drivers/input/keyboard/pmic8xxx-keypad.c - kernel/msm-4.9 - Gitiles

 /* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/regmap.h>
 #include <linux/of.h>
 #include <linux/input/matrix_keypad.h>

 #define PM8XXX_MAX_ROWS		18
 #define PM8XXX_MAX_COLS		8
 #define PM8XXX_ROW_SHIFT	3
 #define PM8XXX_MATRIX_MAX_SIZE	(PM8XXX_MAX_ROWS * PM8XXX_MAX_COLS)

 #define PM8XXX_MIN_ROWS		5
 #define PM8XXX_MIN_COLS		5

 #define MAX_SCAN_DELAY		128
 #define MIN_SCAN_DELAY		1

 /* in nanoseconds */
 #define MAX_ROW_HOLD_DELAY	122000
 #define MIN_ROW_HOLD_DELAY	30500

 #define MAX_DEBOUNCE_TIME	20
 #define MIN_DEBOUNCE_TIME	5

 #define KEYP_CTRL			0x148

 #define KEYP_CTRL_EVNTS			BIT(0)
 #define KEYP_CTRL_EVNTS_MASK		0x3

 #define KEYP_CTRL_SCAN_COLS_SHIFT	5
 #define KEYP_CTRL_SCAN_COLS_MIN		5
 #define KEYP_CTRL_SCAN_COLS_BITS	0x3

 #define KEYP_CTRL_SCAN_ROWS_SHIFT	2
 #define KEYP_CTRL_SCAN_ROWS_MIN		5
 #define KEYP_CTRL_SCAN_ROWS_BITS	0x7

 #define KEYP_CTRL_KEYP_EN		BIT(7)

 #define KEYP_SCAN			0x149

 #define KEYP_SCAN_READ_STATE		BIT(0)
 #define KEYP_SCAN_DBOUNCE_SHIFT		1
 #define KEYP_SCAN_PAUSE_SHIFT		3
 #define KEYP_SCAN_ROW_HOLD_SHIFT	6

 #define KEYP_TEST			0x14A

 #define KEYP_TEST_CLEAR_RECENT_SCAN	BIT(6)
 #define KEYP_TEST_CLEAR_OLD_SCAN	BIT(5)
 #define KEYP_TEST_READ_RESET		BIT(4)
 #define KEYP_TEST_DTEST_EN		BIT(3)
 #define KEYP_TEST_ABORT_READ		BIT(0)

 #define KEYP_TEST_DBG_SELECT_SHIFT	1

 /* bits of these registers represent
  * '0' for key press
  * '1' for key release
  */
 #define KEYP_RECENT_DATA		0x14B
 #define KEYP_OLD_DATA			0x14C

 #define KEYP_CLOCK_FREQ			32768

 /**
  * struct pmic8xxx_kp - internal keypad data structure
  * @num_cols - number of columns of keypad
  * @num_rows - number of row of keypad
  * @input - input device pointer for keypad
  * @regmap - regmap handle
  * @key_sense_irq - key press/release irq number
  * @key_stuck_irq - key stuck notification irq number
  * @keycodes - array to hold the key codes
  * @dev - parent device pointer
  * @keystate - present key press/release state
  * @stuckstate - present state when key stuck irq
  * @ctrl_reg - control register value
  */
 struct pmic8xxx_kp {
 	unsigned int num_rows;
 	unsigned int num_cols;
 	struct input_dev *input;
 	struct regmap *regmap;
 	int key_sense_irq;
 	int key_stuck_irq;

 	unsigned short keycodes[PM8XXX_MATRIX_MAX_SIZE];

 	struct device *dev;
 	u16 keystate[PM8XXX_MAX_ROWS];
 	u16 stuckstate[PM8XXX_MAX_ROWS];

 	u8 ctrl_reg;
 };

 static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col)
 {
 	/* all keys pressed on that particular row? */
 	if (col == 0x00)
 		return 1 << kp->num_cols;
 	else
 		return col & ((1 << kp->num_cols) - 1);
 }

 /*
  * Synchronous read protocol for RevB0 onwards:
  *
  * 1. Write '1' to ReadState bit in KEYP_SCAN register
  * 2. Wait 2*32KHz clocks, so that HW can successfully enter read mode
  *    synchronously
  * 3. Read rows in old array first if events are more than one
  * 4. Read rows in recent array
  * 5. Wait 4*32KHz clocks
  * 6. Write '0' to ReadState bit of KEYP_SCAN register so that hw can
  *    synchronously exit read mode.
  */
 static int pmic8xxx_chk_sync_read(struct pmic8xxx_kp *kp)
 {
 	int rc;
 	unsigned int scan_val;

 	rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val);
 	if (rc < 0) {
 		dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc);
 		return rc;
 	}

 	scan_val |= 0x1;

 	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
 	if (rc < 0) {
 		dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);
 		return rc;
 	}

