| /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*- |
| */ |
| /* |
| * |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/acpi.h> |
| #include <drm/drmP.h> |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include "intel_drv.h" |
| |
| #include <linux/console.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <drm/drm_crtc_helper.h> |
| |
| static struct drm_driver driver; |
| |
| #define GEN_DEFAULT_PIPEOFFSETS \ |
| .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \ |
| PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \ |
| .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \ |
| TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }, \ |
| .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET } |
| |
| #define GEN_CHV_PIPEOFFSETS \ |
| .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \ |
| CHV_PIPE_C_OFFSET }, \ |
| .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \ |
| CHV_TRANSCODER_C_OFFSET, }, \ |
| .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET, \ |
| CHV_PALETTE_C_OFFSET } |
| |
| #define CURSOR_OFFSETS \ |
| .cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET } |
| |
| #define IVB_CURSOR_OFFSETS \ |
| .cursor_offsets = { CURSOR_A_OFFSET, IVB_CURSOR_B_OFFSET, IVB_CURSOR_C_OFFSET } |
| |
| static const struct intel_device_info intel_i830_info = { |
| .gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2, |
| .has_overlay = 1, .overlay_needs_physical = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_845g_info = { |
| .gen = 2, .num_pipes = 1, |
| .has_overlay = 1, .overlay_needs_physical = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_i85x_info = { |
| .gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2, |
| .cursor_needs_physical = 1, |
| .has_overlay = 1, .overlay_needs_physical = 1, |
| .has_fbc = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_i865g_info = { |
| .gen = 2, .num_pipes = 1, |
| .has_overlay = 1, .overlay_needs_physical = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_i915g_info = { |
| .gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2, |
| .has_overlay = 1, .overlay_needs_physical = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| static const struct intel_device_info intel_i915gm_info = { |
| .gen = 3, .is_mobile = 1, .num_pipes = 2, |
| .cursor_needs_physical = 1, |
| .has_overlay = 1, .overlay_needs_physical = 1, |
| .supports_tv = 1, |
| .has_fbc = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| static const struct intel_device_info intel_i945g_info = { |
| .gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2, |
| .has_overlay = 1, .overlay_needs_physical = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| static const struct intel_device_info intel_i945gm_info = { |
| .gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2, |
| .has_hotplug = 1, .cursor_needs_physical = 1, |
| .has_overlay = 1, .overlay_needs_physical = 1, |
| .supports_tv = 1, |
| .has_fbc = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_i965g_info = { |
| .gen = 4, .is_broadwater = 1, .num_pipes = 2, |
| .has_hotplug = 1, |
| .has_overlay = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_i965gm_info = { |
| .gen = 4, .is_crestline = 1, .num_pipes = 2, |
| .is_mobile = 1, .has_fbc = 1, .has_hotplug = 1, |
| .has_overlay = 1, |
| .supports_tv = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_g33_info = { |
| .gen = 3, .is_g33 = 1, .num_pipes = 2, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .has_overlay = 1, |
| .ring_mask = RENDER_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_g45_info = { |
| .gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2, |
| .has_pipe_cxsr = 1, .has_hotplug = 1, |
| .ring_mask = RENDER_RING | BSD_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_gm45_info = { |
| .gen = 4, .is_g4x = 1, .num_pipes = 2, |
| .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, |
| .has_pipe_cxsr = 1, .has_hotplug = 1, |
| .supports_tv = 1, |
| .ring_mask = RENDER_RING | BSD_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_pineview_info = { |
| .gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .has_overlay = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_ironlake_d_info = { |
| .gen = 5, .num_pipes = 2, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .ring_mask = RENDER_RING | BSD_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_ironlake_m_info = { |
| .gen = 5, .is_mobile = 1, .num_pipes = 2, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .has_fbc = 1, |
| .ring_mask = RENDER_RING | BSD_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_sandybridge_d_info = { |
| .gen = 6, .num_pipes = 2, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .has_fbc = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING, |
| .has_llc = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_sandybridge_m_info = { |
| .gen = 6, .is_mobile = 1, .num_pipes = 2, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .has_fbc = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING, |
| .has_llc = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| #define GEN7_FEATURES \ |
| .gen = 7, .num_pipes = 3, \ |
| .need_gfx_hws = 1, .has_hotplug = 1, \ |
| .has_fbc = 1, \ |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING, \ |
| .has_llc = 1 |
| |
| static const struct intel_device_info intel_ivybridge_d_info = { |
| GEN7_FEATURES, |
| .is_ivybridge = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_ivybridge_m_info = { |
| GEN7_FEATURES, |
| .is_ivybridge = 1, |
| .is_mobile = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_ivybridge_q_info = { |
