| /* |
| * Clock definitions for u8500 platform. |
| * |
| * Copyright (C) 2012 ST-Ericsson SA |
| * Author: Ulf Hansson <ulf.hansson@linaro.org> |
| * |
| * License terms: GNU General Public License (GPL) version 2 |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/mfd/dbx500-prcmu.h> |
| #include <linux/platform_data/clk-ux500.h> |
| #include "clk.h" |
| |
| void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, |
| u32 clkrst5_base, u32 clkrst6_base) |
| { |
| struct prcmu_fw_version *fw_version; |
| const char *sgaclk_parent = NULL; |
| struct clk *clk; |
| |
| /* Clock sources */ |
| clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0, |
| CLK_IS_ROOT|CLK_IGNORE_UNUSED); |
| clk_register_clkdev(clk, "soc0_pll", NULL); |
| |
| clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1, |
| CLK_IS_ROOT|CLK_IGNORE_UNUSED); |
| clk_register_clkdev(clk, "soc1_pll", NULL); |
| |
| clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR, |
| CLK_IS_ROOT|CLK_IGNORE_UNUSED); |
| clk_register_clkdev(clk, "ddr_pll", NULL); |
| |
| /* FIXME: Add sys, ulp and int clocks here. */ |
| |
| clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL", |
| CLK_IS_ROOT|CLK_IGNORE_UNUSED, |
| 32768); |
| clk_register_clkdev(clk, "clk32k", NULL); |
| clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); |
| |
| /* PRCMU clocks */ |
| fw_version = prcmu_get_fw_version(); |
| if (fw_version != NULL) { |
| switch (fw_version->project) { |
| case PRCMU_FW_PROJECT_U8500_C2: |
| case PRCMU_FW_PROJECT_U8520: |
| case PRCMU_FW_PROJECT_U8420: |
| sgaclk_parent = "soc0_pll"; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (sgaclk_parent) |
| clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent, |
| PRCMU_SGACLK, 0); |
| else |
| clk = clk_reg_prcmu_gate("sgclk", NULL, |
| PRCMU_SGACLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "mali"); |
| |
| clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "UART"); |
| |
| clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "MSP02"); |
| |
| clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "MSP1"); |
| |
| clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "I2C"); |
| |
| clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "slim"); |
| |
| clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "PERIPH1"); |
| |
| clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "PERIPH2"); |
| |
| clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "PERIPH3"); |
| |
| clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "PERIPH5"); |
| |
| clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "PERIPH6"); |
| |
| clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "PERIPH7"); |
| |
| clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0, |
| CLK_IS_ROOT|CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "lcd"); |
| clk_register_clkdev(clk, "lcd", "mcde"); |
| |
| clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "bml"); |
| |
| clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0, |
| CLK_IS_ROOT|CLK_SET_RATE_GATE); |
| |
| clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0, |
| CLK_IS_ROOT|CLK_SET_RATE_GATE); |
| |
| clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0, |
| CLK_IS_ROOT|CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "hdmi"); |
| clk_register_clkdev(clk, "hdmi", "mcde"); |
| |
| clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "apeat"); |
| |
| clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK, |
| CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "apetrace"); |
| |
| clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "mcde"); |
| clk_register_clkdev(clk, "mcde", "mcde"); |
| clk_register_clkdev(clk, "dsisys", "dsilink.0"); |
| clk_register_clkdev(clk, "dsisys", "dsilink.1"); |
| clk_register_clkdev(clk, "dsisys", "dsilink.2"); |
| |
| clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK, |
| CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "ipi2"); |
| |
| clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK, |
| CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "dsialt"); |
| |
| clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "dma40.0"); |
| |
| clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "b2r2"); |
| clk_register_clkdev(clk, NULL, "b2r2_core"); |
| clk_register_clkdev(clk, NULL, "U8500-B2R2.0"); |
| |
| clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0, |
| CLK_IS_ROOT|CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "tv"); |
| clk_register_clkdev(clk, "tv", "mcde"); |
| |
| clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "SSP"); |
| |
| clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "rngclk"); |
| |
| clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "uicc"); |
| |
| clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT); |
| clk_register_clkdev(clk, NULL, "mtu0"); |
| clk_register_clkdev(clk, NULL, "mtu1"); |
| |
| clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK, |
| 100000000, |
| CLK_IS_ROOT|CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "sdmmc"); |
| |
| clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", |
| PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, "dsihs2", "mcde"); |
| clk_register_clkdev(clk, "dsihs2", "dsilink.2"); |
| |
| |
| clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll", |
| PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, "dsihs0", "mcde"); |
| clk_register_clkdev(clk, "dsihs0", "dsilink.0"); |
| |
| clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll", |
| PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, "dsihs1", "mcde"); |
| clk_register_clkdev(clk, "dsihs1", "dsilink.1"); |
| |
| clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk", |
| PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, "dsilp0", "dsilink.0"); |
| clk_register_clkdev(clk, "dsilp0", "mcde"); |
| |
| clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk", |
| PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, "dsilp1", "dsilink.1"); |
| clk_register_clkdev(clk, "dsilp1", "mcde"); |
| |
| clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk", |
| PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, "dsilp2", "dsilink.2"); |
| clk_register_clkdev(clk, "dsilp2", "mcde"); |
| |
| clk = clk_reg_prcmu_scalable_rate("armss", NULL, |
| PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED); |
| clk_register_clkdev(clk, "armss", NULL); |
| |
| clk = clk_register_fixed_factor(NULL, "smp_twd", "armss", |
| CLK_IGNORE_UNUSED, 1, 2); |
| clk_register_clkdev(clk, NULL, "smp_twd"); |
| |
| /* |
| * FIXME: Add special handled PRCMU clocks here: |
| * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. |
| * 2. ab9540_clkout1yuv, see clkout0yuv |
| */ |
| |
| /* PRCC P-clocks */ |
| clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", clkrst1_base, |
| BIT(0), 0); |
| clk_register_clkdev(clk, "apb_pclk", "uart0"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", clkrst1_base, |
| BIT(1), 0); |
| clk_register_clkdev(clk, "apb_pclk", "uart1"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", clkrst1_base, |
| BIT(2), 0); |
| clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", clkrst1_base, |
| BIT(3), 0); |
| clk_register_clkdev(clk, "apb_pclk", "msp0"); |
| clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", clkrst1_base, |
| BIT(4), 0); |
| clk_register_clkdev(clk, "apb_pclk", "msp1"); |
| clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", clkrst1_base, |
| BIT(5), 0); |
| clk_register_clkdev(clk, "apb_pclk", "sdi0"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", clkrst1_base, |
| BIT(6), 0); |
| clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", clkrst1_base, |
| BIT(7), 0); |
| clk_register_clkdev(clk, NULL, "spi3"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", clkrst1_base, |
| BIT(8), 0); |
| clk_register_clkdev(clk, "apb_pclk", "slimbus0"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", clkrst1_base, |
| BIT(9), 0); |
| clk_register_clkdev(clk, NULL, "gpio.0"); |
| clk_register_clkdev(clk, NULL, "gpio.1"); |
| clk_register_clkdev(clk, NULL, "gpioblock0"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", clkrst1_base, |
| BIT(10), 0); |
| clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); |
| |
| clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", clkrst1_base, |
| BIT(11), 0); |
| clk_register_clkdev(clk, "apb_pclk", "msp3"); |
| clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", clkrst2_base, |
| BIT(0), 0); |
| clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", clkrst2_base, |
| BIT(1), 0); |
| clk_register_clkdev(clk, NULL, "spi2"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", clkrst2_base, |
| BIT(2), 0); |
| clk_register_clkdev(clk, NULL, "spi1"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", clkrst2_base, |
| BIT(3), 0); |
| clk_register_clkdev(clk, NULL, "pwl"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", clkrst2_base, |
| BIT(4), 0); |
| clk_register_clkdev(clk, "apb_pclk", "sdi4"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", clkrst2_base, |
| BIT(5), 0); |
| clk_register_clkdev(clk, "apb_pclk", "msp2"); |
| clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", clkrst2_base, |
| BIT(6), 0); |
| clk_register_clkdev(clk, "apb_pclk", "sdi1"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", clkrst2_base, |
| BIT(7), 0); |
| clk_register_clkdev(clk, "apb_pclk", "sdi3"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", clkrst2_base, |
| BIT(8), 0); |
| clk_register_clkdev(clk, NULL, "spi0"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", clkrst2_base, |
| BIT(9), 0); |
| clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base, |
| BIT(10), 0); |
| clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base, |
| BIT(11), 0); |
| clk_register_clkdev(clk, NULL, "gpio.6"); |
| clk_register_clkdev(clk, NULL, "gpio.7"); |
| clk_register_clkdev(clk, NULL, "gpioblock1"); |
| |
| clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base, |
| BIT(12), 0); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base, |
| BIT(0), 0); |
| clk_register_clkdev(clk, "fsmc", NULL); |
| clk_register_clkdev(clk, NULL, "smsc911x"); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base, |
| BIT(1), 0); |
| clk_register_clkdev(clk, "apb_pclk", "ssp0"); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", clkrst3_base, |
| BIT(2), 0); |
| clk_register_clkdev(clk, "apb_pclk", "ssp1"); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", clkrst3_base, |
| BIT(3), 0); |
| clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", clkrst3_base, |
| BIT(4), 0); |
| clk_register_clkdev(clk, "apb_pclk", "sdi2"); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", clkrst3_base, |
| BIT(5), 0); |
| clk_register_clkdev(clk, "apb_pclk", "ske"); |
| clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad"); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", clkrst3_base, |
| BIT(6), 0); |
| clk_register_clkdev(clk, "apb_pclk", "uart2"); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", clkrst3_base, |
| BIT(7), 0); |
| clk_register_clkdev(clk, "apb_pclk", "sdi5"); |
| |
| clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", clkrst3_base, |
| BIT(8), 0); |
| clk_register_clkdev(clk, NULL, "gpio.2"); |
| clk_register_clkdev(clk, NULL, "gpio.3"); |
| clk_register_clkdev(clk, NULL, "gpio.4"); |
| clk_register_clkdev(clk, NULL, "gpio.5"); |
| clk_register_clkdev(clk, NULL, "gpioblock2"); |
| |
| clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", clkrst5_base, |
| BIT(0), 0); |
| clk_register_clkdev(clk, "usb", "musb-ux500.0"); |
| |
| clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", clkrst5_base, |
| BIT(1), 0); |
