); |
| |
| atomic_dec(&bufAllocCount); |
| return; |
| } |
| |
| struct smb_hdr * |
| cifs_small_buf_get(void) |
| { |
| struct smb_hdr *ret_buf = NULL; |
| |
| /* We could use negotiated size instead of max_msgsize - |
| but it may be more efficient to always alloc same size |
| albeit slightly larger than necessary and maxbuffersize |
| defaults to this and can not be bigger */ |
| ret_buf = mempool_alloc(cifs_sm_req_poolp, GFP_NOFS); |
| if (ret_buf) { |
| /* No need to clear memory here, cleared in header assemble */ |
| /* memset(ret_buf, 0, sizeof(struct smb_hdr) + 27);*/ |
| atomic_inc(&smBufAllocCount); |
| #ifdef CONFIG_CIFS_STATS2 |
| atomic_inc(&totSmBufAllocCount); |
| #endif /* CONFIG_CIFS_STATS2 */ |
| |
| } |
| return ret_buf; |
| } |
| |
| void |
| cifs_small_buf_release(void *buf_to_free) |
| { |
| |
| if (buf_to_free == NULL) { |
| cFYI(1, "Null buffer passed to cifs_small_buf_release"); |
| return; |
| } |
| mempool_free(buf_to_free, cifs_sm_req_poolp); |
| |
| atomic_dec(&smBufAllocCount); |
| return; |
| } |
| |
| /* |
| Find a free multiplex id (SMB mid). Otherwise there could be |
| mid collisions which might cause problems, demultiplexing the |
| wrong response to this request. Multiplex ids could collide if |
| one of a series requests takes much longer than the others, or |
| if a very large number of long lived requests (byte range |
| locks or FindNotify requests) are pending. No more than |
| 64K-1 requests can be outstanding at one time. If no |
| mids are available, return zero. A future optimization |
| could make the combination of mids and uid the key we use |
| to demultiplex on (rather than mid alone). |
| In addition to the above check, the cifs demultiplex |
| code already used the command code as a secondary |
| check of the frame and if signing is negotiated the |
| response would be discarded if the mid were the same |
| but the signature was wrong. Since the mid is not put in the |
| pending queue until later (when it is about to be dispatched) |
| we do have to limit the number of outstanding requests |
| to somewhat less than 64K-1 although it is hard to imagine |
| so many threads being in the vfs at one time. |
| */ |
| __u16 GetNextMid(struct TCP_Server_Info *server) |
| { |
| __u16 mid = 0; |
| __u16 last_mid; |
| bool collision; |
| |
| spin_lock(&GlobalMid_Lock); |
| last_mid = server->CurrentMid; /* we do not want to loop forever */ |
| server->CurrentMid++; |
| /* This nested loop looks more expensive than it is. |
| In practice the list of pending requests is short, |
| fewer than 50, and the mids are likely to be unique |
| on the first pass through the loop unless some request |
| takes longer than the 64 thousand requests before it |
| (and it would also have to have been a request that |
| did not time out) */ |
| while (server->CurrentMid != last_mid) { |
| struct mid_q_entry *mid_entry; |
| unsigned int num_mids; |
| |
| collision = false; |
| if (server->CurrentMid == 0) |
| server->CurrentMid++; |
| |
| num_mids = 0; |
| list_for_each_entry(mid_entry, &server->pending_mid_q, qhead) { |
| ++num_mids; |
| if (mid_entry->mid == server->CurrentMid && |
| mid_entry->midState == MID_REQUEST_SUBMITTED) { |
| /* This mid is in use, try a different one */ |
| collision = true; |
| break; |
| } |
| } |
| |
| /* |
| * if we have more than 32k mids in the list, then something |
| * is very wrong. Possibly a local user is trying to DoS the |
| * box by issuing long-running calls and SIGKILL'ing them. If |
