powerpc/pseries: Move architecture vector definitions to prom.h
As part of handling of PRRN events we need to check vector 5 of the
architecture vector bits reported in the device tree to ensure PRRN event
handling is enabled. To do this firmware_has_feature() is updated (in a
subsequent patch) to make this check vector 5 bits. To avoid having to
re-define bits in the architecture vector the bit definitions are moved
to prom.h.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 99c92d5..811b780 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -74,6 +74,77 @@
#define DRCONF_MEM_AI_INVALID 0x00000040
#define DRCONF_MEM_RESERVED 0x00000080
+/*
+ * There are two methods for telling firmware what our capabilities are.
+ * Newer machines have an "ibm,client-architecture-support" method on the
+ * root node. For older machines, we have to call the "process-elf-header"
+ * method in the /packages/elf-loader node, passing it a fake 32-bit
+ * ELF header containing a couple of PT_NOTE sections that contain
+ * structures that contain various information.
+ */
+
+/* New method - extensible architecture description vector. */
+
+/* Option vector bits - generic bits in byte 1 */
+#define OV_IGNORE 0x80 /* ignore this vector */
+#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/
+
+/* Option vector 1: processor architectures supported */
+#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */
+#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */
+#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */
+#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */
+#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
+#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
+#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */
+#define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */
+
+/* Option vector 2: Open Firmware options supported */
+#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
+
+/* Option vector 3: processor options supported */
+#define OV3_FP 0x80 /* floating point */
+#define OV3_VMX 0x40 /* VMX/Altivec */
+#define OV3_DFP 0x20 /* decimal FP */
+
+/* Option vector 4: IBM PAPR implementation */
+#define OV4_MIN_ENT_CAP 0x01 /* minimum VP entitled capacity */
+
+/* Option vector 5: PAPR/OF options supported */
+#define OV5_LPAR 0x80 /* logical partitioning supported */
+#define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */
+/* ibm,dynamic-reconfiguration-memory property supported */
+#define OV5_DRCONF_MEMORY 0x20
+#define OV5_LARGE_PAGES 0x10 /* large pages supported */
+#define OV5_DONATE_DEDICATE_CPU 0x02 /* donate dedicated CPU support */
+/* PCIe/MSI support. Without MSI full PCIe is not supported */
+#ifdef CONFIG_PCI_MSI
+#define OV5_MSI 0x01 /* PCIe/MSI support */
+#else
+#define OV5_MSI 0x00
+#endif /* CONFIG_PCI_MSI */
+#ifdef CONFIG_PPC_SMLPAR
+#define OV5_CMO 0x80 /* Cooperative Memory Overcommitment */
+#define OV5_XCMO 0x40 /* Page Coalescing */
+#else
+#define OV5_CMO 0x00
+#define OV5_XCMO 0x00
+#endif
+#define OV5_TYPE1_AFFINITY 0x80 /* Type 1 NUMA affinity */
+#define OV5_PFO_HW_RNG 0x80 /* PFO Random Number Generator */
+#define OV5_PFO_HW_842 0x40 /* PFO Compression Accelerator */
+#define OV5_PFO_HW_ENCR 0x20 /* PFO Encryption Accelerator */
+#define OV5_SUB_PROCESSORS 0x01 /* 1,2,or 4 Sub-Processors supported */
+
+/* Option Vector 6: IBM PAPR hints */
+#define OV6_LINUX 0x02 /* Linux is our OS */
+
+/*
+ * The architecture vector has an array of PVR mask/value pairs,
+ * followed by # option vectors - 1, followed by the option vectors.
+ */
+extern unsigned char ibm_architecture_vec[];
+
/* These includes are put at the bottom because they may contain things
* that are overridden by this file. Ideally they shouldn't be included
* by this file, but there are a bunch of .c files that currently depend
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 13f8d16..4a9e50c 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -627,16 +627,11 @@
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
- * There are two methods for telling firmware what our capabilities are.
- * Newer machines have an "ibm,client-architecture-support" method on the
- * root node. For older machines, we have to call the "process-elf-header"
- * method in the /packages/elf-loader node, passing it a fake 32-bit
- * ELF header containing a couple of PT_NOTE sections that contain
- * structures that contain various information.
- */
-
-/*
- * New method - extensible architecture description vector.
+ * The architecture vector has an array of PVR mask/value pairs,
+ * followed by # option vectors - 1, followed by the option vectors.
+ *
+ * See prom.h for the definition of the bits specified in the
+ * architecture vector.
*
* Because the description vector contains a mix of byte and word
* values, we declare it as an unsigned char array, and use this
@@ -645,65 +640,7 @@
#define W(x) ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
((x) >> 8) & 0xff, (x) & 0xff
-/* Option vector bits - generic bits in byte 1 */
-#define OV_IGNORE 0x80 /* ignore this vector */
-#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/
-
-/* Option vector 1: processor architectures supported */
-#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */
-#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */
-#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */
-#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */
-#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
-#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
-#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */
-#define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */
-
-/* Option vector 2: Open Firmware options supported */
-#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
-
-/* Option vector 3: processor options supported */
-#define OV3_FP 0x80 /* floating point */
-#define OV3_VMX 0x40 /* VMX/Altivec */
-#define OV3_DFP 0x20 /* decimal FP */
-
-/* Option vector 4: IBM PAPR implementation */
-#define OV4_MIN_ENT_CAP 0x01 /* minimum VP entitled capacity */
-
-/* Option vector 5: PAPR/OF options supported */
-#define OV5_LPAR 0x80 /* logical partitioning supported */
-#define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */
-/* ibm,dynamic-reconfiguration-memory property supported */
-#define OV5_DRCONF_MEMORY 0x20
-#define OV5_LARGE_PAGES 0x10 /* large pages supported */
-#define OV5_DONATE_DEDICATE_CPU 0x02 /* donate dedicated CPU support */
-/* PCIe/MSI support. Without MSI full PCIe is not supported */
-#ifdef CONFIG_PCI_MSI
-#define OV5_MSI 0x01 /* PCIe/MSI support */
-#else
-#define OV5_MSI 0x00
-#endif /* CONFIG_PCI_MSI */
-#ifdef CONFIG_PPC_SMLPAR
-#define OV5_CMO 0x80 /* Cooperative Memory Overcommitment */
-#define OV5_XCMO 0x40 /* Page Coalescing */
-#else
-#define OV5_CMO 0x00
-#define OV5_XCMO 0x00
-#endif
-#define OV5_TYPE1_AFFINITY 0x80 /* Type 1 NUMA affinity */
-#define OV5_PFO_HW_RNG 0x80 /* PFO Random Number Generator */
-#define OV5_PFO_HW_842 0x40 /* PFO Compression Accelerator */
-#define OV5_PFO_HW_ENCR 0x20 /* PFO Encryption Accelerator */
-#define OV5_SUB_PROCESSORS 0x01 /* 1,2,or 4 Sub-Processors supported */
-
-/* Option Vector 6: IBM PAPR hints */
-#define OV6_LINUX 0x02 /* Linux is our OS */
-
-/*
- * The architecture vector has an array of PVR mask/value pairs,
- * followed by # option vectors - 1, followed by the option vectors.
- */
-static unsigned char ibm_architecture_vec[] = {
+unsigned char ibm_architecture_vec[] = {
W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xffff0000), W(0x003f0000), /* POWER7 */