 	/* 2 * 32KHz clocks */
 	udelay((2 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1);

 	return rc;
 }

 static int pmic8xxx_kp_read_data(struct pmic8xxx_kp *kp, u16 *state,
 					u16 data_reg, int read_rows)
 {
 	int rc, row;
 	unsigned int val;

 	for (row = 0; row < read_rows; row++) {
 		rc = regmap_read(kp->regmap, data_reg, &val);
 		if (rc)
 			return rc;
 		dev_dbg(kp->dev, "%d = %d\n", row, val);
 		state[row] = pmic8xxx_col_state(kp, val);
 	}

 	return 0;
 }

 static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
 					 u16 *old_state)
 {
 	int rc, read_rows;
 	unsigned int scan_val;

 	if (kp->num_rows < PM8XXX_MIN_ROWS)
 		read_rows = PM8XXX_MIN_ROWS;
 	else
 		read_rows = kp->num_rows;

 	pmic8xxx_chk_sync_read(kp);

 	if (old_state) {
 		rc = pmic8xxx_kp_read_data(kp, old_state, KEYP_OLD_DATA,
 						read_rows);
 		if (rc < 0) {
 			dev_err(kp->dev,
 				"Error reading KEYP_OLD_DATA, rc=%d\n", rc);
 			return rc;
 		}
 	}

 	rc = pmic8xxx_kp_read_data(kp, new_state, KEYP_RECENT_DATA,
 					 read_rows);
 	if (rc < 0) {
 		dev_err(kp->dev,
 			"Error reading KEYP_RECENT_DATA, rc=%d\n", rc);
 		return rc;
 	}

 	/* 4 * 32KHz clocks */
 	udelay((4 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1);

 	rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val);
 	if (rc < 0) {
 		dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc);
 		return rc;
 	}

 	scan_val &= 0xFE;
 	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
 	if (rc < 0)
 		dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);

 	return rc;
 }

 static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
 					 u16 *old_state)
 {
 	int row, col, code;

 	for (row = 0; row < kp->num_rows; row++) {
 		int bits_changed = new_state[row] ^ old_state[row];

 		if (!bits_changed)
 			continue;

 		for (col = 0; col < kp->num_cols; col++) {
 			if (!(bits_changed & (1 << col)))
 				continue;

 			dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
 					!(new_state[row] & (1 << col)) ?
 					"pressed" : "released");

 			code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);

 			input_event(kp->input, EV_MSC, MSC_SCAN, code);
 			input_report_key(kp->input,
 					kp->keycodes[code],
 					!(new_state[row] & (1 << col)));

 			input_sync(kp->input);
 		}
 	}
 }

 static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp *kp, u16 *new_state)
 {
 	int row, found_first = -1;
 	u16 check, row_state;

 	check = 0;
 	for (row = 0; row < kp->num_rows; row++) {
 		row_state = (~new_state[row]) &
 				 ((1 << kp->num_cols) - 1);

 		if (hweight16(row_state) > 1) {
 			if (found_first == -1)
 				found_first = row;
 			if (check & row_state) {
 				dev_dbg(kp->dev, "detected ghost key on row[%d]"
 					 " and row[%d]\n", found_first, row);
 				return true;
 			}
 		}
 		check |= row_state;
 	}
 	return false;
 }

 static int pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, unsigned int events)
 {
 	u16 new_state[PM8XXX_MAX_ROWS];
 	u16 old_state[PM8XXX_MAX_ROWS];
 	int rc;

 	switch (events) {
 	case 0x1:
 		rc = pmic8xxx_kp_read_matrix(kp, new_state, NULL);
 		if (rc < 0)
 			return rc;

 		/* detecting ghost key is not an error */
 		if (pmic8xxx_detect_ghost_keys(kp, new_state))
 			return 0;
 		__pmic8xxx_kp_scan_matrix(kp, new_state, kp->keystate);
 		memcpy(kp->keystate, new_state, sizeof(new_state));
 	break;
 	case 0x3: /* two events - eventcounter is gray-coded */
 		rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
 		if (rc < 0)
 			return rc;

 		__pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate);
 		__pmic8xxx_kp_scan_matrix(kp, new_state, old_state);
 		memcpy(kp->keystate, new_state, sizeof(new_state));
 	break;
 	case 0x2:
 		dev_dbg(kp->dev, "Some key events were lost\n");
 		rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
 		if (rc < 0)
 			return rc;
 		__pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate);
 		__pmic8xxx_kp_scan_matrix(kp, new_state, old_state);
 		memcpy(kp->keystate, new_state, sizeof(new_state));
 	break;
 	default:
 		rc = -EINVAL;
 	}
 	return rc;
 }

 /*
  * NOTE: We are reading recent and old data registers blindly
  * whenever key-stuck interrupt happens, because events counter doesn't
  * get updated when this interrupt happens due to key stuck doesn't get
  * considered as key state change.
  *
  * We are not using old data register contents after they are being read
  * because it might report the key which was pressed before the key being stuck
  * as stuck key because it's pressed status is stored in the old data
  * register.
  */
 static irqreturn_t pmic8xxx_kp_stuck_irq(int irq, void *data)
 {
 	u16 new_state[PM8XXX_MAX_ROWS];
 	u16 old_state[PM8XXX_MAX_ROWS];
 	int rc;
 	struct pmic8xxx_kp *kp = data;

 	rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
 	if (rc < 0) {
 		dev_err(kp->dev, "failed to read keypad matrix\n");
 		return IRQ_HANDLED;
 	}