| * we get to 2^16 mids then we're in big trouble as this |
| * function could loop forever. |
| * |
| * Go ahead and assign out the mid in this situation, but force |
| * an eventual reconnect to clean out the pending_mid_q. |
| */ |
| if (num_mids > 32768) |
| server->tcpStatus = CifsNeedReconnect; |
| |
| if (!collision) { |
| mid = server->CurrentMid; |
| break; |
| } |
| server->CurrentMid++; |
| } |
| spin_unlock(&GlobalMid_Lock); |
| return mid; |
| } |
| |
| /* NB: MID can not be set if treeCon not passed in, in that |
| case it is responsbility of caller to set the mid */ |
| void |
| header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , |
| const struct cifs_tcon *treeCon, int word_count |
| /* length of fixed section (word count) in two byte units */) |
| { |
| struct list_head *temp_item; |
| struct cifs_ses *ses; |
| char *temp = (char *) buffer; |
| |
| memset(temp, 0, 256); /* bigger than MAX_CIFS_HDR_SIZE */ |
| |
| buffer->smb_buf_length = cpu_to_be32( |
| (2 * word_count) + sizeof(struct smb_hdr) - |
| 4 /* RFC 1001 length field does not count */ + |
| 2 /* for bcc field itself */) ; |
| |
| buffer->Protocol[0] = 0xFF; |
| buffer->Protocol[1] = 'S'; |
| buffer->Protocol[2] = 'M'; |
| buffer->Protocol[3] = 'B'; |
| buffer->Command = smb_command; |
| buffer->Flags = 0x00; /* case sensitive */ |
| buffer->Flags2 = SMBFLG2_KNOWS_LONG_NAMES; |
| buffer->Pid = cpu_to_le16((__u16)current->tgid); |
| buffer->PidHigh = cpu_to_le16((__u16)(current->tgid >> 16)); |
| if (treeCon) { |
| buffer->Tid = treeCon->tid; |
| if (treeCon->ses) { |
| if (treeCon->ses->capabilities & CAP_UNICODE) |
| buffer->Flags2 |= SMBFLG2_UNICODE; |
| if (treeCon->ses->capabilities & CAP_STATUS32) |
| buffer->Flags2 |= SMBFLG2_ERR_STATUS; |
| |
| /* Uid is not converted */ |
| buffer->Uid = treeCon->ses->Suid; |
| buffer->Mid = GetNextMid(treeCon->ses->server); |
| if (multiuser_mount != 0) { |
| /* For the multiuser case, there are few obvious technically */ |
| /* possible mechanisms to match the local linux user (uid) */ |
| /* to a valid remote smb user (smb_uid): */ |
| /* 1) Query Winbind (or other local pam/nss daemon */ |
| /* for userid/password/logon_domain or credential */ |
| /* 2) Query Winbind for uid to sid to username mapping */ |
| /* and see if we have a matching password for existing*/ |
| /* session for that user perhas getting password by */ |
| /* adding a new pam_cifs module that stores passwords */ |
| /* so that the cifs vfs can get at that for all logged*/ |
| /* on users */ |
| /* 3) (Which is the mechanism we have chosen) */ |
| /* Search through sessions to the same server for a */ |
| /* a match on the uid that was passed in on mount */ |
| /* with the current processes uid (or euid?) and use */ |
| /* that smb uid. If no existing smb session for */ |
| /* that uid found, use the default smb session ie */ |
| /* the smb session for the volume mounted which is */ |
| /* the same as would be used if the multiuser mount */ |
| /* flag were disabled. */ |
| |
| /* BB Add support for establishing new tCon and SMB Session */ |
| /* with userid/password pairs found on the smb session */ |
| /* for other target tcp/ip addresses BB */ |
| if (current_fsuid() != treeCon->ses->linux_uid) { |
| cFYI(1, "Multiuser mode and UID " |
| "did not match tcon uid"); |
| spin_lock(&cifs_tcp_ses_lock); |
| list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) { |
| ses = list_entry(temp_item, struct cifs_ses, smb_ses_list); |
| if (ses->linux_uid == current_fsuid()) { |
