| /* |
| * iop13xx platform Initialization |
| * Copyright (c) 2005-2006, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 Temple |
| * Place - Suite 330, Boston, MA 02111-1307 USA. |
| * |
| */ |
| |
| #include <linux/serial_8250.h> |
| #include <linux/io.h> |
| #ifdef CONFIG_MTD_PHYSMAP |
| #include <linux/mtd/physmap.h> |
| #endif |
| #include <asm/mach/map.h> |
| #include <mach/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/hardware/iop_adma.h> |
| |
| #define IOP13XX_UART_XTAL 33334000 |
| #define IOP13XX_SETUP_DEBUG 0 |
| #define PRINTK(x...) ((void)(IOP13XX_SETUP_DEBUG && printk(x))) |
| |
| /* Standard IO mapping for all IOP13XX based systems |
| */ |
| static struct map_desc iop13xx_std_desc[] __initdata = { |
| { /* mem mapped registers */ |
| .virtual = IOP13XX_PMMR_VIRT_MEM_BASE, |
| .pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE), |
| .length = IOP13XX_PMMR_SIZE, |
| .type = MT_DEVICE, |
| }, { /* PCIE IO space */ |
| .virtual = IOP13XX_PCIE_LOWER_IO_VA, |
| .pfn = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA), |
| .length = IOP13XX_PCIX_IO_WINDOW_SIZE, |
| .type = MT_DEVICE, |
| }, { /* PCIX IO space */ |
| .virtual = IOP13XX_PCIX_LOWER_IO_VA, |
| .pfn = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA), |
| .length = IOP13XX_PCIX_IO_WINDOW_SIZE, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct resource iop13xx_uart0_resources[] = { |
| [0] = { |
| .start = IOP13XX_UART0_PHYS, |
| .end = IOP13XX_UART0_PHYS + 0x3f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IOP13XX_UART0, |
| .end = IRQ_IOP13XX_UART0, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct resource iop13xx_uart1_resources[] = { |
| [0] = { |
| .start = IOP13XX_UART1_PHYS, |
| .end = IOP13XX_UART1_PHYS + 0x3f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IOP13XX_UART1, |
| .end = IRQ_IOP13XX_UART1, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct plat_serial8250_port iop13xx_uart0_data[] = { |
| { |
| .membase = (char*)(IOP13XX_UART0_VIRT), |
| .mapbase = (IOP13XX_UART0_PHYS), |
| .irq = IRQ_IOP13XX_UART0, |
| .uartclk = IOP13XX_UART_XTAL, |
| .regshift = 2, |
| .iotype = UPIO_MEM, |
| .flags = UPF_SKIP_TEST, |
| }, |
| { }, |
| }; |
| |
| static struct plat_serial8250_port iop13xx_uart1_data[] = { |
| { |
| .membase = (char*)(IOP13XX_UART1_VIRT), |
| .mapbase = (IOP13XX_UART1_PHYS), |
| .irq = IRQ_IOP13XX_UART1, |
| .uartclk = IOP13XX_UART_XTAL, |
| .regshift = 2, |
| .iotype = UPIO_MEM, |
| .flags = UPF_SKIP_TEST, |
| }, |
| { }, |
| }; |
| |
| /* The ids are fixed up later in iop13xx_platform_init */ |
| static struct platform_device iop13xx_uart0 = { |
| .name = "serial8250", |
| .id = 0, |
| .dev.platform_data = iop13xx_uart0_data, |
| .num_resources = 2, |
| .resource = iop13xx_uart0_resources, |
| }; |
| |
| static struct platform_device iop13xx_uart1 = { |
| .name = "serial8250", |
| .id = 0, |
| .dev.platform_data = iop13xx_uart1_data, |
| .num_resources = 2, |
| .resource = iop13xx_uart1_resources |
| }; |
| |
| static struct resource iop13xx_i2c_0_resources[] = { |
| [0] = { |
| .start = IOP13XX_I2C0_PHYS, |
| .end = IOP13XX_I2C0_PHYS + 0x18, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IOP13XX_I2C_0, |
