[PATCH] libata-hp: killl ops->probe_reset
Now that all drivers implementing new EH are converted to new probing
mechanism, ops->probe_reset doesn't have any user. Kill it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 01f2c59..30a6020 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1479,31 +1479,21 @@
down_xfermask = 0;
/* reset and determine device classes */
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- classes[i] = ATA_DEV_UNKNOWN;
+ ap->ops->phy_reset(ap);
- if (ap->ops->probe_reset) {
- rc = ap->ops->probe_reset(ap, classes);
- if (rc) {
- ata_port_printk(ap, KERN_ERR,
- "reset failed (errno=%d)\n", rc);
- return rc;
- }
- } else {
- ap->ops->phy_reset(ap);
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- if (!(ap->flags & ATA_FLAG_DISABLED))
- classes[i] = ap->device[i].class;
- ap->device[i].class = ATA_DEV_UNKNOWN;
- }
+ if (!(ap->flags & ATA_FLAG_DISABLED) &&
+ dev->class != ATA_DEV_UNKNOWN)
+ classes[dev->devno] = dev->class;
+ else
+ classes[dev->devno] = ATA_DEV_NONE;
- ata_port_probe(ap);
+ dev->class = ATA_DEV_UNKNOWN;
}
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- if (classes[i] == ATA_DEV_UNKNOWN)
- classes[i] = ATA_DEV_NONE;
+ ata_port_probe(ap);
/* after the reset the device state is PIO 0 and the controller
state is undefined. Record the mode */
@@ -2610,37 +2600,11 @@
}
/**
- * ata_std_probeinit - initialize probing
- * @ap: port to be probed
- *
- * @ap is about to be probed. Initialize it. This function is
- * to be used as standard callback for ata_drive_probe_reset().
- *
- * NOTE!!! Do not use this function as probeinit if a low level
- * driver implements only hardreset. Just pass NULL as probeinit
- * in that case. Using this function is probably okay but doing
- * so makes reset sequence different from the original
- * ->phy_reset implementation and Jeff nervous. :-P
- */
-void ata_std_probeinit(struct ata_port *ap)
-{
- static const unsigned long deb_timing[] = { 5, 100, 5000 };
-
- /* resume link */
- sata_phy_resume(ap, deb_timing);
-
- /* wait for device */
- if (ata_port_online(ap))
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
-}
-
-/**
* ata_std_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
*
- * Reset host port using ATA SRST. This function is to be used
- * as standard callback for ata_drive_*_reset() functions.
+ * Reset host port using ATA SRST.
*
* LOCKING:
* Kernel thread context (may sleep)
@@ -2695,8 +2659,6 @@
* @class: resulting class of attached device
*
* SATA phy-reset host port using DET bits of SControl register.
- * This function is to be used as standard callback for
- * ata_drive_*_reset().
*
* LOCKING:
* Kernel thread context (may sleep)
@@ -2775,9 +2737,6 @@
* the device might have been reset more than once using
* different reset methods before postreset is invoked.
*
- * This function is to be used as standard callback for
- * ata_drive_*_reset().
- *
* LOCKING:
* Kernel thread context (may sleep)
*/
@@ -2824,32 +2783,6 @@
DPRINTK("EXIT\n");
}
-/**
- * ata_std_probe_reset - standard probe reset method
- * @ap: prot to perform probe-reset
- * @classes: resulting classes of attached devices
- *
- * The stock off-the-shelf ->probe_reset method.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
-{
- ata_reset_fn_t hardreset;
-
- hardreset = NULL;
- if (sata_scr_valid(ap))
- hardreset = sata_std_hardreset;
-
- return ata_drive_probe_reset(ap, ata_std_probeinit,
- ata_std_softreset, hardreset,
- ata_std_postreset, classes);
-}
-
int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset,
unsigned int *classes)
{
@@ -2879,97 +2812,6 @@
}
/**
- * ata_drive_probe_reset - Perform probe reset with given methods
- * @ap: port to reset
- * @probeinit: probeinit method (can be NULL)
- * @softreset: softreset method (can be NULL)
- * @hardreset: hardreset method (can be NULL)
- * @postreset: postreset method (can be NULL)
- * @classes: resulting classes of attached devices
- *
- * Reset the specified port and classify attached devices using
- * given methods. This function prefers softreset but tries all
- * possible reset sequences to reset and classify devices. This
- * function is intended to be used for constructing ->probe_reset
- * callback by low level drivers.
- *
- * Reset methods should follow the following rules.
- *
- * - Return 0 on sucess, -errno on failure.
- * - If classification is supported, fill classes[] with
- * recognized class codes.
- * - If classification is not supported, leave classes[] alone.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV
- * if classification fails, and any error code from reset
- * methods.
- */
-int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
- ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
- ata_postreset_fn_t postreset, unsigned int *classes)
-{
- int rc = -EINVAL;
-
- ata_eh_freeze_port(ap);
-
- if (probeinit)
- probeinit(ap);
-
- if (softreset && !sata_set_spd_needed(ap)) {
- rc = ata_do_reset(ap, softreset, classes);
- if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
- goto done;
- ata_port_printk(ap, KERN_INFO, "softreset failed, "
- "will try hardreset in 5 secs\n");
- ssleep(5);
- }
-
- if (!hardreset)
- goto done;
-
- while (1) {
- rc = ata_do_reset(ap, hardreset, classes);
- if (rc == 0) {
- if (classes[0] != ATA_DEV_UNKNOWN)
- goto done;
- break;
- }
-
- if (sata_down_spd_limit(ap))
- goto done;
-
- ata_port_printk(ap, KERN_INFO, "hardreset failed, "
- "will retry in 5 secs\n");
- ssleep(5);
- }
-
- if (softreset) {
- ata_port_printk(ap, KERN_INFO,
- "hardreset succeeded without classification, "
- "will retry softreset in 5 secs\n");
- ssleep(5);
-
- rc = ata_do_reset(ap, softreset, classes);
- }
-
- done:
- if (rc == 0) {
- if (postreset)
- postreset(ap, classes);
-
- ata_eh_thaw_port(ap);
-
- if (classes[0] == ATA_DEV_UNKNOWN)
- rc = -ENODEV;
- }
- return rc;
-}
-
-/**
* ata_dev_same_device - Determine whether new ID matches configured device
* @dev: device to compare against
* @new_class: class of the new device
@@ -5419,7 +5261,7 @@
DPRINTK("ENTER\n");
- if (!ent->port_ops->probe_reset && !ent->port_ops->error_handler &&
+ if (!ent->port_ops->error_handler &&
!(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
printk(KERN_ERR "ata%u: no reset mechanism available\n",
port_no);
@@ -5551,7 +5393,7 @@
*/
}
- if (!ap->ops->probe_reset) {
+ if (ap->ops->error_handler) {
unsigned long flags;
ata_port_probe(ap);
@@ -5998,13 +5840,10 @@
EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
-EXPORT_SYMBOL_GPL(ata_std_probeinit);
EXPORT_SYMBOL_GPL(ata_std_prereset);
EXPORT_SYMBOL_GPL(ata_std_softreset);
EXPORT_SYMBOL_GPL(sata_std_hardreset);
EXPORT_SYMBOL_GPL(ata_std_postreset);
-EXPORT_SYMBOL_GPL(ata_std_probe_reset);
-EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
EXPORT_SYMBOL_GPL(ata_dev_revalidate);
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_pair);