diff --git a/Documentation/linux_tv/media/dvb/FE_DISHNETWORK_SEND_LEGACY_CMD.rst b/Documentation/linux_tv/media/dvb/FE_DISHNETWORK_SEND_LEGACY_CMD.rst
new file mode 100644
index 0000000..f4effaa
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/FE_DISHNETWORK_SEND_LEGACY_CMD.rst
@@ -0,0 +1,55 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_DISHNETWORK_SEND_LEGACY_CMD:
+
+******************************
+FE_DISHNETWORK_SEND_LEGACY_CMD
+******************************
+
+DESCRIPTION
+
+WARNING: This is a very obscure legacy command, used only at stv0299
+driver. Should not be used on newer drivers.
+
+It provides a non-standard method for selecting Diseqc voltage on the
+frontend, for Dish Network legacy switches.
+
+As support for this ioctl were added in 2004, this means that such
+dishes were already legacy in 2004.
+
+SYNOPSIS
+
+int ioctl(int fd, int request =
+:ref:`FE_DISHNETWORK_SEND_LEGACY_CMD <FE_DISHNETWORK_SEND_LEGACY_CMD>`,
+unsigned long cmd);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  unsigned long cmd
+
+       -  sends the specified raw cmd to the dish via DISEqC.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/FE_GET_EVENT.rst b/Documentation/linux_tv/media/dvb/FE_GET_EVENT.rst
new file mode 100644
index 0000000..75eab89
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/FE_GET_EVENT.rst
@@ -0,0 +1,89 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_GET_EVENT:
+
+************
+FE_GET_EVENT
+************
+
+DESCRIPTION
+
+This ioctl call returns a frontend event if available. If an event is
+not available, the behavior depends on whether the device is in blocking
+or non-blocking mode. In the latter case, the call fails immediately
+with errno set to EWOULDBLOCK. In the former case, the call blocks until
+an event becomes available.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = QPSK_GET_EVENT, struct
+dvb_frontend_event *ev);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals :ref:`FE_GET_EVENT <FE_GET_EVENT>` for this command.
+
+    -  .. row 3
+
+       -  struct dvb_frontend_event *ev
+
+       -  Points to the location where the event,
+
+    -  .. row 4
+
+       -  
+       -  if any, is to be stored.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EWOULDBLOCK
+
+       -  There is no event pending, and the device is in non-blocking mode.
+
+    -  .. row 2
+
+       -  EOVERFLOW
+
+       -  Overflow in event queue - one or more events were lost.
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/FE_GET_FRONTEND.rst b/Documentation/linux_tv/media/dvb/FE_GET_FRONTEND.rst
new file mode 100644
index 0000000..30c85cf
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/FE_GET_FRONTEND.rst
@@ -0,0 +1,77 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_GET_FRONTEND:
+
+***************
+FE_GET_FRONTEND
+***************
+
+DESCRIPTION
+
+This ioctl call queries the currently effective frontend parameters. For
+this command, read-only access to the device is sufficient.
+
+SYNOPSIS
+
+int ioctl(int fd, int request =
+:ref:`FE_GET_FRONTEND <FE_GET_FRONTEND>`, struct
+dvb_frontend_parameters *p);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals :ref:`FE_SET_FRONTEND <FE_SET_FRONTEND>` for this
+          command.
+
+    -  .. row 3
+
+       -  struct dvb_frontend_parameters *p
+
+       -  Points to parameters for tuning operation.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  Maximum supported symbol rate reached.
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/FE_READ_BER.rst b/Documentation/linux_tv/media/dvb/FE_READ_BER.rst
new file mode 100644
index 0000000..e214518
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/FE_READ_BER.rst
@@ -0,0 +1,61 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_READ_BER:
+
+***********
+FE_READ_BER
+***********
+
+DESCRIPTION
+
+This ioctl call returns the bit error rate for the signal currently
+received/demodulated by the front-end. For this command, read-only
+access to the device is sufficient.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = :ref:`FE_READ_BER <FE_READ_BER>`,
+uint32_t *ber);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals :ref:`FE_READ_BER <FE_READ_BER>` for this command.
+
+    -  .. row 3
+
+       -  uint32_t *ber
+
+       -  The bit error rate is stored into *ber.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/FE_READ_SIGNAL_STRENGTH.rst b/Documentation/linux_tv/media/dvb/FE_READ_SIGNAL_STRENGTH.rst
new file mode 100644
index 0000000..3e34bea
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/FE_READ_SIGNAL_STRENGTH.rst
@@ -0,0 +1,64 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_READ_SIGNAL_STRENGTH:
+
+***********************
+FE_READ_SIGNAL_STRENGTH
+***********************
+
+DESCRIPTION
+
+This ioctl call returns the signal strength value for the signal
+currently received by the front-end. For this command, read-only access
+to the device is sufficient.
+
+SYNOPSIS
+
+int ioctl( int fd, int request =
+:ref:`FE_READ_SIGNAL_STRENGTH <FE_READ_SIGNAL_STRENGTH>`,
+uint16_t *strength);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals
+          :ref:`FE_READ_SIGNAL_STRENGTH <FE_READ_SIGNAL_STRENGTH>`
+          for this command.
+
+    -  .. row 3
+
+       -  uint16_t *strength
+
+       -  The signal strength value is stored into *strength.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/FE_READ_SNR.rst b/Documentation/linux_tv/media/dvb/FE_READ_SNR.rst
new file mode 100644
index 0000000..b8a6397
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/FE_READ_SNR.rst
@@ -0,0 +1,61 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_READ_SNR:
+
+***********
+FE_READ_SNR
+***********
+
+DESCRIPTION
+
+This ioctl call returns the signal-to-noise ratio for the signal
+currently received by the front-end. For this command, read-only access
+to the device is sufficient.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = :ref:`FE_READ_SNR <FE_READ_SNR>`,
+uint16_t *snr);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals :ref:`FE_READ_SNR <FE_READ_SNR>` for this command.
+
+    -  .. row 3
+
+       -  uint16_t *snr
+
+       -  The signal-to-noise ratio is stored into *snr.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/FE_READ_UNCORRECTED_BLOCKS.rst b/Documentation/linux_tv/media/dvb/FE_READ_UNCORRECTED_BLOCKS.rst
new file mode 100644
index 0000000..261eb20
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/FE_READ_UNCORRECTED_BLOCKS.rst
@@ -0,0 +1,66 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_READ_UNCORRECTED_BLOCKS:
+
+**************************
+FE_READ_UNCORRECTED_BLOCKS
+**************************
+
+DESCRIPTION
+
+This ioctl call returns the number of uncorrected blocks detected by the
+device driver during its lifetime. For meaningful measurements, the
+increment in block count during a specific time interval should be
+calculated. For this command, read-only access to the device is
+sufficient.
+
+SYNOPSIS
+
+int ioctl( int fd, int request =
+:ref:`FE_READ_UNCORRECTED_BLOCKS <FE_READ_UNCORRECTED_BLOCKS>`,
+uint32_t *ublocks);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals
+          :ref:`FE_READ_UNCORRECTED_BLOCKS <FE_READ_UNCORRECTED_BLOCKS>`
+          for this command.
+
+    -  .. row 3
+
+       -  uint32_t *ublocks
+
+       -  The total number of uncorrected blocks seen by the driver so far.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/FE_SET_FRONTEND.rst b/Documentation/linux_tv/media/dvb/FE_SET_FRONTEND.rst
new file mode 100644
index 0000000..885f9e3
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/FE_SET_FRONTEND.rst
@@ -0,0 +1,84 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_SET_FRONTEND:
+
+***************
+FE_SET_FRONTEND
+***************
+
+DESCRIPTION
+
+This ioctl call starts a tuning operation using specified parameters.
+The result of this call will be successful if the parameters were valid
+and the tuning could be initiated. The result of the tuning operation in
+itself, however, will arrive asynchronously as an event (see
+documentation for :ref:`FE_GET_EVENT <FE_GET_EVENT>` and
+FrontendEvent.) If a new :ref:`FE_SET_FRONTEND <FE_SET_FRONTEND>`
+operation is initiated before the previous one was completed, the
+previous operation will be aborted in favor of the new one. This command
+requires read/write access to the device.
+
+SYNOPSIS
+
+int ioctl(int fd, int request =
+:ref:`FE_SET_FRONTEND <FE_SET_FRONTEND>`, struct
+dvb_frontend_parameters *p);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals :ref:`FE_SET_FRONTEND <FE_SET_FRONTEND>` for this
+          command.
+
+    -  .. row 3
+
+       -  struct dvb_frontend_parameters *p
+
+       -  Points to parameters for tuning operation.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  Maximum supported symbol rate reached.
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/audio.rst b/Documentation/linux_tv/media/dvb/audio.rst
new file mode 100644
index 0000000..d6b6f9e
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/audio.rst
@@ -0,0 +1,37 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb_audio:
+
+################
+DVB Audio Device
+################
+The DVB audio device controls the MPEG2 audio decoder of the DVB
+hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data
+types and and ioctl definitions can be accessed by including
+``linux/dvb/audio.h`` in your application.
+
+Please note that some DVB cards don’t have their own MPEG decoder, which
+results in the omission of the audio and video device.
+
+These ioctls were also used by V4L2 to control MPEG decoders implemented
+in V4L2. The use of these ioctls for that purpose has been made obsolete
+and proper V4L2 ioctls or controls have been created to replace that
+functionality.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    audio_data_types
+    audio_function_calls
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/audio_data_types.rst b/Documentation/linux_tv/media/dvb/audio_data_types.rst
new file mode 100644
index 0000000..b3f5aa0
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/audio_data_types.rst
@@ -0,0 +1,187 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _audio_data_types:
+
+****************
+Audio Data Types
+****************
+
+This section describes the structures, data types and defines used when
+talking to the audio device.
+
+
+.. _audio-stream-source-t:
+
+audio_stream_source_t
+=====================
+
+The audio stream source is set through the AUDIO_SELECT_SOURCE call
+and can take the following values, depending on whether we are replaying
+from an internal (demux) or external (user write) source.
+
+
+.. code-block:: c
+
+    typedef enum {
+        AUDIO_SOURCE_DEMUX,
+        AUDIO_SOURCE_MEMORY
+    } audio_stream_source_t;
+
+AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the
+frontend or the DVR device) as the source of the video stream. If
+AUDIO_SOURCE_MEMORY is selected the stream comes from the application
+through the ``write()`` system call.
+
+
+.. _audio-play-state-t:
+
+audio_play_state_t
+==================
+
+The following values can be returned by the AUDIO_GET_STATUS call
+representing the state of audio playback.
+
+
+.. code-block:: c
+
+    typedef enum {
+        AUDIO_STOPPED,
+        AUDIO_PLAYING,
+        AUDIO_PAUSED
+    } audio_play_state_t;
+
+
+.. _audio-channel-select-t:
+
+audio_channel_select_t
+======================
+
+The audio channel selected via AUDIO_CHANNEL_SELECT is determined by
+the following values.
+
+
+.. code-block:: c
+
+    typedef enum {
+        AUDIO_STEREO,
+        AUDIO_MONO_LEFT,
+        AUDIO_MONO_RIGHT,
+        AUDIO_MONO,
+        AUDIO_STEREO_SWAPPED
+    } audio_channel_select_t;
+
+
+.. _audio-status:
+
+struct audio_status
+===================
+
+The AUDIO_GET_STATUS call returns the following structure informing
+about various states of the playback operation.
+
+
+.. code-block:: c
+
+    typedef struct audio_status {
+        boolean AV_sync_state;
+        boolean mute_state;
+        audio_play_state_t play_state;
+        audio_stream_source_t stream_source;
+        audio_channel_select_t channel_select;
+        boolean bypass_mode;
+        audio_mixer_t mixer_state;
+    } audio_status_t;
+
+
+.. _audio-mixer:
+
+struct audio_mixer
+==================
+
+The following structure is used by the AUDIO_SET_MIXER call to set the
+audio volume.
+
+
+.. code-block:: c
+
+    typedef struct audio_mixer {
+        unsigned int volume_left;
+        unsigned int volume_right;
+    } audio_mixer_t;
+
+
+.. _audio_encodings:
+
+audio encodings
+===============
+
+A call to AUDIO_GET_CAPABILITIES returns an unsigned integer with the
+following bits set according to the hardwares capabilities.
+
+
+.. code-block:: c
+
+     #define AUDIO_CAP_DTS    1
+     #define AUDIO_CAP_LPCM   2
+     #define AUDIO_CAP_MP1    4
+     #define AUDIO_CAP_MP2    8
+     #define AUDIO_CAP_MP3   16
+     #define AUDIO_CAP_AAC   32
+     #define AUDIO_CAP_OGG   64
+     #define AUDIO_CAP_SDDS 128
+     #define AUDIO_CAP_AC3  256
+
+
+.. _audio-karaoke:
+
+struct audio_karaoke
+====================
+
+The ioctl AUDIO_SET_KARAOKE uses the following format:
+
+
+.. code-block:: c
+
+    typedef
+    struct audio_karaoke {
+        int vocal1;
+        int vocal2;
+        int melody;
+    } audio_karaoke_t;
+
+If Vocal1 or Vocal2 are non-zero, they get mixed into left and right t
+at 70% each. If both, Vocal1 and Vocal2 are non-zero, Vocal1 gets mixed
+into the left channel and Vocal2 into the right channel at 100% each. Ff
+Melody is non-zero, the melody channel gets mixed into left and right.
+
+
+.. _audio-attributes-t:
+
+audio attributes
+================
+
+The following attributes can be set by a call to AUDIO_SET_ATTRIBUTES:
+
+
+.. code-block:: c
+
+     typedef uint16_t audio_attributes_t;
+     /*   bits: descr. */
+     /*   15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */
+     /*   12    multichannel extension */
+     /*   11-10 audio type (0=not spec, 1=language included) */
+     /*    9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */
+     /*    7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit,  */
+     /*    5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */
+     /*    2- 0 number of audio channels (n+1 channels) */
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/audio_function_calls.rst b/Documentation/linux_tv/media/dvb/audio_function_calls.rst
new file mode 100644
index 0000000..41a5757
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/audio_function_calls.rst
@@ -0,0 +1,1308 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _audio_function_calls:
+
+********************
+Audio Function Calls
+********************
+
+
+.. _audio_fopen:
+
+open()
+======
+
+DESCRIPTION
+
+This system call opens a named audio device (e.g.
+/dev/dvb/adapter0/audio0) for subsequent use. When an open() call has
+succeeded, the device will be ready for use. The significance of
+blocking or non-blocking mode is described in the documentation for
+functions where there is a difference. It does not affect the semantics
+of the open() call itself. A device opened in blocking mode can later be
+put into non-blocking mode (and vice versa) using the F_SETFL command
+of the fcntl system call. This is a standard system call, documented in
+the Linux manual page for fcntl. Only one user can open the Audio Device
+in O_RDWR mode. All other attempts to open the device in this mode will
+fail, and an error code will be returned. If the Audio Device is opened
+in O_RDONLY mode, the only ioctl call that can be used is
+AUDIO_GET_STATUS. All other call will return with an error code.
+
+SYNOPSIS
+
+int open(const char *deviceName, int flags);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char *deviceName
+
+       -  Name of specific audio device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -  
+       -  O_RDONLY read-only access
+
+    -  .. row 4
+
+       -  
+       -  O_RDWR read/write access
+
+    -  .. row 5
+
+       -  
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 6
+
+       -  
+       -  (blocking mode is the default)
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ENODEV
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  EBUSY
+
+       -  Device or resource busy.
+
+    -  .. row 3
+
+       -  EINVAL
+
+       -  Invalid argument.
+
+
+
+.. _audio_fclose:
+
+close()
+=======
+
+DESCRIPTION
+
+This system call closes a previously opened audio device.
+
+SYNOPSIS
+
+int close(int fd);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EBADF
+
+       -  fd is not a valid open file descriptor.
+
+
+
+.. _audio_fwrite:
+
+write()
+=======
+
+DESCRIPTION
+
+This system call can only be used if AUDIO_SOURCE_MEMORY is selected
+in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in
+PES format. If O_NONBLOCK is not specified the function will block
+until buffer space is available. The amount of data to be transferred is
+implied by count.
+
+SYNOPSIS
+
+size_t write(int fd, const void *buf, size_t count);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void *buf
+
+       -  Pointer to the buffer containing the PES data.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EPERM
+
+       -  Mode AUDIO_SOURCE_MEMORY not selected.
+
+    -  .. row 2
+
+       -  ENOMEM
+
+       -  Attempted to write more data than the internal buffer can hold.
+
+    -  .. row 3
+
+       -  EBADF
+
+       -  fd is not a valid open file descriptor.
+
+
+
+.. _AUDIO_STOP:
+
+AUDIO_STOP
+==========
+
+DESCRIPTION
+
+This ioctl call asks the Audio Device to stop playing the current
+stream.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_STOP);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_STOP for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_PLAY:
+
+AUDIO_PLAY
+==========
+
+DESCRIPTION
+
+This ioctl call asks the Audio Device to start playing an audio stream
+from the selected source.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_PLAY);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_PLAY for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_PAUSE:
+
+AUDIO_PAUSE
+===========
+
+DESCRIPTION
+
+This ioctl call suspends the audio stream being played. Decoding and
+playing are paused. It is then possible to restart again decoding and
+playing process of the audio stream using AUDIO_CONTINUE command.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_PAUSE);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_PAUSE for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_CONTINUE:
+
+AUDIO_CONTINUE
+==============
+
+DESCRIPTION
+
+This ioctl restarts the decoding and playing process previously paused
+with AUDIO_PAUSE command.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_CONTINUE);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_CONTINUE for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_SELECT_SOURCE:
+
+AUDIO_SELECT_SOURCE
+===================
+
+DESCRIPTION
+
+This ioctl call informs the audio device which source shall be used for
+the input data. The possible sources are demux or memory. If
+AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device
+through the write command.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_SELECT_SOURCE,
+audio_stream_source_t source);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SELECT_SOURCE for this command.
+
+    -  .. row 3
+
+       -  audio_stream_source_t source
+
+       -  Indicates the source that shall be used for the Audio stream.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_SET_MUTE:
+
+AUDIO_SET_MUTE
+==============
+
+DESCRIPTION
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD <vidioc-decoder-cmd>` with the
+``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead.
+
+This ioctl call asks the audio device to mute the stream that is
+currently being played.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_SET_MUTE, boolean state);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_MUTE for this command.
+
+    -  .. row 3
+
+       -  boolean state
+
+       -  Indicates if audio device shall mute or not.
+
+    -  .. row 4
+
+       -  
+       -  TRUE Audio Mute
+
+    -  .. row 5
+
+       -  
+       -  FALSE Audio Un-mute
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_SET_AV_SYNC:
+
+AUDIO_SET_AV_SYNC
+=================
+
+DESCRIPTION
+
+This ioctl call asks the Audio Device to turn ON or OFF A/V
+synchronization.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_SET_AV_SYNC, boolean state);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_AV_SYNC for this command.
+
+    -  .. row 3
+
+       -  boolean state
+
+       -  Tells the DVB subsystem if A/V synchronization shall be ON or OFF.
+
+    -  .. row 4
+
+       -  
+       -  TRUE AV-sync ON
+
+    -  .. row 5
+
+       -  
+       -  FALSE AV-sync OFF
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_SET_BYPASS_MODE:
+
+AUDIO_SET_BYPASS_MODE
+=====================
+
+DESCRIPTION
+
+This ioctl call asks the Audio Device to bypass the Audio decoder and
+forward the stream without decoding. This mode shall be used if streams
+that can’t be handled by the DVB system shall be decoded. Dolby
+DigitalTM streams are automatically forwarded by the DVB subsystem if
+the hardware can handle it.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_SET_BYPASS_MODE, boolean mode);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_BYPASS_MODE for this command.
+
+    -  .. row 3
+
+       -  boolean mode
+
+       -  Enables or disables the decoding of the current Audio stream in
+          the DVB subsystem.
+
+    -  .. row 4
+
+       -  
+       -  TRUE Bypass is disabled
+
+    -  .. row 5
+
+       -  
+       -  FALSE Bypass is enabled
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_CHANNEL_SELECT:
+
+AUDIO_CHANNEL_SELECT
+====================
+
+DESCRIPTION
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead.
+
+This ioctl call asks the Audio Device to select the requested channel if
+possible.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_CHANNEL_SELECT,
+audio_channel_select_t);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_CHANNEL_SELECT for this command.
+
+    -  .. row 3
+
+       -  audio_channel_select_t ch
+
+       -  Select the output format of the audio (mono left/right, stereo).
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_BILINGUAL_CHANNEL_SELECT:
+
+AUDIO_BILINGUAL_CHANNEL_SELECT
+==============================
+
+DESCRIPTION
+
+This ioctl is obsolete. Do not use in new drivers. It has been replaced
+by the V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` control
+for MPEG decoders controlled through V4L2.
+
+This ioctl call asks the Audio Device to select the requested channel
+for bilingual streams if possible.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_BILINGUAL_CHANNEL_SELECT,
+audio_channel_select_t);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this command.
+
+    -  .. row 3
+
+       -  audio_channel_select_t ch
+
+       -  Select the output format of the audio (mono left/right, stereo).
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_GET_PTS:
+
+AUDIO_GET_PTS
+=============
+
+DESCRIPTION
+
+This ioctl is obsolete. Do not use in new drivers. If you need this
+functionality, then please contact the linux-media mailing list
+(`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__).
+
+This ioctl call asks the Audio Device to return the current PTS
+timestamp.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_GET_PTS, __u64 *pts);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_GET_PTS for this command.
+
+    -  .. row 3
+
+       -  __u64 *pts
+
+       -  Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 /
+          ISO/IEC 13818-1.
+
+          The PTS should belong to the currently played frame if possible,
+          but may also be a value close to it like the PTS of the last
+          decoded frame or the last PTS extracted by the PES parser.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_GET_STATUS:
+
+AUDIO_GET_STATUS
+================
+
+DESCRIPTION
+
+This ioctl call asks the Audio Device to return the current state of the
+Audio Device.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_GET_STATUS, struct audio_status
+*status);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_GET_STATUS for this command.
+
+    -  .. row 3
+
+       -  struct audio_status *status
+
+       -  Returns the current state of Audio Device.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_GET_CAPABILITIES:
+
+AUDIO_GET_CAPABILITIES
+======================
+
+DESCRIPTION
+
+This ioctl call asks the Audio Device to tell us about the decoding
+capabilities of the audio hardware.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_GET_CAPABILITIES, unsigned int
+*cap);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_GET_CAPABILITIES for this command.
+
+    -  .. row 3
+
+       -  unsigned int *cap
+
+       -  Returns a bit array of supported sound formats.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_CLEAR_BUFFER:
+
+AUDIO_CLEAR_BUFFER
+==================
+
+DESCRIPTION
+
+This ioctl call asks the Audio Device to clear all software and hardware
+buffers of the audio decoder device.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_CLEAR_BUFFER);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_CLEAR_BUFFER for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_SET_ID:
+
+AUDIO_SET_ID
+============
+
+DESCRIPTION
+
+This ioctl selects which sub-stream is to be decoded if a program or
+system stream is sent to the video device. If no audio stream type is
+set the id has to be in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for
+AC3 and in [0xA0,0xA7] for LPCM. More specifications may follow for
+other stream types. If the stream type is set the id just specifies the
+substream id of the audio stream and only the first 5 bits are
+recognized.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_SET_ID, int id);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_ID for this command.
+
+    -  .. row 3
+
+       -  int id
+
+       -  audio sub-stream id
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_SET_MIXER:
+
+AUDIO_SET_MIXER
+===============
+
+DESCRIPTION
+
+This ioctl lets you adjust the mixer settings of the audio decoder.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = AUDIO_SET_MIXER, audio_mixer_t
+*mix);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_ID for this command.
+
+    -  .. row 3
+
+       -  audio_mixer_t *mix
+
+       -  mixer settings.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _AUDIO_SET_STREAMTYPE:
+
+AUDIO_SET_STREAMTYPE
+====================
+
+DESCRIPTION
+
+This ioctl tells the driver which kind of audio stream to expect. This
+is useful if the stream offers several audio sub-streams like LPCM and
+AC3.
+
+SYNOPSIS
+
+int ioctl(fd, int request = AUDIO_SET_STREAMTYPE, int type);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_STREAMTYPE for this command.
+
+    -  .. row 3
+
+       -  int type
+
+       -  stream type
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  type is not a valid or supported stream type.
+
+
+
+.. _AUDIO_SET_EXT_ID:
+
+AUDIO_SET_EXT_ID
+================
+
+DESCRIPTION
+
+This ioctl can be used to set the extension id for MPEG streams in DVD
+playback. Only the first 3 bits are recognized.
+
+SYNOPSIS
+
+int ioctl(fd, int request = AUDIO_SET_EXT_ID, int id);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_EXT_ID for this command.
+
+    -  .. row 3
+
+       -  int id
+
+       -  audio sub_stream_id
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  id is not a valid id.
+
+
+
+.. _AUDIO_SET_ATTRIBUTES:
+
+AUDIO_SET_ATTRIBUTES
+====================
+
+DESCRIPTION
+
+This ioctl is intended for DVD playback and allows you to set certain
+information about the audio stream.
+
+SYNOPSIS
+
+int ioctl(fd, int request = AUDIO_SET_ATTRIBUTES, audio_attributes_t
+attr );
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_ATTRIBUTES for this command.