| if (ses->server == treeCon->ses->server) { |
| cFYI(1, "found matching uid substitute right smb_uid"); |
| buffer->Uid = ses->Suid; |
| break; |
| } else { |
| /* BB eventually call cifs_setup_session here */ |
| cFYI(1, "local UID found but no smb sess with this server exists"); |
| } |
| } |
| } |
| spin_unlock(&cifs_tcp_ses_lock); |
| } |
| } |
| } |
| if (treeCon->Flags & SMB_SHARE_IS_IN_DFS) |
| buffer->Flags2 |= SMBFLG2_DFS; |
| if (treeCon->nocase) |
| buffer->Flags |= SMBFLG_CASELESS; |
| if ((treeCon->ses) && (treeCon->ses->server)) |
| if (treeCon->ses->server->sec_mode & |
| (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) |
| buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE; |
| } |
| |
| /* endian conversion of flags is now done just before sending */ |
| buffer->WordCount = (char) word_count; |
| return; |
| } |
| |
| static int |
| check_smb_hdr(struct smb_hdr *smb, __u16 mid) |
| { |
| /* does it have the right SMB "signature" ? */ |
| if (*(__le32 *) smb->Protocol != cpu_to_le32(0x424d53ff)) { |
| cERROR(1, "Bad protocol string signature header 0x%x", |
| *(unsigned int *)smb->Protocol); |
| return 1; |
| } |
| |
| /* Make sure that message ids match */ |
| if (mid != smb->Mid) { |
| cERROR(1, "Mids do not match. received=%u expected=%u", |
| smb->Mid, mid); |
| return 1; |
| } |
| |
| /* if it's a response then accept */ |
| if (smb->Flags & SMBFLG_RESPONSE) |
| return 0; |
| |
| /* only one valid case where server sends us request */ |
| if (smb->Command == SMB_COM_LOCKING_ANDX) |
| return 0; |
| |
| cERROR(1, "Server sent request, not response. mid=%u", smb->Mid); |
| return 1; |
| } |
| |
| int |
| checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int total_read) |
| { |
| __u32 rfclen = be32_to_cpu(smb->smb_buf_length); |
| __u32 clc_len; /* calculated length */ |
| cFYI(0, "checkSMB Length: 0x%x, smb_buf_length: 0x%x", |
| total_read, rfclen); |
| |
| /* is this frame too small to even get to a BCC? */ |
| if (total_read < 2 + sizeof(struct smb_hdr)) { |
| if ((total_read >= sizeof(struct smb_hdr) - 1) |
| && (smb->Status.CifsError != 0)) { |
| /* it's an error return */ |
| smb->WordCount = 0; |
| /* some error cases do not return wct and bcc */ |
| return 0; |
| } else if ((total_read == sizeof(struct smb_hdr) + 1) && |
| (smb->WordCount == 0)) { |
| char *tmp = (char *)smb; |
| /* Need to work around a bug in two servers here */ |
| /* First, check if the part of bcc they sent was zero */ |
| if (tmp[sizeof(struct smb_hdr)] == 0) { |
| /* some servers return only half of bcc |
| * on simple responses (wct, bcc both zero) |
| * in particular have seen this on |
| * ulogoffX and FindClose. This leaves |
| * one byte of bcc potentially unitialized |
| */ |
| /* zero rest of bcc */ |
| tmp[sizeof(struct smb_hdr)+1] = 0; |
| return 0; |
| } |
| cERROR(1, "rcvd invalid byte count (bcc)"); |
| } else { |
| cERROR(1, "Length less than smb header size"); |
| } |
| return -EIO; |
| } |
| |
| /* otherwise, there is enough to get to the BCC */ |
| if (check_smb_hdr(smb, mid)) |
| return -EIO; |
| clc_len = smbCalcSize(smb); |
| |
| if (4 + rfclen != total_read) { |
| cERROR(1, "Length read does not match RFC1001 length %d", |
| rfclen); |
| return -EIO; |
| } |
| |
| if (4 + rfclen != clc_len) { |
| /* check if bcc wrapped around for large read responses */ |
| if ((rfclen > 64 * 1024) && (rfclen > clc_len)) { |
| /* check if lengths match mod 64K */ |
| if (((4 + rfclen) & 0xFFFF) == (clc_len & 0xFFFF)) |
| return 0; /* bcc wrapped */ |
