w83977af_ir: remove two faux Kconfig macros
Ever since v2.3.5 the driver for "Winbond W83977AF (IR)" contains two
unneeded preprocessor macros.
CONFIG_NETWINDER_TX_DMA_PROBLEMS is never defined and can safely be
removed. And CONFIG_NETWINDER_RX_DMA_PROBLEMS is just an alias for
CONFIG_ARCH_NETWINDER, so that (valid) Kconfig macro can be used
instead.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index e641bb2..11dbdf3 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -62,10 +62,6 @@
#include "w83977af.h"
#include "w83977af_ir.h"
-#ifdef CONFIG_ARCH_NETWINDER /* Adjust to NetWinder differences */
-#undef CONFIG_NETWINDER_TX_DMA_PROBLEMS /* Not needed */
-#define CONFIG_NETWINDER_RX_DMA_PROBLEMS /* Must have this one! */
-#endif
#define CONFIG_USE_W977_PNP /* Currently needed */
#define PIO_MAX_SPEED 115200
@@ -332,7 +328,7 @@
w977_write_reg(0x74, dma+1, efbase[i]);
#else
w977_write_reg(0x74, dma, efbase[i]);
-#endif /*CONFIG_ARCH_NETWINDER */
+#endif /* CONFIG_ARCH_NETWINDER */
w977_write_reg(0x75, 0x04, efbase[i]); /* Disable Tx DMA */
/* Set append hardware CRC, enable IR bank selection */
@@ -563,10 +559,6 @@
static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
{
__u8 set;
-#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
- unsigned long flags;
- __u8 hcr;
-#endif
IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len);
/* Save current set */
@@ -579,30 +571,13 @@
/* Choose transmit DMA channel */
switch_bank(iobase, SET2);
outb(ADCR1_D_CHSW|/*ADCR1_DMA_F|*/ADCR1_ADV_SL, iobase+ADCR1);
-#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
- spin_lock_irqsave(&self->lock, flags);
-
- disable_dma(self->io.dma);
- clear_dma_ff(self->io.dma);
- set_dma_mode(self->io.dma, DMA_MODE_READ);
- set_dma_addr(self->io.dma, self->tx_buff_dma);
- set_dma_count(self->io.dma, self->tx_buff.len);
-#else
irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
DMA_MODE_WRITE);
-#endif
self->io.direction = IO_XMIT;
/* Enable DMA */
switch_bank(iobase, SET0);
-#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
- hcr = inb(iobase+HCR);
- outb(hcr | HCR_EN_DMA, iobase+HCR);
- enable_dma(self->io.dma);
- spin_unlock_irqrestore(&self->lock, flags);
-#else
outb(inb(iobase+HCR) | HCR_EN_DMA | HCR_TX_WT, iobase+HCR);
-#endif
/* Restore set register */
outb(set, iobase+SSR);
@@ -711,7 +686,7 @@
{
int iobase;
__u8 set;
-#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+#ifdef CONFIG_ARCH_NETWINDER
unsigned long flags;
__u8 hcr;
#endif
@@ -736,7 +711,7 @@
self->io.direction = IO_RECV;
self->rx_buff.data = self->rx_buff.head;
-#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+#ifdef CONFIG_ARCH_NETWINDER
spin_lock_irqsave(&self->lock, flags);
disable_dma(self->io.dma);
@@ -759,7 +734,7 @@
/* Enable DMA */
switch_bank(iobase, SET0);
-#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+#ifdef CONFIG_ARCH_NETWINDER
hcr = inb(iobase+HCR);
outb(hcr | HCR_EN_DMA, iobase+HCR);
enable_dma(self->io.dma);