drivers/gpio: gpio-nomadik: Apply Device Tree bindings
This creates Device Tree bindings for the Nomadik GPIO driver.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 77d03c1..5064140 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -746,10 +746,22 @@
#ifdef CONFIG_MACH_UX500_DT
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+ /* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ /* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
+ /* Requires clock name bindings. */
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
{},
};
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index b35eb25..06addfd 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -1132,6 +1132,7 @@
static int __devinit nmk_gpio_probe(struct platform_device *dev)
{
struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
+ struct device_node *np = dev->dev.of_node;
struct nmk_gpio_chip *nmk_chip;
struct gpio_chip *chip;
struct resource *res;
@@ -1141,8 +1142,28 @@
int irq;
int ret;
- if (!pdata)
+ if (!pdata && !np) {
+ dev_err(&dev->dev, "No platform data or device tree found\n");
return -ENODEV;
+ }
+
+ if (np) {
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (of_get_property(np, "supports-sleepmode", NULL))
+ pdata->supports_sleepmode = true;
+
+ if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
+ dev_err(&dev->dev, "gpio-bank property not found\n");
+ ret = -EINVAL;
+ goto out_dt;
+ }
+
+ pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
+ pdata->num_gpio = NMK_GPIO_PER_CHIP;
+ }
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res) {
@@ -1185,6 +1206,7 @@
ret = -ENOMEM;
goto out_clk;
}
+
/*
* The virt address in nmk_chip->addr is in the nomadik register space,
* so we can simply convert the resource address, without remapping
@@ -1211,6 +1233,8 @@
nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI);
clk_disable(nmk_chip->clk);
+ chip->of_node = np;
+
ret = gpiochip_add(&nmk_chip->chip);
if (ret)
goto out_free;
@@ -1218,12 +1242,13 @@
BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
nmk_gpio_chips[nmk_chip->bank] = nmk_chip;
+
platform_set_drvdata(dev, nmk_chip);
nmk_gpio_init_irq(nmk_chip);
- dev_info(&dev->dev, "at address %p\n",
- nmk_chip->addr);
+ dev_info(&dev->dev, "at address %p\n", nmk_chip->addr);
+
return 0;
out_free:
@@ -1238,13 +1263,23 @@
out:
dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
pdata->first_gpio, pdata->first_gpio+31);
+out_dt:
+ if (np)
+ kfree(pdata);
+
return ret;
}
+static const struct of_device_id nmk_gpio_match[] = {
+ { .compatible = "st,nomadik-gpio", },
+ {}
+};
+
static struct platform_driver nmk_gpio_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "gpio",
+ .of_match_table = nmk_gpio_match,
},
.probe = nmk_gpio_probe,
};