| } |
| cFYI(1, "Calculated size %u vs length %u mismatch for mid=%u", |
| clc_len, 4 + rfclen, smb->Mid); |
| |
| if (4 + rfclen < clc_len) { |
| cERROR(1, "RFC1001 size %u smaller than SMB for mid=%u", |
| rfclen, smb->Mid); |
| return -EIO; |
| } else if (rfclen > clc_len + 512) { |
| /* |
| * Some servers (Windows XP in particular) send more |
| * data than the lengths in the SMB packet would |
| * indicate on certain calls (byte range locks and |
| * trans2 find first calls in particular). While the |
| * client can handle such a frame by ignoring the |
| * trailing data, we choose limit the amount of extra |
| * data to 512 bytes. |
| */ |
| cERROR(1, "RFC1001 size %u more than 512 bytes larger " |
| "than SMB for mid=%u", rfclen, smb->Mid); |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| bool |
| is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) |
| { |
| struct smb_com_lock_req *pSMB = (struct smb_com_lock_req *)buf; |
| struct list_head *tmp, *tmp1, *tmp2; |
| struct cifs_ses *ses; |
| struct cifs_tcon *tcon; |
| struct cifsInodeInfo *pCifsInode; |
| struct cifsFileInfo *netfile; |
| |
| cFYI(1, "Checking for oplock break or dnotify response"); |
| if ((pSMB->hdr.Command == SMB_COM_NT_TRANSACT) && |
| (pSMB->hdr.Flags & SMBFLG_RESPONSE)) { |
| struct smb_com_transaction_change_notify_rsp *pSMBr = |
| (struct smb_com_transaction_change_notify_rsp *)buf; |
| struct file_notify_information *pnotify; |
| __u32 data_offset = 0; |
| if (get_bcc(buf) > sizeof(struct file_notify_information)) { |
| data_offset = le32_to_cpu(pSMBr->DataOffset); |
| |
| pnotify = (struct file_notify_information *) |
| ((char *)&pSMBr->hdr.Protocol + data_offset); |
| cFYI(1, "dnotify on %s Action: 0x%x", |
| pnotify->FileName, pnotify->Action); |
| /* cifs_dump_mem("Rcvd notify Data: ",buf, |
| sizeof(struct smb_hdr)+60); */ |
| return true; |
| } |
| if (pSMBr->hdr.Status.CifsError) { |
| cFYI(1, "notify err 0x%d", |
| pSMBr->hdr.Status.CifsError); |
| return true; |
| } |
| return false; |
| } |
| if (pSMB->hdr.Command != SMB_COM_LOCKING_ANDX) |
| return false; |
| if (pSMB->hdr.Flags & SMBFLG_RESPONSE) { |
| /* no sense logging error on invalid handle on oplock |
| break - harmless race between close request and oplock |
| break response is expected from time to time writing out |
| large dirty files cached on the client */ |
| if ((NT_STATUS_INVALID_HANDLE) == |
| le32_to_cpu(pSMB->hdr.Status.CifsError)) { |
| cFYI(1, "invalid handle on oplock break"); |
| return true; |
| } else if (ERRbadfid == |
| le16_to_cpu(pSMB->hdr.Status.DosError.Error)) { |
| return true; |
| } else { |
| return false; /* on valid oplock brk we get "request" */ |
| } |
| } |
| if (pSMB->hdr.WordCount != 8) |
| return false; |
| |
| cFYI(1, "oplock type 0x%d level 0x%d", |
| pSMB->LockType, pSMB->OplockLevel); |
| if (!(pSMB->LockType & LOCKING_ANDX_OPLOCK_RELEASE)) |
| return false; |
| |
| /* look up tcon based on tid & uid */ |
| spin_lock(&cifs_tcp_ses_lock); |
| list_for_each(tmp, &srv->smb_ses_list) { |
| ses = list_entry(tmp, struct cifs_ses, smb_ses_list); |
| list_for_each(tmp1, &ses->tcon_list) { |
| tcon = list_entry(tmp1, struct cifs_tcon, tcon_list); |
| if (tcon->tid != buf->Tid) |
| continue; |
| |
| cifs_stats_inc(&tcon->num_oplock_brks); |
| spin_lock(&cifs_file_list_lock); |
| list_for_each(tmp2, &tcon->openFileList) { |
| netfile = list_entry(tmp2, struct cifsFileInfo, |
| tlist); |
| if (pSMB->Fid != netfile->netfid) |
| continue; |
| |