 	__pmic8xxx_kp_scan_matrix(kp, new_state, kp->stuckstate);

 	return IRQ_HANDLED;
 }

 static irqreturn_t pmic8xxx_kp_irq(int irq, void *data)
 {
 	struct pmic8xxx_kp *kp = data;
 	unsigned int ctrl_val, events;
 	int rc;

 	rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val);
 	if (rc < 0) {
 		dev_err(kp->dev, "failed to read keyp_ctrl register\n");
 		return IRQ_HANDLED;
 	}

 	events = ctrl_val & KEYP_CTRL_EVNTS_MASK;

 	rc = pmic8xxx_kp_scan_matrix(kp, events);
 	if (rc < 0)
 		dev_err(kp->dev, "failed to scan matrix\n");

 	return IRQ_HANDLED;
 }

 static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp,
 			     struct platform_device *pdev)
 {
 	const struct device_node *of_node = pdev->dev.of_node;
 	unsigned int scan_delay_ms;
 	unsigned int row_hold_ns;
 	unsigned int debounce_ms;
 	int bits, rc, cycles;
 	u8 scan_val = 0, ctrl_val = 0;
 	static const u8 row_bits[] = {
 		0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7,
 	};

 	/* Find column bits */
 	if (kp->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
 		bits = 0;
 	else
 		bits = kp->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
 	ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
 		KEYP_CTRL_SCAN_COLS_SHIFT;

 	/* Find row bits */
 	if (kp->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
 		bits = 0;
 	else
 		bits = row_bits[kp->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];

 	ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);

 	rc = regmap_write(kp->regmap, KEYP_CTRL, ctrl_val);
 	if (rc < 0) {
 		dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc);
 		return rc;
 	}

 	if (of_property_read_u32(of_node, "scan-delay", &scan_delay_ms))
 		scan_delay_ms = MIN_SCAN_DELAY;

 	if (scan_delay_ms > MAX_SCAN_DELAY || scan_delay_ms < MIN_SCAN_DELAY ||
 	    !is_power_of_2(scan_delay_ms)) {
 		dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
 		return -EINVAL;
 	}

 	if (of_property_read_u32(of_node, "row-hold", &row_hold_ns))
 		row_hold_ns = MIN_ROW_HOLD_DELAY;

 	if (row_hold_ns > MAX_ROW_HOLD_DELAY ||
 	    row_hold_ns < MIN_ROW_HOLD_DELAY ||
 	    ((row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
 		dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
 		return -EINVAL;
 	}

 	if (of_property_read_u32(of_node, "debounce", &debounce_ms))
 		debounce_ms = MIN_DEBOUNCE_TIME;

 	if (((debounce_ms % 5) != 0) ||
 	    debounce_ms > MAX_DEBOUNCE_TIME ||
 	    debounce_ms < MIN_DEBOUNCE_TIME) {
 		dev_err(&pdev->dev, "invalid debounce time supplied\n");
 		return -EINVAL;
 	}

 	bits = (debounce_ms / 5) - 1;

 	scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT);

 	bits = fls(scan_delay_ms) - 1;
 	scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT);

 	/* Row hold time is a multiple of 32KHz cycles. */
 	cycles = (row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;

 	scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT);

 	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
 	if (rc)
 		dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);

 	return rc;

 }

 static int pmic8xxx_kp_enable(struct pmic8xxx_kp *kp)
 {
 	int rc;

 	kp->ctrl_reg |= KEYP_CTRL_KEYP_EN;

 	rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg);
 	if (rc < 0)
 		dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc);

 	return rc;
 }

 static int pmic8xxx_kp_disable(struct pmic8xxx_kp *kp)
 {
 	int rc;

 	kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN;

 	rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg);
 	if (rc < 0)
 		return rc;

 	return rc;
 }

 static int pmic8xxx_kp_open(struct input_dev *dev)
 {
 	struct pmic8xxx_kp *kp = input_get_drvdata(dev);

 	return pmic8xxx_kp_enable(kp);
 }

 static void pmic8xxx_kp_close(struct input_dev *dev)
 {
 	struct pmic8xxx_kp *kp = input_get_drvdata(dev);

 	pmic8xxx_kp_disable(kp);
 }

 /*
  * keypad controller should be initialized in the following sequence
  * only, otherwise it might get into FSM stuck state.
  *
  * - Initialize keypad control parameters, like no. of rows, columns,
  *   timing values etc.,
  * - configure rows and column gpios pull up/down.
  * - set irq edge type.
  * - enable the keypad controller.
  */
 static int pmic8xxx_kp_probe(struct platform_device *pdev)
 {
 	unsigned int rows, cols;
 	bool repeat;
 	bool wakeup;
 	struct pmic8xxx_kp *kp;
 	int rc;
 	unsigned int ctrl_val;

 	rc = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
 	if (rc)
 		return rc;

 	if (cols > PM8XXX_MAX_COLS || rows > PM8XXX_MAX_ROWS ||
 	    cols < PM8XXX_MIN_COLS) {
 		dev_err(&pdev->dev, "invalid platform data\n");
 		return -EINVAL;
 	}

 	repeat = !of_property_read_bool(pdev->dev.of_node,
 					"linux,input-no-autorepeat");
 	wakeup = of_property_read_bool(pdev->dev.of_node,
 					"linux,keypad-wakeup");