+
+    -  .. row 3
+
+       -  audio_attributes_t attr
+
+       -  audio attributes according to section ??
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  attr is not a valid or supported attribute setting.
+
+
+
+.. _AUDIO_SET_KARAOKE:
+
+AUDIO_SET_KARAOKE
+=================
+
+DESCRIPTION
+
+This ioctl allows one to set the mixer settings for a karaoke DVD.
+
+SYNOPSIS
+
+int ioctl(fd, int request = AUDIO_SET_KARAOKE, audio_karaoke_t
+*karaoke);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_KARAOKE for this command.
+
+    -  .. row 3
+
+       -  audio_karaoke_t *karaoke
+
+       -  karaoke settings according to section ??.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  karaoke is not a valid or supported karaoke setting.
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/audio_h.rst b/Documentation/linux_tv/media/dvb/audio_h.rst
new file mode 100644
index 0000000..09a73a5
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/audio_h.rst
@@ -0,0 +1,24 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _audio_h:
+
+*********************
+DVB Audio Header File
+*********************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    ../../audio.h
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/ca.rst b/Documentation/linux_tv/media/dvb/ca.rst
new file mode 100644
index 0000000..bb01d93
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/ca.rst
@@ -0,0 +1,29 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb_ca:
+
+#############
+DVB CA Device
+#############
+The DVB CA device controls the conditional access hardware. It can be
+accessed through ``/dev/dvb/adapter?/ca?``. Data types and and ioctl
+definitions can be accessed by including ``linux/dvb/ca.h`` in your
+application.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    ca_data_types
+    ca_function_calls
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/ca_data_types.rst b/Documentation/linux_tv/media/dvb/ca_data_types.rst
new file mode 100644
index 0000000..bb0cdfa
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/ca_data_types.rst
@@ -0,0 +1,121 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _ca_data_types:
+
+*************
+CA Data Types
+*************
+
+
+.. _ca-slot-info:
+
+ca_slot_info_t
+==============
+
+
+.. code-block:: c
+
+    typedef struct ca_slot_info {
+        int num;               /* slot number */
+
+        int type;              /* CA interface this slot supports */
+    #define CA_CI            1     /* CI high level interface */
+    #define CA_CI_LINK       2     /* CI link layer level interface */
+    #define CA_CI_PHYS       4     /* CI physical layer level interface */
+    #define CA_DESCR         8     /* built-in descrambler */
+    #define CA_SC          128     /* simple smart card interface */
+
+        unsigned int flags;
+    #define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+    #define CA_CI_MODULE_READY   2
+    } ca_slot_info_t;
+
+
+.. _ca-descr-info:
+
+ca_descr_info_t
+===============
+
+
+.. code-block:: c
+
+    typedef struct ca_descr_info {
+        unsigned int num;  /* number of available descramblers (keys) */
+        unsigned int type; /* type of supported scrambling system */
+    #define CA_ECD           1
+    #define CA_NDS           2
+    #define CA_DSS           4
+    } ca_descr_info_t;
+
+
+.. _ca-caps:
+
+ca_caps_t
+=========
+
+
+.. code-block:: c
+
+    typedef struct ca_caps {
+        unsigned int slot_num;  /* total number of CA card and module slots */
+        unsigned int slot_type; /* OR of all supported types */
+        unsigned int descr_num; /* total number of descrambler slots (keys) */
+        unsigned int descr_type;/* OR of all supported types */
+     } ca_cap_t;
+
+
+.. _ca-msg:
+
+ca_msg_t
+========
+
+
+.. code-block:: c
+
+    /* a message to/from a CI-CAM */
+    typedef struct ca_msg {
+        unsigned int index;
+        unsigned int type;
+        unsigned int length;
+        unsigned char msg[256];
+    } ca_msg_t;
+
+
+.. _ca-descr:
+
+ca_descr_t
+==========
+
+
+.. code-block:: c
+
+    typedef struct ca_descr {
+        unsigned int index;
+        unsigned int parity;
+        unsigned char cw[8];
+    } ca_descr_t;
+
+
+.. _ca-pid:
+
+ca-pid
+======
+
+
+.. code-block:: c
+
+    typedef struct ca_pid {
+        unsigned int pid;
+        int index;      /* -1 == disable*/
+    } ca_pid_t;
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/ca_function_calls.rst b/Documentation/linux_tv/media/dvb/ca_function_calls.rst
new file mode 100644
index 0000000..9984b35
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/ca_function_calls.rst
@@ -0,0 +1,541 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _ca_function_calls:
+
+*****************
+CA Function Calls
+*****************
+
+
+.. _ca_fopen:
+
+open()
+======
+
+DESCRIPTION
+
+This system call opens a named ca device (e.g. /dev/ost/ca) for
+subsequent use.
+
+When an open() call has succeeded, the device will be ready for use. The
+significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the open() call itself. A device opened in
+blocking mode can later be put into non-blocking mode (and vice versa)
+using the F_SETFL command of the fcntl system call. This is a standard
+system call, documented in the Linux manual page for fcntl. Only one
+user can open the CA Device in O_RDWR mode. All other attempts to open
+the device in this mode will fail, and an error code will be returned.
+
+SYNOPSIS
+
+int open(const char *deviceName, int flags);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char *deviceName
+
+       -  Name of specific video device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -  
+       -  O_RDONLY read-only access
+
+    -  .. row 4
+
+       -  
+       -  O_RDWR read/write access
+
+    -  .. row 5
+
+       -  
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 6
+
+       -  
+       -  (blocking mode is the default)
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ENODEV
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  EINTERNAL
+
+       -  Internal error.
+
+    -  .. row 3
+
+       -  EBUSY
+
+       -  Device or resource busy.
+
+    -  .. row 4
+
+       -  EINVAL
+
+       -  Invalid argument.
+
+
+
+.. _ca_fclose:
+
+close()
+=======
+
+DESCRIPTION
+
+This system call closes a previously opened audio device.
+
+SYNOPSIS
+
+int close(int fd);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EBADF
+
+       -  fd is not a valid open file descriptor.
+
+
+
+.. _CA_RESET:
+
+CA_RESET
+========
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = CA_RESET);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_RESET for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _CA_GET_CAP:
+
+CA_GET_CAP
+==========
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = CA_GET_CAP, ca_caps_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_GET_CAP for this command.
+
+    -  .. row 3
+
+       -  ca_caps_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _CA_GET_SLOT_INFO:
+
+CA_GET_SLOT_INFO
+================
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = CA_GET_SLOT_INFO, ca_slot_info_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_GET_SLOT_INFO for this command.
+
+    -  .. row 3
+
+       -  ca_slot_info_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _CA_GET_DESCR_INFO:
+
+CA_GET_DESCR_INFO
+=================
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = CA_GET_DESCR_INFO, ca_descr_info_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_GET_DESCR_INFO for this command.
+
+    -  .. row 3
+
+       -  ca_descr_info_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _CA_GET_MSG:
+
+CA_GET_MSG
+==========
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = CA_GET_MSG, ca_msg_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_GET_MSG for this command.
+
+    -  .. row 3
+
+       -  ca_msg_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _CA_SEND_MSG:
+
+CA_SEND_MSG
+===========
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = CA_SEND_MSG, ca_msg_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_SEND_MSG for this command.
+
+    -  .. row 3
+
+       -  ca_msg_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _CA_SET_DESCR:
+
+CA_SET_DESCR
+============
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = CA_SET_DESCR, ca_descr_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_SET_DESCR for this command.
+
+    -  .. row 3
+
+       -  ca_descr_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _CA_SET_PID:
+
+CA_SET_PID
+==========
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = CA_SET_PID, ca_pid_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_SET_PID for this command.
+
+    -  .. row 3
+
+       -  ca_pid_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/ca_h.rst b/Documentation/linux_tv/media/dvb/ca_h.rst
new file mode 100644
index 0000000..229bfbc
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/ca_h.rst
@@ -0,0 +1,24 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _ca_h:
+
+**********************************
+DVB Conditional Access Header File
+**********************************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    ../../ca.h
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/demux.rst b/Documentation/linux_tv/media/dvb/demux.rst
new file mode 100644
index 0000000..3bcee72
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/demux.rst
@@ -0,0 +1,29 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb_demux:
+
+################
+DVB Demux Device
+################
+The DVB demux device controls the filters of the DVB hardware/software.
+It can be accessed through ``/dev/adapter?/demux?``. Data types and and
+ioctl definitions can be accessed by including ``linux/dvb/dmx.h`` in
+your application.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    dmx_types
+    dmx_fcalls
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dmx_fcalls.rst b/Documentation/linux_tv/media/dvb/dmx_fcalls.rst
new file mode 100644
index 0000000..5982b57
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dmx_fcalls.rst
@@ -0,0 +1,1013 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dmx_fcalls:
+
+********************
+Demux Function Calls
+********************
+
+
+.. _dmx_fopen:
+
+open()
+======
+
+DESCRIPTION
+
+This system call, used with a device name of /dev/dvb/adapter0/demux0,
+allocates a new filter and returns a handle which can be used for
+subsequent control of that filter. This call has to be made for each
+filter to be used, i.e. every returned file descriptor is a reference to
+a single filter. /dev/dvb/adapter0/dvr0 is a logical device to be used
+for retrieving Transport Streams for digital video recording. When
+reading from this device a transport stream containing the packets from
+all PES filters set in the corresponding demux device
+(/dev/dvb/adapter0/demux0) having the output set to DMX_OUT_TS_TAP. A
+recorded Transport Stream is replayed by writing to this device.
+
+The significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the open() call itself. A device opened in
+blocking mode can later be put into non-blocking mode (and vice versa)
+using the F_SETFL command of the fcntl system call.
+
+SYNOPSIS
+
+int open(const char *deviceName, int flags);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char *deviceName
+
+       -  Name of demux device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -  
+       -  O_RDWR read/write access
+
+    -  .. row 4
+
+       -  
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 5
+
+       -  
+       -  (blocking mode is the default)
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ENODEV
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  EINVAL
+
+       -  Invalid argument.
+
+    -  .. row 3
+
+       -  EMFILE
+
+       -  “Too many open files”, i.e. no more filters available.
+
+    -  .. row 4
+
+       -  ENOMEM
+
+       -  The driver failed to allocate enough memory.
+
+
+
+.. _dmx_fclose:
+
+close()
+=======
+
+DESCRIPTION
+
+This system call deactivates and deallocates a filter that was
+previously allocated via the open() call.
+
+SYNOPSIS
+
+int close(int fd);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EBADF
+
+       -  fd is not a valid open file descriptor.
+
+
+
+.. _dmx_fread:
+
+read()
+======
+
+DESCRIPTION
+
+This system call returns filtered data, which might be section or PES
+data. The filtered data is transferred from the driver’s internal
+circular buffer to buf. The maximum amount of data to be transferred is
+implied by count.
+
+SYNOPSIS
+
+size_t read(int fd, void *buf, size_t count);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void *buf
+
+       -  Pointer to the buffer to be used for returned filtered data.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EWOULDBLOCK
+
+       -  No data to return and O_NONBLOCK was specified.
+
+    -  .. row 2
+
+       -  EBADF
+
+       -  fd is not a valid open file descriptor.
+
+    -  .. row 3
+
+       -  ECRC
+
+       -  Last section had a CRC error - no data returned. The buffer is
+          flushed.
+
+    -  .. row 4
+
+       -  EOVERFLOW
+
+       -  
+
+    -  .. row 5
+
+       -  
+       -  The filtered data was not read from the buffer in due time,
+          resulting in non-read data being lost. The buffer is flushed.
+
+    -  .. row 6
+
+       -  ETIMEDOUT
+
+       -  The section was not loaded within the stated timeout period. See
+          ioctl DMX_SET_FILTER for how to set a timeout.
+
+    -  .. row 7
+
+       -  EFAULT
+
+       -  The driver failed to write to the callers buffer due to an invalid
+          *buf pointer.
+
+
+
+.. _dmx_fwrite:
+
+write()
+=======
+
+DESCRIPTION
+
+This system call is only provided by the logical device
+/dev/dvb/adapter0/dvr0, associated with the physical demux device that
+provides the actual DVR functionality. It is used for replay of a
+digitally recorded Transport Stream. Matching filters have to be defined
+in the corresponding physical demux device, /dev/dvb/adapter0/demux0.
+The amount of data to be transferred is implied by count.
+
+SYNOPSIS
+
+ssize_t write(int fd, const void *buf, size_t count);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void *buf
+
+       -  Pointer to the buffer containing the Transport Stream.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EWOULDBLOCK
+
+       -  No data was written. This might happen if O_NONBLOCK was
+          specified and there is no more buffer space available (if
+          O_NONBLOCK is not specified the function will block until buffer
+          space is available).
+
+    -  .. row 2
+
+       -  EBUSY
+
+       -  This error code indicates that there are conflicting requests. The
+          corresponding demux device is setup to receive data from the
+          front- end. Make sure that these filters are stopped and that the
+          filters with input set to DMX_IN_DVR are started.
+
+    -  .. row 3
+
+       -  EBADF
+
+       -  fd is not a valid open file descriptor.
+
+
+
+.. _DMX_START:
+
+DMX_START
+=========
+
+DESCRIPTION
+
+This ioctl call is used to start the actual filtering operation defined
+via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER.
+
+SYNOPSIS
+
+int ioctl( int fd, int request = DMX_START);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_START for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  Invalid argument, i.e. no filtering parameters provided via the
+          DMX_SET_FILTER or DMX_SET_PES_FILTER functions.
+
+    -  .. row 2
+
+       -  EBUSY
+
+       -  This error code indicates that there are conflicting requests.
+          There are active filters filtering data from another input source.
+          Make sure that these filters are stopped before starting this
+          filter.
+
+
+
+.. _DMX_STOP:
+
+DMX_STOP
+========
+
+DESCRIPTION
+
+This ioctl call is used to stop the actual filtering operation defined
+via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER and
+started via the DMX_START command.
+
+SYNOPSIS
+
+int ioctl( int fd, int request = DMX_STOP);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_STOP for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _DMX_SET_FILTER:
+
+DMX_SET_FILTER
+==============
+
+DESCRIPTION
+
+This ioctl call sets up a filter according to the filter and mask
+parameters provided. A timeout may be defined stating number of seconds
+to wait for a section to be loaded. A value of 0 means that no timeout
+should be applied. Finally there is a flag field where it is possible to
+state whether a section should be CRC-checked, whether the filter should
+be a ”one-shot” filter, i.e. if the filtering operation should be
+stopped after the first section is received, and whether the filtering
+operation should be started immediately (without waiting for a
+DMX_START ioctl call). If a filter was previously set-up, this filter
+will be canceled, and the receive buffer will be flushed.
+
+SYNOPSIS
+
+int ioctl( int fd, int request = DMX_SET_FILTER, struct
+dmx_sct_filter_params *params);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_SET_FILTER for this command.
+
+    -  .. row 3
+
+       -  struct dmx_sct_filter_params *params
+
+       -  Pointer to structure containing filter parameters.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _DMX_SET_PES_FILTER:
+
+DMX_SET_PES_FILTER
+==================
+
+DESCRIPTION
+
+This ioctl call sets up a PES filter according to the parameters
+provided. By a PES filter is meant a filter that is based just on the
+packet identifier (PID), i.e. no PES header or payload filtering
+capability is supported.
+
+SYNOPSIS
+
+int ioctl( int fd, int request = DMX_SET_PES_FILTER, struct
+dmx_pes_filter_params *params);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_SET_PES_FILTER for this command.
+
+    -  .. row 3
+
+       -  struct dmx_pes_filter_params *params
+
+       -  Pointer to structure containing filter parameters.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EBUSY
+
+       -  This error code indicates that there are conflicting requests.
+          There are active filters filtering data from another input source.
+          Make sure that these filters are stopped before starting this
+          filter.
+
+
+
+.. _DMX_SET_BUFFER_SIZE:
+
+DMX_SET_BUFFER_SIZE
+===================
+
+DESCRIPTION
+
+This ioctl call is used to set the size of the circular buffer used for
+filtered data. The default size is two maximum sized sections, i.e. if
+this function is not called a buffer size of 2 * 4096 bytes will be
+used.
+
+SYNOPSIS
+
+int ioctl( int fd, int request = DMX_SET_BUFFER_SIZE, unsigned long
+size);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_SET_BUFFER_SIZE for this command.
+
+    -  .. row 3
+
+       -  unsigned long size
+
+       -  Size of circular buffer.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _DMX_GET_EVENT:
+
+DMX_GET_EVENT
+=============
+
+DESCRIPTION
+
+This ioctl call returns an event if available. If an event is not
+available, the behavior depends on whether the device is in blocking or
+non-blocking mode. In the latter case, the call fails immediately with
+errno set to EWOULDBLOCK. In the former case, the call blocks until an
+event becomes available.
+
+SYNOPSIS
+
+int ioctl( int fd, int request = DMX_GET_EVENT, struct dmx_event
+*ev);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_GET_EVENT for this command.
+
+    -  .. row 3
+
+       -  struct dmx_event *ev
+
+       -  Pointer to the location where the event is to be stored.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EWOULDBLOCK
+
+       -  There is no event pending, and the device is in non-blocking mode.
+
+
+
+.. _DMX_GET_STC:
+
+DMX_GET_STC
+===========
+
+DESCRIPTION
+
+This ioctl call returns the current value of the system time counter
+(which is driven by a PES filter of type DMX_PES_PCR). Some hardware
+supports more than one STC, so you must specify which one by setting the
+num field of stc before the ioctl (range 0...n). The result is returned
+in form of a ratio with a 64 bit numerator and a 32 bit denominator, so
+the real 90kHz STC value is stc->stc / stc->base .
+
+SYNOPSIS
+
+int ioctl( int fd, int request = DMX_GET_STC, struct dmx_stc *stc);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_GET_STC for this command.
+
+    -  .. row 3
+
+       -  struct dmx_stc *stc
+
+       -  Pointer to the location where the stc is to be stored.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  Invalid stc number.
+
+
+
+.. _DMX_GET_PES_PIDS:
+
+DMX_GET_PES_PIDS
+================
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = DMX_GET_PES_PIDS, __u16[5]);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_GET_PES_PIDS for this command.
+
+    -  .. row 3
+
+       -  __u16[5]
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _DMX_GET_CAPS:
+
+DMX_GET_CAPS
+============
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = DMX_GET_CAPS, dmx_caps_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_GET_CAPS for this command.
+
+    -  .. row 3
+
+       -  dmx_caps_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _DMX_SET_SOURCE:
+
+DMX_SET_SOURCE
+==============
+
+DESCRIPTION
+
+This ioctl is undocumented. Documentation is welcome.
+
+SYNOPSIS
+
+int ioctl(fd, int request = DMX_SET_SOURCE, dmx_source_t *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_SET_SOURCE for this command.
+
+    -  .. row 3
+
+       -  dmx_source_t *
+
+       -  Undocumented.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _DMX_ADD_PID:
+
+DMX_ADD_PID
+===========
+
+DESCRIPTION
+
+This ioctl call allows to add multiple PIDs to a transport stream filter
+previously set up with DMX_SET_PES_FILTER and output equal to
+DMX_OUT_TSDEMUX_TAP.
+
+SYNOPSIS
+
+int ioctl(fd, int request = DMX_ADD_PID, __u16 *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_ADD_PID for this command.
+
+    -  .. row 3
+
+       -  __u16 *
+
+       -  PID number to be filtered.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _DMX_REMOVE_PID:
+
+DMX_REMOVE_PID
+==============
+
+DESCRIPTION
+
+This ioctl call allows to remove a PID when multiple PIDs are set on a
+transport stream filter, e. g. a filter previously set up with output
+equal to DMX_OUT_TSDEMUX_TAP, created via either
+DMX_SET_PES_FILTER or DMX_ADD_PID.
+
+SYNOPSIS
+
+int ioctl(fd, int request = DMX_REMOVE_PID, __u16 *);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_REMOVE_PID for this command.
+
+    -  .. row 3
+
+       -  __u16 *
+
+       -  PID of the PES filter to be removed.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dmx_h.rst b/Documentation/linux_tv/media/dvb/dmx_h.rst
new file mode 100644
index 0000000..19e2691
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dmx_h.rst
@@ -0,0 +1,24 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dmx_h:
+
+*********************
+DVB Demux Header File
+*********************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    ../../dmx.h
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dmx_types.rst b/Documentation/linux_tv/media/dvb/dmx_types.rst
new file mode 100644
index 0000000..8385936
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dmx_types.rst
@@ -0,0 +1,253 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dmx_types:
+
+****************
+Demux Data Types
+****************
+
+
+.. _dmx-output-t:
+
+Output for the demux
+====================
+
+
+.. _dmx-output:
+
+.. flat-table:: enum dmx_output
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`DMX-OUT-DECODER`:
+
+          DMX_OUT_DECODER
+
+       -  Streaming directly to decoder.
+
+    -  .. row 3
+
+       -  .. _`DMX-OUT-TAP`:
+
+          DMX_OUT_TAP
+
+       -  Output going to a memory buffer (to be retrieved via the read
+          command). Delivers the stream output to the demux device on which
+          the ioctl is called.
+
+    -  .. row 4
+
+       -  .. _`DMX-OUT-TS-TAP`:
+
+          DMX_OUT_TS_TAP
+
+       -  Output multiplexed into a new TS (to be retrieved by reading from
+          the logical DVR device). Routes output to the logical DVR device
+          ``/dev/dvb/adapter?/dvr?``, which delivers a TS multiplexed from
+          all filters for which ``DMX_OUT_TS_TAP`` was specified.
+
+    -  .. row 5
+
+       -  .. _`DMX-OUT-TSDEMUX-TAP`:
+
+          DMX_OUT_TSDEMUX_TAP
+
+       -  Like :ref:`DMX_OUT_TS_TAP <DMX-OUT-TS-TAP>` but retrieved
+          from the DMX device.