| cFYI(1, "file id match, oplock break"); |
| pCifsInode = CIFS_I(netfile->dentry->d_inode); |
| |
| cifs_set_oplock_level(pCifsInode, |
| pSMB->OplockLevel ? OPLOCK_READ : 0); |
| queue_work(system_nrt_wq, |
| &netfile->oplock_break); |
| netfile->oplock_break_cancelled = false; |
| |
| spin_unlock(&cifs_file_list_lock); |
| spin_unlock(&cifs_tcp_ses_lock); |
| return true; |
| } |
| spin_unlock(&cifs_file_list_lock); |
| spin_unlock(&cifs_tcp_ses_lock); |
| cFYI(1, "No matching file for oplock break"); |
| return true; |
| } |
| } |
| spin_unlock(&cifs_tcp_ses_lock); |
| cFYI(1, "Can not process oplock break for non-existent connection"); |
| return true; |
| } |
| |
| void |
| dump_smb(struct smb_hdr *smb_buf, int smb_buf_length) |
| { |
| int i, j; |
| char debug_line[17]; |
| unsigned char *buffer; |
| |
| if (traceSMB == 0) |
| return; |
| |
| buffer = (unsigned char *) smb_buf; |
| for (i = 0, j = 0; i < smb_buf_length; i++, j++) { |
| if (i % 8 == 0) { |
| /* have reached the beginning of line */ |
| printk(KERN_DEBUG "| "); |
| j = 0; |
| } |
| printk("%0#4x ", buffer[i]); |
| debug_line[2 * j] = ' '; |
| if (isprint(buffer[i])) |
| debug_line[1 + (2 * j)] = buffer[i]; |
| else |
| debug_line[1 + (2 * j)] = '_'; |
| |
| if (i % 8 == 7) { |
| /* reached end of line, time to print ascii */ |
| debug_line[16] = 0; |
| printk(" | %s\n", debug_line); |
| } |
| } |
| for (; j < 8; j++) { |
| printk(" "); |
| debug_line[2 * j] = ' '; |
| debug_line[1 + (2 * j)] = ' '; |
| } |
| printk(" | %s\n", debug_line); |
| return; |
| } |
| |
| void |
| cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb) |
| { |
| if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { |
| cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM; |
| cERROR(1, "Autodisabling the use of server inode numbers on " |
| "%s. This server doesn't seem to support them " |
| "properly. Hardlinks will not be recognized on this " |
| "mount. Consider mounting with the \"noserverino\" " |
| "option to silence this message.", |
| cifs_sb_master_tcon(cifs_sb)->treeName); |
| } |
| } |
| |
| void cifs_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock) |
| { |
| oplock &= 0xF; |
| |
| if (oplock == OPLOCK_EXCLUSIVE) { |
| cinode->clientCanCacheAll = true; |
| cinode->clientCanCacheRead = true; |
| cFYI(1, "Exclusive Oplock granted on inode %p", |
| &cinode->vfs_inode); |
| } else if (oplock == OPLOCK_READ) { |
| cinode->clientCanCacheAll = false; |
| cinode->clientCanCacheRead = true; |
| cFYI(1, "Level II Oplock granted on inode %p", |
| &cinode->vfs_inode); |
| } else { |
| cinode->clientCanCacheAll = false; |
| cinode->clientCanCacheRead = false; |
| } |
| } |
| |
| bool |
| backup_cred(struct cifs_sb_info *cifs_sb) |
| { |
| if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPUID) { |
| if (cifs_sb->mnt_backupuid == current_fsuid()) |
| return true; |
| } |
| if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPGID) { |
| if (in_group_p(cifs_sb->mnt_backupgid)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void |
| cifs_add_credits(struct TCP_Server_Info *server, const unsigned int add) |
| { |
| spin_lock(&server->req_lock); |
| server->credits += add; |
| server->in_flight--; |
| spin_unlock(&server->req_lock); |
| wake_up(&server->request_q); |
| } |
| |
| void |
| cifs_set_credits(struct TCP_Server_Info *server, const int val) |
| { |
| spin_lock(&server->req_lock); |
| server->credits = val; |
| server->oplocks = val > 1 ? enable_oplocks : false; |
| spin_unlock(&server->req_lock); |
| } |