| clk_register_clkdev(clk, NULL, "gpio.8"); |
| clk_register_clkdev(clk, NULL, "gpioblock3"); |
| |
| clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", clkrst6_base, |
| BIT(0), 0); |
| clk_register_clkdev(clk, "apb_pclk", "rng"); |
| |
| clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", clkrst6_base, |
| BIT(1), 0); |
| clk_register_clkdev(clk, NULL, "cryp0"); |
| clk_register_clkdev(clk, NULL, "cryp1"); |
| |
| clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", clkrst6_base, |
| BIT(2), 0); |
| clk_register_clkdev(clk, NULL, "hash0"); |
| |
| clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", clkrst6_base, |
| BIT(3), 0); |
| clk_register_clkdev(clk, NULL, "pka"); |
| |
| clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", clkrst6_base, |
| BIT(4), 0); |
| clk_register_clkdev(clk, NULL, "hash1"); |
| |
| clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", clkrst6_base, |
| BIT(5), 0); |
| clk_register_clkdev(clk, NULL, "cfgreg"); |
| |
| clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", clkrst6_base, |
| BIT(6), 0); |
| clk_register_clkdev(clk, "apb_pclk", "mtu0"); |
| |
| clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", clkrst6_base, |
| BIT(7), 0); |
| clk_register_clkdev(clk, "apb_pclk", "mtu1"); |
| |
| /* PRCC K-clocks |
| * |
| * FIXME: Some drivers requires PERPIH[n| to be automatically enabled |
| * by enabling just the K-clock, even if it is not a valid parent to |
| * the K-clock. Until drivers get fixed we might need some kind of |
| * "parent muxed join". |
| */ |
| |
| /* Periph1 */ |
| clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk", |
| clkrst1_base, BIT(0), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "uart0"); |
| |
| clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk", |
| clkrst1_base, BIT(1), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "uart1"); |
| |
| clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", |
| clkrst1_base, BIT(2), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "nmk-i2c.1"); |
| |
| clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", |
| clkrst1_base, BIT(3), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "msp0"); |
| clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0"); |
| |
| clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", |
| clkrst1_base, BIT(4), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "msp1"); |
| clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1"); |
| |
| clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", |
| clkrst1_base, BIT(5), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "sdi0"); |
| |
| clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", |
| clkrst1_base, BIT(6), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "nmk-i2c.2"); |
| |
| clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", |
| clkrst1_base, BIT(8), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "slimbus0"); |
| |
| clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", |
| clkrst1_base, BIT(9), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "nmk-i2c.4"); |
| |
| clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", |
| clkrst1_base, BIT(10), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "msp3"); |
| clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3"); |
| |
| /* Periph2 */ |
| clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", |
| clkrst2_base, BIT(0), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "nmk-i2c.3"); |
| |
| clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", |
| clkrst2_base, BIT(2), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "sdi4"); |
| |
| clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", |
| clkrst2_base, BIT(3), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "msp2"); |
| clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2"); |
| |
| clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", |
| clkrst2_base, BIT(4), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "sdi1"); |
| |
| clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk", |
| clkrst2_base, BIT(5), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "sdi3"); |
| |
| /* Note that rate is received from parent. */ |
| clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk", |
| clkrst2_base, BIT(6), |
| CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT); |
| clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk", |
| clkrst2_base, BIT(7), |
| CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT); |
| |
| /* Periph3 */ |
| clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", |
| clkrst3_base, BIT(1), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "ssp0"); |
| |
| clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", |
| clkrst3_base, BIT(2), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "ssp1"); |
| |
| clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", |
| clkrst3_base, BIT(3), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "nmk-i2c.0"); |
| |
| clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", |
| clkrst3_base, BIT(4), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "sdi2"); |
| |
| clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k", |
| clkrst3_base, BIT(5), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "ske"); |
| clk_register_clkdev(clk, NULL, "nmk-ske-keypad"); |
| |
| clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk", |
| clkrst3_base, BIT(6), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "uart2"); |
| |
| clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk", |
| clkrst3_base, BIT(7), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "sdi5"); |
| |
| /* Periph6 */ |
| clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk", |
| clkrst6_base, BIT(0), CLK_SET_RATE_GATE); |
| clk_register_clkdev(clk, NULL, "rng"); |
| } |