+
+
+
+.. _dmx-input-t:
+
+dmx_input_t
+===========
+
+
+.. code-block:: c
+
+    typedef enum
+    {
+        DMX_IN_FRONTEND, /* Input from a front-end device.  */
+        DMX_IN_DVR       /* Input from the logical DVR device.  */
+    } dmx_input_t;
+
+
+.. _dmx-pes-type-t:
+
+dmx_pes_type_t
+==============
+
+
+.. code-block:: c
+
+    typedef enum
+    {
+        DMX_PES_AUDIO0,
+        DMX_PES_VIDEO0,
+        DMX_PES_TELETEXT0,
+        DMX_PES_SUBTITLE0,
+        DMX_PES_PCR0,
+
+        DMX_PES_AUDIO1,
+        DMX_PES_VIDEO1,
+        DMX_PES_TELETEXT1,
+        DMX_PES_SUBTITLE1,
+        DMX_PES_PCR1,
+
+        DMX_PES_AUDIO2,
+        DMX_PES_VIDEO2,
+        DMX_PES_TELETEXT2,
+        DMX_PES_SUBTITLE2,
+        DMX_PES_PCR2,
+
+        DMX_PES_AUDIO3,
+        DMX_PES_VIDEO3,
+        DMX_PES_TELETEXT3,
+        DMX_PES_SUBTITLE3,
+        DMX_PES_PCR3,
+
+        DMX_PES_OTHER
+    } dmx_pes_type_t;
+
+
+.. _dmx-filter:
+
+struct dmx_filter
+=================
+
+
+.. code-block:: c
+
+     typedef struct dmx_filter
+    {
+        __u8  filter[DMX_FILTER_SIZE];
+        __u8  mask[DMX_FILTER_SIZE];
+        __u8  mode[DMX_FILTER_SIZE];
+    } dmx_filter_t;
+
+
+.. _dmx-sct-filter-params:
+
+struct dmx_sct_filter_params
+============================
+
+
+.. code-block:: c
+
+    struct dmx_sct_filter_params
+    {
+        __u16          pid;
+        dmx_filter_t   filter;
+        __u32          timeout;
+        __u32          flags;
+    #define DMX_CHECK_CRC       1
+    #define DMX_ONESHOT         2
+    #define DMX_IMMEDIATE_START 4
+    #define DMX_KERNEL_CLIENT   0x8000
+    };
+
+
+.. _dmx-pes-filter-params:
+
+struct dmx_pes_filter_params
+============================
+
+
+.. code-block:: c
+
+    struct dmx_pes_filter_params
+    {
+        __u16          pid;
+        dmx_input_t    input;
+        dmx_output_t   output;
+        dmx_pes_type_t pes_type;
+        __u32          flags;
+    };
+
+
+.. _dmx-event:
+
+struct dmx_event
+================
+
+
+.. code-block:: c
+
+     struct dmx_event
+     {
+         dmx_event_t          event;
+         time_t               timeStamp;
+         union
+         {
+             dmx_scrambling_status_t scrambling;
+         } u;
+     };
+
+
+.. _dmx-stc:
+
+struct dmx_stc
+==============
+
+
+.. code-block:: c
+
+    struct dmx_stc {
+        unsigned int num;   /* input : which STC? 0..N */
+        unsigned int base;  /* output: divisor for stc to get 90 kHz clock */
+        __u64 stc;      /* output: stc in 'base'*90 kHz units */
+    };
+
+
+.. _dmx-caps:
+
+struct dmx_caps
+===============
+
+
+.. code-block:: c
+
+     typedef struct dmx_caps {
+        __u32 caps;
+        int num_decoders;
+    } dmx_caps_t;
+
+
+.. _dmx-source-t:
+
+enum dmx_source_t
+=================
+
+
+.. code-block:: c
+
+    typedef enum {
+        DMX_SOURCE_FRONT0 = 0,
+        DMX_SOURCE_FRONT1,
+        DMX_SOURCE_FRONT2,
+        DMX_SOURCE_FRONT3,
+        DMX_SOURCE_DVR0   = 16,
+        DMX_SOURCE_DVR1,
+        DMX_SOURCE_DVR2,
+        DMX_SOURCE_DVR3
+    } dmx_source_t;
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dtv-fe-stats.rst b/Documentation/linux_tv/media/dvb/dtv-fe-stats.rst
new file mode 100644
index 0000000..17b26fa
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dtv-fe-stats.rst
@@ -0,0 +1,28 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dtv-fe-stats:
+
+*******************
+struct dtv_fe_stats
+*******************
+
+
+.. code-block:: c
+
+    #define MAX_DTV_STATS   4
+
+    struct dtv_fe_stats {
+        __u8 len;
+        struct dtv_stats stat[MAX_DTV_STATS];
+    } __packed;
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dtv-properties.rst b/Documentation/linux_tv/media/dvb/dtv-properties.rst
new file mode 100644
index 0000000..b1b2834
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dtv-properties.rst
@@ -0,0 +1,26 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dtv-properties:
+
+*********************
+struct dtv_properties
+*********************
+
+
+.. code-block:: c
+
+    struct dtv_properties {
+        __u32 num;
+        struct dtv_property *props;
+    };
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dtv-property.rst b/Documentation/linux_tv/media/dvb/dtv-property.rst
new file mode 100644
index 0000000..4dff00e
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dtv-property.rst
@@ -0,0 +1,42 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dtv-property:
+
+*******************
+struct dtv_property
+*******************
+
+
+.. code-block:: c
+
+    /* Reserved fields should be set to 0 */
+
+    struct dtv_property {
+        __u32 cmd;
+        __u32 reserved[3];
+        union {
+            __u32 data;
+            struct dtv_fe_stats st;
+            struct {
+                __u8 data[32];
+                __u32 len;
+                __u32 reserved1[3];
+                void *reserved2;
+            } buffer;
+        } u;
+        int result;
+    } __attribute__ ((packed));
+
+    /* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
+    #define DTV_IOCTL_MAX_MSGS 64
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dtv-stats.rst b/Documentation/linux_tv/media/dvb/dtv-stats.rst
new file mode 100644
index 0000000..e70e5a5
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dtv-stats.rst
@@ -0,0 +1,29 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dtv-stats:
+
+****************
+struct dtv_stats
+****************
+
+
+.. code-block:: c
+
+    struct dtv_stats {
+        __u8 scale; /* enum fecap_scale_params type */
+        union {
+            __u64 uvalue;   /* for counters and relative scales */
+            __s64 svalue;   /* for 1/1000 dB measures */
+        };
+    } __packed;
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dvb-fe-read-status.rst b/Documentation/linux_tv/media/dvb/dvb-fe-read-status.rst
new file mode 100644
index 0000000..12d8749
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dvb-fe-read-status.rst
@@ -0,0 +1,31 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb-fe-read-status:
+
+***************************************
+Querying frontend status and statistics
+***************************************
+
+Once :ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` is called, the
+frontend will run a kernel thread that will periodically check for the
+tuner lock status and provide statistics about the quality of the
+signal.
+
+The information about the frontend tuner locking status can be queried
+using :ref:`FE_READ_STATUS <FE_READ_STATUS>`.
+
+Signal statistics are provided via
+:ref:`FE_GET_PROPERTY <FE_GET_PROPERTY>`. Please note that several
+statistics require the demodulator to be fully locked (e. g. with
+FE_HAS_LOCK bit set). See
+:ref:`Frontend statistics indicators <frontend-stat-properties>` for
+more details.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dvb-frontend-event.rst b/Documentation/linux_tv/media/dvb/dvb-frontend-event.rst
new file mode 100644
index 0000000..82965e4
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dvb-frontend-event.rst
@@ -0,0 +1,26 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb-frontend-event:
+
+***************
+frontend events
+***************
+
+
+.. code-block:: c
+
+     struct dvb_frontend_event {
+         fe_status_t status;
+         struct dvb_frontend_parameters parameters;
+     };
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dvb-frontend-parameters.rst b/Documentation/linux_tv/media/dvb/dvb-frontend-parameters.rst
new file mode 100644
index 0000000..0a1766f
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dvb-frontend-parameters.rst
@@ -0,0 +1,130 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb-frontend-parameters:
+
+*******************
+frontend parameters
+*******************
+
+The kind of parameters passed to the frontend device for tuning depend
+on the kind of hardware you are using.
+
+The struct ``dvb_frontend_parameters`` uses an union with specific
+per-system parameters. However, as newer delivery systems required more
+data, the structure size weren't enough to fit, and just extending its
+size would break the existing applications. So, those parameters were
+replaced by the usage of
+:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>`
+ioctl's. The new API is flexible enough to add new parameters to
+existing delivery systems, and to add newer delivery systems.
+
+So, newer applications should use
+:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>`
+instead, in order to be able to support the newer System Delivery like
+DVB-S2, DVB-T2, DVB-C2, ISDB, etc.
+
+All kinds of parameters are combined as an union in the
+FrontendParameters structure:
+
+
+.. code-block:: c
+
+    struct dvb_frontend_parameters {
+        uint32_t frequency;     /* (absolute) frequency in Hz for QAM/OFDM */
+                    /* intermediate frequency in kHz for QPSK */
+        fe_spectral_inversion_t inversion;
+        union {
+            struct dvb_qpsk_parameters qpsk;
+            struct dvb_qam_parameters  qam;
+            struct dvb_ofdm_parameters ofdm;
+            struct dvb_vsb_parameters  vsb;
+        } u;
+    };
+
+In the case of QPSK frontends the ``frequency`` field specifies the
+intermediate frequency, i.e. the offset which is effectively added to
+the local oscillator frequency (LOF) of the LNB. The intermediate
+frequency has to be specified in units of kHz. For QAM and OFDM
+frontends the ``frequency`` specifies the absolute frequency and is
+given in Hz.
+
+
+.. _dvb-qpsk-parameters:
+
+QPSK parameters
+===============
+
+For satellite QPSK frontends you have to use the ``dvb_qpsk_parameters``
+structure:
+
+
+.. code-block:: c
+
+     struct dvb_qpsk_parameters {
+         uint32_t        symbol_rate;  /* symbol rate in Symbols per second */
+         fe_code_rate_t  fec_inner;    /* forward error correction (see above) */
+     };
+
+
+.. _dvb-qam-parameters:
+
+QAM parameters
+==============
+
+for cable QAM frontend you use the ``dvb_qam_parameters`` structure:
+
+
+.. code-block:: c
+
+     struct dvb_qam_parameters {
+         uint32_t         symbol_rate; /* symbol rate in Symbols per second */
+         fe_code_rate_t   fec_inner;   /* forward error correction (see above) */
+         fe_modulation_t  modulation;  /* modulation type (see above) */
+     };
+
+
+.. _dvb-vsb-parameters:
+
+VSB parameters
+==============
+
+ATSC frontends are supported by the ``dvb_vsb_parameters`` structure:
+
+
+.. code-block:: c
+
+    struct dvb_vsb_parameters {
+        fe_modulation_t modulation; /* modulation type (see above) */
+    };
+
+
+.. _dvb-ofdm-parameters:
+
+OFDM parameters
+===============
+
+DVB-T frontends are supported by the ``dvb_ofdm_parameters`` structure:
+
+
+.. code-block:: c
+
+     struct dvb_ofdm_parameters {
+         fe_bandwidth_t      bandwidth;
+         fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
+         fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
+         fe_modulation_t     constellation; /* modulation type (see above) */
+         fe_transmit_mode_t  transmission_mode;
+         fe_guard_interval_t guard_interval;
+         fe_hierarchy_t      hierarchy_information;
+     };
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dvbapi.rst b/Documentation/linux_tv/media/dvb/dvbapi.rst
new file mode 100644
index 0000000..5e513ac
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dvbapi.rst
@@ -0,0 +1,95 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvbapi:
+
+#############
+LINUX DVB API
+#############
+
+**Version 5.10**
+
+.. toctree::
+    :maxdepth: 1
+
+    intro
+    frontend
+    demux
+    ca
+    net
+    legacy_dvb_apis
+    examples
+    audio_h
+    ca_h
+    dmx_h
+    frontend_h
+    net_h
+    video_h
+
+
+**********************
+Revision and Copyright
+**********************
+
+
+:author:    Metzler Ralph (*J. K.*)
+:address:   rjkm@metzlerbros.de
+
+:author:    Metzler Marcus (*O. C.*)
+:address:   rjkm@metzlerbros.de
+
+:author:    Chehab Mauro (*Carvalho*)
+:address:   m.chehab@samsung.com
+:contrib:   Ported document to Docbook XML.
+
+**Copyright** 2002, 2003 : Convergence GmbH
+
+**Copyright** 2009-2015 : Mauro Carvalho Chehab
+
+:revision: 2.1.0 / 2015-05-29 (*mcc*)
+
+DocBook improvements and cleanups, in order to document the system calls
+on a more standard way and provide more description about the current
+DVB API.
+
+
+:revision: 2.0.4 / 2011-05-06 (*mcc*)
+
+Add more information about DVB APIv5, better describing the frontend
+GET/SET props ioctl's.
+
+
+:revision: 2.0.3 / 2010-07-03 (*mcc*)
+
+Add some frontend capabilities flags, present on kernel, but missing at
+the specs.
+
+
+:revision: 2.0.2 / 2009-10-25 (*mcc*)
+
+documents FE_SET_FRONTEND_TUNE_MODE and
+FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
+
+
+:revision: 2.0.1 / 2009-09-16 (*mcc*)
+
+Added ISDB-T test originally written by Patrick Boettcher
+
+
+:revision: 2.0.0 / 2009-09-06 (*mcc*)
+
+Conversion from LaTex to DocBook XML. The contents is the same as the
+original LaTex version.
+
+
+:revision: 1.0.0 / 2003-07-24 (*rjkm*)
+
+Initial revision on LaTEX.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dvbproperty-006.rst b/Documentation/linux_tv/media/dvb/dvbproperty-006.rst
new file mode 100644
index 0000000..4b89d60
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dvbproperty-006.rst
@@ -0,0 +1,21 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+**************
+Property types
+**************
+
+On :ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>`,
+the actual action is determined by the dtv_property cmd/data pairs.
+With one single ioctl, is possible to get/set up to 64 properties. The
+actual meaning of each property is described on the next sections.
+
+The available frontend property types are shown on the next section.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/dvbproperty.rst b/Documentation/linux_tv/media/dvb/dvbproperty.rst
new file mode 100644
index 0000000..a68b178
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/dvbproperty.rst
@@ -0,0 +1,122 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend-properties:
+
+DVB Frontend properties
+=======================
+
+Tuning into a Digital TV physical channel and starting decoding it
+requires changing a set of parameters, in order to control the tuner,
+the demodulator, the Linear Low-noise Amplifier (LNA) and to set the
+antenna subsystem via Satellite Equipment Control (SEC), on satellite
+systems. The actual parameters are specific to each particular digital
+TV standards, and may change as the digital TV specs evolves.
+
+In the past, the strategy used was to have a union with the parameters
+needed to tune for DVB-S, DVB-C, DVB-T and ATSC delivery systems grouped
+there. The problem is that, as the second generation standards appeared,
+those structs were not big enough to contain the additional parameters.
+Also, the union didn't have any space left to be expanded without
+breaking userspace. So, the decision was to deprecate the legacy
+union/struct based approach, in favor of a properties set approach.
+
+NOTE: on Linux DVB API version 3, setting a frontend were done via
+:ref:`struct dvb_frontend_parameters <dvb-frontend-parameters>`.
+This got replaced on version 5 (also called "S2API", as this API were
+added originally_enabled to provide support for DVB-S2), because the
+old API has a very limited support to new standards and new hardware.
+This section describes the new and recommended way to set the frontend,
+with suppports all digital TV delivery systems.
+
+Example: with the properties based approach, in order to set the tuner
+to a DVB-C channel at 651 kHz, modulated with 256-QAM, FEC 3/4 and
+symbol rate of 5.217 Mbauds, those properties should be sent to
+:ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` ioctl:
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` =
+   SYS_DVBC_ANNEX_A
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` = 651000000
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>` = QAM_256
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>` = INVERSION_AUTO
+
+-  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` = 5217000
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` = FEC_3_4
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+The code that would do the above is:
+
+
+.. code-block:: c
+
+    #include <stdio.h>
+    #include <fcntl.h>
+    #include <sys/ioctl.h>
+    #include <linux/dvb/frontend.h>
+
+    static struct dtv_property props[] = {
+        { .cmd = DTV_DELIVERY_SYSTEM, .u.data = SYS_DVBC_ANNEX_A },
+        { .cmd = DTV_FREQUENCY,       .u.data = 651000000 },
+        { .cmd = DTV_MODULATION,      .u.data = QAM_256 },
+        { .cmd = DTV_INVERSION,       .u.data = INVERSION_AUTO },
+        { .cmd = DTV_SYMBOL_RATE,     .u.data = 5217000 },
+        { .cmd = DTV_INNER_FEC,       .u.data = FEC_3_4 },
+        { .cmd = DTV_TUNE }
+    };
+
+    static struct dtv_properties dtv_prop = {
+        .num = 6, .props = props
+    };
+
+    int main(void)
+    {
+        int fd = open("/dev/dvb/adapter0/frontend0", O_RDWR);
+
+        if (!fd) {
+            perror ("open");
+            return -1;
+        }
+        if (ioctl(fd, FE_SET_PROPERTY, &dtv_prop) == -1) {
+            perror("ioctl");
+            return -1;
+        }
+        printf("Frontend set\\n");
+        return 0;
+    }
+
+NOTE: While it is possible to directly call the Kernel code like the
+above example, it is strongly recommended to use
+`libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__, as it
+provides abstraction to work with the supported digital TV standards and
+provides methods for usual operations like program scanning and to
+read/write channel descriptor files.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    dtv-stats
+    dtv-fe-stats
+    dtv-property
+    dtv-properties
+    dvbproperty-006
+    fe_property_parameters
+    frontend-stat-properties
+    frontend-property-terrestrial-systems
+    frontend-property-cable-systems
+    frontend-property-satellite-systems
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/examples.rst b/Documentation/linux_tv/media/dvb/examples.rst
new file mode 100644
index 0000000..b3a94de
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/examples.rst
@@ -0,0 +1,391 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb_examples:
+
+********
+Examples
+********
+
+In this section we would like to present some examples for using the DVB
+API.
+
+NOTE: This section is out of date, and the code below won't even
+compile. Please refer to the
+`libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__ for
+updated/recommended examples.
+
+
+.. _tuning:
+
+Tuning
+======
+
+We will start with a generic tuning subroutine that uses the frontend
+and SEC, as well as the demux devices. The example is given for QPSK
+tuners, but can easily be adjusted for QAM.
+
+
+.. code-block:: c
+
+     #include <sys/ioctl.h>
+     #include <stdio.h>
+     #include <stdint.h>
+     #include <sys/types.h>
+     #include <sys/stat.h>
+     #include <fcntl.h>
+     #include <time.h>
+     #include <unistd.h>
+
+     #include <linux/dvb/dmx.h>
+     #include <linux/dvb/frontend.h>
+     #include <linux/dvb/sec.h>
+     #include <sys/poll.h>
+
+     #define DMX "/dev/dvb/adapter0/demux1"
+     #define FRONT "/dev/dvb/adapter0/frontend1"
+     #define SEC "/dev/dvb/adapter0/sec1"
+
+     /* routine for checking if we have a signal and other status information*/
+     int FEReadStatus(int fd, fe_status_t *stat)
+     {
+         int ans;
+
+         if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){
+             perror("FE READ STATUS: ");
+             return -1;
+         }
+
+         if (*stat & FE_HAS_POWER)
+             printf("FE HAS POWER\\n");
+
+         if (*stat & FE_HAS_SIGNAL)
+             printf("FE HAS SIGNAL\\n");
+
+         if (*stat & FE_SPECTRUM_INV)
+             printf("SPEKTRUM INV\\n");
+
+         return 0;
+     }
+
+
+     /* tune qpsk */
+     /* freq:             frequency of transponder                      */
+     /* vpid, apid, tpid: PIDs of video, audio and teletext TS packets  */
+     /* diseqc:           DiSEqC address of the used LNB                */
+     /* pol:              Polarisation                                  */
+     /* srate:            Symbol Rate                                   */
+     /* fec.              FEC                                           */
+     /* lnb_lof1:         local frequency of lower LNB band             */
+     /* lnb_lof2:         local frequency of upper LNB band             */
+     /* lnb_slof:         switch frequency of LNB                       */
+
+     int set_qpsk_channel(int freq, int vpid, int apid, int tpid,
+             int diseqc, int pol, int srate, int fec, int lnb_lof1,
+             int lnb_lof2, int lnb_slof)
+     {
+         struct secCommand scmd;
+         struct secCmdSequence scmds;
+         struct dmx_pes_filter_params pesFilterParams;
+         FrontendParameters frp;
+         struct pollfd pfd[1];
+         FrontendEvent event;
+         int demux1, demux2, demux3, front;
+
+         frequency = (uint32_t) freq;
+         symbolrate = (uint32_t) srate;
+
+         if((front = open(FRONT,O_RDWR)) < 0){
+             perror("FRONTEND DEVICE: ");
+             return -1;
+         }
+
+         if((sec = open(SEC,O_RDWR)) < 0){
+             perror("SEC DEVICE: ");
+             return -1;
+         }
+
+         if (demux1 < 0){
+             if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
+                 < 0){
+                 perror("DEMUX DEVICE: ");
+                 return -1;
+             }
+         }
+
+         if (demux2 < 0){
+             if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
+                 < 0){
+                 perror("DEMUX DEVICE: ");
+                 return -1;
+             }
+         }
+
+         if (demux3 < 0){
+             if ((demux3=open(DMX, O_RDWR|O_NONBLOCK))
+                 < 0){
+                 perror("DEMUX DEVICE: ");
+                 return -1;
+             }
+         }
+
+         if (freq < lnb_slof) {
+             frp.Frequency = (freq - lnb_lof1);
+             scmds.continuousTone = SEC_TONE_OFF;
+         } else {
+             frp.Frequency = (freq - lnb_lof2);
+             scmds.continuousTone = SEC_TONE_ON;
+         }
+         frp.Inversion = INVERSION_AUTO;
+         if (pol) scmds.voltage = SEC_VOLTAGE_18;
+         else scmds.voltage = SEC_VOLTAGE_13;
+
+         scmd.type=0;
+         scmd.u.diseqc.addr=0x10;
+         scmd.u.diseqc.cmd=0x38;
+         scmd.u.diseqc.numParams=1;
+         scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) |
+             (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) |
+             (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0);
+
+         scmds.miniCommand=SEC_MINI_NONE;
+         scmds.numCommands=1;
+         scmds.commands=&scmd;
+         if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
+             perror("SEC SEND: ");
+             return -1;
+         }
+
+         if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
+             perror("SEC SEND: ");
+             return -1;
+         }
+
+         frp.u.qpsk.SymbolRate = srate;
+         frp.u.qpsk.FEC_inner = fec;
+
+         if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){
+             perror("QPSK TUNE: ");
+             return -1;
+         }
+
+         pfd[0].fd = front;
+         pfd[0].events = POLLIN;
+
+         if (poll(pfd,1,3000)){
+             if (pfd[0].revents & POLLIN){
+                 printf("Getting QPSK event\\n");
+                 if ( ioctl(front, FE_GET_EVENT, &event)
+
+                      == -EOVERFLOW){
+                     perror("qpsk get event");
+                     return -1;
+                 }
+                 printf("Received ");
+                 switch(event.type){
+                 case FE_UNEXPECTED_EV:
+                     printf("unexpected event\\n");
+                     return -1;
+                 case FE_FAILURE_EV:
+                     printf("failure event\\n");
+                     return -1;
+
+                 case FE_COMPLETION_EV:
+                     printf("completion event\\n");
+                 }
+             }
+         }
+
+
+         pesFilterParams.pid     = vpid;
+         pesFilterParams.input   = DMX_IN_FRONTEND;
+         pesFilterParams.output  = DMX_OUT_DECODER;
+         pesFilterParams.pes_type = DMX_PES_VIDEO;
+         pesFilterParams.flags   = DMX_IMMEDIATE_START;
+         if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
+             perror("set_vpid");
+             return -1;
+         }
+
+         pesFilterParams.pid     = apid;
+         pesFilterParams.input   = DMX_IN_FRONTEND;
+         pesFilterParams.output  = DMX_OUT_DECODER;
+         pesFilterParams.pes_type = DMX_PES_AUDIO;
+         pesFilterParams.flags   = DMX_IMMEDIATE_START;
+         if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
+             perror("set_apid");
+             return -1;
+         }
+
+         pesFilterParams.pid     = tpid;
+         pesFilterParams.input   = DMX_IN_FRONTEND;
+         pesFilterParams.output  = DMX_OUT_DECODER;
+         pesFilterParams.pes_type = DMX_PES_TELETEXT;
+         pesFilterParams.flags   = DMX_IMMEDIATE_START;
+         if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
+             perror("set_tpid");
+             return -1;
+         }
+
+         return has_signal(fds);
+     }
+
+The program assumes that you are using a universal LNB and a standard
+DiSEqC switch with up to 4 addresses. Of course, you could build in some
+more checking if tuning was successful and maybe try to repeat the
+tuning process. Depending on the external hardware, i.e. LNB and DiSEqC
+switch, and weather conditions this may be necessary.
+
+
+.. _the_dvr_device:
+
+The DVR device
+==============
+
+The following program code shows how to use the DVR device for
+recording.