| GEN7_FEATURES, |
| .is_ivybridge = 1, |
| .num_pipes = 0, /* legal, last one wins */ |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_valleyview_m_info = { |
| GEN7_FEATURES, |
| .is_mobile = 1, |
| .num_pipes = 2, |
| .is_valleyview = 1, |
| .display_mmio_offset = VLV_DISPLAY_BASE, |
| .has_fbc = 0, /* legal, last one wins */ |
| .has_llc = 0, /* legal, last one wins */ |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_valleyview_d_info = { |
| GEN7_FEATURES, |
| .num_pipes = 2, |
| .is_valleyview = 1, |
| .display_mmio_offset = VLV_DISPLAY_BASE, |
| .has_fbc = 0, /* legal, last one wins */ |
| .has_llc = 0, /* legal, last one wins */ |
| GEN_DEFAULT_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_haswell_d_info = { |
| GEN7_FEATURES, |
| .is_haswell = 1, |
| .has_ddi = 1, |
| .has_fpga_dbg = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_haswell_m_info = { |
| GEN7_FEATURES, |
| .is_haswell = 1, |
| .is_mobile = 1, |
| .has_ddi = 1, |
| .has_fpga_dbg = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING, |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_broadwell_d_info = { |
| .gen = 8, .num_pipes = 3, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING, |
| .has_llc = 1, |
| .has_ddi = 1, |
| .has_fbc = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_broadwell_m_info = { |
| .gen = 8, .is_mobile = 1, .num_pipes = 3, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING, |
| .has_llc = 1, |
| .has_ddi = 1, |
| .has_fbc = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_broadwell_gt3d_info = { |
| .gen = 8, .num_pipes = 3, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING, |
| .has_llc = 1, |
| .has_ddi = 1, |
| .has_fbc = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_broadwell_gt3m_info = { |
| .gen = 8, .is_mobile = 1, .num_pipes = 3, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING, |
| .has_llc = 1, |
| .has_ddi = 1, |
| .has_fbc = 1, |
| GEN_DEFAULT_PIPEOFFSETS, |
| IVB_CURSOR_OFFSETS, |
| }; |
| |
| static const struct intel_device_info intel_cherryview_info = { |
| .is_preliminary = 1, |
| .gen = 8, .num_pipes = 3, |
| .need_gfx_hws = 1, .has_hotplug = 1, |
| .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING, |
| .is_valleyview = 1, |
| .display_mmio_offset = VLV_DISPLAY_BASE, |
| GEN_CHV_PIPEOFFSETS, |
| CURSOR_OFFSETS, |
| }; |
| |
| /* |
| * Make sure any device matches here are from most specific to most |
| * general. For example, since the Quanta match is based on the subsystem |
| * and subvendor IDs, we need it to come before the more general IVB |
| * PCI ID matches, otherwise we'll use the wrong info struct above. |
| */ |
| #define INTEL_PCI_IDS \ |
| INTEL_I830_IDS(&intel_i830_info), \ |
| INTEL_I845G_IDS(&intel_845g_info), \ |
| INTEL_I85X_IDS(&intel_i85x_info), \ |
| INTEL_I865G_IDS(&intel_i865g_info), \ |
| INTEL_I915G_IDS(&intel_i915g_info), \ |
| INTEL_I915GM_IDS(&intel_i915gm_info), \ |
| INTEL_I945G_IDS(&intel_i945g_info), \ |
| INTEL_I945GM_IDS(&intel_i945gm_info), \ |
| INTEL_I965G_IDS(&intel_i965g_info), \ |
| INTEL_G33_IDS(&intel_g33_info), \ |
| INTEL_I965GM_IDS(&intel_i965gm_info), \ |
| INTEL_GM45_IDS(&intel_gm45_info), \ |
| INTEL_G45_IDS(&intel_g45_info), \ |
| INTEL_PINEVIEW_IDS(&intel_pineview_info), \ |
| INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info), \ |
| INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info), \ |
| INTEL_SNB_D_IDS(&intel_sandybridge_d_info), \ |
| INTEL_SNB_M_IDS(&intel_sandybridge_m_info), \ |
| INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \ |
| INTEL_IVB_M_IDS(&intel_ivybridge_m_info), \ |
| INTEL_IVB_D_IDS(&intel_ivybridge_d_info), \ |
| INTEL_HSW_D_IDS(&intel_haswell_d_info), \ |
| INTEL_HSW_M_IDS(&intel_haswell_m_info), \ |
| INTEL_VLV_M_IDS(&intel_valleyview_m_info), \ |
| INTEL_VLV_D_IDS(&intel_valleyview_d_info), \ |
| INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info), \ |
| INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info), \ |
| INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info), \ |
| INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info), \ |
| INTEL_CHV_IDS(&intel_cherryview_info) |
| |
| static const struct pci_device_id pciidlist[] = { /* aka */ |
| INTEL_PCI_IDS, |
| {0, 0, 0} |
| }; |
| |
| #if defined(CONFIG_DRM_I915_KMS) |
| MODULE_DEVICE_TABLE(pci, pciidlist); |
| #endif |
| |
| void intel_detect_pch(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct pci_dev *pch = NULL; |
| |
| /* In all current cases, num_pipes is equivalent to the PCH_NOP setting |
| * (which really amounts to a PCH but no South Display). |
| */ |
| if (INTEL_INFO(dev)->num_pipes == 0) { |
| dev_priv->pch_type = PCH_NOP; |
| return; |
| } |
| |
| /* |
| * The reason to probe ISA bridge instead of Dev31:Fun0 is to |
| * make graphics device passthrough work easy for VMM, that only |
| * need to expose ISA bridge to let driver know the real hardware |
| * underneath. This is a requirement from virtualization team. |
| * |
| * In some virtualized environments (e.g. XEN), there is irrelevant |
| * ISA bridge in the system. To work reliably, we should scan trhough |
| * all the ISA bridge devices and check for the first match, instead |
| * of only checking the first one. |
| */ |
| while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) { |
| if (pch->vendor == PCI_VENDOR_ID_INTEL) { |
| unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK; |
| dev_priv->pch_id = id; |
| |
| if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) { |
| dev_priv->pch_type = PCH_IBX; |
