| /* |
| * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver |
| * |
| * Copyright (C) 2014 Intel Corporation |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/axp20x.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/machine.h> |
| #include <linux/iio/driver.h> |
| |
| #define AXP288_ADC_EN_MASK 0xF1 |
| #define AXP288_ADC_TS_PIN_GPADC 0xF2 |
| #define AXP288_ADC_TS_PIN_ON 0xF3 |
| |
| enum axp288_adc_id { |
| AXP288_ADC_TS, |
| AXP288_ADC_PMIC, |
| AXP288_ADC_GP, |
| AXP288_ADC_BATT_CHRG_I, |
| AXP288_ADC_BATT_DISCHRG_I, |
| AXP288_ADC_BATT_V, |
| AXP288_ADC_NR_CHAN, |
| }; |
| |
| struct axp288_adc_info { |
| int irq; |
| struct regmap *regmap; |
| }; |
| |
| static const struct iio_chan_spec const axp288_adc_channels[] = { |
| { |
| .indexed = 1, |
| .type = IIO_TEMP, |
| .channel = 0, |
| .address = AXP288_TS_ADC_H, |
| .datasheet_name = "TS_PIN", |
| }, { |
| .indexed = 1, |
| .type = IIO_TEMP, |
| .channel = 1, |
| .address = AXP288_PMIC_ADC_H, |
| .datasheet_name = "PMIC_TEMP", |
| }, { |
| .indexed = 1, |
| .type = IIO_TEMP, |
| .channel = 2, |
| .address = AXP288_GP_ADC_H, |
| .datasheet_name = "GPADC", |
| }, { |
| .indexed = 1, |
| .type = IIO_CURRENT, |
| .channel = 3, |
| .address = AXP20X_BATT_CHRG_I_H, |
| .datasheet_name = "BATT_CHG_I", |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, { |
| .indexed = 1, |
| .type = IIO_CURRENT, |
| .channel = 4, |
| .address = AXP20X_BATT_DISCHRG_I_H, |
| .datasheet_name = "BATT_DISCHRG_I", |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, { |
| .indexed = 1, |
| .type = IIO_VOLTAGE, |
| .channel = 5, |
| .address = AXP20X_BATT_V_H, |
| .datasheet_name = "BATT_V", |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, |
| }; |
| |
| #define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \ |
| _consumer_channel) \ |
| { \ |
| .adc_channel_label = _adc_channel_label, \ |
| .consumer_dev_name = _consumer_dev_name, \ |
| .consumer_channel = _consumer_channel, \ |
| } |
| |
| /* for consumer drivers */ |
| static struct iio_map axp288_adc_default_maps[] = { |
| AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"), |
| AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"), |
| AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"), |
| AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"), |
| AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"), |
| AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"), |
| {}, |
| }; |
| |
| static int axp288_adc_read_channel(int *val, unsigned long address, |
| struct regmap *regmap) |
| { |
| u8 buf[2]; |
| |
| if (regmap_bulk_read(regmap, address, buf, 2)) |
| return -EIO; |
| *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F); |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode, |
| unsigned long address) |
| { |
| /* channels other than GPADC do not need to switch TS pin */ |
| if (address != AXP288_GP_ADC_H) |
| return 0; |
| |
| return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode); |
| } |
| |
| static int axp288_adc_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| int ret; |
| struct axp288_adc_info *info = iio_priv(indio_dev); |
| |
| mutex_lock(&indio_dev->mlock); |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC, |
| chan->address)) { |
| dev_err(&indio_dev->dev, "GPADC mode\n"); |
| ret = -EINVAL; |
| break; |
| } |
| ret = axp288_adc_read_channel(val, chan->address, info->regmap); |
| if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON, |
| chan->address)) |
| dev_err(&indio_dev->dev, "TS pin restore\n"); |
| break; |
| case IIO_CHAN_INFO_PROCESSED: |
| ret = axp288_adc_read_channel(val, chan->address, info->regmap); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| mutex_unlock(&indio_dev->mlock); |
| |
| return ret; |
| } |
| |
| static int axp288_adc_set_state(struct regmap *regmap) |
| { |
| /* ADC should be always enabled for internal FG to function */ |
| if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON)) |
| return -EIO; |
| |
| return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK); |
| } |
| |
| static const struct iio_info axp288_adc_iio_info = { |
| .read_raw = &axp288_adc_read_raw, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static int axp288_adc_probe(struct platform_device *pdev) |
| { |
| int ret; |
| struct axp288_adc_info *info; |
| struct iio_dev *indio_dev; |
| struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| info = iio_priv(indio_dev); |
| info->irq = platform_get_irq(pdev, 0); |
| if (info->irq < 0) { |
| dev_err(&pdev->dev, "no irq resource?\n"); |
| return info->irq; |
| } |
| platform_set_drvdata(pdev, indio_dev); |
| info->regmap = axp20x->regmap; |
| /* |
| * Set ADC to enabled state at all time, including system suspend. |
| * otherwise internal fuel gauge functionality may be affected. |
| */ |
| ret = axp288_adc_set_state(axp20x->regmap); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to enable ADC device\n"); |
| return ret; |
| } |
| |
| indio_dev->dev.parent = &pdev->dev; |
| indio_dev->name = pdev->name; |
| indio_dev->channels = axp288_adc_channels; |
| indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels); |
| indio_dev->info = &axp288_adc_iio_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| ret = iio_map_array_register(indio_dev, axp288_adc_default_maps); |
| if (ret < 0) |
| return ret; |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "unable to register iio device\n"); |
| goto err_array_unregister; |
| } |
| return 0; |
| |
| err_array_unregister: |
| iio_map_array_unregister(indio_dev); |
| |
| return ret; |
| } |
| |
| static int axp288_adc_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| |
| iio_device_unregister(indio_dev); |
| iio_map_array_unregister(indio_dev); |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id axp288_adc_id_table[] = { |
| { .name = "axp288_adc" }, |
| {}, |
| }; |
| |
| static struct platform_driver axp288_adc_driver = { |
| .probe = axp288_adc_probe, |
| .remove = axp288_adc_remove, |
| .id_table = axp288_adc_id_table, |
| .driver = { |
| .name = "axp288_adc", |
| }, |
| }; |
| |
| MODULE_DEVICE_TABLE(platform, axp288_adc_id_table); |
| |
| module_platform_driver(axp288_adc_driver); |
| |
| MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>"); |
| MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver"); |
| MODULE_LICENSE("GPL"); |