+
+
+.. code-block:: c
+
+     #include <sys/ioctl.h>
+     #include <stdio.h>
+     #include <stdint.h>
+     #include <sys/types.h>
+     #include <sys/stat.h>
+     #include <fcntl.h>
+     #include <time.h>
+     #include <unistd.h>
+
+     #include <linux/dvb/dmx.h>
+     #include <linux/dvb/video.h>
+     #include <sys/poll.h>
+     #define DVR "/dev/dvb/adapter0/dvr1"
+     #define AUDIO "/dev/dvb/adapter0/audio1"
+     #define VIDEO "/dev/dvb/adapter0/video1"
+
+     #define BUFFY (188*20)
+     #define MAX_LENGTH (1024*1024*5) /* record 5MB */
+
+
+     /* switch the demuxes to recording, assuming the transponder is tuned */
+
+     /* demux1, demux2: file descriptor of video and audio filters */
+     /* vpid, apid:     PIDs of video and audio channels           */
+
+     int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid)
+     {
+         struct dmx_pes_filter_params pesFilterParams;
+
+         if (demux1 < 0){
+             if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
+                 < 0){
+                 perror("DEMUX DEVICE: ");
+                 return -1;
+             }
+         }
+
+         if (demux2 < 0){
+             if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
+                 < 0){
+                 perror("DEMUX DEVICE: ");
+                 return -1;
+             }
+         }
+
+         pesFilterParams.pid = vpid;
+         pesFilterParams.input = DMX_IN_FRONTEND;
+         pesFilterParams.output = DMX_OUT_TS_TAP;
+         pesFilterParams.pes_type = DMX_PES_VIDEO;
+         pesFilterParams.flags = DMX_IMMEDIATE_START;
+         if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
+             perror("DEMUX DEVICE");
+             return -1;
+         }
+         pesFilterParams.pid = apid;
+         pesFilterParams.input = DMX_IN_FRONTEND;
+         pesFilterParams.output = DMX_OUT_TS_TAP;
+         pesFilterParams.pes_type = DMX_PES_AUDIO;
+         pesFilterParams.flags = DMX_IMMEDIATE_START;
+         if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
+             perror("DEMUX DEVICE");
+             return -1;
+         }
+         return 0;
+     }
+
+     /* start recording MAX_LENGTH , assuming the transponder is tuned */
+
+     /* demux1, demux2: file descriptor of video and audio filters */
+     /* vpid, apid:     PIDs of video and audio channels           */
+     int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid)
+     {
+         int i;
+         int len;
+         int written;
+         uint8_t buf[BUFFY];
+         uint64_t length;
+         struct pollfd pfd[1];
+         int dvr, dvr_out;
+
+         /* open dvr device */
+         if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){
+                 perror("DVR DEVICE");
+                 return -1;
+         }
+
+         /* switch video and audio demuxes to dvr */
+         printf ("Switching dvr on\\n");
+         i = switch_to_record(demux1, demux2, vpid, apid);
+         printf("finished: ");
+
+         printf("Recording %2.0f MB of test file in TS format\\n",
+            MAX_LENGTH/(1024.0*1024.0));
+         length = 0;
+
+         /* open output file */
+         if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT
+                      |O_TRUNC, S_IRUSR|S_IWUSR
+                      |S_IRGRP|S_IWGRP|S_IROTH|
+                      S_IWOTH)) < 0){
+             perror("Can't open file for dvr test");
+             return -1;
+         }
+
+         pfd[0].fd = dvr;
+         pfd[0].events = POLLIN;
+
+         /* poll for dvr data and write to file */
+         while (length < MAX_LENGTH ) {
+             if (poll(pfd,1,1)){
+                 if (pfd[0].revents & POLLIN){
+                     len = read(dvr, buf, BUFFY);
+                     if (len < 0){
+                         perror("recording");
+                         return -1;
+                     }
+                     if (len > 0){
+                         written = 0;
+                         while (written < len)
+                             written +=
+                                 write (dvr_out,
+                                    buf, len);
+                         length += len;
+                         printf("written %2.0f MB\\r",
+                            length/1024./1024.);
+                     }
+                 }
+             }
+         }
+         return 0;
+     }
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-bandwidth-t.rst b/Documentation/linux_tv/media/dvb/fe-bandwidth-t.rst
new file mode 100644
index 0000000..c6e56ab
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-bandwidth-t.rst
@@ -0,0 +1,88 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _fe-bandwidth-t:
+
+******************
+Frontend bandwidth
+******************
+
+
+.. _fe-bandwidth:
+
+.. flat-table:: enum fe_bandwidth
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`BANDWIDTH-AUTO`:
+
+          ``BANDWIDTH_AUTO``
+
+       -  Autodetect bandwidth (if supported)
+
+    -  .. row 3
+
+       -  .. _`BANDWIDTH-1-712-MHZ`:
+
+          ``BANDWIDTH_1_712_MHZ``
+
+       -  1.712 MHz
+
+    -  .. row 4
+
+       -  .. _`BANDWIDTH-5-MHZ`:
+
+          ``BANDWIDTH_5_MHZ``
+
+       -  5 MHz
+
+    -  .. row 5
+
+       -  .. _`BANDWIDTH-6-MHZ`:
+
+          ``BANDWIDTH_6_MHZ``
+
+       -  6 MHz
+
+    -  .. row 6
+
+       -  .. _`BANDWIDTH-7-MHZ`:
+
+          ``BANDWIDTH_7_MHZ``
+
+       -  7 MHz
+
+    -  .. row 7
+
+       -  .. _`BANDWIDTH-8-MHZ`:
+
+          ``BANDWIDTH_8_MHZ``
+
+       -  8 MHz
+
+    -  .. row 8
+
+       -  .. _`BANDWIDTH-10-MHZ`:
+
+          ``BANDWIDTH_10_MHZ``
+
+       -  10 MHz
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/linux_tv/media/dvb/fe-diseqc-recv-slave-reply.rst
new file mode 100644
index 0000000..309930f
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-diseqc-recv-slave-reply.rst
@@ -0,0 +1,88 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_DISEQC_RECV_SLAVE_REPLY:
+
+********************************
+ioctl FE_DISEQC_RECV_SLAVE_REPLY
+********************************
+
+*man FE_DISEQC_RECV_SLAVE_REPLY(2)*
+
+Receives reply from a DiSEqC 2.0 command
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, struct dvb_diseqc_slave_reply *argp )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_DISEQC_RECV_SLAVE_REPLY
+
+``argp``
+    pointer to struct
+    :ref:`dvb_diseqc_slave_reply <dvb-diseqc-slave-reply>`
+
+
+Description
+===========
+
+Receives reply from a DiSEqC 2.0 command.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _dvb-diseqc-slave-reply:
+
+.. flat-table:: struct dvb_diseqc_slave_reply
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+
+    -  .. row 1
+
+       -  uint8_t
+
+       -  msg[4]
+
+       -  DiSEqC message (framing, data[3])
+
+    -  .. row 2
+
+       -  uint8_t
+
+       -  msg_len
+
+       -  Length of the DiSEqC message. Valid values are 0 to 4, where 0
+          means no msg
+
+    -  .. row 3
+
+       -  int
+
+       -  timeout
+
+       -  Return from ioctl after timeout ms with errorcode when no message
+          was received
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-diseqc-reset-overload.rst b/Documentation/linux_tv/media/dvb/fe-diseqc-reset-overload.rst
new file mode 100644
index 0000000..dc7ae1a
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-diseqc-reset-overload.rst
@@ -0,0 +1,51 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_DISEQC_RESET_OVERLOAD:
+
+******************************
+ioctl FE_DISEQC_RESET_OVERLOAD
+******************************
+
+*man FE_DISEQC_RESET_OVERLOAD(2)*
+
+Restores the power to the antenna subsystem, if it was powered off due
+to power overload.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, NULL )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_DISEQC_RESET_OVERLOAD
+
+
+Description
+===========
+
+If the bus has been automatically powered off due to power overload,
+this ioctl call restores the power to the bus. The call requires
+read/write access to the device. This call has no effect if the device
+is manually powered off. Not all DVB adapters support this ioctl.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-diseqc-send-burst.rst b/Documentation/linux_tv/media/dvb/fe-diseqc-send-burst.rst
new file mode 100644
index 0000000..34c7879
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-diseqc-send-burst.rst
@@ -0,0 +1,93 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_DISEQC_SEND_BURST:
+
+**************************
+ioctl FE_DISEQC_SEND_BURST
+**************************
+
+*man FE_DISEQC_SEND_BURST(2)*
+
+Sends a 22KHz tone burst for 2x1 mini DiSEqC satellite selection.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, enum fe_sec_mini_cmd *tone )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_DISEQC_SEND_BURST
+
+``tone``
+    pointer to enum :ref:`fe_sec_mini_cmd <fe-sec-mini-cmd>`
+
+
+Description
+===========
+
+This ioctl is used to set the generation of a 22kHz tone burst for mini
+DiSEqC satellite selection for 2x1 switches. This call requires
+read/write permissions.
+
+It provides support for what's specified at
+`Digital Satellite Equipment Control (DiSEqC) - Simple "ToneBurst" Detection Circuit specification. <http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/simple_tone_burst_detec.pdf>`__
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _fe-sec-mini-cmd-t:
+
+enum fe_sec_mini_cmd
+====================
+
+
+.. _fe-sec-mini-cmd:
+
+.. flat-table:: enum fe_sec_mini_cmd
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`SEC-MINI-A`:
+
+          ``SEC_MINI_A``
+
+       -  Sends a mini-DiSEqC 22kHz '0' Tone Burst to select satellite-A
+
+    -  .. row 3
+
+       -  .. _`SEC-MINI-B`:
+
+          ``SEC_MINI_B``
+
+       -  Sends a mini-DiSEqC 22kHz '1' Data Burst to select satellite-B
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/linux_tv/media/dvb/fe-diseqc-send-master-cmd.rst
new file mode 100644
index 0000000..974a45f
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-diseqc-send-master-cmd.rst
@@ -0,0 +1,78 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_DISEQC_SEND_MASTER_CMD:
+
+*******************************
+ioctl FE_DISEQC_SEND_MASTER_CMD
+*******************************
+
+*man FE_DISEQC_SEND_MASTER_CMD(2)*
+
+Sends a DiSEqC command
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, struct dvb_diseqc_master_cmd *argp )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_DISEQC_SEND_MASTER_CMD
+
+``argp``
+    pointer to struct
+    :ref:`dvb_diseqc_master_cmd <dvb-diseqc-master-cmd>`
+
+
+Description
+===========
+
+Sends a DiSEqC command to the antenna subsystem.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _dvb-diseqc-master-cmd:
+
+.. flat-table:: struct dvb_diseqc_master_cmd
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+
+    -  .. row 1
+
+       -  uint8_t
+
+       -  msg[6]
+
+       -  DiSEqC message (framing, address, command, data[3])
+
+    -  .. row 2
+
+       -  uint8_t
+
+       -  msg_len
+
+       -  Length of the DiSEqC message. Valid values are 3 to 6
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/linux_tv/media/dvb/fe-enable-high-lnb-voltage.rst
new file mode 100644
index 0000000..207c65a
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-enable-high-lnb-voltage.rst
@@ -0,0 +1,58 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_ENABLE_HIGH_LNB_VOLTAGE:
+
+********************************
+ioctl FE_ENABLE_HIGH_LNB_VOLTAGE
+********************************
+
+*man FE_ENABLE_HIGH_LNB_VOLTAGE(2)*
+
+Select output DC level between normal LNBf voltages or higher LNBf
+voltages.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, unsigned int high )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_ENABLE_HIGH_LNB_VOLTAGE
+
+``high``
+    Valid flags:
+
+    -  0 - normal 13V and 18V.
+
+    -  >0 - enables slightly higher voltages instead of 13/18V, in order
+       to compensate for long antenna cables.
+
+
+Description
+===========
+
+Select output DC level between normal LNBf voltages or higher LNBf
+voltages between 0 (normal) or a value grater than 0 for higher
+voltages.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-get-info.rst b/Documentation/linux_tv/media/dvb/fe-get-info.rst
new file mode 100644
index 0000000..5ac74c2
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-get-info.rst
@@ -0,0 +1,434 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_GET_INFO:
+
+*****************
+ioctl FE_GET_INFO
+*****************
+
+*man FE_GET_INFO(2)*
+
+Query DVB frontend capabilities and returns information about the
+front-end. This call only requires read-only access to the device
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, struct dvb_frontend_info *argp )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_GET_INFO
+
+``argp``
+    pointer to struct struct
+    :ref:`dvb_frontend_info <dvb-frontend-info>`
+
+
+Description
+===========
+
+All DVB frontend devices support the ``FE_GET_INFO`` ioctl. It is used
+to identify kernel devices compatible with this specification and to
+obtain information about driver and hardware capabilities. The ioctl
+takes a pointer to dvb_frontend_info which is filled by the driver.
+When the driver is not compatible with this specification the ioctl
+returns an error.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _dvb-frontend-info:
+
+.. flat-table:: struct dvb_frontend_info
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+
+    -  .. row 1
+
+       -  char
+
+       -  name[128]
+
+       -  Name of the frontend
+
+    -  .. row 2
+
+       -  fe_type_t
+
+       -  type
+
+       -  **DEPRECATED**. DVBv3 type. Should not be used on modern programs,
+          as a frontend may have more than one type. So, the DVBv5 API
+          should be used instead to enumerate and select the frontend type.
+
+    -  .. row 3
+
+       -  uint32_t
+
+       -  frequency_min
+
+       -  Minimal frequency supported by the frontend
+
+    -  .. row 4
+
+       -  uint32_t
+
+       -  frequency_max
+
+       -  Maximal frequency supported by the frontend
+
+    -  .. row 5
+
+       -  uint32_t
+
+       -  frequency_stepsize
+
+       -  Frequency step - all frequencies are multiple of this value
+
+    -  .. row 6
+
+       -  uint32_t
+
+       -  frequency_tolerance
+
+       -  Tolerance of the frequency
+
+    -  .. row 7
+
+       -  uint32_t
+
+       -  symbol_rate_min
+
+       -  Minimal symbol rate (for Cable/Satellite systems), in bauds
+
+    -  .. row 8
+
+       -  uint32_t
+
+       -  symbol_rate_max
+
+       -  Maximal symbol rate (for Cable/Satellite systems), in bauds
+
+    -  .. row 9
+
+       -  uint32_t
+
+       -  symbol_rate_tolerance
+
+       -  Maximal symbol rate tolerance, in ppm
+
+    -  .. row 10
+
+       -  uint32_t
+
+       -  notifier_delay
+
+       -  **DEPRECATED**. Not used by any driver.
+
+    -  .. row 11
+
+       -  enum :ref:`fe_caps <fe-caps>`
+
+       -  caps
+
+       -  Capabilities supported by the frontend
+
+
+NOTE: The frequencies are specified in Hz for Terrestrial and Cable
+systems. They're specified in kHz for Satellite systems
+
+
+.. _fe-caps-t:
+
+frontend capabilities
+=====================
+
+Capabilities describe what a frontend can do. Some capabilities are
+supported only on some specific frontend types.
+
+
+.. _fe-caps:
+
+.. flat-table:: enum fe_caps
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`FE-IS-STUPID`:
+
+          ``FE_IS_STUPID``
+
+       -  There's something wrong at the frontend, and it can't report its
+          capabilities
+
+    -  .. row 3
+
+       -  .. _`FE-CAN-INVERSION-AUTO`:
+
+          ``FE_CAN_INVERSION_AUTO``
+
+       -  The frontend is capable of auto-detecting inversion
+
+    -  .. row 4
+
+       -  .. _`FE-CAN-FEC-1-2`:
+
+          ``FE_CAN_FEC_1_2``
+
+       -  The frontend supports FEC 1/2
+
+    -  .. row 5
+
+       -  .. _`FE-CAN-FEC-2-3`:
+
+          ``FE_CAN_FEC_2_3``
+
+       -  The frontend supports FEC 2/3
+
+    -  .. row 6
+
+       -  .. _`FE-CAN-FEC-3-4`:
+
+          ``FE_CAN_FEC_3_4``
+
+       -  The frontend supports FEC 3/4
+
+    -  .. row 7
+
+       -  .. _`FE-CAN-FEC-4-5`:
+
+          ``FE_CAN_FEC_4_5``
+
+       -  The frontend supports FEC 4/5
+
+    -  .. row 8
+
+       -  .. _`FE-CAN-FEC-5-6`:
+
+          ``FE_CAN_FEC_5_6``
+
+       -  The frontend supports FEC 5/6
+
+    -  .. row 9
+
+       -  .. _`FE-CAN-FEC-6-7`:
+
+          ``FE_CAN_FEC_6_7``
+
+       -  The frontend supports FEC 6/7
+
+    -  .. row 10
+
+       -  .. _`FE-CAN-FEC-7-8`:
+
+          ``FE_CAN_FEC_7_8``
+
+       -  The frontend supports FEC 7/8
+
+    -  .. row 11
+
+       -  .. _`FE-CAN-FEC-8-9`:
+
+          ``FE_CAN_FEC_8_9``
+
+       -  The frontend supports FEC 8/9
+
+    -  .. row 12
+
+       -  .. _`FE-CAN-FEC-AUTO`:
+
+          ``FE_CAN_FEC_AUTO``
+
+       -  The frontend can autodetect FEC.
+
+    -  .. row 13
+
+       -  .. _`FE-CAN-QPSK`:
+
+          ``FE_CAN_QPSK``
+
+       -  The frontend supports QPSK modulation
+
+    -  .. row 14
+
+       -  .. _`FE-CAN-QAM-16`:
+
+          ``FE_CAN_QAM_16``
+
+       -  The frontend supports 16-QAM modulation
+
+    -  .. row 15
+
+       -  .. _`FE-CAN-QAM-32`:
+
+          ``FE_CAN_QAM_32``
+
+       -  The frontend supports 32-QAM modulation
+
+    -  .. row 16
+
+       -  .. _`FE-CAN-QAM-64`:
+
+          ``FE_CAN_QAM_64``
+
+       -  The frontend supports 64-QAM modulation
+
+    -  .. row 17
+
+       -  .. _`FE-CAN-QAM-128`:
+
+          ``FE_CAN_QAM_128``
+
+       -  The frontend supports 128-QAM modulation
+
+    -  .. row 18
+
+       -  .. _`FE-CAN-QAM-256`:
+
+          ``FE_CAN_QAM_256``
+
+       -  The frontend supports 256-QAM modulation
+
+    -  .. row 19
+
+       -  .. _`FE-CAN-QAM-AUTO`:
+
+          ``FE_CAN_QAM_AUTO``
+
+       -  The frontend can autodetect modulation
+
+    -  .. row 20
+
+       -  .. _`FE-CAN-TRANSMISSION-MODE-AUTO`:
+
+          ``FE_CAN_TRANSMISSION_MODE_AUTO``
+
+       -  The frontend can autodetect the transmission mode
+
+    -  .. row 21
+
+       -  .. _`FE-CAN-BANDWIDTH-AUTO`:
+
+          ``FE_CAN_BANDWIDTH_AUTO``
+
+       -  The frontend can autodetect the bandwidth
+
+    -  .. row 22
+
+       -  .. _`FE-CAN-GUARD-INTERVAL-AUTO`:
+
+          ``FE_CAN_GUARD_INTERVAL_AUTO``
+
+       -  The frontend can autodetect the guard interval
+
+    -  .. row 23
+
+       -  .. _`FE-CAN-HIERARCHY-AUTO`:
+
+          ``FE_CAN_HIERARCHY_AUTO``
+
+       -  The frontend can autodetect hierarch
+
+    -  .. row 24
+
+       -  .. _`FE-CAN-8VSB`:
+
+          ``FE_CAN_8VSB``
+
+       -  The frontend supports 8-VSB modulation
+
+    -  .. row 25
+
+       -  .. _`FE-CAN-16VSB`:
+
+          ``FE_CAN_16VSB``
+
+       -  The frontend supports 16-VSB modulation
+
+    -  .. row 26
+
+       -  .. _`FE-HAS-EXTENDED-CAPS`:
+
+          ``FE_HAS_EXTENDED_CAPS``
+
+       -  Currently, unused
+
+    -  .. row 27
+
+       -  .. _`FE-CAN-MULTISTREAM`:
+
+          ``FE_CAN_MULTISTREAM``
+
+       -  The frontend supports multistream filtering
+
+    -  .. row 28
+
+       -  .. _`FE-CAN-TURBO-FEC`:
+
+          ``FE_CAN_TURBO_FEC``
+
+       -  The frontend supports turbo FEC modulation
+
+    -  .. row 29
+
+       -  .. _`FE-CAN-2G-MODULATION`:
+
+          ``FE_CAN_2G_MODULATION``
+
+       -  The frontend supports "2nd generation modulation" (DVB-S2/T2)>
+
+    -  .. row 30
+
+       -  .. _`FE-NEEDS-BENDING`:
+
+          ``FE_NEEDS_BENDING``
+
+       -  Not supported anymore, don't use it
+
+    -  .. row 31
+
+       -  .. _`FE-CAN-RECOVER`:
+
+          ``FE_CAN_RECOVER``
+
+       -  The frontend can recover from a cable unplug automatically
+
+    -  .. row 32
+
+       -  .. _`FE-CAN-MUTE-TS`:
+
+          ``FE_CAN_MUTE_TS``
+
+       -  The frontend can stop spurious TS data output
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-get-property.rst b/Documentation/linux_tv/media/dvb/fe-get-property.rst
new file mode 100644
index 0000000..8a6c5de
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-get-property.rst
@@ -0,0 +1,75 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_GET_PROPERTY:
+
+**************************************
+ioctl FE_SET_PROPERTY, FE_GET_PROPERTY
+**************************************
+
+*man FE_SET_PROPERTY(2)*
+
+FE_GET_PROPERTY
+FE_SET_PROPERTY sets one or more frontend properties.
+FE_GET_PROPERTY returns one or more frontend properties.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, struct dtv_properties *argp )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_SET_PROPERTY, FE_GET_PROPERTY
+
+``argp``
+    pointer to struct :ref:`dtv_properties <dtv-properties>`
+
+
+Description
+===========
+
+All DVB frontend devices support the ``FE_SET_PROPERTY`` and
+``FE_GET_PROPERTY`` ioctls. The supported properties and statistics
+depends on the delivery system and on the device:
+
+-  ``FE_SET_PROPERTY:``
+
+   -  This ioctl is used to set one or more frontend properties.
+
+   -  This is the basic command to request the frontend to tune into
+      some frequency and to start decoding the digital TV signal.
+
+   -  This call requires read/write access to the device.
+
+   -  At return, the values are updated to reflect the actual parameters
+      used.
+
+-  ``FE_GET_PROPERTY:``
+
+   -  This ioctl is used to get properties and statistics from the
+      frontend.
+
+   -  No properties are changed, and statistics aren't reset.
+
+   -  This call only requires read-only access to the device.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-read-status.rst b/Documentation/linux_tv/media/dvb/fe-read-status.rst
new file mode 100644
index 0000000..41396a8
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-read-status.rst
@@ -0,0 +1,143 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_READ_STATUS:
+
+********************
+ioctl FE_READ_STATUS
+********************
+
+*man FE_READ_STATUS(2)*
+
+Returns status information about the front-end. This call only requires
+read-only access to the device
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, unsigned int *status )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_READ_STATUS
+
+``status``
+    pointer to a bitmask integer filled with the values defined by enum
+    :ref:`fe_status <fe-status>`.
+
+
+Description
+===========
+
+All DVB frontend devices support the ``FE_READ_STATUS`` ioctl. It is
+used to check about the locking status of the frontend after being
+tuned. The ioctl takes a pointer to an integer where the status will be
+written.
+
+NOTE: the size of status is actually sizeof(enum fe_status), with
+varies according with the architecture. This needs to be fixed in the
+future.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _fe-status-t:
+
+int fe_status
+=============
+
+The fe_status parameter is used to indicate the current state and/or
+state changes of the frontend hardware. It is produced using the enum
+:ref:`fe_status <fe-status>` values on a bitmask
+
+
+.. _fe-status:
+
+.. flat-table:: enum fe_status
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`FE-HAS-SIGNAL`:
+
+          ``FE_HAS_SIGNAL``
+
+       -  The frontend has found something above the noise level
+
+    -  .. row 3
+
+       -  .. _`FE-HAS-CARRIER`:
+
+          ``FE_HAS_CARRIER``
+
+       -  The frontend has found a DVB signal
+
+    -  .. row 4
+
+       -  .. _`FE-HAS-VITERBI`:
+
+          ``FE_HAS_VITERBI``
+
+       -  The frontend FEC inner coding (Viterbi, LDPC or other inner code)
+          is stable
+
+    -  .. row 5
+
+       -  .. _`FE-HAS-SYNC`:
+
+          ``FE_HAS_SYNC``
+
+       -  Synchronization bytes was found
+
+    -  .. row 6
+
+       -  .. _`FE-HAS-LOCK`:
+
+          ``FE_HAS_LOCK``
+
+       -  The DVB were locked and everything is working
+
+    -  .. row 7
+
+       -  .. _`FE-TIMEDOUT`:
+
+          ``FE_TIMEDOUT``
+
+       -  no lock within the last about 2 seconds
+
+    -  .. row 8
+
+       -  .. _`FE-REINIT`:
+
+          ``FE_REINIT``
+
+       -  The frontend was reinitialized, application is recommended to
+          reset DiSEqC, tone and parameters
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-set-frontend-tune-mode.rst b/Documentation/linux_tv/media/dvb/fe-set-frontend-tune-mode.rst
new file mode 100644
index 0000000..1167d22
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-set-frontend-tune-mode.rst
@@ -0,0 +1,60 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_SET_FRONTEND_TUNE_MODE:
+
+*******************************
+ioctl FE_SET_FRONTEND_TUNE_MODE
+*******************************
+
+*man FE_SET_FRONTEND_TUNE_MODE(2)*
+
+Allow setting tuner mode flags to the frontend.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, unsigned int flags )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_SET_FRONTEND_TUNE_MODE
+
+``flags``
+    Valid flags:
+
+    -  0 - normal tune mode
+
+    -  FE_TUNE_MODE_ONESHOT - When set, this flag will disable any
+       zigzagging or other "normal" tuning behaviour. Additionally,
+       there will be no automatic monitoring of the lock status, and
+       hence no frontend events will be generated. If a frontend device
+       is closed, this flag will be automatically turned off when the
+       device is reopened read-write.
+
+
+Description
+===========
+
+Allow setting tuner mode flags to the frontend, between 0 (normal) or
+FE_TUNE_MODE_ONESHOT mode
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-set-tone.rst b/Documentation/linux_tv/media/dvb/fe-set-tone.rst
new file mode 100644
index 0000000..f98c4b3
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-set-tone.rst
@@ -0,0 +1,100 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_SET_TONE:
+
+*****************
+ioctl FE_SET_TONE
+*****************
+
+*man FE_SET_TONE(2)*
+
+Sets/resets the generation of the continuous 22kHz tone.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, enum fe_sec_tone_mode *tone )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_SET_TONE
+
+``tone``
+    pointer to enum :ref:`fe_sec_tone_mode <fe-sec-tone-mode>`
+
+
+Description
+===========
+
+This ioctl is used to set the generation of the continuous 22kHz tone.
+This call requires read/write permissions.
+
+Usually, satellite antenna subsystems require that the digital TV device
+to send a 22kHz tone in order to select between high/low band on some
+dual-band LNBf. It is also used to send signals to DiSEqC equipment, but
+this is done using the DiSEqC ioctls.
+
+NOTE: if more than one device is connected to the same antenna, setting
+a tone may interfere on other devices, as they may lose the capability
+of selecting the band. So, it is recommended that applications would
+change to SEC_TONE_OFF when the device is not used.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _fe-sec-tone-mode-t:
+
+enum fe_sec_tone_mode
+=====================
+
+
+.. _fe-sec-tone-mode:
+
+.. flat-table:: enum fe_sec_tone_mode
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`SEC-TONE-ON`:
+
+          ``SEC_TONE_ON``
+
+       -  Sends a 22kHz tone burst to the antenna
+
+    -  .. row 3
+
+       -  .. _`SEC-TONE-OFF`:
+
+          ``SEC_TONE_OFF``
+
+       -  Don't send a 22kHz tone to the antenna (except if the
+          FE_DISEQC_* ioctls are called)
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-set-voltage.rst b/Documentation/linux_tv/media/dvb/fe-set-voltage.rst
new file mode 100644
index 0000000..eb4ab28
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-set-voltage.rst
@@ -0,0 +1,68 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_SET_VOLTAGE:
+
+********************
+ioctl FE_SET_VOLTAGE
+********************
+
+*man FE_SET_VOLTAGE(2)*
+
+Allow setting the DC level sent to the antenna subsystem.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, enum fe_sec_voltage *voltage )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_SET_VOLTAGE
+
+``voltage``
+    pointer to enum :ref:`fe_sec_voltage <fe-sec-voltage>`
+
+    Valid values are described at enum
+    :ref:`fe_sec_voltage <fe-sec-voltage>`.