| DRM_DEBUG_KMS("Found Ibex Peak PCH\n"); |
| WARN_ON(!IS_GEN5(dev)); |
| } else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) { |
| dev_priv->pch_type = PCH_CPT; |
| DRM_DEBUG_KMS("Found CougarPoint PCH\n"); |
| WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev))); |
| } else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) { |
| /* PantherPoint is CPT compatible */ |
| dev_priv->pch_type = PCH_CPT; |
| DRM_DEBUG_KMS("Found PantherPoint PCH\n"); |
| WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev))); |
| } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) { |
| dev_priv->pch_type = PCH_LPT; |
| DRM_DEBUG_KMS("Found LynxPoint PCH\n"); |
| WARN_ON(!IS_HASWELL(dev)); |
| WARN_ON(IS_ULT(dev)); |
| } else if (IS_BROADWELL(dev)) { |
| dev_priv->pch_type = PCH_LPT; |
| dev_priv->pch_id = |
| INTEL_PCH_LPT_LP_DEVICE_ID_TYPE; |
| DRM_DEBUG_KMS("This is Broadwell, assuming " |
| "LynxPoint LP PCH\n"); |
| } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { |
| dev_priv->pch_type = PCH_LPT; |
| DRM_DEBUG_KMS("Found LynxPoint LP PCH\n"); |
| WARN_ON(!IS_HASWELL(dev)); |
| WARN_ON(!IS_ULT(dev)); |
| } else |
| continue; |
| |
| break; |
| } |
| } |
| if (!pch) |
| DRM_DEBUG_KMS("No PCH found.\n"); |
| |
| pci_dev_put(pch); |
| } |
| |
| bool i915_semaphore_is_enabled(struct drm_device *dev) |
| { |
| if (INTEL_INFO(dev)->gen < 6) |
| return false; |
| |
| if (i915.semaphores >= 0) |
| return i915.semaphores; |
| |
| #ifdef CONFIG_INTEL_IOMMU |
| /* Enable semaphores on SNB when IO remapping is off */ |
| if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped) |
| return false; |
| #endif |
| |
| return true; |
| } |
| |
| static int i915_drm_freeze(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc; |
| pci_power_t opregion_target_state; |
| |
| /* ignore lid events during suspend */ |
| mutex_lock(&dev_priv->modeset_restore_lock); |
| dev_priv->modeset_restore = MODESET_SUSPENDED; |
| mutex_unlock(&dev_priv->modeset_restore_lock); |
| |
| /* We do a lot of poking in a lot of registers, make sure they work |
| * properly. */ |
| intel_display_set_init_power(dev_priv, true); |
| |
| drm_kms_helper_poll_disable(dev); |
| |
| pci_save_state(dev->pdev); |
| |
| /* If KMS is active, we do the leavevt stuff here */ |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| int error; |
| |
| error = i915_gem_suspend(dev); |
| if (error) { |
| dev_err(&dev->pdev->dev, |
| "GEM idle failed, resume might fail\n"); |
| return error; |
| } |
| |
| flush_delayed_work(&dev_priv->rps.delayed_resume_work); |
| |
| intel_runtime_pm_disable_interrupts(dev); |
| dev_priv->enable_hotplug_processing = false; |
| |
| intel_suspend_gt_powersave(dev); |
| |
| /* |
| * Disable CRTCs directly since we want to preserve sw state |
| * for _thaw. |
| */ |
| drm_modeset_lock_all(dev); |
| for_each_crtc(dev, crtc) { |
| dev_priv->display.crtc_disable(crtc); |
| } |
| drm_modeset_unlock_all(dev); |
| |
| intel_modeset_suspend_hw(dev); |
| } |
| |
| i915_gem_suspend_gtt_mappings(dev); |
| |
| i915_save_state(dev); |
| |
| if (acpi_target_system_state() >= ACPI_STATE_S3) |
| opregion_target_state = PCI_D3cold; |
| else |
| opregion_target_state = PCI_D1; |
| intel_opregion_notify_adapter(dev, opregion_target_state); |
| |
| intel_uncore_forcewake_reset(dev, false); |
| intel_opregion_fini(dev); |
| |
| console_lock(); |
| intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED); |
| console_unlock(); |
| |
| dev_priv->suspend_count++; |
| |
| intel_display_set_init_power(dev_priv, false); |
| |
| return 0; |
| } |
| |
| int i915_suspend(struct drm_device *dev, pm_message_t state) |
| { |
| int error; |
| |
| if (!dev || !dev->dev_private) { |
| DRM_ERROR("dev: %p\n", dev); |
| DRM_ERROR("DRM not initialized, aborting suspend.\n"); |
| return -ENODEV; |
| } |
| |
| if (state.event == PM_EVENT_PRETHAW) |
| return 0; |
| |
| |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| error = i915_drm_freeze(dev); |
| if (error) |
| return error; |
| |
| if (state.event == PM_EVENT_SUSPEND) { |
| /* Shut down the device */ |
| pci_disable_device(dev->pdev); |
| pci_set_power_state(dev->pdev, PCI_D3hot); |
| } |
| |
| return 0; |
| } |
| |
| void intel_console_resume(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, struct drm_i915_private, |
| console_resume_work); |
| struct drm_device *dev = dev_priv->dev; |
| |
| console_lock(); |
| intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING); |
| console_unlock(); |
| } |
| |
| static int i915_drm_thaw_early(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| hsw_disable_pc8(dev_priv); |
| |
| intel_uncore_early_sanitize(dev, true); |
| intel_uncore_sanitize(dev); |
| intel_power_domains_init_hw(dev_priv); |
| |
| return 0; |
| } |
| |
| static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET) && |
| restore_gtt_mappings) { |
| mutex_lock(&dev->struct_mutex); |
| i915_gem_restore_gtt_mappings(dev); |
| mutex_unlock(&dev->struct_mutex); |
| } |
| |
| i915_restore_state(dev); |
| intel_opregion_setup(dev); |
| |
| /* KMS EnterVT equivalent */ |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| intel_init_pch_refclk(dev); |
| drm_mode_config_reset(dev); |
| |
| mutex_lock(&dev->struct_mutex); |
| if (i915_gem_init_hw(dev)) { |
| DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n"); |
| atomic_set_mask(I915_WEDGED, &dev_priv->gpu_error.reset_counter); |
| } |
| mutex_unlock(&dev->struct_mutex); |
| |
| intel_runtime_pm_restore_interrupts(dev); |
| |
| intel_modeset_init_hw(dev); |
| |
| drm_modeset_lock_all(dev); |