| .end = IRQ_IOP13XX_I2C_0, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct resource iop13xx_i2c_1_resources[] = { |
| [0] = { |
| .start = IOP13XX_I2C1_PHYS, |
| .end = IOP13XX_I2C1_PHYS + 0x18, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IOP13XX_I2C_1, |
| .end = IRQ_IOP13XX_I2C_1, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct resource iop13xx_i2c_2_resources[] = { |
| [0] = { |
| .start = IOP13XX_I2C2_PHYS, |
| .end = IOP13XX_I2C2_PHYS + 0x18, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IOP13XX_I2C_2, |
| .end = IRQ_IOP13XX_I2C_2, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| /* I2C controllers. The IOP13XX uses the same block as the IOP3xx, so |
| * we just use the same device name. |
| */ |
| |
| /* The ids are fixed up later in iop13xx_platform_init */ |
| static struct platform_device iop13xx_i2c_0_controller = { |
| .name = "IOP3xx-I2C", |
| .id = 0, |
| .num_resources = 2, |
| .resource = iop13xx_i2c_0_resources |
| }; |
| |
| static struct platform_device iop13xx_i2c_1_controller = { |
| .name = "IOP3xx-I2C", |
| .id = 0, |
| .num_resources = 2, |
| .resource = iop13xx_i2c_1_resources |
| }; |
| |
| static struct platform_device iop13xx_i2c_2_controller = { |
| .name = "IOP3xx-I2C", |
| .id = 0, |
| .num_resources = 2, |
| .resource = iop13xx_i2c_2_resources |
| }; |
| |
| #ifdef CONFIG_MTD_PHYSMAP |
| /* PBI Flash Device |
| */ |
| static struct physmap_flash_data iq8134x_flash_data = { |
| .width = 2, |
| }; |
| |
| static struct resource iq8134x_flash_resource = { |
| .start = IQ81340_FLASHBASE, |
| .end = 0, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device iq8134x_flash = { |
| .name = "physmap-flash", |
| .id = 0, |
| .dev = { .platform_data = &iq8134x_flash_data, }, |
| .num_resources = 1, |
| .resource = &iq8134x_flash_resource, |
| }; |
| |
| static unsigned long iq8134x_probe_flash_size(void) |
| { |
| uint8_t __iomem *flash_addr = ioremap(IQ81340_FLASHBASE, PAGE_SIZE); |
| int i; |
| char query[3]; |
| unsigned long size = 0; |
| int width = iq8134x_flash_data.width; |
| |
| if (flash_addr) { |
| /* send CFI 'query' command */ |
| writew(0x98, flash_addr); |
| |
| /* check for CFI compliance */ |
| for (i = 0; i < 3 * width; i += width) |
| query[i / width] = readb(flash_addr + (0x10 * width) + i); |
| |
| /* read the size */ |
| if (memcmp(query, "QRY", 3) == 0) |
| size = 1 << readb(flash_addr + (0x27 * width)); |
| |
| /* send CFI 'read array' command */ |
| writew(0xff, flash_addr); |
| |
| iounmap(flash_addr); |
| } |
| |
| return size; |
| } |
| #endif |
| |
| /* ADMA Channels */ |
| static struct resource iop13xx_adma_0_resources[] = { |
| [0] = { |
| .start = IOP13XX_ADMA_PHYS_BASE(0), |
| .end = IOP13XX_ADMA_UPPER_PA(0), |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IOP13XX_ADMA0_EOT, |
| .end = IRQ_IOP13XX_ADMA0_EOT, |
| .flags = IORESOURCE_IRQ |
| }, |
| [2] = { |
| .start = IRQ_IOP13XX_ADMA0_EOC, |
| .end = IRQ_IOP13XX_ADMA0_EOC, |
| .flags = IORESOURCE_IRQ |
| }, |
| [3] = { |
| .start = IRQ_IOP13XX_ADMA0_ERR, |
| .end = IRQ_IOP13XX_ADMA0_ERR, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct resource iop13xx_adma_1_resources[] = { |
| [0] = { |
| .start = IOP13XX_ADMA_PHYS_BASE(1), |
