diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index c74607e..f1a83d4 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -114,7 +114,7 @@
 	if (res)
 		return res;
 
-	netif_start_queue(local->mdev);
+	netif_tx_start_all_queues(local->mdev);
 
 	return 0;
 }
@@ -375,7 +375,7 @@
 		queue_work(local->hw.workqueue, &ifsta->work);
 	}
 
-	netif_start_queue(dev);
+	netif_tx_start_all_queues(dev);
 
 	return 0;
  err_del_interface:
@@ -400,7 +400,7 @@
 	/*
 	 * Stop TX on this interface first.
 	 */
-	netif_stop_queue(dev);
+	netif_tx_stop_all_queues(dev);
 
 	/*
 	 * Now delete all active aggregation sessions.
@@ -554,7 +554,6 @@
 int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
-	struct netdev_queue *txq;
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *sdata;
 	u16 start_seq_num = 0;
@@ -619,11 +618,6 @@
 			(unsigned long)&sta->timer_to_tid[tid];
 	init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
 
-	/* ensure that TX flow won't interrupt us
-	 * until the end of the call to requeue function */
-	txq = netdev_get_tx_queue(local->mdev, 0);
-	spin_lock_bh(&txq->lock);
-
 	/* create a new queue for this aggregation */
 	ret = ieee80211_ht_agg_queue_add(local, sta, tid);
 
@@ -650,7 +644,7 @@
 		/* No need to requeue the packets in the agg queue, since we
 		 * held the tx lock: no packet could be enqueued to the newly
 		 * allocated queue */
-		 ieee80211_ht_agg_queue_remove(local, sta, tid, 0);
+		ieee80211_ht_agg_queue_remove(local, sta, tid, 0);
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		printk(KERN_DEBUG "BA request denied - HW unavailable for"
 					" tid %d\n", tid);
@@ -661,7 +655,6 @@
 
 	/* Will put all the packets in the new SW queue */
 	ieee80211_requeue(local, ieee802_1d_to_ac[tid]);
-	spin_unlock_bh(&txq->lock);
 	spin_unlock_bh(&sta->lock);
 
 	/* send an addBA request */
@@ -687,7 +680,6 @@
 err_unlock_queue:
 	kfree(sta->ampdu_mlme.tid_tx[tid]);
 	sta->ampdu_mlme.tid_tx[tid] = NULL;
-	spin_unlock_bh(&txq->lock);
 	ret = -EBUSY;
 err_unlock_sta:
 	spin_unlock_bh(&sta->lock);
@@ -812,7 +804,6 @@
 void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
-	struct netdev_queue *txq;
 	struct sta_info *sta;
 	u8 *state;
 	int agg_queue;
@@ -844,8 +835,9 @@
 	state = &sta->ampdu_mlme.tid_state_tx[tid];
 
 	/* NOTE: no need to use sta->lock in this state check, as
-	 * ieee80211_stop_tx_ba_session will let only
-	 * one stop call to pass through per sta/tid */
+	 * ieee80211_stop_tx_ba_session will let only one stop call to
+	 * pass through per sta/tid
+	 */
 	if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n");
@@ -860,19 +852,14 @@
 
 	agg_queue = sta->tid_to_tx_q[tid];
 
-	/* avoid ordering issues: we are the only one that can modify
-	 * the content of the qdiscs */
-	txq = netdev_get_tx_queue(local->mdev, 0);
-	spin_lock_bh(&txq->lock);
-	/* remove the queue for this aggregation */
 	ieee80211_ht_agg_queue_remove(local, sta, tid, 1);
-	spin_unlock_bh(&txq->lock);
 
-	/* we just requeued the all the frames that were in the removed
-	 * queue, and since we might miss a softirq we do netif_schedule_queue.
-	 * ieee80211_wake_queue is not used here as this queue is not
-	 * necessarily stopped */
-	netif_schedule_queue(txq);
+	/* We just requeued the all the frames that were in the
+	 * removed queue, and since we might miss a softirq we do
+	 * netif_schedule_queue.  ieee80211_wake_queue is not used
+	 * here as this queue is not necessarily stopped
+	 */
+	netif_schedule_queue(netdev_get_tx_queue(local->mdev, agg_queue));
 	spin_lock_bh(&sta->lock);
 	*state = HT_AGG_STATE_IDLE;
 	sta->ampdu_mlme.addba_req_num[tid] = 0;
@@ -1660,17 +1647,12 @@
 	 * We use the number of queues for feature tests (QoS, HT) internally
 	 * so restrict them appropriately.
 	 */
-#ifdef CONFIG_MAC80211_QOS
 	if (hw->queues > IEEE80211_MAX_QUEUES)
 		hw->queues = IEEE80211_MAX_QUEUES;
 	if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES)
 		hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES;
 	if (hw->queues < 4)
 		hw->ampdu_queues = 0;
-#else
-	hw->queues = 1;
-	hw->ampdu_queues = 0;
-#endif
 
 	mdev = alloc_netdev_mq(sizeof(struct wireless_dev),
 			       "wmaster%d", ether_setup,
@@ -1754,7 +1736,7 @@
 		goto fail_wep;
 	}
 
-	ieee80211_install_qdisc(local->mdev);
+	local->mdev->select_queue = ieee80211_select_queue;
 
 	/* add one default STA interface */
 	result = ieee80211_if_add(local, "wlan%d", NULL,
@@ -1852,23 +1834,11 @@
 
 	ret = rc80211_pid_init();
 	if (ret)
-		goto out;
-
-	ret = ieee80211_wme_register();
-	if (ret) {
-		printk(KERN_DEBUG "ieee80211_init: failed to "
-		       "initialize WME (err=%d)\n", ret);
-		goto out_cleanup_pid;
-	}
+		return ret;
 
 	ieee80211_debugfs_netdev_init();
 
 	return 0;
-
- out_cleanup_pid:
-	rc80211_pid_exit();
- out:
-	return ret;
 }
 
 static void __exit ieee80211_exit(void)
@@ -1884,7 +1854,6 @@
 	if (mesh_allocated)
 		ieee80211s_stop();
 
-	ieee80211_wme_unregister();
 	ieee80211_debugfs_netdev_exit();
 }