| intel_modeset_setup_hw_state(dev, true); |
| drm_modeset_unlock_all(dev); |
| |
| /* |
| * ... but also need to make sure that hotplug processing |
| * doesn't cause havoc. Like in the driver load code we don't |
| * bother with the tiny race here where we might loose hotplug |
| * notifications. |
| * */ |
| intel_hpd_init(dev); |
| dev_priv->enable_hotplug_processing = true; |
| /* Config may have changed between suspend and resume */ |
| drm_helper_hpd_irq_event(dev); |
| } |
| |
| intel_opregion_init(dev); |
| |
| /* |
| * The console lock can be pretty contented on resume due |
| * to all the printk activity. Try to keep it out of the hot |
| * path of resume if possible. |
| */ |
| if (console_trylock()) { |
| intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING); |
| console_unlock(); |
| } else { |
| schedule_work(&dev_priv->console_resume_work); |
| } |
| |
| mutex_lock(&dev_priv->modeset_restore_lock); |
| dev_priv->modeset_restore = MODESET_DONE; |
| mutex_unlock(&dev_priv->modeset_restore_lock); |
| |
| intel_opregion_notify_adapter(dev, PCI_D0); |
| |
| return 0; |
| } |
| |
| static int i915_drm_thaw(struct drm_device *dev) |
| { |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| i915_check_and_clear_faults(dev); |
| |
| return __i915_drm_thaw(dev, true); |
| } |
| |
| static int i915_resume_early(struct drm_device *dev) |
| { |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| /* |
| * We have a resume ordering issue with the snd-hda driver also |
| * requiring our device to be power up. Due to the lack of a |
| * parent/child relationship we currently solve this with an early |
| * resume hook. |
| * |
| * FIXME: This should be solved with a special hdmi sink device or |
| * similar so that power domains can be employed. |
| */ |
| if (pci_enable_device(dev->pdev)) |
| return -EIO; |
| |
| pci_set_master(dev->pdev); |
| |
| return i915_drm_thaw_early(dev); |
| } |
| |
| int i915_resume(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| /* |
| * Platforms with opregion should have sane BIOS, older ones (gen3 and |
| * earlier) need to restore the GTT mappings since the BIOS might clear |
| * all our scratch PTEs. |
| */ |
| ret = __i915_drm_thaw(dev, !dev_priv->opregion.header); |
| if (ret) |
| return ret; |
| |
| drm_kms_helper_poll_enable(dev); |
| return 0; |
| } |
| |
| static int i915_resume_legacy(struct drm_device *dev) |
| { |
| i915_resume_early(dev); |
| i915_resume(dev); |
| |
| return 0; |
| } |
| |
| /** |
| * i915_reset - reset chip after a hang |
| * @dev: drm device to reset |
| * |
| * Reset the chip. Useful if a hang is detected. Returns zero on successful |
| * reset or otherwise an error code. |
| * |
| * Procedure is fairly simple: |
| * - reset the chip using the reset reg |
| * - re-init context state |
| * - re-init hardware status page |
| * - re-init ring buffer |
| * - re-init interrupt state |
| * - re-init display |
| */ |
| int i915_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| bool simulated; |
| int ret; |
| |
| if (!i915.reset) |
| return 0; |
| |
| mutex_lock(&dev->struct_mutex); |
| |
| i915_gem_reset(dev); |
| |
| simulated = dev_priv->gpu_error.stop_rings != 0; |
| |
| ret = intel_gpu_reset(dev); |
| |
| /* Also reset the gpu hangman. */ |
| if (simulated) { |
| DRM_INFO("Simulated gpu hang, resetting stop_rings\n"); |
| dev_priv->gpu_error.stop_rings = 0; |
| if (ret == -ENODEV) { |
| DRM_INFO("Reset not implemented, but ignoring " |
| "error for simulated gpu hangs\n"); |
| ret = 0; |
| } |
| } |
| |
| if (ret) { |
| DRM_ERROR("Failed to reset chip: %i\n", ret); |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /* Ok, now get things going again... */ |
| |
| /* |
| * Everything depends on having the GTT running, so we need to start |
| * there. Fortunately we don't need to do this unless we reset the |
| * chip at a PCI level. |
| * |
| * Next we need to restore the context, but we don't use those |
| * yet either... |
| * |
| * Ring buffer needs to be re-initialized in the KMS case, or if X |
| * was running at the time of the reset (i.e. we weren't VT |
| * switched away). |
| */ |
| if (drm_core_check_feature(dev, DRIVER_MODESET) || |
| !dev_priv->ums.mm_suspended) { |
| dev_priv->ums.mm_suspended = 0; |
| |
| ret = i915_gem_init_hw(dev); |
| mutex_unlock(&dev->struct_mutex); |
| if (ret) { |
| DRM_ERROR("Failed hw init on reset %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * FIXME: This races pretty badly against concurrent holders of |
| * ring interrupts. This is possible since we've started to drop |
| * dev->struct_mutex in select places when waiting for the gpu. |
| */ |
| |
| /* |
| * rps/rc6 re-init is necessary to restore state lost after the |
| * reset and the re-install of gt irqs. Skip for ironlake per |
| * previous concerns that it doesn't respond well to some forms |
| * of re-init after reset. |
| */ |
| if (INTEL_INFO(dev)->gen > 5) |
| intel_reset_gt_powersave(dev); |
| |
| intel_hpd_init(dev); |
| } else { |
| mutex_unlock(&dev->struct_mutex); |
| } |
| |
| return 0; |
| } |
| |
| static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct intel_device_info *intel_info = |
| (struct intel_device_info *) ent->driver_data; |
| |
| if (IS_PRELIMINARY_HW(intel_info) && !i915.preliminary_hw_support) { |
| DRM_INFO("This hardware requires preliminary hardware support.\n" |
| "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n"); |
| return -ENODEV; |
| } |
| |
| /* Only bind to function 0 of the device. Early generations |
| * used function 1 as a placeholder for multi-head. This causes |