+
+
+Description
+===========
+
+This ioctl allows to set the DC voltage level sent through the antenna
+cable to 13V, 18V or off.
+
+Usually, a satellite antenna subsystems require that the digital TV
+device to send a DC voltage to feed power to the LNBf. Depending on the
+LNBf type, the polarization or the intermediate frequency (IF) of the
+LNBf can controlled by the voltage level. Other devices (for example,
+the ones that implement DISEqC and multipoint LNBf's don't need to
+control the voltage level, provided that either 13V or 18V is sent to
+power up the LNBf.
+
+NOTE: if more than one device is connected to the same antenna, setting
+a voltage level may interfere on other devices, as they may lose the
+capability of setting polarization or IF. So, on those cases, setting
+the voltage to SEC_VOLTAGE_OFF while the device is not is used is
+recommended.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe-type-t.rst b/Documentation/linux_tv/media/dvb/fe-type-t.rst
new file mode 100644
index 0000000..49fa809
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe-type-t.rst
@@ -0,0 +1,100 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _fe-type-t:
+
+*************
+Frontend type
+*************
+
+For historical reasons, frontend types are named by the type of
+modulation used in transmission. The fontend types are given by
+fe_type_t type, defined as:
+
+
+.. _fe-type:
+
+.. flat-table:: Frontend types
+    :header-rows:  1
+    :stub-columns: 0
+    :widths:       3 1 4
+
+
+    -  .. row 1
+
+       -  fe_type
+
+       -  Description
+
+       -  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` equivalent
+          type
+
+    -  .. row 2
+
+       -  .. _`FE-QPSK`:
+
+          ``FE_QPSK``
+
+       -  For DVB-S standard
+
+       -  ``SYS_DVBS``
+
+    -  .. row 3
+
+       -  .. _`FE-QAM`:
+
+          ``FE_QAM``
+
+       -  For DVB-C annex A standard
+
+       -  ``SYS_DVBC_ANNEX_A``
+
+    -  .. row 4
+
+       -  .. _`FE-OFDM`:
+
+          ``FE_OFDM``
+
+       -  For DVB-T standard
+
+       -  ``SYS_DVBT``
+
+    -  .. row 5
+
+       -  .. _`FE-ATSC`:
+
+          ``FE_ATSC``
+
+       -  For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used
+          in US.
+
+       -  ``SYS_ATSC`` (terrestrial) or ``SYS_DVBC_ANNEX_B`` (cable)
+
+
+Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described
+at the above, as they're supported via the new
+:ref:`FE_GET_PROPERTY/FE_GET_SET_PROPERTY <FE_GET_PROPERTY>`
+ioctl's, using the :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+parameter.
+
+In the old days, struct :ref:`dvb_frontend_info <dvb-frontend-info>`
+used to contain ``fe_type_t`` field to indicate the delivery systems,
+filled with either FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC. While this
+is still filled to keep backward compatibility, the usage of this field
+is deprecated, as it can report just one delivery system, but some
+devices support multiple delivery systems. Please use
+:ref:`DTV_ENUM_DELSYS <DTV-ENUM-DELSYS>` instead.
+
+On devices that support multiple delivery systems, struct
+:ref:`dvb_frontend_info <dvb-frontend-info>`::``fe_type_t`` is
+filled with the currently standard, as selected by the last call to
+:ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` using the
+:ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` property.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/fe_property_parameters.rst b/Documentation/linux_tv/media/dvb/fe_property_parameters.rst
new file mode 100644
index 0000000..cf8514d
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/fe_property_parameters.rst
@@ -0,0 +1,1976 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _fe_property_parameters:
+
+******************************
+Digital TV property parameters
+******************************
+
+
+.. _DTV-UNDEFINED:
+
+DTV_UNDEFINED
+=============
+
+Used internally. A GET/SET operation for it won't change or return
+anything.
+
+
+.. _DTV-TUNE:
+
+DTV_TUNE
+========
+
+Interpret the cache of data, build either a traditional frontend
+tunerequest so we can pass validation in the ``FE_SET_FRONTEND`` ioctl.
+
+
+.. _DTV-CLEAR:
+
+DTV_CLEAR
+=========
+
+Reset a cache of data specific to the frontend here. This does not
+effect hardware.
+
+
+.. _DTV-FREQUENCY:
+
+DTV_FREQUENCY
+=============
+
+Central frequency of the channel.
+
+Notes:
+
+1)For satellite delivery systems, it is measured in kHz. For the other
+ones, it is measured in Hz.
+
+2)For ISDB-T, the channels are usually transmitted with an offset of
+143kHz. E.g. a valid frequency could be 474143 kHz. The stepping is
+bound to the bandwidth of the channel which is 6MHz.
+
+3)As in ISDB-Tsb the channel consists of only one or three segments the
+frequency step is 429kHz, 3*429 respectively. As for ISDB-T the central
+frequency of the channel is expected.
+
+
+.. _DTV-MODULATION:
+
+DTV_MODULATION
+==============
+
+Specifies the frontend modulation type for delivery systems that
+supports more than one modulation type. The modulation can be one of the
+types defined by enum :ref:`fe_modulation <fe-modulation>`.
+
+
+.. _fe-modulation-t:
+
+Modulation property
+-------------------
+
+Most of the digital TV standards currently offers more than one possible
+modulation (sometimes called as "constellation" on some standards). This
+enum contains the values used by the Kernel. Please note that not all
+modulations are supported by a given standard.
+
+
+.. _fe-modulation:
+
+.. flat-table:: enum fe_modulation
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`QPSK`:
+
+          ``QPSK``
+
+       -  QPSK modulation
+
+    -  .. row 3
+
+       -  .. _`QAM-16`:
+
+          ``QAM_16``
+
+       -  16-QAM modulation
+
+    -  .. row 4
+
+       -  .. _`QAM-32`:
+
+          ``QAM_32``
+
+       -  32-QAM modulation
+
+    -  .. row 5
+
+       -  .. _`QAM-64`:
+
+          ``QAM_64``
+
+       -  64-QAM modulation
+
+    -  .. row 6
+
+       -  .. _`QAM-128`:
+
+          ``QAM_128``
+
+       -  128-QAM modulation
+
+    -  .. row 7
+
+       -  .. _`QAM-256`:
+
+          ``QAM_256``
+
+       -  256-QAM modulation
+
+    -  .. row 8
+
+       -  .. _`QAM-AUTO`:
+
+          ``QAM_AUTO``
+
+       -  Autodetect QAM modulation
+
+    -  .. row 9
+
+       -  .. _`VSB-8`:
+
+          ``VSB_8``
+
+       -  8-VSB modulation
+
+    -  .. row 10
+
+       -  .. _`VSB-16`:
+
+          ``VSB_16``
+
+       -  16-VSB modulation
+
+    -  .. row 11
+
+       -  .. _`PSK-8`:
+
+          ``PSK_8``
+
+       -  8-PSK modulation
+
+    -  .. row 12
+
+       -  .. _`APSK-16`:
+
+          ``APSK_16``
+
+       -  16-APSK modulation
+
+    -  .. row 13
+
+       -  .. _`APSK-32`:
+
+          ``APSK_32``
+
+       -  32-APSK modulation
+
+    -  .. row 14
+
+       -  .. _`DQPSK`:
+
+          ``DQPSK``
+
+       -  DQPSK modulation
+
+    -  .. row 15
+
+       -  .. _`QAM-4-NR`:
+
+          ``QAM_4_NR``
+
+       -  4-QAM-NR modulation
+
+
+
+.. _DTV-BANDWIDTH-HZ:
+
+DTV_BANDWIDTH_HZ
+================
+
+Bandwidth for the channel, in HZ.
+
+Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``,
+``8000000``, ``10000000``.
+
+Notes:
+
+1) For ISDB-T it should be always 6000000Hz (6MHz)
+
+2) For ISDB-Tsb it can vary depending on the number of connected
+segments
+
+3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth for
+DVB-C depends on the symbol rate
+
+4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
+other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
+DTV_ISDBT_SB_SEGMENT_COUNT).
+
+5) DVB-T supports 6, 7 and 8MHz.
+
+6) In addition, DVB-T2 supports 1.172, 5 and 10MHz.
+
+
+.. _DTV-INVERSION:
+
+DTV_INVERSION
+=============
+
+Specifies if the frontend should do spectral inversion or not.
+
+
+.. _fe-spectral-inversion-t:
+
+enum fe_modulation: Frontend spectral inversion
+-----------------------------------------------
+
+This parameter indicates if spectral inversion should be presumed or
+not. In the automatic setting (``INVERSION_AUTO``) the hardware will try
+to figure out the correct setting by itself. If the hardware doesn't
+support, the DVB core will try to lock at the carrier first with
+inversion off. If it fails, it will try to enable inversion.
+
+
+.. _fe-spectral-inversion:
+
+.. flat-table:: enum fe_modulation
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`INVERSION-OFF`:
+
+          ``INVERSION_OFF``
+
+       -  Don't do spectral band inversion.
+
+    -  .. row 3
+
+       -  .. _`INVERSION-ON`:
+
+          ``INVERSION_ON``
+
+       -  Do spectral band inversion.
+
+    -  .. row 4
+
+       -  .. _`INVERSION-AUTO`:
+
+          ``INVERSION_AUTO``
+
+       -  Autodetect spectral band inversion.
+
+
+
+.. _DTV-DISEQC-MASTER:
+
+DTV_DISEQC_MASTER
+=================
+
+Currently not implemented.
+
+
+.. _DTV-SYMBOL-RATE:
+
+DTV_SYMBOL_RATE
+===============
+
+Digital TV symbol rate, in bauds (symbols/second). Used on cable
+standards.
+
+
+.. _DTV-INNER-FEC:
+
+DTV_INNER_FEC
+=============
+
+Used cable/satellite transmissions. The acceptable values are:
+
+
+.. _fe-code-rate-t:
+
+enum fe_code_rate: type of the Forward Error Correction.
+--------------------------------------------------------
+
+
+.. _fe-code-rate:
+
+.. flat-table:: enum fe_code_rate
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`FEC-NONE`:
+
+          ``FEC_NONE``
+
+       -  No Forward Error Correction Code
+
+    -  .. row 3
+
+       -  .. _`FEC-AUTO`:
+
+          ``FEC_AUTO``
+
+       -  Autodetect Error Correction Code
+
+    -  .. row 4
+
+       -  .. _`FEC-1-2`:
+
+          ``FEC_1_2``
+
+       -  Forward Error Correction Code 1/2
+
+    -  .. row 5
+
+       -  .. _`FEC-2-3`:
+
+          ``FEC_2_3``
+
+       -  Forward Error Correction Code 2/3
+
+    -  .. row 6
+
+       -  .. _`FEC-3-4`:
+
+          ``FEC_3_4``
+
+       -  Forward Error Correction Code 3/4
+
+    -  .. row 7
+
+       -  .. _`FEC-4-5`:
+
+          ``FEC_4_5``
+
+       -  Forward Error Correction Code 4/5
+
+    -  .. row 8
+
+       -  .. _`FEC-5-6`:
+
+          ``FEC_5_6``
+
+       -  Forward Error Correction Code 5/6
+
+    -  .. row 9
+
+       -  .. _`FEC-6-7`:
+
+          ``FEC_6_7``
+
+       -  Forward Error Correction Code 6/7
+
+    -  .. row 10
+
+       -  .. _`FEC-7-8`:
+
+          ``FEC_7_8``
+
+       -  Forward Error Correction Code 7/8
+
+    -  .. row 11
+
+       -  .. _`FEC-8-9`:
+
+          ``FEC_8_9``
+
+       -  Forward Error Correction Code 8/9
+
+    -  .. row 12
+
+       -  .. _`FEC-9-10`:
+
+          ``FEC_9_10``
+
+       -  Forward Error Correction Code 9/10
+
+    -  .. row 13
+
+       -  .. _`FEC-2-5`:
+
+          ``FEC_2_5``
+
+       -  Forward Error Correction Code 2/5
+
+    -  .. row 14
+
+       -  .. _`FEC-3-5`:
+
+          ``FEC_3_5``
+
+       -  Forward Error Correction Code 3/5
+
+
+
+.. _DTV-VOLTAGE:
+
+DTV_VOLTAGE
+===========
+
+The voltage is usually used with non-DiSEqC capable LNBs to switch the
+polarzation (horizontal/vertical). When using DiSEqC epuipment this
+voltage has to be switched consistently to the DiSEqC commands as
+described in the DiSEqC spec.
+
+
+.. _fe-sec-voltage:
+
+.. flat-table:: enum fe_sec_voltage
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`SEC-VOLTAGE-13`:
+
+          ``SEC_VOLTAGE_13``
+
+       -  Set DC voltage level to 13V
+
+    -  .. row 3
+
+       -  .. _`SEC-VOLTAGE-18`:
+
+          ``SEC_VOLTAGE_18``
+
+       -  Set DC voltage level to 18V
+
+    -  .. row 4
+
+       -  .. _`SEC-VOLTAGE-OFF`:
+
+          ``SEC_VOLTAGE_OFF``
+
+       -  Don't send any voltage to the antenna
+
+
+
+.. _DTV-TONE:
+
+DTV_TONE
+========
+
+Currently not used.
+
+
+.. _DTV-PILOT:
+
+DTV_PILOT
+=========
+
+Sets DVB-S2 pilot
+
+
+.. _fe-pilot-t:
+
+fe_pilot type
+-------------
+
+
+.. _fe-pilot:
+
+.. flat-table:: enum fe_pilot
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`PILOT-ON`:
+
+          ``PILOT_ON``
+
+       -  Pilot tones enabled
+
+    -  .. row 3
+
+       -  .. _`PILOT-OFF`:
+
+          ``PILOT_OFF``
+
+       -  Pilot tones disabled
+
+    -  .. row 4
+
+       -  .. _`PILOT-AUTO`:
+
+          ``PILOT_AUTO``
+
+       -  Autodetect pilot tones
+
+
+
+.. _DTV-ROLLOFF:
+
+DTV_ROLLOFF
+===========
+
+Sets DVB-S2 rolloff
+
+
+.. _fe-rolloff-t:
+
+fe_rolloff type
+---------------
+
+
+.. _fe-rolloff:
+
+.. flat-table:: enum fe_rolloff
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`ROLLOFF-35`:
+
+          ``ROLLOFF_35``
+
+       -  Roloff factor: α=35%
+
+    -  .. row 3
+
+       -  .. _`ROLLOFF-20`:
+
+          ``ROLLOFF_20``
+
+       -  Roloff factor: α=20%
+
+    -  .. row 4
+
+       -  .. _`ROLLOFF-25`:
+
+          ``ROLLOFF_25``
+
+       -  Roloff factor: α=25%
+
+    -  .. row 5
+
+       -  .. _`ROLLOFF-AUTO`:
+
+          ``ROLLOFF_AUTO``
+
+       -  Auto-detect the roloff factor.
+
+
+
+.. _DTV-DISEQC-SLAVE-REPLY:
+
+DTV_DISEQC_SLAVE_REPLY
+======================
+
+Currently not implemented.
+
+
+.. _DTV-FE-CAPABILITY-COUNT:
+
+DTV_FE_CAPABILITY_COUNT
+=======================
+
+Currently not implemented.
+
+
+.. _DTV-FE-CAPABILITY:
+
+DTV_FE_CAPABILITY
+=================
+
+Currently not implemented.
+
+
+.. _DTV-DELIVERY-SYSTEM:
+
+DTV_DELIVERY_SYSTEM
+===================
+
+Specifies the type of Delivery system
+
+
+.. _fe-delivery-system-t:
+
+fe_delivery_system type
+-----------------------
+
+Possible values:
+
+
+.. _fe-delivery-system:
+
+.. flat-table:: enum fe_delivery_system
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`SYS-UNDEFINED`:
+
+          ``SYS_UNDEFINED``
+
+       -  Undefined standard. Generally, indicates an error
+
+    -  .. row 3
+
+       -  .. _`SYS-DVBC-ANNEX-A`:
+
+          ``SYS_DVBC_ANNEX_A``
+
+       -  Cable TV: DVB-C following ITU-T J.83 Annex A spec
+
+    -  .. row 4
+
+       -  .. _`SYS-DVBC-ANNEX-B`:
+
+          ``SYS_DVBC_ANNEX_B``
+
+       -  Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM)
+
+    -  .. row 5
+
+       -  .. _`SYS-DVBC-ANNEX-C`:
+
+          ``SYS_DVBC_ANNEX_C``
+
+       -  Cable TV: DVB-C following ITU-T J.83 Annex C spec
+
+    -  .. row 6
+
+       -  .. _`SYS-ISDBC`:
+
+          ``SYS_ISDBC``
+
+       -  Cable TV: ISDB-C (no drivers yet)
+
+    -  .. row 7
+
+       -  .. _`SYS-DVBT`:
+
+          ``SYS_DVBT``
+
+       -  Terrestral TV: DVB-T
+
+    -  .. row 8
+
+       -  .. _`SYS-DVBT2`:
+
+          ``SYS_DVBT2``
+
+       -  Terrestral TV: DVB-T2
+
+    -  .. row 9
+
+       -  .. _`SYS-ISDBT`:
+
+          ``SYS_ISDBT``
+
+       -  Terrestral TV: ISDB-T
+
+    -  .. row 10
+
+       -  .. _`SYS-ATSC`:
+
+          ``SYS_ATSC``
+
+       -  Terrestral TV: ATSC
+
+    -  .. row 11
+
+       -  .. _`SYS-ATSCMH`:
+
+          ``SYS_ATSCMH``
+
+       -  Terrestral TV (mobile): ATSC-M/H
+
+    -  .. row 12
+
+       -  .. _`SYS-DTMB`:
+
+          ``SYS_DTMB``
+
+       -  Terrestrial TV: DTMB
+
+    -  .. row 13
+
+       -  .. _`SYS-DVBS`:
+
+          ``SYS_DVBS``
+
+       -  Satellite TV: DVB-S
+
+    -  .. row 14
+
+       -  .. _`SYS-DVBS2`:
+
+          ``SYS_DVBS2``
+
+       -  Satellite TV: DVB-S2
+
+    -  .. row 15
+
+       -  .. _`SYS-TURBO`:
+
+          ``SYS_TURBO``
+
+       -  Satellite TV: DVB-S Turbo
+
+    -  .. row 16
+
+       -  .. _`SYS-ISDBS`:
+
+          ``SYS_ISDBS``
+
+       -  Satellite TV: ISDB-S
+
+    -  .. row 17
+
+       -  .. _`SYS-DAB`:
+
+          ``SYS_DAB``
+
+       -  Digital audio: DAB (not fully supported)
+
+    -  .. row 18
+
+       -  .. _`SYS-DSS`:
+
+          ``SYS_DSS``
+
+       -  Satellite TV:"DSS (not fully supported)
+
+    -  .. row 19
+
+       -  .. _`SYS-CMMB`:
+
+          ``SYS_CMMB``
+
+       -  Terrestral TV (mobile):CMMB (not fully supported)
+
+    -  .. row 20
+
+       -  .. _`SYS-DVBH`:
+
+          ``SYS_DVBH``
+
+       -  Terrestral TV (mobile): DVB-H (standard deprecated)
+
+
+
+.. _DTV-ISDBT-PARTIAL-RECEPTION:
+
+DTV_ISDBT_PARTIAL_RECEPTION
+===========================
+
+If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents
+whether the channel is in partial reception mode or not.
+
+If '1' ``DTV_ISDBT_LAYERA_*`` values are assigned to the center segment
+and ``DTV_ISDBT_LAYERA_SEGMENT_COUNT`` has to be '1'.
+
+If in addition ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'
+``DTV_ISDBT_PARTIAL_RECEPTION`` represents whether this ISDB-Tsb channel
+is consisting of one segment and layer or three segments and two layers.
+
+Possible values: 0, 1, -1 (AUTO)
+
+
+.. _DTV-ISDBT-SOUND-BROADCASTING:
+
+DTV_ISDBT_SOUND_BROADCASTING
+============================
+
+This field represents whether the other DTV_ISDBT_*-parameters are
+referring to an ISDB-T and an ISDB-Tsb channel. (See also
+``DTV_ISDBT_PARTIAL_RECEPTION``).
+
+Possible values: 0, 1, -1 (AUTO)
+
+
+.. _DTV-ISDBT-SB-SUBCHANNEL-ID:
+
+DTV_ISDBT_SB_SUBCHANNEL_ID
+==========================
+
+This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
+
+(Note of the author: This might not be the correct description of the
+``SUBCHANNEL-ID`` in all details, but it is my understanding of the
+technical background needed to program a device)
+
+An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
+set of connected ISDB-Tsb channels. In this set of channels every
+channel can be received independently. The number of connected ISDB-Tsb
+segment can vary, e.g. depending on the frequency spectrum bandwidth
+available.
+
+Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
+broadcaster has several possibilities to put those channels in the air:
+Assuming a normal 13-segment ISDB-T spectrum he can align the 8 segments
+from position 1-8 to 5-13 or anything in between.
+
+The underlying layer of segments are subchannels: each segment is
+consisting of several subchannels with a predefined IDs. A sub-channel
+is used to help the demodulator to synchronize on the channel.
+
+An ISDB-T channel is always centered over all sub-channels. As for the
+example above, in ISDB-Tsb it is no longer as simple as that.
+
+``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the
+sub-channel ID of the segment to be demodulated.
+
+Possible values: 0 .. 41, -1 (AUTO)
+
+
+.. _DTV-ISDBT-SB-SEGMENT-IDX:
+
+DTV_ISDBT_SB_SEGMENT_IDX
+========================
+
+This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
+
+``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be
+demodulated for an ISDB-Tsb channel where several of them are
+transmitted in the connected manner.
+
+Possible values: 0 .. ``DTV_ISDBT_SB_SEGMENT_COUNT`` - 1
+
+Note: This value cannot be determined by an automatic channel search.
+
+
+.. _DTV-ISDBT-SB-SEGMENT-COUNT:
+
+DTV_ISDBT_SB_SEGMENT_COUNT
+==========================
+
+This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
+
+``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected
+ISDB-Tsb channels.
+
+Possible values: 1 .. 13
+
+Note: This value cannot be determined by an automatic channel search.
+
+
+.. _isdb-hierq-layers:
+
+DTV-ISDBT-LAYER* parameters
+===========================
+
+ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
+ISDB-T hierarchical layers can be decoded simultaneously. For that
+reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.
+
+ISDB-T has 3 hierarchical layers which each can use a part of the
+available segments. The total number of segments over all layers has to
+13 in ISDB-T.
+
+There are 3 parameter sets, for Layers A, B and C.
+
+
+.. _DTV-ISDBT-LAYER-ENABLED:
+
+DTV_ISDBT_LAYER_ENABLED
+-----------------------
+
+Hierarchical reception in ISDB-T is achieved by enabling or disabling
+layers in the decoding process. Setting all bits of
+``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to
+be demodulated. This is the default.
+
+If the channel is in the partial reception mode
+(``DTV_ISDBT_PARTIAL_RECEPTION`` = 1) the central segment can be decoded
+independently of the other 12 segments. In that mode layer A has to have
+a ``SEGMENT_COUNT`` of 1.
+
+In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according
+to ``DTV_ISDBT_PARTIAL_RECEPTION``. ``SEGMENT_COUNT`` must be filled
+accordingly.
+
+Possible values: 0x1, 0x2, 0x4 (|-able)
+
+``DTV_ISDBT_LAYER_ENABLED[0:0]`` - layer A
+
+``DTV_ISDBT_LAYER_ENABLED[1:1]`` - layer B
+
+``DTV_ISDBT_LAYER_ENABLED[2:2]`` - layer C
+
+``DTV_ISDBT_LAYER_ENABLED[31:3]`` unused
+
+
+.. _DTV-ISDBT-LAYER-FEC:
+
+DTV_ISDBT_LAYER*_FEC
+--------------------
+
+Possible values: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``,
+``FEC_5_6``, ``FEC_7_8``
+
+
+.. _DTV-ISDBT-LAYER-MODULATION:
+
+DTV_ISDBT_LAYER*_MODULATION
+---------------------------
+
+Possible values: ``QAM_AUTO``, QP\ ``SK, QAM_16``, ``QAM_64``, ``DQPSK``
+
+Note: If layer C is ``DQPSK`` layer B has to be ``DQPSK``. If layer B is
+``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ =0 layer has to be
+``DQPSK``.