 	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
 	if (!kp)
 		return -ENOMEM;

 	kp->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!kp->regmap)
 		return -ENODEV;

 	platform_set_drvdata(pdev, kp);

 	kp->num_rows	= rows;
 	kp->num_cols	= cols;
 	kp->dev		= &pdev->dev;

 	kp->input = devm_input_allocate_device(&pdev->dev);
 	if (!kp->input) {
 		dev_err(&pdev->dev, "unable to allocate input device\n");
 		return -ENOMEM;
 	}

 	kp->key_sense_irq = platform_get_irq(pdev, 0);
 	if (kp->key_sense_irq < 0) {
 		dev_err(&pdev->dev, "unable to get keypad sense irq\n");
 		return kp->key_sense_irq;
 	}

 	kp->key_stuck_irq = platform_get_irq(pdev, 1);
 	if (kp->key_stuck_irq < 0) {
 		dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
 		return kp->key_stuck_irq;
 	}

 	kp->input->name = "PMIC8XXX keypad";
 	kp->input->phys = "pmic8xxx_keypad/input0";

 	kp->input->id.bustype	= BUS_I2C;
 	kp->input->id.version	= 0x0001;
 	kp->input->id.product	= 0x0001;
 	kp->input->id.vendor	= 0x0001;

 	kp->input->open		= pmic8xxx_kp_open;
 	kp->input->close	= pmic8xxx_kp_close;

 	rc = matrix_keypad_build_keymap(NULL, NULL,
 					PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS,
 					kp->keycodes, kp->input);
 	if (rc) {
 		dev_err(&pdev->dev, "failed to build keymap\n");
 		return rc;
 	}

 	if (repeat)
 		__set_bit(EV_REP, kp->input->evbit);
 	input_set_capability(kp->input, EV_MSC, MSC_SCAN);

 	input_set_drvdata(kp->input, kp);

 	/* initialize keypad state */
 	memset(kp->keystate, 0xff, sizeof(kp->keystate));
 	memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));

 	rc = pmic8xxx_kpd_init(kp, pdev);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "unable to initialize keypad controller\n");
 		return rc;
 	}

 	rc = devm_request_any_context_irq(&pdev->dev, kp->key_sense_irq,
 			pmic8xxx_kp_irq, IRQF_TRIGGER_RISING, "pmic-keypad",
 			kp);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "failed to request keypad sense irq\n");
 		return rc;
 	}

 	rc = devm_request_any_context_irq(&pdev->dev, kp->key_stuck_irq,
 			pmic8xxx_kp_stuck_irq, IRQF_TRIGGER_RISING,
 			"pmic-keypad-stuck", kp);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
 		return rc;
 	}

 	rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
 		return rc;
 	}

 	kp->ctrl_reg = ctrl_val;

 	rc = input_register_device(kp->input);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "unable to register keypad input device\n");
 		return rc;
 	}

 	device_init_wakeup(&pdev->dev, wakeup);

 	return 0;
 }

 #ifdef CONFIG_PM_SLEEP
 static int pmic8xxx_kp_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = kp->input;

 	if (device_may_wakeup(dev)) {
 		enable_irq_wake(kp->key_sense_irq);
 	} else {
 		mutex_lock(&input_dev->mutex);

 		if (input_dev->users)
 			pmic8xxx_kp_disable(kp);

 		mutex_unlock(&input_dev->mutex);
 	}

 	return 0;
 }

 static int pmic8xxx_kp_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = kp->input;

 	if (device_may_wakeup(dev)) {
 		disable_irq_wake(kp->key_sense_irq);
 	} else {
 		mutex_lock(&input_dev->mutex);

 		if (input_dev->users)
 			pmic8xxx_kp_enable(kp);

 		mutex_unlock(&input_dev->mutex);
 	}

 	return 0;
 }
 #endif

 static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops,
 			 pmic8xxx_kp_suspend, pmic8xxx_kp_resume);

 static const struct of_device_id pm8xxx_match_table[] = {
 	{ .compatible = "qcom,pm8058-keypad" },
 	{ .compatible = "qcom,pm8921-keypad" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_match_table);

 static struct platform_driver pmic8xxx_kp_driver = {
 	.probe		= pmic8xxx_kp_probe,
 	.driver		= {
 		.name = "pm8xxx-keypad",
 		.owner = THIS_MODULE,
 		.pm = &pm8xxx_kp_pm_ops,
 		.of_match_table = pm8xxx_match_table,
 	},
 };
 module_platform_driver(pmic8xxx_kp_driver);