| * us confusion instead, especially on the systems where both |
| * functions have the same PCI-ID! |
| */ |
| if (PCI_FUNC(pdev->devfn)) |
| return -ENODEV; |
| |
| driver.driver_features &= ~(DRIVER_USE_AGP); |
| |
| return drm_get_pci_dev(pdev, ent, &driver); |
| } |
| |
| static void |
| i915_pci_remove(struct pci_dev *pdev) |
| { |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| |
| drm_put_dev(dev); |
| } |
| |
| static int i915_pm_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| |
| if (!drm_dev || !drm_dev->dev_private) { |
| dev_err(dev, "DRM not initialized, aborting suspend.\n"); |
| return -ENODEV; |
| } |
| |
| if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_freeze(drm_dev); |
| } |
| |
| static int i915_pm_suspend_late(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| struct drm_i915_private *dev_priv = drm_dev->dev_private; |
| |
| /* |
| * We have a suspedn ordering issue with the snd-hda driver also |
| * requiring our device to be power up. Due to the lack of a |
| * parent/child relationship we currently solve this with an late |
| * suspend hook. |
| * |
| * FIXME: This should be solved with a special hdmi sink device or |
| * similar so that power domains can be employed. |
| */ |
| if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| if (IS_HASWELL(drm_dev) || IS_BROADWELL(drm_dev)) |
| hsw_enable_pc8(dev_priv); |
| |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, PCI_D3hot); |
| |
| return 0; |
| } |
| |
| static int i915_pm_resume_early(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| |
| return i915_resume_early(drm_dev); |
| } |
| |
| static int i915_pm_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| |
| return i915_resume(drm_dev); |
| } |
| |
| static int i915_pm_freeze(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| |
| if (!drm_dev || !drm_dev->dev_private) { |
| dev_err(dev, "DRM not initialized, aborting suspend.\n"); |
| return -ENODEV; |
| } |
| |
| return i915_drm_freeze(drm_dev); |
| } |
| |
| static int i915_pm_thaw_early(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| |
| return i915_drm_thaw_early(drm_dev); |
| } |
| |
| static int i915_pm_thaw(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| |
| return i915_drm_thaw(drm_dev); |
| } |
| |
| static int i915_pm_poweroff(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| |
| return i915_drm_freeze(drm_dev); |
| } |
| |
| static int hsw_runtime_suspend(struct drm_i915_private *dev_priv) |
| { |
| hsw_enable_pc8(dev_priv); |
| |
| return 0; |
| } |
| |
| static int snb_runtime_resume(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| intel_init_pch_refclk(dev); |
| |
| return 0; |
| } |
| |
| static int hsw_runtime_resume(struct drm_i915_private *dev_priv) |
| { |
| hsw_disable_pc8(dev_priv); |
| |
| return 0; |
| } |
| |
| /* |
| * Save all Gunit registers that may be lost after a D3 and a subsequent |
| * S0i[R123] transition. The list of registers needing a save/restore is |
| * defined in the VLV2_S0IXRegs document. This documents marks all Gunit |
| * registers in the following way: |
| * - Driver: saved/restored by the driver |
| * - Punit : saved/restored by the Punit firmware |
| * - No, w/o marking: no need to save/restore, since the register is R/O or |
| * used internally by the HW in a way that doesn't depend |
| * keeping the content across a suspend/resume. |
| * - Debug : used for debugging |
| * |
| * We save/restore all registers marked with 'Driver', with the following |
| * exceptions: |
| * - Registers out of use, including also registers marked with 'Debug'. |
| * These have no effect on the driver's operation, so we don't save/restore |
| * them to reduce the overhead. |
| * - Registers that are fully setup by an initialization function called from |
| * the resume path. For example many clock gating and RPS/RC6 registers. |
| * - Registers that provide the right functionality with their reset defaults. |
| * |
| * TODO: Except for registers that based on the above 3 criteria can be safely |
| * ignored, we save/restore all others, practically treating the HW context as |
| * a black-box for the driver. Further investigation is needed to reduce the |
| * saved/restored registers even further, by following the same 3 criteria. |
| */ |
| static void vlv_save_gunit_s0ix_state(struct drm_i915_private *dev_priv) |
| { |
| struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state; |
| int i; |
| |
| /* GAM 0x4000-0x4770 */ |
| s->wr_watermark = I915_READ(GEN7_WR_WATERMARK); |
| s->gfx_prio_ctrl = I915_READ(GEN7_GFX_PRIO_CTRL); |
| s->arb_mode = I915_READ(ARB_MODE); |
| s->gfx_pend_tlb0 = I915_READ(GEN7_GFX_PEND_TLB0); |
| s->gfx_pend_tlb1 = I915_READ(GEN7_GFX_PEND_TLB1); |
| |
| for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++) |
| s->lra_limits[i] = I915_READ(GEN7_LRA_LIMITS_BASE + i * 4); |
| |
| s->media_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT); |
| s->gfx_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT); |
| |
| s->render_hwsp = I915_READ(RENDER_HWS_PGA_GEN7); |
| s->ecochk = I915_READ(GAM_ECOCHK); |
| s->bsd_hwsp = I915_READ(BSD_HWS_PGA_GEN7); |
| s->blt_hwsp = I915_READ(BLT_HWS_PGA_GEN7); |
| |
| s->tlb_rd_addr = I915_READ(GEN7_TLB_RD_ADDR); |
| |
| /* MBC 0x9024-0x91D0, 0x8500 */ |
| s->g3dctl = I915_READ(VLV_G3DCTL); |
| s->gsckgctl = I915_READ(VLV_GSCKGCTL); |
| s->mbctl = I915_READ(GEN6_MBCTL); |
| |
| /* GCP 0x9400-0x9424, 0x8100-0x810C */ |
| s->ucgctl1 = I915_READ(GEN6_UCGCTL1); |
| s->ucgctl3 = I915_READ(GEN6_UCGCTL3); |
| s->rcgctl1 = I915_READ(GEN6_RCGCTL1); |