+
+
+.. _DTV-ISDBT-LAYER-SEGMENT-COUNT:
+
+DTV_ISDBT_LAYER*_SEGMENT_COUNT
+------------------------------
+
+Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)
+
+Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and
+``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER`` *_SEGMENT_COUNT
+
+
+.. _isdbt-layer_seg-cnt-table:
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  PR
+
+       -  SB
+
+       -  Layer A width
+
+       -  Layer B width
+
+       -  Layer C width
+
+       -  total width
+
+    -  .. row 2
+
+       -  0
+
+       -  0
+
+       -  1 .. 13
+
+       -  1 .. 13
+
+       -  1 .. 13
+
+       -  13
+
+    -  .. row 3
+
+       -  1
+
+       -  0
+
+       -  1
+
+       -  1 .. 13
+
+       -  1 .. 13
+
+       -  13
+
+    -  .. row 4
+
+       -  0
+
+       -  1
+
+       -  1
+
+       -  0
+
+       -  0
+
+       -  1
+
+    -  .. row 5
+
+       -  1
+
+       -  1
+
+       -  1
+
+       -  2
+
+       -  0
+
+       -  13
+
+
+
+.. _DTV-ISDBT-LAYER-TIME-INTERLEAVING:
+
+DTV_ISDBT_LAYER*_TIME_INTERLEAVING
+----------------------------------
+
+Valid values: 0, 1, 2, 4, -1 (AUTO)
+
+when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid.
+
+Note: The real time interleaving length depends on the mode (fft-size).
+The values here are referring to what can be found in the
+TMCC-structure, as shown in the table below.
+
+
+.. _isdbt-layer-interleaving-table:
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  DTV_ISDBT_LAYER*_TIME_INTERLEAVING
+
+       -  Mode 1 (2K FFT)
+
+       -  Mode 2 (4K FFT)
+
+       -  Mode 3 (8K FFT)
+
+    -  .. row 2
+
+       -  0
+
+       -  0
+
+       -  0
+
+       -  0
+
+    -  .. row 3
+
+       -  1
+
+       -  4
+
+       -  2
+
+       -  1
+
+    -  .. row 4
+
+       -  2
+
+       -  8
+
+       -  4
+
+       -  2
+
+    -  .. row 5
+
+       -  4
+
+       -  16
+
+       -  8
+
+       -  4
+
+
+
+.. _DTV-ATSCMH-FIC-VER:
+
+DTV_ATSCMH_FIC_VER
+------------------
+
+Version number of the FIC (Fast Information Channel) signaling data.
+
+FIC is used for relaying information to allow rapid service acquisition
+by the receiver.
+
+Possible values: 0, 1, 2, 3, ..., 30, 31
+
+
+.. _DTV-ATSCMH-PARADE-ID:
+
+DTV_ATSCMH_PARADE_ID
+--------------------
+
+Parade identification number
+
+A parade is a collection of up to eight MH groups, conveying one or two
+ensembles.
+
+Possible values: 0, 1, 2, 3, ..., 126, 127
+
+
+.. _DTV-ATSCMH-NOG:
+
+DTV_ATSCMH_NOG
+--------------
+
+Number of MH groups per MH subframe for a designated parade.
+
+Possible values: 1, 2, 3, 4, 5, 6, 7, 8
+
+
+.. _DTV-ATSCMH-TNOG:
+
+DTV_ATSCMH_TNOG
+---------------
+
+Total number of MH groups including all MH groups belonging to all MH
+parades in one MH subframe.
+
+Possible values: 0, 1, 2, 3, ..., 30, 31
+
+
+.. _DTV-ATSCMH-SGN:
+
+DTV_ATSCMH_SGN
+--------------
+
+Start group number.
+
+Possible values: 0, 1, 2, 3, ..., 14, 15
+
+
+.. _DTV-ATSCMH-PRC:
+
+DTV_ATSCMH_PRC
+--------------
+
+Parade repetition cycle.
+
+Possible values: 1, 2, 3, 4, 5, 6, 7, 8
+
+
+.. _DTV-ATSCMH-RS-FRAME-MODE:
+
+DTV_ATSCMH_RS_FRAME_MODE
+------------------------
+
+Reed Solomon (RS) frame mode.
+
+Possible values are:
+
+
+.. _atscmh-rs-frame-mode:
+
+.. flat-table:: enum atscmh_rs_frame_mode
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`ATSCMH-RSFRAME-PRI-ONLY`:
+
+          ``ATSCMH_RSFRAME_PRI_ONLY``
+
+       -  Single Frame: There is only a primary RS Frame for all Group
+          Regions.
+
+    -  .. row 3
+
+       -  .. _`ATSCMH-RSFRAME-PRI-SEC`:
+
+          ``ATSCMH_RSFRAME_PRI_SEC``
+
+       -  Dual Frame: There are two separate RS Frames: Primary RS Frame for
+          Group Region A and B and Secondary RS Frame for Group Region C and
+          D.
+
+
+
+.. _DTV-ATSCMH-RS-FRAME-ENSEMBLE:
+
+DTV_ATSCMH_RS_FRAME_ENSEMBLE
+----------------------------
+
+Reed Solomon(RS) frame ensemble.
+
+Possible values are:
+
+
+.. _atscmh-rs-frame-ensemble:
+
+.. flat-table:: enum atscmh_rs_frame_ensemble
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`ATSCMH-RSFRAME-ENS-PRI`:
+
+          ``ATSCMH_RSFRAME_ENS_PRI``
+
+       -  Primary Ensemble.
+
+    -  .. row 3
+
+       -  .. _`ATSCMH-RSFRAME-ENS-SEC`:
+
+          ``AATSCMH_RSFRAME_PRI_SEC``
+
+       -  Secondary Ensemble.
+
+    -  .. row 4
+
+       -  .. _`ATSCMH-RSFRAME-RES`:
+
+          ``AATSCMH_RSFRAME_RES``
+
+       -  Reserved. Shouldn't be used.
+
+
+
+.. _DTV-ATSCMH-RS-CODE-MODE-PRI:
+
+DTV_ATSCMH_RS_CODE_MODE_PRI
+---------------------------
+
+Reed Solomon (RS) code mode (primary).
+
+Possible values are:
+
+
+.. _atscmh-rs-code-mode:
+
+.. flat-table:: enum atscmh_rs_code_mode
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`ATSCMH-RSCODE-211-187`:
+
+          ``ATSCMH_RSCODE_211_187``
+
+       -  Reed Solomon code (211,187).
+
+    -  .. row 3
+
+       -  .. _`ATSCMH-RSCODE-223-187`:
+
+          ``ATSCMH_RSCODE_223_187``
+
+       -  Reed Solomon code (223,187).
+
+    -  .. row 4
+
+       -  .. _`ATSCMH-RSCODE-235-187`:
+
+          ``ATSCMH_RSCODE_235_187``
+
+       -  Reed Solomon code (235,187).
+
+    -  .. row 5
+
+       -  .. _`ATSCMH-RSCODE-RES`:
+
+          ``ATSCMH_RSCODE_RES``
+
+       -  Reserved. Shouldn't be used.
+
+
+
+.. _DTV-ATSCMH-RS-CODE-MODE-SEC:
+
+DTV_ATSCMH_RS_CODE_MODE_SEC
+---------------------------
+
+Reed Solomon (RS) code mode (secondary).
+
+Possible values are the same as documented on enum
+:ref:`atscmh_rs_code_mode <atscmh-rs-code-mode>`:
+
+
+.. _DTV-ATSCMH-SCCC-BLOCK-MODE:
+
+DTV_ATSCMH_SCCC_BLOCK_MODE
+--------------------------
+
+Series Concatenated Convolutional Code Block Mode.
+
+Possible values are:
+
+
+.. _atscmh-sccc-block-mode:
+
+.. flat-table:: enum atscmh_scc_block_mode
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`ATSCMH-SCCC-BLK-SEP`:
+
+          ``ATSCMH_SCCC_BLK_SEP``
+
+       -  Separate SCCC: the SCCC outer code mode shall be set independently
+          for each Group Region (A, B, C, D)
+
+    -  .. row 3
+
+       -  .. _`ATSCMH-SCCC-BLK-COMB`:
+
+          ``ATSCMH_SCCC_BLK_COMB``
+
+       -  Combined SCCC: all four Regions shall have the same SCCC outer
+          code mode.
+
+    -  .. row 4
+
+       -  .. _`ATSCMH-SCCC-BLK-RES`:
+
+          ``ATSCMH_SCCC_BLK_RES``
+
+       -  Reserved. Shouldn't be used.
+
+
+
+.. _DTV-ATSCMH-SCCC-CODE-MODE-A:
+
+DTV_ATSCMH_SCCC_CODE_MODE_A
+---------------------------
+
+Series Concatenated Convolutional Code Rate.
+
+Possible values are:
+
+
+.. _atscmh-sccc-code-mode:
+
+.. flat-table:: enum atscmh_sccc_code_mode
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`ATSCMH-SCCC-CODE-HLF`:
+
+          ``ATSCMH_SCCC_CODE_HLF``
+
+       -  The outer code rate of a SCCC Block is 1/2 rate.
+
+    -  .. row 3
+
+       -  .. _`ATSCMH-SCCC-CODE-QTR`:
+
+          ``ATSCMH_SCCC_CODE_QTR``
+
+       -  The outer code rate of a SCCC Block is 1/4 rate.
+
+    -  .. row 4
+
+       -  .. _`ATSCMH-SCCC-CODE-RES`:
+
+          ``ATSCMH_SCCC_CODE_RES``
+
+       -  to be documented.
+
+
+
+.. _DTV-ATSCMH-SCCC-CODE-MODE-B:
+
+DTV_ATSCMH_SCCC_CODE_MODE_B
+---------------------------
+
+Series Concatenated Convolutional Code Rate.
+
+Possible values are the same as documented on enum
+:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`.
+
+
+.. _DTV-ATSCMH-SCCC-CODE-MODE-C:
+
+DTV_ATSCMH_SCCC_CODE_MODE_C
+---------------------------
+
+Series Concatenated Convolutional Code Rate.
+
+Possible values are the same as documented on enum
+:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`.
+
+
+.. _DTV-ATSCMH-SCCC-CODE-MODE-D:
+
+DTV_ATSCMH_SCCC_CODE_MODE_D
+---------------------------
+
+Series Concatenated Convolutional Code Rate.
+
+Possible values are the same as documented on enum
+:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`.
+
+
+.. _DTV-API-VERSION:
+
+DTV_API_VERSION
+===============
+
+Returns the major/minor version of the DVB API
+
+
+.. _DTV-CODE-RATE-HP:
+
+DTV_CODE_RATE_HP
+================
+
+Used on terrestrial transmissions. The acceptable values are the ones
+described at :ref:`fe_transmit_mode_t <fe-transmit-mode-t>`.
+
+
+.. _DTV-CODE-RATE-LP:
+
+DTV_CODE_RATE_LP
+================
+
+Used on terrestrial transmissions. The acceptable values are the ones
+described at :ref:`fe_transmit_mode_t <fe-transmit-mode-t>`.
+
+
+.. _DTV-GUARD-INTERVAL:
+
+DTV_GUARD_INTERVAL
+==================
+
+Possible values are:
+
+
+.. _fe-guard-interval-t:
+
+Modulation guard interval
+-------------------------
+
+
+.. _fe-guard-interval:
+
+.. flat-table:: enum fe_guard_interval
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`GUARD-INTERVAL-AUTO`:
+
+          ``GUARD_INTERVAL_AUTO``
+
+       -  Autodetect the guard interval
+
+    -  .. row 3
+
+       -  .. _`GUARD-INTERVAL-1-128`:
+
+          ``GUARD_INTERVAL_1_128``
+
+       -  Guard interval 1/128
+
+    -  .. row 4
+
+       -  .. _`GUARD-INTERVAL-1-32`:
+
+          ``GUARD_INTERVAL_1_32``
+
+       -  Guard interval 1/32
+
+    -  .. row 5
+
+       -  .. _`GUARD-INTERVAL-1-16`:
+
+          ``GUARD_INTERVAL_1_16``
+
+       -  Guard interval 1/16
+
+    -  .. row 6
+
+       -  .. _`GUARD-INTERVAL-1-8`:
+
+          ``GUARD_INTERVAL_1_8``
+
+       -  Guard interval 1/8
+
+    -  .. row 7
+
+       -  .. _`GUARD-INTERVAL-1-4`:
+
+          ``GUARD_INTERVAL_1_4``
+
+       -  Guard interval 1/4
+
+    -  .. row 8
+
+       -  .. _`GUARD-INTERVAL-19-128`:
+
+          ``GUARD_INTERVAL_19_128``
+
+       -  Guard interval 19/128
+
+    -  .. row 9
+
+       -  .. _`GUARD-INTERVAL-19-256`:
+
+          ``GUARD_INTERVAL_19_256``
+
+       -  Guard interval 19/256
+
+    -  .. row 10
+
+       -  .. _`GUARD-INTERVAL-PN420`:
+
+          ``GUARD_INTERVAL_PN420``
+
+       -  PN length 420 (1/4)
+
+    -  .. row 11
+
+       -  .. _`GUARD-INTERVAL-PN595`:
+
+          ``GUARD_INTERVAL_PN595``
+
+       -  PN length 595 (1/6)
+
+    -  .. row 12
+
+       -  .. _`GUARD-INTERVAL-PN945`:
+
+          ``GUARD_INTERVAL_PN945``
+
+       -  PN length 945 (1/9)
+
+
+Notes:
+
+1) If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the
+hardware will try to find the correct guard interval (if capable) and
+will use TMCC to fill in the missing parameters.
+
+2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at
+present
+
+3) DTMB specifies PN420, PN595 and PN945.
+
+
+.. _DTV-TRANSMISSION-MODE:
+
+DTV_TRANSMISSION_MODE
+=====================
+
+Specifies the number of carriers used by the standard. This is used only
+on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB
+
+
+.. _fe-transmit-mode-t:
+
+enum fe_transmit_mode: Number of carriers per channel
+-----------------------------------------------------
+
+
+.. _fe-transmit-mode:
+
+.. flat-table:: enum fe_transmit_mode
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`TRANSMISSION-MODE-AUTO`:
+
+          ``TRANSMISSION_MODE_AUTO``
+
+       -  Autodetect transmission mode. The hardware will try to find the
+          correct FFT-size (if capable) to fill in the missing parameters.
+
+    -  .. row 3
+
+       -  .. _`TRANSMISSION-MODE-1K`:
+
+          ``TRANSMISSION_MODE_1K``
+
+       -  Transmission mode 1K
+
+    -  .. row 4
+
+       -  .. _`TRANSMISSION-MODE-2K`:
+
+          ``TRANSMISSION_MODE_2K``
+
+       -  Transmission mode 2K
+
+    -  .. row 5
+
+       -  .. _`TRANSMISSION-MODE-8K`:
+
+          ``TRANSMISSION_MODE_8K``
+
+       -  Transmission mode 8K
+
+    -  .. row 6
+
+       -  .. _`TRANSMISSION-MODE-4K`:
+
+          ``TRANSMISSION_MODE_4K``
+
+       -  Transmission mode 4K
+
+    -  .. row 7
+
+       -  .. _`TRANSMISSION-MODE-16K`:
+
+          ``TRANSMISSION_MODE_16K``
+
+       -  Transmission mode 16K
+
+    -  .. row 8
+
+       -  .. _`TRANSMISSION-MODE-32K`:
+
+          ``TRANSMISSION_MODE_32K``
+
+       -  Transmission mode 32K
+
+    -  .. row 9
+
+       -  .. _`TRANSMISSION-MODE-C1`:
+
+          ``TRANSMISSION_MODE_C1``
+
+       -  Single Carrier (C=1) transmission mode (DTMB)
+
+    -  .. row 10
+
+       -  .. _`TRANSMISSION-MODE-C3780`:
+
+          ``TRANSMISSION_MODE_C3780``
+
+       -  Multi Carrier (C=3780) transmission mode (DTMB)
+
+
+Notes:
+
+1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
+'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K
+
+2) If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO``
+the hardware will try to find the correct FFT-size (if capable) and will
+use TMCC to fill in the missing parameters.
+
+3) DVB-T specifies 2K and 8K as valid sizes.
+
+4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.
+
+5) DTMB specifies C1 and C3780.
+
+
+.. _DTV-HIERARCHY:
+
+DTV_HIERARCHY
+=============
+
+Frontend hierarchy
+
+
+.. _fe-hierarchy-t:
+
+Frontend hierarchy
+------------------
+
+
+.. _fe-hierarchy:
+
+.. flat-table:: enum fe_hierarchy
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`HIERARCHY-NONE`:
+
+          ``HIERARCHY_NONE``
+
+       -  No hierarchy
+
+    -  .. row 3
+
+       -  .. _`HIERARCHY-AUTO`:
+
+          ``HIERARCHY_AUTO``
+
+       -  Autodetect hierarchy (if supported)
+
+    -  .. row 4
+
+       -  .. _`HIERARCHY-1`:
+
+          ``HIERARCHY_1``
+
+       -  Hierarchy 1
+
+    -  .. row 5
+
+       -  .. _`HIERARCHY-2`:
+
+          ``HIERARCHY_2``
+
+       -  Hierarchy 2
+
+    -  .. row 6
+
+       -  .. _`HIERARCHY-4`:
+
+          ``HIERARCHY_4``
+
+       -  Hierarchy 4
+
+
+
+.. _DTV-STREAM-ID:
+
+DTV_STREAM_ID
+=============
+
+DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on
+a single transport stream. This property enables the DVB driver to
+handle substream filtering, when supported by the hardware. By default,
+substream filtering is disabled.
+
+For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255.
+
+For ISDB, the valid substream id range is from 1 to 65535.
+
+To disable it, you should use the special macro NO_STREAM_ID_FILTER.
+
+Note: any value outside the id range also disables filtering.
+
+
+.. _DTV-DVBT2-PLP-ID-LEGACY:
+
+DTV_DVBT2_PLP_ID_LEGACY
+=======================
+
+Obsolete, replaced with DTV_STREAM_ID.
+
+
+.. _DTV-ENUM-DELSYS:
+
+DTV_ENUM_DELSYS
+===============
+
+A Multi standard frontend needs to advertise the delivery systems
+provided. Applications need to enumerate the provided delivery systems,
+before using any other operation with the frontend. Prior to it's
+introduction, FE_GET_INFO was used to determine a frontend type. A
+frontend which provides more than a single delivery system,
+FE_GET_INFO doesn't help much. Applications which intends to use a
+multistandard frontend must enumerate the delivery systems associated
+with it, rather than trying to use FE_GET_INFO. In the case of a
+legacy frontend, the result is just the same as with FE_GET_INFO, but
+in a more structured format
+
+
+.. _DTV-INTERLEAVING:
+
+DTV_INTERLEAVING
+================
+
+Time interleaving to be used. Currently, used only on DTMB.
+
+
+.. _fe-interleaving:
+
+.. flat-table:: enum fe_interleaving
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _`INTERLEAVING-NONE`:
+
+          ``INTERLEAVING_NONE``
+
+       -  No interleaving.
+
+    -  .. row 3
+
+       -  .. _`INTERLEAVING-AUTO`:
+
+          ``INTERLEAVING_AUTO``
+
+       -  Auto-detect interleaving.
+
+    -  .. row 4
+
+       -  .. _`INTERLEAVING-240`:
+
+          ``INTERLEAVING_240``
+
+       -  Interleaving of 240 symbols.
+
+    -  .. row 5
+
+       -  .. _`INTERLEAVING-720`:
+
+          ``INTERLEAVING_720``
+
+       -  Interleaving of 720 symbols.
+
+
+
+.. _DTV-LNA:
+
+DTV_LNA
+=======
+
+Low-noise amplifier.
+
+Hardware might offer controllable LNA which can be set manually using
+that parameter. Usually LNA could be found only from terrestrial devices
+if at all.
+
+Possible values: 0, 1, LNA_AUTO
+
+0, LNA off
+
+1, LNA on
+
+use the special macro LNA_AUTO to set LNA auto
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend-property-cable-systems.rst b/Documentation/linux_tv/media/dvb/frontend-property-cable-systems.rst
new file mode 100644
index 0000000..360966e
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend-property-cable-systems.rst
@@ -0,0 +1,84 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend-property-cable-systems:
+
+*****************************************
+Properties used on cable delivery systems
+*****************************************
+
+
+.. _dvbc-params:
+
+DVB-C delivery system
+=====================
+
+The DVB-C Annex-A is the widely used cable standard. Transmission uses
+QAM modulation.
+
+The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It
+supports a subset of the Annex A modulation types, and a roll-off of
+0.13, instead of 0.15
+
+The following parameters are valid for DVB-C Annex A/C:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _dvbc-annex-b-params:
+
+DVB-C Annex B delivery system
+=============================
+
+The DVB-C Annex-B is only used on a few Countries like the United
+States.
+
+The following parameters are valid for DVB-C Annex B:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend-property-satellite-systems.rst b/Documentation/linux_tv/media/dvb/frontend-property-satellite-systems.rst
new file mode 100644
index 0000000..1a204ac
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend-property-satellite-systems.rst
@@ -0,0 +1,112 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend-property-satellite-systems:
+
+*********************************************
+Properties used on satellite delivery systems
+*********************************************
+
+
+.. _dvbs-params:
+
+DVB-S delivery system
+=====================
+
+The following parameters are valid for DVB-S:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
+
+-  :ref:`DTV_VOLTAGE <DTV-VOLTAGE>`
+
+-  :ref:`DTV_TONE <DTV-TONE>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+Future implementations might add those two missing parameters:
+
+-  :ref:`DTV_DISEQC_MASTER <DTV-DISEQC-MASTER>`
+
+-  :ref:`DTV_DISEQC_SLAVE_REPLY <DTV-DISEQC-SLAVE-REPLY>`
+
+
+.. _dvbs2-params:
+
+DVB-S2 delivery system
+======================
+
+In addition to all parameters valid for DVB-S, DVB-S2 supports the
+following parameters:
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_PILOT <DTV-PILOT>`
+
+-  :ref:`DTV_ROLLOFF <DTV-ROLLOFF>`
+
+-  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _turbo-params:
+
+Turbo code delivery system
+==========================
+
+In addition to all parameters valid for DVB-S, turbo code supports the
+following parameters:
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+
+.. _isdbs-params:
+
+ISDB-S delivery system
+======================
+
+The following parameters are valid for ISDB-S:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>`
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
+
+-  :ref:`DTV_VOLTAGE <DTV-VOLTAGE>`
+
+-  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend-property-terrestrial-systems.rst b/Documentation/linux_tv/media/dvb/frontend-property-terrestrial-systems.rst
new file mode 100644
index 0000000..7802659
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend-property-terrestrial-systems.rst
@@ -0,0 +1,303 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend-property-terrestrial-systems:
+
+***********************************************
+Properties used on terrestrial delivery systems
+***********************************************
+
+
+.. _dvbt-params:
+
+DVB-T delivery system
+=====================
+
+The following parameters are valid for DVB-T:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_CODE_RATE_HP <DTV-CODE-RATE-HP>`
+
+-  :ref:`DTV_CODE_RATE_LP <DTV-CODE-RATE-LP>`
+
+-  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
+
+-  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
+
+-  :ref:`DTV_HIERARCHY <DTV-HIERARCHY>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _dvbt2-params:
+
+DVB-T2 delivery system
+======================
+
+DVB-T2 support is currently in the early stages of development, so
+expect that this section maygrow and become more detailed with time.
+
+The following parameters are valid for DVB-T2:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_CODE_RATE_HP <DTV-CODE-RATE-HP>`
+
+-  :ref:`DTV_CODE_RATE_LP <DTV-CODE-RATE-LP>`
+
+-  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
+
+-  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
+
+-  :ref:`DTV_HIERARCHY <DTV-HIERARCHY>`
+
+-  :ref:`DTV_STREAM_ID <DTV-STREAM-ID>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _isdbt:
+
+ISDB-T delivery system
+======================
+
+This ISDB-T/ISDB-Tsb API extension should reflect all information needed
+to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible that some
+very sophisticated devices won't need certain parameters to tune.
+
+The information given here should help application writers to know how
+to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.
+
+The details given here about ISDB-T and ISDB-Tsb are just enough to
+basically show the dependencies between the needed parameter values, but
+surely some information is left out. For more detailed information see
+the following documents:
+
+ARIB STD-B31 - "Transmission System for Digital Terrestrial Television
+Broadcasting" and
+
+ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial Television
+Broadcasting".
+
+In order to understand the ISDB specific parameters, one has to have
+some knowledge the channel structure in ISDB-T and ISDB-Tsb. I.e. it has
+to be known to the reader that an ISDB-T channel consists of 13
+segments, that it can have up to 3 layer sharing those segments, and
+things like that.