| .end = IOP13XX_ADMA_UPPER_PA(1), |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IOP13XX_ADMA1_EOT, |
| .end = IRQ_IOP13XX_ADMA1_EOT, |
| .flags = IORESOURCE_IRQ |
| }, |
| [2] = { |
| .start = IRQ_IOP13XX_ADMA1_EOC, |
| .end = IRQ_IOP13XX_ADMA1_EOC, |
| .flags = IORESOURCE_IRQ |
| }, |
| [3] = { |
| .start = IRQ_IOP13XX_ADMA1_ERR, |
| .end = IRQ_IOP13XX_ADMA1_ERR, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct resource iop13xx_adma_2_resources[] = { |
| [0] = { |
| .start = IOP13XX_ADMA_PHYS_BASE(2), |
| .end = IOP13XX_ADMA_UPPER_PA(2), |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IOP13XX_ADMA2_EOT, |
| .end = IRQ_IOP13XX_ADMA2_EOT, |
| .flags = IORESOURCE_IRQ |
| }, |
| [2] = { |
| .start = IRQ_IOP13XX_ADMA2_EOC, |
| .end = IRQ_IOP13XX_ADMA2_EOC, |
| .flags = IORESOURCE_IRQ |
| }, |
| [3] = { |
| .start = IRQ_IOP13XX_ADMA2_ERR, |
| .end = IRQ_IOP13XX_ADMA2_ERR, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static u64 iop13xx_adma_dmamask = DMA_64BIT_MASK; |
| static struct iop_adma_platform_data iop13xx_adma_0_data = { |
| .hw_id = 0, |
| .pool_size = PAGE_SIZE, |
| }; |
| |
| static struct iop_adma_platform_data iop13xx_adma_1_data = { |
| .hw_id = 1, |
| .pool_size = PAGE_SIZE, |
| }; |
| |
| static struct iop_adma_platform_data iop13xx_adma_2_data = { |
| .hw_id = 2, |
| .pool_size = PAGE_SIZE, |
| }; |
| |
| /* The ids are fixed up later in iop13xx_platform_init */ |
| static struct platform_device iop13xx_adma_0_channel = { |
| .name = "iop-adma", |
| .id = 0, |
| .num_resources = 4, |
| .resource = iop13xx_adma_0_resources, |
| .dev = { |
| .dma_mask = &iop13xx_adma_dmamask, |
| .coherent_dma_mask = DMA_64BIT_MASK, |
| .platform_data = (void *) &iop13xx_adma_0_data, |
| }, |
| }; |
| |
| static struct platform_device iop13xx_adma_1_channel = { |
| .name = "iop-adma", |
| .id = 0, |
| .num_resources = 4, |
| .resource = iop13xx_adma_1_resources, |
| .dev = { |
| .dma_mask = &iop13xx_adma_dmamask, |
| .coherent_dma_mask = DMA_64BIT_MASK, |
| .platform_data = (void *) &iop13xx_adma_1_data, |
| }, |
| }; |
| |
| static struct platform_device iop13xx_adma_2_channel = { |
| .name = "iop-adma", |
| .id = 0, |
| .num_resources = 4, |
| .resource = iop13xx_adma_2_resources, |
| .dev = { |
| .dma_mask = &iop13xx_adma_dmamask, |
| .coherent_dma_mask = DMA_64BIT_MASK, |
| .platform_data = (void *) &iop13xx_adma_2_data, |
| }, |
| }; |
| |
| void __init iop13xx_map_io(void) |
| { |
| /* Initialize the Static Page Table maps */ |
| iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc)); |
| } |
| |
| static int init_uart; |
| static int init_i2c; |
| static int init_adma; |
| |
| void __init iop13xx_platform_init(void) |
| { |
| int i; |
| u32 uart_idx, i2c_idx, adma_idx, plat_idx; |
| struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES]; |
| |
| /* set the bases so we can read the device id */ |
| iop13xx_set_atu_mmr_bases(); |
| |
| memset(iop13xx_devices, 0, sizeof(iop13xx_devices)); |
| |
| if (init_uart == IOP13XX_INIT_UART_DEFAULT) { |
| switch (iop13xx_dev_id()) { |
| /* enable both uarts on iop341 */ |
| case 0x3380: |
| case 0x3384: |
| case 0x3388: |
| case 0x338c: |
| init_uart |= IOP13XX_INIT_UART_0; |