 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("PMIC8XXX keypad driver");
 MODULE_VERSION("1.0");
 MODULE_ALIAS("platform:pmic8xxx_keypad");
 MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>");
	/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/kernel.h>
	#include <linux/interrupt.h>
	#include <linux/slab.h>
	#include <linux/input.h>
	#include <linux/bitops.h>
	#include <linux/delay.h>
	#include <linux/mutex.h>
	#include <linux/regmap.h>
	#include <linux/of.h>
	#include <linux/input/matrix_keypad.h>

	#define PM8XXX_MAX_ROWS 18
	#define PM8XXX_MAX_COLS 8
	#define PM8XXX_ROW_SHIFT 3
	#define PM8XXX_MATRIX_MAX_SIZE (PM8XXX_MAX_ROWS * PM8XXX_MAX_COLS)

	#define PM8XXX_MIN_ROWS 5
	#define PM8XXX_MIN_COLS 5

	#define MAX_SCAN_DELAY 128
	#define MIN_SCAN_DELAY 1

	/* in nanoseconds */
	#define MAX_ROW_HOLD_DELAY 122000
	#define MIN_ROW_HOLD_DELAY 30500

	#define MAX_DEBOUNCE_TIME 20
	#define MIN_DEBOUNCE_TIME 5

	#define KEYP_CTRL 0x148

	#define KEYP_CTRL_EVNTS BIT(0)
	#define KEYP_CTRL_EVNTS_MASK 0x3

	#define KEYP_CTRL_SCAN_COLS_SHIFT 5
	#define KEYP_CTRL_SCAN_COLS_MIN 5
	#define KEYP_CTRL_SCAN_COLS_BITS 0x3

	#define KEYP_CTRL_SCAN_ROWS_SHIFT 2
	#define KEYP_CTRL_SCAN_ROWS_MIN 5
	#define KEYP_CTRL_SCAN_ROWS_BITS 0x7

	#define KEYP_CTRL_KEYP_EN BIT(7)

	#define KEYP_SCAN 0x149

	#define KEYP_SCAN_READ_STATE BIT(0)
	#define KEYP_SCAN_DBOUNCE_SHIFT 1
	#define KEYP_SCAN_PAUSE_SHIFT 3
	#define KEYP_SCAN_ROW_HOLD_SHIFT 6

	#define KEYP_TEST 0x14A

	#define KEYP_TEST_CLEAR_RECENT_SCAN BIT(6)
	#define KEYP_TEST_CLEAR_OLD_SCAN BIT(5)
	#define KEYP_TEST_READ_RESET BIT(4)
	#define KEYP_TEST_DTEST_EN BIT(3)
	#define KEYP_TEST_ABORT_READ BIT(0)

	#define KEYP_TEST_DBG_SELECT_SHIFT 1

	/* bits of these registers represent
	* '0' for key press
	* '1' for key release
	*/
	#define KEYP_RECENT_DATA 0x14B
	#define KEYP_OLD_DATA 0x14C

	#define KEYP_CLOCK_FREQ 32768

	/**
	* struct pmic8xxx_kp - internal keypad data structure
	* @num_cols - number of columns of keypad
	* @num_rows - number of row of keypad
	* @input - input device pointer for keypad
	* @regmap - regmap handle
	* @key_sense_irq - key press/release irq number
	* @key_stuck_irq - key stuck notification irq number
	* @keycodes - array to hold the key codes
	* @dev - parent device pointer
	* @keystate - present key press/release state
	* @stuckstate - present state when key stuck irq
	* @ctrl_reg - control register value
	*/
	struct pmic8xxx_kp {
	unsigned int num_rows;
	unsigned int num_cols;
	struct input_dev *input;
	struct regmap *regmap;
	int key_sense_irq;
	int key_stuck_irq;

	unsigned short keycodes[PM8XXX_MATRIX_MAX_SIZE];

	struct device *dev;
	u16 keystate[PM8XXX_MAX_ROWS];
	u16 stuckstate[PM8XXX_MAX_ROWS];

	u8 ctrl_reg;
	};

	static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col)
	{
	/* all keys pressed on that particular row? */
	if (col == 0x00)
	return 1 << kp->num_cols;
	else
	return col & ((1 << kp->num_cols) - 1);
	}

	/*
	* Synchronous read protocol for RevB0 onwards:
	*
	* 1. Write '1' to ReadState bit in KEYP_SCAN register
	* 2. Wait 2*32KHz clocks, so that HW can successfully enter read mode
	* synchronously
	* 3. Read rows in old array first if events are more than one
	* 4. Read rows in recent array
	* 5. Wait 4*32KHz clocks
	* 6. Write '0' to ReadState bit of KEYP_SCAN register so that hw can
	* synchronously exit read mode.
	*/
	static int pmic8xxx_chk_sync_read(struct pmic8xxx_kp *kp)
	{
	int rc;
	unsigned int scan_val;

	rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val);
	if (rc < 0) {
	dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc);
	return rc;
	}

	scan_val \|= 0x1;

	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
	if (rc < 0) {
	dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);
	return rc;
	}