+
+The following parameters are valid for ISDB-T:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
+
+-  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
+
+-  :ref:`DTV_ISDBT_LAYER_ENABLED <DTV-ISDBT-LAYER-ENABLED>`
+
+-  :ref:`DTV_ISDBT_PARTIAL_RECEPTION <DTV-ISDBT-PARTIAL-RECEPTION>`
+
+-  :ref:`DTV_ISDBT_SOUND_BROADCASTING <DTV-ISDBT-SOUND-BROADCASTING>`
+
+-  :ref:`DTV_ISDBT_SB_SUBCHANNEL_ID <DTV-ISDBT-SB-SUBCHANNEL-ID>`
+
+-  :ref:`DTV_ISDBT_SB_SEGMENT_IDX <DTV-ISDBT-SB-SEGMENT-IDX>`
+
+-  :ref:`DTV_ISDBT_SB_SEGMENT_COUNT <DTV-ISDBT-SB-SEGMENT-COUNT>`
+
+-  :ref:`DTV_ISDBT_LAYERA_FEC <DTV-ISDBT-LAYER-FEC>`
+
+-  :ref:`DTV_ISDBT_LAYERA_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
+
+-  :ref:`DTV_ISDBT_LAYERA_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
+
+-  :ref:`DTV_ISDBT_LAYERA_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
+
+-  :ref:`DTV_ISDBT_LAYERB_FEC <DTV-ISDBT-LAYER-FEC>`
+
+-  :ref:`DTV_ISDBT_LAYERB_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
+
+-  :ref:`DTV_ISDBT_LAYERB_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
+
+-  :ref:`DTV_ISDBT_LAYERB_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
+
+-  :ref:`DTV_ISDBT_LAYERC_FEC <DTV-ISDBT-LAYER-FEC>`
+
+-  :ref:`DTV_ISDBT_LAYERC_MODULATION <DTV-ISDBT-LAYER-MODULATION>`
+
+-  :ref:`DTV_ISDBT_LAYERC_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>`
+
+-  :ref:`DTV_ISDBT_LAYERC_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _atsc-params:
+
+ATSC delivery system
+====================
+
+The following parameters are valid for ATSC:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _atscmh-params:
+
+ATSC-MH delivery system
+=======================
+
+The following parameters are valid for ATSC-MH:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_ATSCMH_FIC_VER <DTV-ATSCMH-FIC-VER>`
+
+-  :ref:`DTV_ATSCMH_PARADE_ID <DTV-ATSCMH-PARADE-ID>`
+
+-  :ref:`DTV_ATSCMH_NOG <DTV-ATSCMH-NOG>`
+
+-  :ref:`DTV_ATSCMH_TNOG <DTV-ATSCMH-TNOG>`
+
+-  :ref:`DTV_ATSCMH_SGN <DTV-ATSCMH-SGN>`
+
+-  :ref:`DTV_ATSCMH_PRC <DTV-ATSCMH-PRC>`
+
+-  :ref:`DTV_ATSCMH_RS_FRAME_MODE <DTV-ATSCMH-RS-FRAME-MODE>`
+
+-  :ref:`DTV_ATSCMH_RS_FRAME_ENSEMBLE <DTV-ATSCMH-RS-FRAME-ENSEMBLE>`
+
+-  :ref:`DTV_ATSCMH_RS_CODE_MODE_PRI <DTV-ATSCMH-RS-CODE-MODE-PRI>`
+
+-  :ref:`DTV_ATSCMH_RS_CODE_MODE_SEC <DTV-ATSCMH-RS-CODE-MODE-SEC>`
+
+-  :ref:`DTV_ATSCMH_SCCC_BLOCK_MODE <DTV-ATSCMH-SCCC-BLOCK-MODE>`
+
+-  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_A <DTV-ATSCMH-SCCC-CODE-MODE-A>`
+
+-  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_B <DTV-ATSCMH-SCCC-CODE-MODE-B>`
+
+-  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_C <DTV-ATSCMH-SCCC-CODE-MODE-C>`
+
+-  :ref:`DTV_ATSCMH_SCCC_CODE_MODE_D <DTV-ATSCMH-SCCC-CODE-MODE-D>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. _dtmb-params:
+
+DTMB delivery system
+====================
+
+The following parameters are valid for DTMB:
+
+-  :ref:`DTV_API_VERSION <DTV-API-VERSION>`
+
+-  :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>`
+
+-  :ref:`DTV_TUNE <DTV-TUNE>`
+
+-  :ref:`DTV_CLEAR <DTV-CLEAR>`
+
+-  :ref:`DTV_FREQUENCY <DTV-FREQUENCY>`
+
+-  :ref:`DTV_MODULATION <DTV-MODULATION>`
+
+-  :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>`
+
+-  :ref:`DTV_INVERSION <DTV-INVERSION>`
+
+-  :ref:`DTV_INNER_FEC <DTV-INNER-FEC>`
+
+-  :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>`
+
+-  :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>`
+
+-  :ref:`DTV_INTERLEAVING <DTV-INTERLEAVING>`
+
+-  :ref:`DTV_LNA <DTV-LNA>`
+
+In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>`
+are also valid.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend-stat-properties.rst b/Documentation/linux_tv/media/dvb/frontend-stat-properties.rst
new file mode 100644
index 0000000..36461d6
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend-stat-properties.rst
@@ -0,0 +1,254 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend-stat-properties:
+
+******************************
+Frontend statistics indicators
+******************************
+
+The values are returned via ``dtv_property.stat``. If the property is
+supported, ``dtv_property.stat.len`` is bigger than zero.
+
+For most delivery systems, ``dtv_property.stat.len`` will be 1 if the
+stats is supported, and the properties will return a single value for
+each parameter.
+
+It should be noted, however, that new OFDM delivery systems like ISDB
+can use different modulation types for each group of carriers. On such
+standards, up to 3 groups of statistics can be provided, and
+``dtv_property.stat.len`` is updated to reflect the "global" metrics,
+plus one metric per each carrier group (called "layer" on ISDB).
+
+So, in order to be consistent with other delivery systems, the first
+value at :ref:`dtv_property.stat.dtv_stats <dtv-stats>` array refers
+to the global metric. The other elements of the array represent each
+layer, starting from layer A(index 1), layer B (index 2) and so on.
+
+The number of filled elements are stored at ``dtv_property.stat.len``.
+
+Each element of the ``dtv_property.stat.dtv_stats`` array consists on
+two elements:
+
+-  ``svalue`` or ``uvalue``, where ``svalue`` is for signed values of
+   the measure (dB measures) and ``uvalue`` is for unsigned values
+   (counters, relative scale)
+
+-  ``scale`` - Scale for the value. It can be:
+
+   -  ``FE_SCALE_NOT_AVAILABLE`` - The parameter is supported by the
+      frontend, but it was not possible to collect it (could be a
+      transitory or permanent condition)
+
+   -  ``FE_SCALE_DECIBEL`` - parameter is a signed value, measured in
+      1/1000 dB
+
+   -  ``FE_SCALE_RELATIVE`` - parameter is a unsigned value, where 0
+      means 0% and 65535 means 100%.
+
+   -  ``FE_SCALE_COUNTER`` - parameter is a unsigned value that counts
+      the occurrence of an event, like bit error, block error, or lapsed
+      time.
+
+
+.. _DTV-STAT-SIGNAL-STRENGTH:
+
+DTV_STAT_SIGNAL_STRENGTH
+========================
+
+Indicates the signal strength level at the analog part of the tuner or
+of the demod.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_DECIBEL`` - signal strength is in 0.001 dBm units, power
+   measured in miliwatts. This value is generally negative.
+
+-  ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100%
+   measurement for power (actually, 0 to 65535).
+
+
+.. _DTV-STAT-CNR:
+
+DTV_STAT_CNR
+============
+
+Indicates the Signal to Noise ratio for the main carrier.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_DECIBEL`` - Signal/Noise ratio is in 0.001 dB units.
+
+-  ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100%
+   measurement for Signal/Noise (actually, 0 to 65535).
+
+
+.. _DTV-STAT-PRE-ERROR-BIT-COUNT:
+
+DTV_STAT_PRE_ERROR_BIT_COUNT
+============================
+
+Measures the number of bit errors before the forward error correction
+(FEC) on the inner coding block (before Viterbi, LDPC or other inner
+code).
+
+This measure is taken during the same interval as
+``DTV_STAT_PRE_TOTAL_BIT_COUNT``.
+
+In order to get the BER (Bit Error Rate) measurement, it should be
+divided by
+:ref:`DTV_STAT_PRE_TOTAL_BIT_COUNT <DTV-STAT-PRE-TOTAL-BIT-COUNT>`.
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of error bits counted before the inner
+   coding.
+
+
+.. _DTV-STAT-PRE-TOTAL-BIT-COUNT:
+
+DTV_STAT_PRE_TOTAL_BIT_COUNT
+============================
+
+Measures the amount of bits received before the inner code block, during
+the same period as
+:ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`
+measurement was taken.
+
+It should be noted that this measurement can be smaller than the total
+amount of bits on the transport stream, as the frontend may need to
+manually restart the measurement, losing some data between each
+measurement interval.
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of bits counted while measuring
+   :ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`.
+
+
+.. _DTV-STAT-POST-ERROR-BIT-COUNT:
+
+DTV_STAT_POST_ERROR_BIT_COUNT
+=============================
+
+Measures the number of bit errors after the forward error correction
+(FEC) done by inner code block (after Viterbi, LDPC or other inner
+code).
+
+This measure is taken during the same interval as
+``DTV_STAT_POST_TOTAL_BIT_COUNT``.
+
+In order to get the BER (Bit Error Rate) measurement, it should be
+divided by
+:ref:`DTV_STAT_POST_TOTAL_BIT_COUNT <DTV-STAT-POST-TOTAL-BIT-COUNT>`.
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of error bits counted after the inner
+   coding.
+
+
+.. _DTV-STAT-POST-TOTAL-BIT-COUNT:
+
+DTV_STAT_POST_TOTAL_BIT_COUNT
+=============================
+
+Measures the amount of bits received after the inner coding, during the
+same period as
+:ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`
+measurement was taken.
+
+It should be noted that this measurement can be smaller than the total
+amount of bits on the transport stream, as the frontend may need to
+manually restart the measurement, losing some data between each
+measurement interval.
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of bits counted while measuring
+   :ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`.
+
+
+.. _DTV-STAT-ERROR-BLOCK-COUNT:
+
+DTV_STAT_ERROR_BLOCK_COUNT
+==========================
+
+Measures the number of block errors after the outer forward error
+correction coding (after Reed-Solomon or other outer code).
+
+This measurement is monotonically increased, as the frontend gets more
+bit count measurements. The frontend may reset it when a
+channel/transponder is tuned.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of error blocks counted after the outer
+   coding.
+
+
+.. _DTV-STAT-TOTAL-BLOCK-COUNT:
+
+DTV-STAT_TOTAL_BLOCK_COUNT
+==========================
+
+Measures the total number of blocks received during the same period as
+:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`
+measurement was taken.
+
+It can be used to calculate the PER indicator, by dividing
+:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>` by
+:ref:`DTV-STAT-TOTAL-BLOCK-COUNT <DTV-STAT-TOTAL-BLOCK-COUNT>`.
+
+Possible scales for this metric are:
+
+-  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
+   measurement was not complete yet.
+
+-  ``FE_SCALE_COUNTER`` - Number of blocks counted while measuring
+   :ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend.rst b/Documentation/linux_tv/media/dvb/frontend.rst
new file mode 100644
index 0000000..46be409
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend.rst
@@ -0,0 +1,62 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb_frontend:
+
+################
+DVB Frontend API
+################
+The DVB frontend API was designed to support three types of delivery
+systems:
+
+-  Terrestrial systems: DVB-T, DVB-T2, ATSC, ATSC M/H, ISDB-T, DVB-H,
+   DTMB, CMMB
+
+-  Cable systems: DVB-C Annex A/C, ClearQAM (DVB-C Annex B), ISDB-C
+
+-  Satellite systems: DVB-S, DVB-S2, DVB Turbo, ISDB-S, DSS
+
+The DVB frontend controls several sub-devices including:
+
+-  Tuner
+
+-  Digital TV demodulator
+
+-  Low noise amplifier (LNA)
+
+-  Satellite Equipment Control (SEC) hardware (only for Satellite).
+
+The frontend can be accessed through ``/dev/dvb/adapter?/frontend?``.
+Data types and ioctl definitions can be accessed by including
+``linux/dvb/frontend.h`` in your application.
+
+NOTE: Transmission via the internet (DVB-IP) is not yet handled by this
+API but a future extension is possible.
+
+On Satellite systems, the API support for the Satellite Equipment
+Control (SEC) allows to power control and to send/receive signals to
+control the antenna subsystem, selecting the polarization and choosing
+the Intermediate Frequency IF) of the Low Noise Block Converter Feed
+Horn (LNBf). It supports the DiSEqC and V-SEC protocols. The DiSEqC
+(digital SEC) specification is available at
+`Eutelsat <http://www.eutelsat.com/satellites/4_5_5.html>`__.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    query-dvb-frontend-info
+    dvb-fe-read-status
+    dvbproperty
+    frontend_fcalls
+    frontend_legacy_dvbv3_api
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend_f_close.rst b/Documentation/linux_tv/media/dvb/frontend_f_close.rst
new file mode 100644
index 0000000..cde8732
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend_f_close.rst
@@ -0,0 +1,55 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend_f_close:
+
+********************
+DVB frontend close()
+********************
+
+*man fe-close(2)*
+
+Close a frontend device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <unistd.h>
+
+
+.. c:function:: int close( int fd )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <func-open>`.
+
+
+Description
+===========
+
+This system call closes a previously opened front-end device. After
+closing a front-end device, its corresponding hardware might be powered
+down automatically.
+
+
+Return Value
+============
+
+The function returns 0 on success, -1 on failure and the ``errno`` is
+set appropriately. Possible error codes:
+
+EBADF
+    ``fd`` is not a valid open file descriptor.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend_f_open.rst b/Documentation/linux_tv/media/dvb/frontend_f_open.rst
new file mode 100644
index 0000000..676ae92
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend_f_open.rst
@@ -0,0 +1,108 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend_f_open:
+
+*******************
+DVB frontend open()
+*******************
+
+*man fe-open(2)*
+
+Open a frontend device
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+    #include <fcntl.h>
+
+
+.. c:function:: int open( const char *device_name, int flags )
+
+Arguments
+=========
+
+``device_name``
+    Device to be opened.
+
+``flags``
+    Open flags. Access can either be ``O_RDWR`` or ``O_RDONLY``.
+
+    Multiple opens are allowed with ``O_RDONLY``. In this mode, only
+    query and read ioctls are allowed.
+
+    Only one open is allowed in ``O_RDWR``. In this mode, all ioctls are
+    allowed.
+
+    When the ``O_NONBLOCK`` flag is given, the system calls may return
+    EAGAIN error code when no data is available or when the device
+    driver is temporarily busy.
+
+    Other flags have no effect.
+
+
+Description
+===========
+
+This system call opens a named frontend device
+(``/dev/dvb/adapter?/frontend?``) for subsequent use. Usually the first
+thing to do after a successful open is to find out the frontend type
+with :ref:`FE_GET_INFO <FE_GET_INFO>`.
+
+The device can be opened in read-only mode, which only allows monitoring
+of device status and statistics, or read/write mode, which allows any
+kind of use (e.g. performing tuning operations.)
+
+In a system with multiple front-ends, it is usually the case that
+multiple devices cannot be open in read/write mode simultaneously. As
+long as a front-end device is opened in read/write mode, other open()
+calls in read/write mode will either fail or block, depending on whether
+non-blocking or blocking mode was specified. A front-end device opened
+in blocking mode can later be put into non-blocking mode (and vice
+versa) using the F_SETFL command of the fcntl system call. This is a
+standard system call, documented in the Linux manual page for fcntl.
+When an open() call has succeeded, the device will be ready for use in
+the specified mode. This implies that the corresponding hardware is
+powered up, and that other front-ends may have been powered down to make
+that possible.
+
+
+Return Value
+============
+
+On success :c:func:`open()` returns the new file descriptor. On error
+-1 is returned, and the ``errno`` variable is set appropriately.
+Possible error codes are:
+
+EACCES
+    The caller has no permission to access the device.
+
+EBUSY
+    The the device driver is already in use.
+
+ENXIO
+    No device corresponding to this device special file exists.
+
+ENOMEM
+    Not enough kernel memory was available to complete the request.
+
+EMFILE
+    The process already has the maximum number of files open.
+
+ENFILE
+    The limit on the total number of files open on the system has been
+    reached.
+
+ENODEV
+    The device got removed.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend_fcalls.rst b/Documentation/linux_tv/media/dvb/frontend_fcalls.rst
new file mode 100644
index 0000000..8eae0e9
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend_fcalls.rst
@@ -0,0 +1,35 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend_fcalls:
+
+#######################
+Frontend Function Calls
+#######################
+
+.. toctree::
+    :maxdepth: 1
+
+    frontend_f_open
+    frontend_f_close
+    fe-get-info
+    fe-read-status
+    fe-get-property
+    fe-diseqc-reset-overload
+    fe-diseqc-send-master-cmd
+    fe-diseqc-recv-slave-reply
+    fe-diseqc-send-burst
+    fe-set-tone
+    fe-set-voltage
+    fe-enable-high-lnb-voltage
+    fe-set-frontend-tune-mode
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend_h.rst b/Documentation/linux_tv/media/dvb/frontend_h.rst
new file mode 100644
index 0000000..3f616c6
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend_h.rst
@@ -0,0 +1,24 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend_h:
+
+************************
+DVB Frontend Header File
+************************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    ../../frontend.h
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend_legacy_api.rst b/Documentation/linux_tv/media/dvb/frontend_legacy_api.rst
new file mode 100644
index 0000000..dcc62d4
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend_legacy_api.rst
@@ -0,0 +1,49 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend_legacy_types:
+
+Frontend Legacy Data Types
+==========================
+
+
+.. toctree::
+    :maxdepth: 1
+
+    fe-type-t
+    fe-bandwidth-t
+    dvb-frontend-parameters
+    dvb-frontend-event
+
+
+.. _frontend_legacy_fcalls:
+
+Frontend Legacy Function Calls
+==============================
+
+Those functions are defined at DVB version 3. The support is kept in the
+kernel due to compatibility issues only. Their usage is strongly not
+recommended
+
+
+.. toctree::
+    :maxdepth: 1
+
+    FE_READ_BER
+    FE_READ_SNR
+    FE_READ_SIGNAL_STRENGTH
+    FE_READ_UNCORRECTED_BLOCKS
+    FE_SET_FRONTEND
+    FE_GET_FRONTEND
+    FE_GET_EVENT
+    FE_DISHNETWORK_SEND_LEGACY_CMD
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/linux_tv/media/dvb/frontend_legacy_dvbv3_api.rst
new file mode 100644
index 0000000..1dbff41
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/frontend_legacy_dvbv3_api.rst
@@ -0,0 +1,29 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _frontend_legacy_dvbv3_api:
+
+****************************************
+DVB Frontend legacy API (a. k. a. DVBv3)
+****************************************
+
+The usage of this API is deprecated, as it doesn't support all digital
+TV standards, doesn't provide good statistics measurements and provides
+incomplete information. This is kept only to support legacy
+applications.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    frontend_legacy_api
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/intro.rst b/Documentation/linux_tv/media/dvb/intro.rst
new file mode 100644
index 0000000..0508f0d
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/intro.rst
@@ -0,0 +1,204 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb_introdution:
+
+************
+Introduction
+************
+
+
+.. _requisites:
+
+What you need to know
+=====================
+
+The reader of this document is required to have some knowledge in the
+area of digital video broadcasting (DVB) and should be familiar with
+part I of the MPEG2 specification ISO/IEC 13818 (aka ITU-T H.222), i.e
+you should know what a program/transport stream (PS/TS) is and what is
+meant by a packetized elementary stream (PES) or an I-frame.
+
+Various DVB standards documents are available from http://www.dvb.org
+and/or http://www.etsi.org.
+
+It is also necessary to know how to access unix/linux devices and how to
+use ioctl calls. This also includes the knowledge of C or C++.
+
+
+.. _history:
+
+History
+=======
+
+The first API for DVB cards we used at Convergence in late 1999 was an
+extension of the Video4Linux API which was primarily developed for frame
+grabber cards. As such it was not really well suited to be used for DVB
+cards and their new features like recording MPEG streams and filtering
+several section and PES data streams at the same time.
+
+In early 2000, we were approached by Nokia with a proposal for a new
+standard Linux DVB API. As a commitment to the development of terminals
+based on open standards, Nokia and Convergence made it available to all
+Linux developers and published it on https://linuxtv.org in September
+2000. Convergence is the maintainer of the Linux DVB API. Together with
+the LinuxTV community (i.e. you, the reader of this document), the Linux
+DVB API will be constantly reviewed and improved. With the Linux driver
+for the Siemens/Hauppauge DVB PCI card Convergence provides a first
+implementation of the Linux DVB API.
+
+
+.. _overview:
+
+Overview
+========
+
+
+.. _stb_components:
+
+.. figure::  intro_files/dvbstb.*
+    :alt:    dvbstb.pdf / dvbstb.png
+    :align:  center
+
+    Components of a DVB card/STB
+
+A DVB PCI card or DVB set-top-box (STB) usually consists of the
+following main hardware components:
+
+-  Frontend consisting of tuner and DVB demodulator
+
+   Here the raw signal reaches the DVB hardware from a satellite dish or
+   antenna or directly from cable. The frontend down-converts and
+   demodulates this signal into an MPEG transport stream (TS). In case
+   of a satellite frontend, this includes a facility for satellite
+   equipment control (SEC), which allows control of LNB polarization,
+   multi feed switches or dish rotors.
+
+-  Conditional Access (CA) hardware like CI adapters and smartcard slots
+
+   The complete TS is passed through the CA hardware. Programs to which
+   the user has access (controlled by the smart card) are decoded in
+   real time and re-inserted into the TS.
+
+-  Demultiplexer which filters the incoming DVB stream
+
+   The demultiplexer splits the TS into its components like audio and
+   video streams. Besides usually several of such audio and video
+   streams it also contains data streams with information about the
+   programs offered in this or other streams of the same provider.
+
+-  MPEG2 audio and video decoder
+
+   The main targets of the demultiplexer are the MPEG2 audio and video
+   decoders. After decoding they pass on the uncompressed audio and
+   video to the computer screen or (through a PAL/NTSC encoder) to a TV
+   set.
+
+:ref:`stb_components` shows a crude schematic of the control and data
+flow between those components.
+
+On a DVB PCI card not all of these have to be present since some
+functionality can be provided by the main CPU of the PC (e.g. MPEG
+picture and sound decoding) or is not needed (e.g. for data-only uses
+like “internet over satellite”). Also not every card or STB provides
+conditional access hardware.
+
+
+.. _dvb_devices:
+
+Linux DVB Devices
+=================
+
+The Linux DVB API lets you control these hardware components through
+currently six Unix-style character devices for video, audio, frontend,
+demux, CA and IP-over-DVB networking. The video and audio devices
+control the MPEG2 decoder hardware, the frontend device the tuner and
+the DVB demodulator. The demux device gives you control over the PES and
+section filters of the hardware. If the hardware does not support
+filtering these filters can be implemented in software. Finally, the CA
+device controls all the conditional access capabilities of the hardware.
+It can depend on the individual security requirements of the platform,
+if and how many of the CA functions are made available to the
+application through this device.
+
+All devices can be found in the ``/dev`` tree under ``/dev/dvb``. The
+individual devices are called:
+
+-  ``/dev/dvb/adapterN/audioM``,
+
+-  ``/dev/dvb/adapterN/videoM``,
+
+-  ``/dev/dvb/adapterN/frontendM``,
+
+-  ``/dev/dvb/adapterN/netM``,
+
+-  ``/dev/dvb/adapterN/demuxM``,
+
+-  ``/dev/dvb/adapterN/dvrM``,
+
+-  ``/dev/dvb/adapterN/caM``,
+
+where N enumerates the DVB PCI cards in a system starting from 0, and M
+enumerates the devices of each type within each adapter, starting
+from 0, too. We will omit the “ ``/dev/dvb/adapterN/``\ ” in the further
+discussion of these devices.
+
+More details about the data structures and function calls of all the
+devices are described in the following chapters.
+
+
+.. _include_files:
+
+API include files
+=================
+
+For each of the DVB devices a corresponding include file exists. The DVB
+API include files should be included in application sources with a
+partial path like:
+
+
+.. code-block:: c
+
+        #include <linux/dvb/audio.h>
+
+
+.. code-block:: c
+
+        #include <linux/dvb/ca.h>
+
+
+.. code-block:: c
+
+        #include <linux/dvb/dmx.h>
+
+
+.. code-block:: c
+
+        #include <linux/dvb/frontend.h>
+
+
+.. code-block:: c
+
+        #include <linux/dvb/net.h>
+
+
+.. code-block:: c
+
+        #include <linux/dvb/osd.h>
+
+
+.. code-block:: c
+
+        #include <linux/dvb/video.h>
+
+To enable applications to support different API version, an additional
+include file ``linux/dvb/version.h`` exists, which defines the constant
+``DVB_API_VERSION``. This document describes ``DVB_API_VERSION 5.10``.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/intro_files/dvbstb.pdf b/Documentation/linux_tv/media/dvb/intro_files/dvbstb.pdf
new file mode 100644
index 0000000..0fa75d9
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/intro_files/dvbstb.pdf
Binary files differ
diff --git a/Documentation/linux_tv/media/dvb/intro_files/dvbstb.png b/Documentation/linux_tv/media/dvb/intro_files/dvbstb.png
new file mode 100644
index 0000000..9b8f372
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/intro_files/dvbstb.png
Binary files differ
diff --git a/Documentation/linux_tv/media/dvb/legacy_dvb_apis.rst b/Documentation/linux_tv/media/dvb/legacy_dvb_apis.rst
new file mode 100644
index 0000000..15e0d88
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/legacy_dvb_apis.rst
@@ -0,0 +1,31 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _legacy_dvb_apis:
+
+*******************
+DVB Deprecated APIs
+*******************
+
+The APIs described here are kept only for historical reasons. There's
+just one driver for a very legacy hardware that uses this API. No modern
+drivers should use it. Instead, audio and video should be using the V4L2
+and ALSA APIs, and the pipelines should be set using the Media
+Controller API
+
+
+.. toctree::
+    :maxdepth: 1
+
+    video
+    audio
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/net.rst b/Documentation/linux_tv/media/dvb/net.rst
new file mode 100644
index 0000000..040ffc7
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/net.rst
@@ -0,0 +1,219 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _net:
+
+###############
+DVB Network API
+###############
+The DVB net device controls the mapping of data packages that are part
+of a transport stream to be mapped into a virtual network interface,
+visible through the standard Linux network protocol stack.
