pinctrl: abx500: force-convert to generic mux bindings
This converts the ABx500 pin controller and all associated device
trees to use the standard, generic mux bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
index 6006d62..112053c 100644
--- a/arch/arm/boot/dts/ste-href-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi
@@ -35,8 +35,8 @@
gpio2 {
gpio2_default_mode: gpio2_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio2_a_1";
+ function = "gpio";
+ groups = "gpio2_a_1";
};
default_cfg {
ste,pins = "GPIO2_R5";
@@ -48,8 +48,8 @@
gpio10 {
gpio10_default_mode: gpio10_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio10_d_1";
+ function = "gpio";
+ groups = "gpio10_d_1";
};
default_cfg {
ste,pins = "GPIO10_B16";
@@ -61,8 +61,8 @@
gpio11 {
gpio11_default_mode: gpio11_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio11_d_1";
+ function = "gpio";
+ groups = "gpio11_d_1";
};
default_cfg {
ste,pins = "GPIO11_B17";
@@ -74,8 +74,8 @@
gpio13 {
gpio13_default_mode: gpio13_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio13_d_1";
+ function = "gpio";
+ groups = "gpio13_d_1";
};
default_cfg {
ste,pins = "GPIO13_D17";
@@ -87,8 +87,8 @@
gpio34 {
gpio34_default_mode: gpio34_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio34_a_1";
+ function = "gpio";
+ groups = "gpio34_a_1";
};
default_cfg {
ste,pins = "GPIO34_H14";
@@ -100,8 +100,8 @@
gpio50 {
gpio50_default_mode: gpio50_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio50_d_1";
+ function = "gpio";
+ groups = "gpio50_d_1";
};
default_cfg {
ste,pins = "GPIO50_L4";
@@ -114,8 +114,8 @@
pwm {
pwm_default_mode: pwm_default {
default_mux {
- ste,function = "pwmout";
- ste,pins = "pwmout1_d_1";
+ function = "pwmout";
+ groups = "pwmout1_d_1";
};
default_cfg {
ste,pins = "GPIO14_C16";
@@ -128,8 +128,8 @@
adi2 {
adi2_default_mode: adi2_default {
default_mux {
- ste,function = "adi2";
- ste,pins = "adi2_d_1";
+ function = "adi2";
+ groups = "adi2_d_1";
};
default_cfg {
ste,pins = "GPIO17_P2",
@@ -145,8 +145,8 @@
modsclsda {
modsclsda_default_mode: modsclsda_default {
default_mux {
- ste,function = "modsclsda";
- ste,pins = "modsclsda_d_1";
+ function = "modsclsda";
+ groups = "modsclsda_d_1";
};
default_cfg {
ste,pins = "GPIO40_J15",
@@ -159,8 +159,8 @@
resethw {
resethw_default_mode: resethw_default {
default_mux {
- ste,function = "resethw";
- ste,pins = "resethw_d_1";
+ function = "resethw";
+ groups = "resethw_d_1";
};
default_cfg {
ste,pins = "GPIO52_D16";
@@ -172,8 +172,8 @@
service {
service_default_mode: service_default {
default_mux {
- ste,function = "service";
- ste,pins = "service_d_1";
+ function = "service";
+ groups = "service_d_1";
};
default_cfg {
ste,pins = "GPIO53_D15";
@@ -188,8 +188,8 @@
sysclkreq2 {
sysclkreq2_default_mode: sysclkreq2_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq2_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq2_d_1";
};
default_cfg {
ste,pins = "GPIO1_N4";
@@ -199,8 +199,8 @@
};
sysclkreq2_sleep_mode: sysclkreq2_sleep {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio1_a_1";
+ function = "gpio";
+ groups = "gpio1_a_1";
};
default_cfg {
ste,pins = "GPIO1_N4";
@@ -212,8 +212,8 @@
sysclkreq4 {
sysclkreq4_default_mode: sysclkreq4_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq4_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq4_d_1";
};
default_cfg {
ste,pins = "GPIO3_P5";
@@ -223,8 +223,8 @@
};
sysclkreq4_sleep_mode: sysclkreq4_sleep {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio3_a_1";
+ function = "gpio";
+ groups = "gpio3_a_1";
};
default_cfg {
ste,pins = "GPIO3_P5";