	/* 2 * 32KHz clocks */
	udelay((2 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1);

	return rc;
	}

	static int pmic8xxx_kp_read_data(struct pmic8xxx_kp kp, u16 state,
	u16 data_reg, int read_rows)
	{
	int rc, row;
	unsigned int val;

	for (row = 0; row < read_rows; row++) {
	rc = regmap_read(kp->regmap, data_reg, &val);
	if (rc)
	return rc;
	dev_dbg(kp->dev, "%d = %d\n", row, val);
	state[row] = pmic8xxx_col_state(kp, val);
	}

	return 0;
	}

	static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp kp, u16 new_state,
	u16 *old_state)
	{
	int rc, read_rows;
	unsigned int scan_val;

	if (kp->num_rows < PM8XXX_MIN_ROWS)
	read_rows = PM8XXX_MIN_ROWS;
	else
	read_rows = kp->num_rows;

	pmic8xxx_chk_sync_read(kp);

	if (old_state) {
	rc = pmic8xxx_kp_read_data(kp, old_state, KEYP_OLD_DATA,
	read_rows);
	if (rc < 0) {
	dev_err(kp->dev,
	"Error reading KEYP_OLD_DATA, rc=%d\n", rc);
	return rc;
	}
	}

	rc = pmic8xxx_kp_read_data(kp, new_state, KEYP_RECENT_DATA,
	read_rows);
	if (rc < 0) {
	dev_err(kp->dev,
	"Error reading KEYP_RECENT_DATA, rc=%d\n", rc);
	return rc;
	}

	/* 4 * 32KHz clocks */
	udelay((4 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1);

	rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val);
	if (rc < 0) {
	dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc);
	return rc;
	}

	scan_val &= 0xFE;
	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
	if (rc < 0)
	dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);

	return rc;
	}

	static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp kp, u16 new_state,
	u16 *old_state)
	{
	int row, col, code;

	for (row = 0; row < kp->num_rows; row++) {
	int bits_changed = new_state[row] ^ old_state[row];

	if (!bits_changed)
	continue;

	for (col = 0; col < kp->num_cols; col++) {
	if (!(bits_changed & (1 << col)))
	continue;

	dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
	!(new_state[row] & (1 << col)) ?
	"pressed" : "released");

	code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);

	input_event(kp->input, EV_MSC, MSC_SCAN, code);
	input_report_key(kp->input,
	kp->keycodes[code],
	!(new_state[row] & (1 << col)));

	input_sync(kp->input);
	}
	}
	}

	static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp kp, u16 new_state)
	{
	int row, found_first = -1;
	u16 check, row_state;

	check = 0;
	for (row = 0; row < kp->num_rows; row++) {
	row_state = (~new_state[row]) &
	((1 << kp->num_cols) - 1);

	if (hweight16(row_state) > 1) {
	if (found_first == -1)
	found_first = row;
	if (check & row_state) {
	dev_dbg(kp->dev, "detected ghost key on row[%d]"
	" and row[%d]\n", found_first, row);
	return true;
	}
	}
	check \|= row_state;
	}
	return false;
	}

	static int pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, unsigned int events)
	{
	u16 new_state[PM8XXX_MAX_ROWS];
	u16 old_state[PM8XXX_MAX_ROWS];
	int rc;

	switch (events) {
	case 0x1:
	rc = pmic8xxx_kp_read_matrix(kp, new_state, NULL);
	if (rc < 0)
	return rc;

	/* detecting ghost key is not an error */
	if (pmic8xxx_detect_ghost_keys(kp, new_state))
	return 0;
	__pmic8xxx_kp_scan_matrix(kp, new_state, kp->keystate);
	memcpy(kp->keystate, new_state, sizeof(new_state));
	break;
	case 0x3: /* two events - eventcounter is gray-coded */
	rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
	if (rc < 0)
	return rc;

	__pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate);
	__pmic8xxx_kp_scan_matrix(kp, new_state, old_state);
	memcpy(kp->keystate, new_state, sizeof(new_state));
	break;
	case 0x2:
	dev_dbg(kp->dev, "Some key events were lost\n");
	rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
	if (rc < 0)
	return rc;
	__pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate);
	__pmic8xxx_kp_scan_matrix(kp, new_state, old_state);
	memcpy(kp->keystate, new_state, sizeof(new_state));
	break;
	default:
	rc = -EINVAL;
	}
	return rc;
	}

	/*
	* NOTE: We are reading recent and old data registers blindly
	* whenever key-stuck interrupt happens, because events counter doesn't
	* get updated when this interrupt happens due to key stuck doesn't get
	* considered as key state change.
	*
	* We are not using old data register contents after they are being read
	* because it might report the key which was pressed before the key being stuck
	* as stuck key because it's pressed status is stored in the old data
	* register.
	*/
	static irqreturn_t pmic8xxx_kp_stuck_irq(int irq, void *data)
	{
	u16 new_state[PM8XXX_MAX_ROWS];
	u16 old_state[PM8XXX_MAX_ROWS];
	int rc;
	struct pmic8xxx_kp *kp = data;

	rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
	if (rc < 0) {
	dev_err(kp->dev, "failed to read keypad matrix\n");
	return IRQ_HANDLED;
	}