| init_uart |= IOP13XX_INIT_UART_1; |
| break; |
| /* only enable uart 1 */ |
| default: |
| init_uart |= IOP13XX_INIT_UART_1; |
| } |
| } |
| |
| if (init_i2c == IOP13XX_INIT_I2C_DEFAULT) { |
| switch (iop13xx_dev_id()) { |
| /* enable all i2c units on iop341 and iop342 */ |
| case 0x3380: |
| case 0x3384: |
| case 0x3388: |
| case 0x338c: |
| case 0x3382: |
| case 0x3386: |
| case 0x338a: |
| case 0x338e: |
| init_i2c |= IOP13XX_INIT_I2C_0; |
| init_i2c |= IOP13XX_INIT_I2C_1; |
| init_i2c |= IOP13XX_INIT_I2C_2; |
| break; |
| /* only enable i2c 1 and 2 */ |
| default: |
| init_i2c |= IOP13XX_INIT_I2C_1; |
| init_i2c |= IOP13XX_INIT_I2C_2; |
| } |
| } |
| |
| if (init_adma == IOP13XX_INIT_ADMA_DEFAULT) { |
| init_adma |= IOP13XX_INIT_ADMA_0; |
| init_adma |= IOP13XX_INIT_ADMA_1; |
| init_adma |= IOP13XX_INIT_ADMA_2; |
| } |
| |
| plat_idx = 0; |
| uart_idx = 0; |
| i2c_idx = 0; |
| |
| /* uart 1 (if enabled) is ttyS0 */ |
| if (init_uart & IOP13XX_INIT_UART_1) { |
| PRINTK("Adding uart1 to platform device list\n"); |
| iop13xx_uart1.id = uart_idx++; |
| iop13xx_devices[plat_idx++] = &iop13xx_uart1; |
| } |
| if (init_uart & IOP13XX_INIT_UART_0) { |
| PRINTK("Adding uart0 to platform device list\n"); |
| iop13xx_uart0.id = uart_idx++; |
| iop13xx_devices[plat_idx++] = &iop13xx_uart0; |
| } |
| |
| for(i = 0; i < IQ81340_NUM_I2C; i++) { |
| if ((init_i2c & (1 << i)) && IOP13XX_SETUP_DEBUG) |
| printk("Adding i2c%d to platform device list\n", i); |
| switch(init_i2c & (1 << i)) { |
| case IOP13XX_INIT_I2C_0: |
| iop13xx_i2c_0_controller.id = i2c_idx++; |
| iop13xx_devices[plat_idx++] = |
| &iop13xx_i2c_0_controller; |
| break; |
| case IOP13XX_INIT_I2C_1: |
| iop13xx_i2c_1_controller.id = i2c_idx++; |
| iop13xx_devices[plat_idx++] = |
| &iop13xx_i2c_1_controller; |
| break; |
| case IOP13XX_INIT_I2C_2: |
| iop13xx_i2c_2_controller.id = i2c_idx++; |
| iop13xx_devices[plat_idx++] = |
| &iop13xx_i2c_2_controller; |
| break; |
| } |
| } |
| |
| /* initialize adma channel ids and capabilities */ |
| adma_idx = 0; |
| for (i = 0; i < IQ81340_NUM_ADMA; i++) { |
| struct iop_adma_platform_data *plat_data; |
| if ((init_adma & (1 << i)) && IOP13XX_SETUP_DEBUG) |
| printk(KERN_INFO |
| "Adding adma%d to platform device list\n", i); |
| switch (init_adma & (1 << i)) { |
| case IOP13XX_INIT_ADMA_0: |
| iop13xx_adma_0_channel.id = adma_idx++; |
| iop13xx_devices[plat_idx++] = &iop13xx_adma_0_channel; |
| plat_data = &iop13xx_adma_0_data; |
| dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); |
| dma_cap_set(DMA_XOR, plat_data->cap_mask); |
| dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); |
| dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); |
| dma_cap_set(DMA_MEMSET, plat_data->cap_mask); |
| dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); |
| dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); |
| break; |
| case IOP13XX_INIT_ADMA_1: |
| iop13xx_adma_1_channel.id = adma_idx++; |
| iop13xx_devices[plat_idx++] = &iop13xx_adma_1_channel; |
| plat_data = &iop13xx_adma_1_data; |
| dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); |
| dma_cap_set(DMA_XOR, plat_data->cap_mask); |
| dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); |
| dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); |
| dma_cap_set(DMA_MEMSET, plat_data->cap_mask); |
| dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); |
| dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); |
| break; |
| case IOP13XX_INIT_ADMA_2: |
| iop13xx_adma_2_channel.id = adma_idx++; |
| iop13xx_devices[plat_idx++] = &iop13xx_adma_2_channel; |
| plat_data = &iop13xx_adma_2_data; |
| dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); |
| dma_cap_set(DMA_XOR, plat_data->cap_mask); |
| dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); |
| dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); |
| dma_cap_set(DMA_MEMSET, plat_data->cap_mask); |
| dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); |
| dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); |
| dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask); |
| dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask); |
| dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask); |
| break; |
| } |
| } |
| |
| #ifdef CONFIG_MTD_PHYSMAP |
| iq8134x_flash_resource.end = iq8134x_flash_resource.start + |
| iq8134x_probe_flash_size() - 1; |
| if (iq8134x_flash_resource.end > iq8134x_flash_resource.start) |
| iop13xx_devices[plat_idx++] = &iq8134x_flash; |
| else |
| printk(KERN_ERR "%s: Failed to probe flash size\n", __func__); |
| #endif |
| |
| platform_add_devices(iop13xx_devices, plat_idx); |
| } |
| |
| static int __init iop13xx_init_uart_setup(char *str) |
| { |
| if (str) { |
| while (*str != '\0') { |
| switch(*str) { |
| case '0': |
| init_uart |= IOP13XX_INIT_UART_0; |
| break; |
| case '1': |
| init_uart |= IOP13XX_INIT_UART_1; |
| break; |
| case ',': |
| case '=': |
| break; |
| default: |
| PRINTK("\"iop13xx_init_uart\" malformed" |
| " at character: \'%c\'", *str); |
| *(str + 1) = '\0'; |
| init_uart = IOP13XX_INIT_UART_DEFAULT; |
| } |
| str++; |
| } |
| } |
| return 1; |
| } |
| |
| static int __init iop13xx_init_i2c_setup(char *str) |
| { |
| if (str) { |
| while (*str != '\0') { |
| switch(*str) { |
| case '0': |
| init_i2c |= IOP13XX_INIT_I2C_0; |
| break; |
| case '1': |
| init_i2c |= IOP13XX_INIT_I2C_1; |
| break; |
| case '2': |
| init_i2c |= IOP13XX_INIT_I2C_2; |
| break; |
| case ',': |
| case '=': |
| break; |
| default: |
| PRINTK("\"iop13xx_init_i2c\" malformed" |
| " at character: \'%c\'", *str); |
| *(str + 1) = '\0'; |
| init_i2c = IOP13XX_INIT_I2C_DEFAULT; |
| } |
| str++; |
| } |
| } |
| return 1; |
| } |
| |
| static int __init iop13xx_init_adma_setup(char *str) |
| { |
| if (str) { |
| while (*str != '\0') { |
| switch (*str) { |
| case '0': |
| init_adma |= IOP13XX_INIT_ADMA_0; |
| break; |
| case '1': |
| init_adma |= IOP13XX_INIT_ADMA_1; |
| break; |
| case '2': |
| init_adma |= IOP13XX_INIT_ADMA_2; |
| break; |
| case ',': |
| case '=': |
| break; |
| default: |
| PRINTK("\"iop13xx_init_adma\" malformed" |
| " at character: \'%c\'", *str); |
| *(str + 1) = '\0'; |
| init_adma = IOP13XX_INIT_ADMA_DEFAULT; |
| } |
| str++; |
| } |
| } |
| return 1; |
| } |
| |
| __setup("iop13xx_init_adma", iop13xx_init_adma_setup); |
| __setup("iop13xx_init_uart", iop13xx_init_uart_setup); |
| __setup("iop13xx_init_i2c", iop13xx_init_i2c_setup); |