| s->rcgctl2 = I915_READ(GEN6_RCGCTL2); |
| s->rstctl = I915_READ(GEN6_RSTCTL); |
| s->misccpctl = I915_READ(GEN7_MISCCPCTL); |
| |
| /* GPM 0xA000-0xAA84, 0x8000-0x80FC */ |
| s->gfxpause = I915_READ(GEN6_GFXPAUSE); |
| s->rpdeuhwtc = I915_READ(GEN6_RPDEUHWTC); |
| s->rpdeuc = I915_READ(GEN6_RPDEUC); |
| s->ecobus = I915_READ(ECOBUS); |
| s->pwrdwnupctl = I915_READ(VLV_PWRDWNUPCTL); |
| s->rp_down_timeout = I915_READ(GEN6_RP_DOWN_TIMEOUT); |
| s->rp_deucsw = I915_READ(GEN6_RPDEUCSW); |
| s->rcubmabdtmr = I915_READ(GEN6_RCUBMABDTMR); |
| s->rcedata = I915_READ(VLV_RCEDATA); |
| s->spare2gh = I915_READ(VLV_SPAREG2H); |
| |
| /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */ |
| s->gt_imr = I915_READ(GTIMR); |
| s->gt_ier = I915_READ(GTIER); |
| s->pm_imr = I915_READ(GEN6_PMIMR); |
| s->pm_ier = I915_READ(GEN6_PMIER); |
| |
| for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++) |
| s->gt_scratch[i] = I915_READ(GEN7_GT_SCRATCH_BASE + i * 4); |
| |
| /* GT SA CZ domain, 0x100000-0x138124 */ |
| s->tilectl = I915_READ(TILECTL); |
| s->gt_fifoctl = I915_READ(GTFIFOCTL); |
| s->gtlc_wake_ctrl = I915_READ(VLV_GTLC_WAKE_CTRL); |
| s->gtlc_survive = I915_READ(VLV_GTLC_SURVIVABILITY_REG); |
| s->pmwgicz = I915_READ(VLV_PMWGICZ); |
| |
| /* Gunit-Display CZ domain, 0x182028-0x1821CF */ |
| s->gu_ctl0 = I915_READ(VLV_GU_CTL0); |
| s->gu_ctl1 = I915_READ(VLV_GU_CTL1); |
| s->clock_gate_dis2 = I915_READ(VLV_GUNIT_CLOCK_GATE2); |
| |
| /* |
| * Not saving any of: |
| * DFT, 0x9800-0x9EC0 |
| * SARB, 0xB000-0xB1FC |
| * GAC, 0x5208-0x524C, 0x14000-0x14C000 |
| * PCI CFG |
| */ |
| } |
| |
| static void vlv_restore_gunit_s0ix_state(struct drm_i915_private *dev_priv) |
| { |
| struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state; |
| u32 val; |
| int i; |
| |
| /* GAM 0x4000-0x4770 */ |
| I915_WRITE(GEN7_WR_WATERMARK, s->wr_watermark); |
| I915_WRITE(GEN7_GFX_PRIO_CTRL, s->gfx_prio_ctrl); |
| I915_WRITE(ARB_MODE, s->arb_mode | (0xffff << 16)); |
| I915_WRITE(GEN7_GFX_PEND_TLB0, s->gfx_pend_tlb0); |
| I915_WRITE(GEN7_GFX_PEND_TLB1, s->gfx_pend_tlb1); |
| |
| for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++) |
| I915_WRITE(GEN7_LRA_LIMITS_BASE + i * 4, s->lra_limits[i]); |
| |
| I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->media_max_req_count); |
| I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->gfx_max_req_count); |
| |
| I915_WRITE(RENDER_HWS_PGA_GEN7, s->render_hwsp); |
| I915_WRITE(GAM_ECOCHK, s->ecochk); |
| I915_WRITE(BSD_HWS_PGA_GEN7, s->bsd_hwsp); |
| I915_WRITE(BLT_HWS_PGA_GEN7, s->blt_hwsp); |
| |
| I915_WRITE(GEN7_TLB_RD_ADDR, s->tlb_rd_addr); |
| |
| /* MBC 0x9024-0x91D0, 0x8500 */ |
| I915_WRITE(VLV_G3DCTL, s->g3dctl); |
| I915_WRITE(VLV_GSCKGCTL, s->gsckgctl); |
| I915_WRITE(GEN6_MBCTL, s->mbctl); |
| |
| /* GCP 0x9400-0x9424, 0x8100-0x810C */ |
| I915_WRITE(GEN6_UCGCTL1, s->ucgctl1); |
| I915_WRITE(GEN6_UCGCTL3, s->ucgctl3); |
| I915_WRITE(GEN6_RCGCTL1, s->rcgctl1); |
| I915_WRITE(GEN6_RCGCTL2, s->rcgctl2); |
| I915_WRITE(GEN6_RSTCTL, s->rstctl); |
| I915_WRITE(GEN7_MISCCPCTL, s->misccpctl); |
| |
| /* GPM 0xA000-0xAA84, 0x8000-0x80FC */ |
| I915_WRITE(GEN6_GFXPAUSE, s->gfxpause); |
| I915_WRITE(GEN6_RPDEUHWTC, s->rpdeuhwtc); |
| I915_WRITE(GEN6_RPDEUC, s->rpdeuc); |
| I915_WRITE(ECOBUS, s->ecobus); |
| I915_WRITE(VLV_PWRDWNUPCTL, s->pwrdwnupctl); |
| I915_WRITE(GEN6_RP_DOWN_TIMEOUT,s->rp_down_timeout); |
| I915_WRITE(GEN6_RPDEUCSW, s->rp_deucsw); |
| I915_WRITE(GEN6_RCUBMABDTMR, s->rcubmabdtmr); |
| I915_WRITE(VLV_RCEDATA, s->rcedata); |
| I915_WRITE(VLV_SPAREG2H, s->spare2gh); |
| |
| /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */ |
| I915_WRITE(GTIMR, s->gt_imr); |
| I915_WRITE(GTIER, s->gt_ier); |
| I915_WRITE(GEN6_PMIMR, s->pm_imr); |
| I915_WRITE(GEN6_PMIER, s->pm_ier); |
| |
| for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++) |
| I915_WRITE(GEN7_GT_SCRATCH_BASE + i * 4, s->gt_scratch[i]); |
| |
| /* GT SA CZ domain, 0x100000-0x138124 */ |
| I915_WRITE(TILECTL, s->tilectl); |
| I915_WRITE(GTFIFOCTL, s->gt_fifoctl); |
| /* |
| * Preserve the GT allow wake and GFX force clock bit, they are not |
| * be restored, as they are used to control the s0ix suspend/resume |
| * sequence by the caller. |
| */ |
| val = I915_READ(VLV_GTLC_WAKE_CTRL); |
| val &= VLV_GTLC_ALLOWWAKEREQ; |
| val |= s->gtlc_wake_ctrl & ~VLV_GTLC_ALLOWWAKEREQ; |
| I915_WRITE(VLV_GTLC_WAKE_CTRL, val); |
| |
| val = I915_READ(VLV_GTLC_SURVIVABILITY_REG); |
| val &= VLV_GFX_CLK_FORCE_ON_BIT; |
| val |= s->gtlc_survive & ~VLV_GFX_CLK_FORCE_ON_BIT; |
| I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val); |
| |
| I915_WRITE(VLV_PMWGICZ, s->pmwgicz); |
| |
| /* Gunit-Display CZ domain, 0x182028-0x1821CF */ |
| I915_WRITE(VLV_GU_CTL0, s->gu_ctl0); |
| I915_WRITE(VLV_GU_CTL1, s->gu_ctl1); |
| I915_WRITE(VLV_GUNIT_CLOCK_GATE2, s->clock_gate_dis2); |
| } |
| |
| int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool force_on) |
| { |
| u32 val; |
| int err; |
| |
| val = I915_READ(VLV_GTLC_SURVIVABILITY_REG); |
| WARN_ON(!!(val & VLV_GFX_CLK_FORCE_ON_BIT) == force_on); |
| |
| #define COND (I915_READ(VLV_GTLC_SURVIVABILITY_REG) & VLV_GFX_CLK_STATUS_BIT) |
| /* Wait for a previous force-off to settle */ |
| if (force_on) { |
| err = wait_for(!COND, 20); |
| if (err) { |
| DRM_ERROR("timeout waiting for GFX clock force-off (%08x)\n", |
| I915_READ(VLV_GTLC_SURVIVABILITY_REG)); |
| return err; |
| } |
| } |
| |
| val = I915_READ(VLV_GTLC_SURVIVABILITY_REG); |
| val &= ~VLV_GFX_CLK_FORCE_ON_BIT; |
| if (force_on) |
| val |= VLV_GFX_CLK_FORCE_ON_BIT; |