	__pmic8xxx_kp_scan_matrix(kp, new_state, kp->stuckstate);

	return IRQ_HANDLED;
	}

	static irqreturn_t pmic8xxx_kp_irq(int irq, void *data)
	{
	struct pmic8xxx_kp *kp = data;
	unsigned int ctrl_val, events;
	int rc;

	rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val);
	if (rc < 0) {
	dev_err(kp->dev, "failed to read keyp_ctrl register\n");
	return IRQ_HANDLED;
	}

	events = ctrl_val & KEYP_CTRL_EVNTS_MASK;

	rc = pmic8xxx_kp_scan_matrix(kp, events);
	if (rc < 0)
	dev_err(kp->dev, "failed to scan matrix\n");

	return IRQ_HANDLED;
	}

	static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp,
	struct platform_device *pdev)
	{
	const struct device_node *of_node = pdev->dev.of_node;
	unsigned int scan_delay_ms;
	unsigned int row_hold_ns;
	unsigned int debounce_ms;
	int bits, rc, cycles;
	u8 scan_val = 0, ctrl_val = 0;
	static const u8 row_bits[] = {
	0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7,
	};

	/* Find column bits */
	if (kp->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
	bits = 0;
	else
	bits = kp->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
	ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
	KEYP_CTRL_SCAN_COLS_SHIFT;

	/* Find row bits */
	if (kp->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
	bits = 0;
	else
	bits = row_bits[kp->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];

	ctrl_val \|= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);

	rc = regmap_write(kp->regmap, KEYP_CTRL, ctrl_val);
	if (rc < 0) {
	dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc);
	return rc;
	}

	if (of_property_read_u32(of_node, "scan-delay", &scan_delay_ms))
	scan_delay_ms = MIN_SCAN_DELAY;

	if (scan_delay_ms > MAX_SCAN_DELAY \|\| scan_delay_ms < MIN_SCAN_DELAY \|\|
	!is_power_of_2(scan_delay_ms)) {
	dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
	return -EINVAL;
	}

	if (of_property_read_u32(of_node, "row-hold", &row_hold_ns))
	row_hold_ns = MIN_ROW_HOLD_DELAY;

	if (row_hold_ns > MAX_ROW_HOLD_DELAY \|\|
	row_hold_ns < MIN_ROW_HOLD_DELAY \|\|
	((row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
	dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
	return -EINVAL;
	}

	if (of_property_read_u32(of_node, "debounce", &debounce_ms))
	debounce_ms = MIN_DEBOUNCE_TIME;

	if (((debounce_ms % 5) != 0) \|\|
	debounce_ms > MAX_DEBOUNCE_TIME \|\|
	debounce_ms < MIN_DEBOUNCE_TIME) {
	dev_err(&pdev->dev, "invalid debounce time supplied\n");
	return -EINVAL;
	}

	bits = (debounce_ms / 5) - 1;

	scan_val \|= (bits << KEYP_SCAN_DBOUNCE_SHIFT);

	bits = fls(scan_delay_ms) - 1;
	scan_val \|= (bits << KEYP_SCAN_PAUSE_SHIFT);

	/* Row hold time is a multiple of 32KHz cycles. */
	cycles = (row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;

	scan_val \|= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT);

	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
	if (rc)
	dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);

	return rc;

	}

	static int pmic8xxx_kp_enable(struct pmic8xxx_kp *kp)
	{
	int rc;

	kp->ctrl_reg \|= KEYP_CTRL_KEYP_EN;

	rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg);
	if (rc < 0)
	dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc);

	return rc;
	}

	static int pmic8xxx_kp_disable(struct pmic8xxx_kp *kp)
	{
	int rc;

	kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN;

	rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg);
	if (rc < 0)
	return rc;

	return rc;
	}

	static int pmic8xxx_kp_open(struct input_dev *dev)
	{
	struct pmic8xxx_kp *kp = input_get_drvdata(dev);

	return pmic8xxx_kp_enable(kp);
	}

	static void pmic8xxx_kp_close(struct input_dev *dev)
	{
	struct pmic8xxx_kp *kp = input_get_drvdata(dev);

	pmic8xxx_kp_disable(kp);
	}

	/*
	* keypad controller should be initialized in the following sequence
	* only, otherwise it might get into FSM stuck state.
	*
	* - Initialize keypad control parameters, like no. of rows, columns,
	* timing values etc.,
	* - configure rows and column gpios pull up/down.
	* - set irq edge type.
	* - enable the keypad controller.
	*/
	static int pmic8xxx_kp_probe(struct platform_device *pdev)
	{
	unsigned int rows, cols;
	bool repeat;
	bool wakeup;
	struct pmic8xxx_kp *kp;
	int rc;
	unsigned int ctrl_val;

	rc = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
	if (rc)
	return rc;

	if (cols > PM8XXX_MAX_COLS \|\| rows > PM8XXX_MAX_ROWS \|\|
	cols < PM8XXX_MIN_COLS) {
	dev_err(&pdev->dev, "invalid platform data\n");
	return -EINVAL;
	}

	repeat = !of_property_read_bool(pdev->dev.of_node,
	"linux,input-no-autorepeat");
	wakeup = of_property_read_bool(pdev->dev.of_node,
	"linux,keypad-wakeup");

	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
	if (!kp)
	return -ENOMEM;

	kp->regmap = dev_get_regmap(pdev->dev.parent, NULL);
	if (!kp->regmap)
	return -ENODEV;

	platform_set_drvdata(pdev, kp);

	kp->num_rows = rows;
	kp->num_cols = cols;
	kp->dev = &pdev->dev;

	kp->input = devm_input_allocate_device(&pdev->dev);
	if (!kp->input) {
	dev_err(&pdev->dev, "unable to allocate input device\n");
	return -ENOMEM;
	}

	kp->key_sense_irq = platform_get_irq(pdev, 0);
	if (kp->key_sense_irq < 0) {
	dev_err(&pdev->dev, "unable to get keypad sense irq\n");
	return kp->key_sense_irq;
	}

	kp->key_stuck_irq = platform_get_irq(pdev, 1);
	if (kp->key_stuck_irq < 0) {
	dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
	return kp->key_stuck_irq;
	}

	kp->input->name = "PMIC8XXX keypad";
	kp->input->phys = "pmic8xxx_keypad/input0";

	kp->input->id.bustype = BUS_I2C;
	kp->input->id.version = 0x0001;
	kp->input->id.product = 0x0001;
	kp->input->id.vendor = 0x0001;

	kp->input->open = pmic8xxx_kp_open;
	kp->input->close = pmic8xxx_kp_close;

	rc = matrix_keypad_build_keymap(NULL, NULL,
	PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS,
	kp->keycodes, kp->input);
	if (rc) {
	dev_err(&pdev->dev, "failed to build keymap\n");
	return rc;
	}

	if (repeat)
	__set_bit(EV_REP, kp->input->evbit);
	input_set_capability(kp->input, EV_MSC, MSC_SCAN);

	input_set_drvdata(kp->input, kp);

	/* initialize keypad state */
	memset(kp->keystate, 0xff, sizeof(kp->keystate));
	memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));

	rc = pmic8xxx_kpd_init(kp, pdev);
	if (rc < 0) {
	dev_err(&pdev->dev, "unable to initialize keypad controller\n");
	return rc;
	}

	rc = devm_request_any_context_irq(&pdev->dev, kp->key_sense_irq,
	pmic8xxx_kp_irq, IRQF_TRIGGER_RISING, "pmic-keypad",
	kp);
	if (rc < 0) {
	dev_err(&pdev->dev, "failed to request keypad sense irq\n");
	return rc;
	}

	rc = devm_request_any_context_irq(&pdev->dev, kp->key_stuck_irq,
	pmic8xxx_kp_stuck_irq, IRQF_TRIGGER_RISING,
	"pmic-keypad-stuck", kp);
	if (rc < 0) {
	dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
	return rc;
	}

	rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val);
	if (rc < 0) {
	dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
	return rc;
	}

	kp->ctrl_reg = ctrl_val;

	rc = input_register_device(kp->input);
	if (rc < 0) {
	dev_err(&pdev->dev, "unable to register keypad input device\n");
	return rc;
	}

	device_init_wakeup(&pdev->dev, wakeup);

	return 0;
	}

	#ifdef CONFIG_PM_SLEEP
	static int pmic8xxx_kp_suspend(struct device *dev)
	{
	struct platform_device *pdev = to_platform_device(dev);
	struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
	struct input_dev *input_dev = kp->input;

	if (device_may_wakeup(dev)) {
	enable_irq_wake(kp->key_sense_irq);
	} else {
	mutex_lock(&input_dev->mutex);

	if (input_dev->users)
	pmic8xxx_kp_disable(kp);

	mutex_unlock(&input_dev->mutex);
	}

	return 0;
	}

	static int pmic8xxx_kp_resume(struct device *dev)
	{
	struct platform_device *pdev = to_platform_device(dev);
	struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
	struct input_dev *input_dev = kp->input;

	if (device_may_wakeup(dev)) {
	disable_irq_wake(kp->key_sense_irq);
	} else {
	mutex_lock(&input_dev->mutex);

	if (input_dev->users)
	pmic8xxx_kp_enable(kp);

	mutex_unlock(&input_dev->mutex);
	}

	return 0;
	}
	#endif

	static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops,
	pmic8xxx_kp_suspend, pmic8xxx_kp_resume);

	static const struct of_device_id pm8xxx_match_table[] = {
	{ .compatible = "qcom,pm8058-keypad" },
	{ .compatible = "qcom,pm8921-keypad" },
	{ }
	};
	MODULE_DEVICE_TABLE(of, pm8xxx_match_table);

	static struct platform_driver pmic8xxx_kp_driver = {
	.probe = pmic8xxx_kp_probe,
	.driver = {
	.name = "pm8xxx-keypad",
	.owner = THIS_MODULE,
	.pm = &pm8xxx_kp_pm_ops,
	.of_match_table = pm8xxx_match_table,
	},
	};
	module_platform_driver(pmic8xxx_kp_driver);

	MODULE_LICENSE("GPL v2");
	MODULE_DESCRIPTION("PMIC8XXX keypad driver");
	MODULE_VERSION("1.0");
	MODULE_ALIAS("platform:pmic8xxx_keypad");
	MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>");