| I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val); |
| |
| if (!force_on) |
| return 0; |
| |
| err = wait_for(COND, 20); |
| if (err) |
| DRM_ERROR("timeout waiting for GFX clock force-on (%08x)\n", |
| I915_READ(VLV_GTLC_SURVIVABILITY_REG)); |
| |
| return err; |
| #undef COND |
| } |
| |
| static int vlv_allow_gt_wake(struct drm_i915_private *dev_priv, bool allow) |
| { |
| u32 val; |
| int err = 0; |
| |
| val = I915_READ(VLV_GTLC_WAKE_CTRL); |
| val &= ~VLV_GTLC_ALLOWWAKEREQ; |
| if (allow) |
| val |= VLV_GTLC_ALLOWWAKEREQ; |
| I915_WRITE(VLV_GTLC_WAKE_CTRL, val); |
| POSTING_READ(VLV_GTLC_WAKE_CTRL); |
| |
| #define COND (!!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEACK) == \ |
| allow) |
| err = wait_for(COND, 1); |
| if (err) |
| DRM_ERROR("timeout disabling GT waking\n"); |
| return err; |
| #undef COND |
| } |
| |
| static int vlv_wait_for_gt_wells(struct drm_i915_private *dev_priv, |
| bool wait_for_on) |
| { |
| u32 mask; |
| u32 val; |
| int err; |
| |
| mask = VLV_GTLC_PW_MEDIA_STATUS_MASK | VLV_GTLC_PW_RENDER_STATUS_MASK; |
| val = wait_for_on ? mask : 0; |
| #define COND ((I915_READ(VLV_GTLC_PW_STATUS) & mask) == val) |
| if (COND) |
| return 0; |
| |
| DRM_DEBUG_KMS("waiting for GT wells to go %s (%08x)\n", |
| wait_for_on ? "on" : "off", |
| I915_READ(VLV_GTLC_PW_STATUS)); |
| |
| /* |
| * RC6 transitioning can be delayed up to 2 msec (see |
| * valleyview_enable_rps), use 3 msec for safety. |
| */ |
| err = wait_for(COND, 3); |
| if (err) |
| DRM_ERROR("timeout waiting for GT wells to go %s\n", |
| wait_for_on ? "on" : "off"); |
| |
| return err; |
| #undef COND |
| } |
| |
| static void vlv_check_no_gt_access(struct drm_i915_private *dev_priv) |
| { |
| if (!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEERR)) |
| return; |
| |
| DRM_ERROR("GT register access while GT waking disabled\n"); |
| I915_WRITE(VLV_GTLC_PW_STATUS, VLV_GTLC_ALLOWWAKEERR); |
| } |
| |
| static int vlv_runtime_suspend(struct drm_i915_private *dev_priv) |
| { |
| u32 mask; |
| int err; |
| |
| /* |
| * Bspec defines the following GT well on flags as debug only, so |
| * don't treat them as hard failures. |
| */ |
| (void)vlv_wait_for_gt_wells(dev_priv, false); |
| |
| mask = VLV_GTLC_RENDER_CTX_EXISTS | VLV_GTLC_MEDIA_CTX_EXISTS; |
| WARN_ON((I915_READ(VLV_GTLC_WAKE_CTRL) & mask) != mask); |
| |
| vlv_check_no_gt_access(dev_priv); |
| |
| err = vlv_force_gfx_clock(dev_priv, true); |
| if (err) |
| goto err1; |
| |
| err = vlv_allow_gt_wake(dev_priv, false); |
| if (err) |
| goto err2; |
| vlv_save_gunit_s0ix_state(dev_priv); |
| |
| err = vlv_force_gfx_clock(dev_priv, false); |
| if (err) |
| goto err2; |
| |
| return 0; |
| |
| err2: |
| /* For safety always re-enable waking and disable gfx clock forcing */ |
| vlv_allow_gt_wake(dev_priv, true); |
| err1: |
| vlv_force_gfx_clock(dev_priv, false); |
| |
| return err; |
| } |
| |
| static int vlv_runtime_resume(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| int err; |
| int ret; |
| |
| /* |
| * If any of the steps fail just try to continue, that's the best we |
| * can do at this point. Return the first error code (which will also |
| * leave RPM permanently disabled). |
| */ |
| ret = vlv_force_gfx_clock(dev_priv, true); |
| |
| vlv_restore_gunit_s0ix_state(dev_priv); |
| |
| err = vlv_allow_gt_wake(dev_priv, true); |
| if (!ret) |
| ret = err; |
| |
| err = vlv_force_gfx_clock(dev_priv, false); |
| if (!ret) |
| ret = err; |
| |
| vlv_check_no_gt_access(dev_priv); |
| |
| intel_init_clock_gating(dev); |
| i915_gem_restore_fences(dev); |
| |
| return ret; |
| } |
| |
| static int intel_runtime_suspend(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| if (WARN_ON_ONCE(!(dev_priv->rps.enabled && intel_enable_rc6(dev)))) |
| return -ENODEV; |
| |
| WARN_ON(!HAS_RUNTIME_PM(dev)); |
| assert_force_wake_inactive(dev_priv); |
| |
| DRM_DEBUG_KMS("Suspending device\n"); |
| |
| /* |
| * We could deadlock here in case another thread holding struct_mutex |
| * calls RPM suspend concurrently, since the RPM suspend will wait |
| * first for this RPM suspend to finish. In this case the concurrent |
| * RPM resume will be followed by its RPM suspend counterpart. Still |
| * for consistency return -EAGAIN, which will reschedule this suspend. |
| */ |
| if (!mutex_trylock(&dev->struct_mutex)) { |
| DRM_DEBUG_KMS("device lock contention, deffering suspend\n"); |
| /* |
| * Bump the expiration timestamp, otherwise the suspend won't |
| * be rescheduled. |
| */ |
| pm_runtime_mark_last_busy(device); |
| |
| return -EAGAIN; |
| } |
| /* |
| * We are safe here against re-faults, since the fault handler takes |
| * an RPM reference. |
| */ |
| i915_gem_release_all_mmaps(dev_priv); |
| mutex_unlock(&dev->struct_mutex); |
| |
| /* |
| * rps.work can't be rearmed here, since we get here only after making |
| * sure the GPU is idle and the RPS freq is set to the minimum. See |
| * intel_mark_idle(). |
| */ |
| cancel_work_sync(&dev_priv->rps.work); |
| intel_runtime_pm_disable_interrupts(dev); |
| |
| if (IS_GEN6(dev)) { |
| ret = 0; |
| } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| ret = hsw_runtime_suspend(dev_priv); |
| } else if (IS_VALLEYVIEW(dev)) { |
| ret = vlv_runtime_suspend(dev_priv); |
| } else { |
| ret = -ENODEV; |
| WARN_ON(1); |
| } |
| |
| if (ret) { |
| DRM_ERROR("Runtime suspend failed, disabling it (%d)\n", ret); |
| intel_runtime_pm_restore_interrupts(dev); |
| |
| return ret; |
| } |
| |
| del_timer_sync(&dev_priv->gpu_error.hangcheck_timer); |
| dev_priv->pm.suspended = true; |
| |
| /* |
| * current versions of firmware which depend on this opregion |
| * notification have repurposed the D1 definition to mean |
| * "runtime suspended" vs. what you would normally expect (D3) |
| * to distinguish it from notifications that might be sent |
| * via the suspend path. |
| */ |
| intel_opregion_notify_adapter(dev, PCI_D1); |
| |
| DRM_DEBUG_KMS("Device suspended\n"); |
| return 0; |
| } |
| |
| static int intel_runtime_resume(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| WARN_ON(!HAS_RUNTIME_PM(dev)); |
| |
| DRM_DEBUG_KMS("Resuming device\n"); |
| |
| intel_opregion_notify_adapter(dev, PCI_D0); |
| dev_priv->pm.suspended = false; |
| |
| if (IS_GEN6(dev)) { |
| ret = snb_runtime_resume(dev_priv); |
| } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| ret = hsw_runtime_resume(dev_priv); |
| } else if (IS_VALLEYVIEW(dev)) { |
| ret = vlv_runtime_resume(dev_priv); |
| } else { |
| WARN_ON(1); |
| ret = -ENODEV; |
| } |
| |
| /* |
| * No point of rolling back things in case of an error, as the best |
| * we can do is to hope that things will still work (and disable RPM). |
| */ |
| i915_gem_init_swizzling(dev); |
| gen6_update_ring_freq(dev); |
| |
| intel_runtime_pm_restore_interrupts(dev); |
| intel_reset_gt_powersave(dev); |
| |
| if (ret) |
| DRM_ERROR("Runtime resume failed, disabling it (%d)\n", ret); |
| else |
| DRM_DEBUG_KMS("Device resumed\n"); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops i915_pm_ops = { |
| .suspend = i915_pm_suspend, |
| .suspend_late = i915_pm_suspend_late, |
| .resume_early = i915_pm_resume_early, |
| .resume = i915_pm_resume, |
| .freeze = i915_pm_freeze, |
| .thaw_early = i915_pm_thaw_early, |
| .thaw = i915_pm_thaw, |
| .poweroff = i915_pm_poweroff, |
| .restore_early = i915_pm_resume_early, |
| .restore = i915_pm_resume, |
| .runtime_suspend = intel_runtime_suspend, |
| .runtime_resume = intel_runtime_resume, |
| }; |
| |
| static const struct vm_operations_struct i915_gem_vm_ops = { |
| .fault = i915_gem_fault, |
| .open = drm_gem_vm_open, |
| .close = drm_gem_vm_close, |
| }; |
| |
| static const struct file_operations i915_driver_fops = { |
| .owner = THIS_MODULE, |
| .open = drm_open, |
| .release = drm_release, |
| .unlocked_ioctl = drm_ioctl, |
| .mmap = drm_gem_mmap, |
| .poll = drm_poll, |
| .read = drm_read, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = i915_compat_ioctl, |
| #endif |
| .llseek = noop_llseek, |
| }; |
| |
| static struct drm_driver driver = { |
| /* Don't use MTRRs here; the Xserver or userspace app should |
| * deal with them for Intel hardware. |
| */ |
| .driver_features = |
| DRIVER_USE_AGP | |
| DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME | |
| DRIVER_RENDER, |
| .load = i915_driver_load, |
| .unload = i915_driver_unload, |
| .open = i915_driver_open, |
| .lastclose = i915_driver_lastclose, |
| .preclose = i915_driver_preclose, |
| .postclose = i915_driver_postclose, |
| |
| /* Used in place of i915_pm_ops for non-DRIVER_MODESET */ |
| .suspend = i915_suspend, |
| .resume = i915_resume_legacy, |
| |
| .device_is_agp = i915_driver_device_is_agp, |
| .master_create = i915_master_create, |
| .master_destroy = i915_master_destroy, |
| #if defined(CONFIG_DEBUG_FS) |
| .debugfs_init = i915_debugfs_init, |
| .debugfs_cleanup = i915_debugfs_cleanup, |
| #endif |
| .gem_free_object = i915_gem_free_object, |
| .gem_vm_ops = &i915_gem_vm_ops, |
| |
| .prime_handle_to_fd = drm_gem_prime_handle_to_fd, |
| .prime_fd_to_handle = drm_gem_prime_fd_to_handle, |
| .gem_prime_export = i915_gem_prime_export, |
| .gem_prime_import = i915_gem_prime_import, |
| |
| .dumb_create = i915_gem_dumb_create, |
| .dumb_map_offset = i915_gem_mmap_gtt, |
| .dumb_destroy = drm_gem_dumb_destroy, |
| .ioctls = i915_ioctls, |
| .fops = &i915_driver_fops, |
| .name = DRIVER_NAME, |
| .desc = DRIVER_DESC, |
| .date = DRIVER_DATE, |
| .major = DRIVER_MAJOR, |
| .minor = DRIVER_MINOR, |
| .patchlevel = DRIVER_PATCHLEVEL, |
| }; |
| |
| static struct pci_driver i915_pci_driver = { |
| .name = DRIVER_NAME, |
| .id_table = pciidlist, |
| .probe = i915_pci_probe, |
| .remove = i915_pci_remove, |
| .driver.pm = &i915_pm_ops, |
| }; |
| |
| static int __init i915_init(void) |
| { |
| driver.num_ioctls = i915_max_ioctl; |
| |
| /* |
| * If CONFIG_DRM_I915_KMS is set, default to KMS unless |
| * explicitly disabled with the module pararmeter. |
| * |
| * Otherwise, just follow the parameter (defaulting to off). |
| * |
| * Allow optional vga_text_mode_force boot option to override |
| * the default behavior. |
| */ |
| #if defined(CONFIG_DRM_I915_KMS) |
| if (i915.modeset != 0) |
| driver.driver_features |= DRIVER_MODESET; |
| #endif |
| if (i915.modeset == 1) |
| driver.driver_features |= DRIVER_MODESET; |
| |
| #ifdef CONFIG_VGA_CONSOLE |
| if (vgacon_text_force() && i915.modeset == -1) |
| driver.driver_features &= ~DRIVER_MODESET; |
| #endif |
| |
| if (!(driver.driver_features & DRIVER_MODESET)) { |
| driver.get_vblank_timestamp = NULL; |
| #ifndef CONFIG_DRM_I915_UMS |
| /* Silently fail loading to not upset userspace. */ |
| DRM_DEBUG_DRIVER("KMS and UMS disabled.\n"); |
| return 0; |
| #endif |
| } |
| |
| return drm_pci_init(&driver, &i915_pci_driver); |
| } |
| |
| static void __exit i915_exit(void) |
| { |
| #ifndef CONFIG_DRM_I915_UMS |
| if (!(driver.driver_features & DRIVER_MODESET)) |
| return; /* Never loaded a driver. */ |
| #endif |
| |
| drm_pci_exit(&driver, &i915_pci_driver); |
| } |
| |
| module_init(i915_init); |
| module_exit(i915_exit); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL and additional rights"); |