+
+Currently, two encapsulations are supported:
+
+-  `Multi Protocol Encapsulation (MPE) <http://en.wikipedia.org/wiki/Multiprotocol_Encapsulation>`__
+
+-  `Ultra Lightweight Encapsulation (ULE) <http://en.wikipedia.org/wiki/Unidirectional_Lightweight_Encapsulation>`__
+
+In order to create the Linux virtual network interfaces, an application
+needs to tell to the Kernel what are the PIDs and the encapsulation
+types that are present on the transport stream. This is done through
+``/dev/dvb/adapter?/net?`` device node. The data will be available via
+virtual ``dvb?_?`` network interfaces, and will be controlled/routed via
+the standard ip tools (like ip, route, netstat, ifconfig, etc).
+
+Data types and and ioctl definitions are defined via ``linux/dvb/net.h``
+header.
+
+
+.. _net_fcalls:
+
+######################
+DVB net Function Calls
+######################
+
+.. _NET_ADD_IF:
+
+****************
+ioctl NET_ADD_IF
+****************
+
+*man NET_ADD_IF(2)*
+
+Creates a new network interface for a given Packet ID.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, struct dvb_net_if *net_if )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_SET_TONE
+
+``net_if``
+    pointer to struct :ref:`dvb_net_if <dvb-net-if>`
+
+
+Description
+===========
+
+The NET_ADD_IF ioctl system call selects the Packet ID (PID) that
+contains a TCP/IP traffic, the type of encapsulation to be used (MPE or
+ULE) and the interface number for the new interface to be created. When
+the system call successfully returns, a new virtual network interface is
+created.
+
+The struct :ref:`dvb_net_if <dvb-net-if>`::ifnum field will be
+filled with the number of the created interface.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _dvb-net-if-t:
+
+struct dvb_net_if description
+=============================
+
+
+.. _dvb-net-if:
+
+.. flat-table:: struct dvb_net_if
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  pid
+
+       -  Packet ID (PID) of the MPEG-TS that contains data
+
+    -  .. row 3
+
+       -  ifnum
+
+       -  number of the DVB interface.
+
+    -  .. row 4
+
+       -  feedtype
+
+       -  Encapsulation type of the feed. It can be:
+          ``DVB_NET_FEEDTYPE_MPE`` for MPE encoding or
+          ``DVB_NET_FEEDTYPE_ULE`` for ULE encoding.
+
+
+
+.. _NET_REMOVE_IF:
+
+*******************
+ioctl NET_REMOVE_IF
+*******************
+
+*man NET_REMOVE_IF(2)*
+
+Removes a network interface.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, int ifnum )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_SET_TONE
+
+``net_if``
+    number of the interface to be removed
+
+
+Description
+===========
+
+The NET_REMOVE_IF ioctl deletes an interface previously created via
+:ref:`NET_ADD_IF <net>`.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _NET_GET_IF:
+
+****************
+ioctl NET_GET_IF
+****************
+
+*man NET_GET_IF(2)*
+
+Read the configuration data of an interface created via
+:ref:`NET_ADD_IF <net>`.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, int request, struct dvb_net_if *net_if )
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_SET_TONE
+
+``net_if``
+    pointer to struct :ref:`dvb_net_if <dvb-net-if>`
+
+
+Description
+===========
+
+The NET_GET_IF ioctl uses the interface number given by the struct
+:ref:`dvb_net_if <dvb-net-if>`::ifnum field and fills the content of
+struct :ref:`dvb_net_if <dvb-net-if>` with the packet ID and
+encapsulation type used on such interface. If the interface was not
+created yet with :ref:`NET_ADD_IF <net>`, it will return -1 and fill
+the ``errno`` with ``EINVAL`` error code.
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/net_h.rst b/Documentation/linux_tv/media/dvb/net_h.rst
new file mode 100644
index 0000000..357713b
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/net_h.rst
@@ -0,0 +1,24 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _net_h:
+
+***********************
+DVB Network Header File
+***********************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    ../../net.h
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/query-dvb-frontend-info.rst b/Documentation/linux_tv/media/dvb/query-dvb-frontend-info.rst
new file mode 100644
index 0000000..4a4fd5a
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/query-dvb-frontend-info.rst
@@ -0,0 +1,22 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _query-dvb-frontend-info:
+
+*****************************
+Querying frontend information
+*****************************
+
+Usually, the first thing to do when the frontend is opened is to check
+the frontend capabilities. This is done using
+:ref:`FE_GET_INFO <FE_GET_INFO>`. This ioctl will enumerate the
+DVB API version and other characteristics about the frontend, and can be
+opened either in read only or read/write mode.
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/video.rst b/Documentation/linux_tv/media/dvb/video.rst
new file mode 100644
index 0000000..9783e9f
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/video.rst
@@ -0,0 +1,46 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dvb_video:
+
+################
+DVB Video Device
+################
+The DVB video device controls the MPEG2 video decoder of the DVB
+hardware. It can be accessed through **/dev/dvb/adapter0/video0**. Data
+types and and ioctl definitions can be accessed by including
+**linux/dvb/video.h** in your application.
+
+Note that the DVB video device only controls decoding of the MPEG video
+stream, not its presentation on the TV or computer screen. On PCs this
+is typically handled by an associated video4linux device, e.g.
+**/dev/video**, which allows scaling and defining output windows.
+
+Some DVB cards don’t have their own MPEG decoder, which results in the
+omission of the audio and video device as well as the video4linux
+device.
+
+The ioctls that deal with SPUs (sub picture units) and navigation
+packets are only supported on some MPEG decoders made for DVD playback.
+
+These ioctls were also used by V4L2 to control MPEG decoders implemented
+in V4L2. The use of these ioctls for that purpose has been made obsolete
+and proper V4L2 ioctls or controls have been created to replace that
+functionality.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    video_types
+    video_function_calls
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/video_function_calls.rst b/Documentation/linux_tv/media/dvb/video_function_calls.rst
new file mode 100644
index 0000000..3add2b8
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/video_function_calls.rst
@@ -0,0 +1,1880 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _video_function_calls:
+
+********************
+Video Function Calls
+********************
+
+
+.. _video_fopen:
+
+open()
+======
+
+DESCRIPTION
+
+This system call opens a named video device (e.g.
+/dev/dvb/adapter0/video0) for subsequent use.
+
+When an open() call has succeeded, the device will be ready for use. The
+significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the open() call itself. A device opened in
+blocking mode can later be put into non-blocking mode (and vice versa)
+using the F_SETFL command of the fcntl system call. This is a standard
+system call, documented in the Linux manual page for fcntl. Only one
+user can open the Video Device in O_RDWR mode. All other attempts to
+open the device in this mode will fail, and an error-code will be
+returned. If the Video Device is opened in O_RDONLY mode, the only
+ioctl call that can be used is VIDEO_GET_STATUS. All other call will
+return an error code.
+
+SYNOPSIS
+
+int open(const char *deviceName, int flags);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char *deviceName
+
+       -  Name of specific video device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -  
+       -  O_RDONLY read-only access
+
+    -  .. row 4
+
+       -  
+       -  O_RDWR read/write access
+
+    -  .. row 5
+
+       -  
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 6
+
+       -  
+       -  (blocking mode is the default)
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ENODEV
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  EINTERNAL
+
+       -  Internal error.
+
+    -  .. row 3
+
+       -  EBUSY
+
+       -  Device or resource busy.
+
+    -  .. row 4
+
+       -  EINVAL
+
+       -  Invalid argument.
+
+
+
+.. _video_fclose:
+
+close()
+=======
+
+DESCRIPTION
+
+This system call closes a previously opened video device.
+
+SYNOPSIS
+
+int close(int fd);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EBADF
+
+       -  fd is not a valid open file descriptor.
+
+
+
+.. _video_fwrite:
+
+write()
+=======
+
+DESCRIPTION
+
+This system call can only be used if VIDEO_SOURCE_MEMORY is selected
+in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in
+PES format, unless the capability allows other formats. If O_NONBLOCK
+is not specified the function will block until buffer space is
+available. The amount of data to be transferred is implied by count.
+
+SYNOPSIS
+
+size_t write(int fd, const void *buf, size_t count);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void *buf
+
+       -  Pointer to the buffer containing the PES data.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+RETURN VALUE
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EPERM
+
+       -  Mode VIDEO_SOURCE_MEMORY not selected.
+
+    -  .. row 2
+
+       -  ENOMEM
+
+       -  Attempted to write more data than the internal buffer can hold.
+
+    -  .. row 3
+
+       -  EBADF
+
+       -  fd is not a valid open file descriptor.
+
+
+
+.. _VIDEO_STOP:
+
+VIDEO_STOP
+==========
+
+DESCRIPTION
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD <vidioc-decoder-cmd>` instead.
+
+This ioctl call asks the Video Device to stop playing the current
+stream. Depending on the input parameter, the screen can be blanked out
+or displaying the last decoded frame.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_STOP, boolean mode);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_STOP for this command.
+
+    -  .. row 3
+
+       -  Boolean mode
+
+       -  Indicates how the screen shall be handled.
+
+    -  .. row 4
+
+       -  
+       -  TRUE: Blank screen when stop.
+
+    -  .. row 5
+
+       -  
+       -  FALSE: Show last decoded frame.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_PLAY:
+
+VIDEO_PLAY
+==========
+
+DESCRIPTION
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD <vidioc-decoder-cmd>` instead.
+
+This ioctl call asks the Video Device to start playing a video stream
+from the selected source.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_PLAY);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_PLAY for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_FREEZE:
+
+VIDEO_FREEZE
+============
+
+DESCRIPTION
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD <vidioc-decoder-cmd>` instead.
+
+This ioctl call suspends the live video stream being played. Decoding
+and playing are frozen. It is then possible to restart the decoding and
+playing process of the video stream using the VIDEO_CONTINUE command.
+If VIDEO_SOURCE_MEMORY is selected in the ioctl call
+VIDEO_SELECT_SOURCE, the DVB subsystem will not decode any more data
+until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_FREEZE);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_FREEZE for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_CONTINUE:
+
+VIDEO_CONTINUE
+==============
+
+DESCRIPTION
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD <vidioc-decoder-cmd>` instead.
+
+This ioctl call restarts decoding and playing processes of the video
+stream which was played before a call to VIDEO_FREEZE was made.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_CONTINUE);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_CONTINUE for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_SELECT_SOURCE:
+
+VIDEO_SELECT_SOURCE
+===================
+
+DESCRIPTION
+
+This ioctl is for DVB devices only. This ioctl was also supported by the
+V4L2 ivtv driver, but that has been replaced by the ivtv-specific
+``IVTV_IOC_PASSTHROUGH_MODE`` ioctl.
+
+This ioctl call informs the video device which source shall be used for
+the input data. The possible sources are demux or memory. If memory is
+selected, the data is fed to the video device through the write command.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SELECT_SOURCE,
+video_stream_source_t source);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SELECT_SOURCE for this command.
+
+    -  .. row 3
+
+       -  video_stream_source_t source
+
+       -  Indicates which source shall be used for the Video stream.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_SET_BLANK:
+
+VIDEO_SET_BLANK
+===============
+
+DESCRIPTION
+
+This ioctl call asks the Video Device to blank out the picture.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_BLANK, boolean mode);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_BLANK for this command.
+
+    -  .. row 3
+
+       -  boolean mode
+
+       -  TRUE: Blank screen when stop.
+
+    -  .. row 4
+
+       -  
+       -  FALSE: Show last decoded frame.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_GET_STATUS:
+
+VIDEO_GET_STATUS
+================
+
+DESCRIPTION
+
+This ioctl call asks the Video Device to return the current status of
+the device.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_GET_STATUS, struct video_status
+*status);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_STATUS for this command.
+
+    -  .. row 3
+
+       -  struct video_status *status
+
+       -  Returns the current status of the Video Device.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_GET_FRAME_COUNT:
+
+VIDEO_GET_FRAME_COUNT
+=====================
+
+DESCRIPTION
+
+This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
+this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_FRAME``
+control.
+
+This ioctl call asks the Video Device to return the number of displayed
+frames since the decoder was started.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = VIDEO_GET_FRAME_COUNT, __u64 *pts);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_FRAME_COUNT for this command.
+
+    -  .. row 3
+
+       -  __u64 *pts
+
+       -  Returns the number of frames displayed since the decoder was
+          started.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_GET_PTS:
+
+VIDEO_GET_PTS
+=============
+
+DESCRIPTION
+
+This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
+this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_PTS``
+control.
+
+This ioctl call asks the Video Device to return the current PTS
+timestamp.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = VIDEO_GET_PTS, __u64 *pts);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_PTS for this command.
+
+    -  .. row 3
+
+       -  __u64 *pts
+
+       -  Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 /
+          ISO/IEC 13818-1.
+
+          The PTS should belong to the currently played frame if possible,
+          but may also be a value close to it like the PTS of the last
+          decoded frame or the last PTS extracted by the PES parser.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_GET_FRAME_RATE:
+
+VIDEO_GET_FRAME_RATE
+====================
+
+DESCRIPTION
+
+This ioctl call asks the Video Device to return the current framerate.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = VIDEO_GET_FRAME_RATE, unsigned int
+*rate);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_FRAME_RATE for this command.
+
+    -  .. row 3
+
+       -  unsigned int *rate
+
+       -  Returns the framerate in number of frames per 1000 seconds.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_GET_EVENT:
+
+VIDEO_GET_EVENT
+===============
+
+DESCRIPTION
+
+This ioctl is for DVB devices only. To get events from a V4L2 decoder
+use the V4L2 :ref:`VIDIOC_DQEVENT <vidioc-dqevent>` ioctl instead.
+
+This ioctl call returns an event of type video_event if available. If
+an event is not available, the behavior depends on whether the device is
+in blocking or non-blocking mode. In the latter case, the call fails
+immediately with errno set to EWOULDBLOCK. In the former case, the call
+blocks until an event becomes available. The standard Linux poll()
+and/or select() system calls can be used with the device file descriptor
+to watch for new events. For select(), the file descriptor should be
+included in the exceptfds argument, and for poll(), POLLPRI should be
+specified as the wake-up condition. Read-only permissions are sufficient
+for this ioctl call.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_GET_EVENT, struct video_event *ev);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_EVENT for this command.
+
+    -  .. row 3
+
+       -  struct video_event *ev
+
+       -  Points to the location where the event, if any, is to be stored.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EWOULDBLOCK
+
+       -  There is no event pending, and the device is in non-blocking mode.
+
+    -  .. row 2
+
+       -  EOVERFLOW
+
+       -  Overflow in event queue - one or more events were lost.
+
+
+
+.. _VIDEO_COMMAND:
+
+VIDEO_COMMAND
+=============
+
+DESCRIPTION
+
+This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
+this ioctl has been replaced by the
+:ref:`VIDIOC_DECODER_CMD <vidioc-decoder-cmd>` ioctl.
+
+This ioctl commands the decoder. The ``video_command`` struct is a
+subset of the ``v4l2_decoder_cmd`` struct, so refer to the
+:ref:`VIDIOC_DECODER_CMD <vidioc-decoder-cmd>` documentation for
+more information.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = VIDEO_COMMAND, struct video_command
+*cmd);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_COMMAND for this command.
+
+    -  .. row 3
+
+       -  struct video_command *cmd
+
+       -  Commands the decoder.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_TRY_COMMAND:
+
+VIDEO_TRY_COMMAND
+=================
+
+DESCRIPTION
+
+This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
+this ioctl has been replaced by the
+:ref:`VIDIOC_TRY_DECODER_CMD <vidioc-decoder-cmd>` ioctl.
+
+This ioctl tries a decoder command. The ``video_command`` struct is a
+subset of the ``v4l2_decoder_cmd`` struct, so refer to the
+:ref:`VIDIOC_TRY_DECODER_CMD <vidioc-decoder-cmd>` documentation
+for more information.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = VIDEO_TRY_COMMAND, struct
+video_command *cmd);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_TRY_COMMAND for this command.
+
+    -  .. row 3
+
+       -  struct video_command *cmd
+
+       -  Try a decoder command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_GET_SIZE:
+
+VIDEO_GET_SIZE
+==============
+
+DESCRIPTION
+
+This ioctl returns the size and aspect ratio.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = VIDEO_GET_SIZE, video_size_t *size);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_SIZE for this command.
+
+    -  .. row 3
+
+       -  video_size_t *size
+
+       -  Returns the size and aspect ratio.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_SET_DISPLAY_FORMAT:
+
+VIDEO_SET_DISPLAY_FORMAT
+========================
+
+DESCRIPTION
+
+This ioctl call asks the Video Device to select the video format to be
+applied by the MPEG chip on the video.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_DISPLAY_FORMAT,
+video_display_format_t format);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_DISPLAY_FORMAT for this command.
+
+    -  .. row 3
+
+       -  video_display_format_t format
+
+       -  Selects the video format to be used.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_STILLPICTURE:
+
+VIDEO_STILLPICTURE
+==================
+
+DESCRIPTION
+
+This ioctl call asks the Video Device to display a still picture
+(I-frame). The input data shall contain an I-frame. If the pointer is
+NULL, then the current displayed still picture is blanked.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_STILLPICTURE, struct
+video_still_picture *sp);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_STILLPICTURE for this command.
+
+    -  .. row 3
+
+       -  struct video_still_picture *sp
+
+       -  Pointer to a location where an I-frame and size is stored.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_FAST_FORWARD:
+
+VIDEO_FAST_FORWARD
+==================
+
+DESCRIPTION
+
+This ioctl call asks the Video Device to skip decoding of N number of
+I-frames. This call can only be used if VIDEO_SOURCE_MEMORY is
+selected.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_FAST_FORWARD, int nFrames);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_FAST_FORWARD for this command.
+
+    -  .. row 3
+
+       -  int nFrames
+
+       -  The number of frames to skip.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EPERM
+
+       -  Mode VIDEO_SOURCE_MEMORY not selected.
+
+
+
+.. _VIDEO_SLOWMOTION:
+
+VIDEO_SLOWMOTION
+================
+
+DESCRIPTION
+
+This ioctl call asks the video device to repeat decoding frames N number
+of times. This call can only be used if VIDEO_SOURCE_MEMORY is
+selected.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SLOWMOTION, int nFrames);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SLOWMOTION for this command.
+
+    -  .. row 3
+
+       -  int nFrames
+
+       -  The number of times to repeat each frame.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EPERM
+
+       -  Mode VIDEO_SOURCE_MEMORY not selected.
+
+
+
+.. _VIDEO_GET_CAPABILITIES:
+
+VIDEO_GET_CAPABILITIES
+======================
+
+DESCRIPTION
+
+This ioctl call asks the video device about its decoding capabilities.
+On success it returns and integer which has bits set according to the
+defines in section ??.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_GET_CAPABILITIES, unsigned int
+*cap);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_CAPABILITIES for this command.
+
+    -  .. row 3
+
+       -  unsigned int *cap
+
+       -  Pointer to a location where to store the capability information.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_SET_ID:
+
+VIDEO_SET_ID
+============
+
+DESCRIPTION
+
+This ioctl selects which sub-stream is to be decoded if a program or
+system stream is sent to the video device.
+
+SYNOPSIS
+
+int ioctl(int fd, int request = VIDEO_SET_ID, int id);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_ID for this command.
+
+    -  .. row 3
+
+       -  int id
+
+       -  video sub-stream id
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  Invalid sub-stream id.
+
+
+
+.. _VIDEO_CLEAR_BUFFER:
+
+VIDEO_CLEAR_BUFFER
+==================
+
+DESCRIPTION
+
+This ioctl call clears all video buffers in the driver and in the
+decoder hardware.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_CLEAR_BUFFER);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_CLEAR_BUFFER for this command.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_SET_STREAMTYPE:
+
+VIDEO_SET_STREAMTYPE
+====================
+
+DESCRIPTION
+
+This ioctl tells the driver which kind of stream to expect being written
+to it. If this call is not used the default of video PES is used. Some
+drivers might not support this call and always expect PES.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_STREAMTYPE, int type);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_STREAMTYPE for this command.
+
+    -  .. row 3
+
+       -  int type
+
+       -  stream type
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_SET_FORMAT:
+
+VIDEO_SET_FORMAT
+================
+
+DESCRIPTION
+
+This ioctl sets the screen format (aspect ratio) of the connected output
+device (TV) so that the output of the decoder can be adjusted
+accordingly.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_FORMAT, video_format_t
+format);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_FORMAT for this command.
+
+    -  .. row 3
+
+       -  video_format_t format
+
+       -  video format of TV as defined in section ??.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  format is not a valid video format.
+
+
+
+.. _VIDEO_SET_SYSTEM:
+
+VIDEO_SET_SYSTEM
+================
+
+DESCRIPTION
+
+This ioctl sets the television output format. The format (see section
+??) may vary from the color format of the displayed MPEG stream. If the
+hardware is not able to display the requested format the call will
+return an error.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_SYSTEM , video_system_t
+system);
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_FORMAT for this command.
+
+    -  .. row 3
+
+       -  video_system_t system
+
+       -  video system of TV output.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  system is not a valid or supported video system.
+
+
+
+.. _VIDEO_SET_HIGHLIGHT:
+
+VIDEO_SET_HIGHLIGHT
+===================
+
+DESCRIPTION
+
+This ioctl sets the SPU highlight information for the menu access of a
+DVD.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_HIGHLIGHT ,video_highlight_t
+*vhilite)
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_HIGHLIGHT for this command.
+
+    -  .. row 3
+
+       -  video_highlight_t *vhilite
+
+       -  SPU Highlight information according to section ??.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+.. _VIDEO_SET_SPU:
+
+VIDEO_SET_SPU
+=============
+
+DESCRIPTION
+
+This ioctl activates or deactivates SPU decoding in a DVD input stream.
+It can only be used, if the driver is able to handle a DVD stream.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_SPU , video_spu_t *spu)
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_SPU for this command.
+
+    -  .. row 3
+
+       -  video_spu_t *spu
+
+       -  SPU decoding (de)activation and subid setting according to section
+          ??.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  input is not a valid spu setting or driver cannot handle SPU.
+
+
+
+.. _VIDEO_SET_SPU_PALETTE:
+
+VIDEO_SET_SPU_PALETTE
+=====================
+
+DESCRIPTION
+
+This ioctl sets the SPU color palette.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_SPU_PALETTE
+,video_spu_palette_t *palette )
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_SPU_PALETTE for this command.
+
+    -  .. row 3
+
+       -  video_spu_palette_t *palette
+
+       -  SPU palette according to section ??.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  input is not a valid palette or driver doesn’t handle SPU.
+
+
+
+.. _VIDEO_GET_NAVI:
+
+VIDEO_GET_NAVI
+==============
+
+DESCRIPTION
+
+This ioctl returns navigational information from the DVD stream. This is
+especially needed if an encoded stream has to be decoded by the
+hardware.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_GET_NAVI , video_navi_pack_t
+*navipack)
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_GET_NAVI for this command.
+
+    -  .. row 3
+
+       -  video_navi_pack_t *navipack
+
+       -  PCI or DSI pack (private stream 2) according to section ??.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EFAULT
+
+       -  driver is not able to return navigational information
+
+
+
+.. _VIDEO_SET_ATTRIBUTES:
+
+VIDEO_SET_ATTRIBUTES
+====================
+
+DESCRIPTION
+
+This ioctl is intended for DVD playback and allows you to set certain
+information about the stream. Some hardware may not need this
+information, but the call also tells the hardware to prepare for DVD
+playback.
+
+SYNOPSIS
+
+int ioctl(fd, int request = VIDEO_SET_ATTRIBUTE ,video_attributes_t
+vattr)
+
+PARAMETERS
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals VIDEO_SET_ATTRIBUTE for this command.
+
+    -  .. row 3
+
+       -  video_attributes_t vattr
+
+       -  video attributes according to section ??.
+
+
+RETURN VALUE
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  EINVAL
+
+       -  input is not a valid attribute setting.
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/video_h.rst b/Documentation/linux_tv/media/dvb/video_h.rst
new file mode 100644
index 0000000..348d20c
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/video_h.rst
@@ -0,0 +1,24 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _video_h:
+
+*********************
+DVB Video Header File
+*********************
+
+
+.. toctree::
+    :maxdepth: 1
+
+    ../../video.h
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------
diff --git a/Documentation/linux_tv/media/dvb/video_types.rst b/Documentation/linux_tv/media/dvb/video_types.rst
new file mode 100644
index 0000000..f572338
--- /dev/null
+++ b/Documentation/linux_tv/media/dvb/video_types.rst
@@ -0,0 +1,390 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _video_types:
+
+****************
+Video Data Types
+****************
+
+
+.. _video-format-t:
+
+video_format_t
+==============
+
+The ``video_format_t`` data type defined by
+
+
+.. code-block:: c
+
+    typedef enum {
+        VIDEO_FORMAT_4_3,     /* Select 4:3 format */
+        VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
+        VIDEO_FORMAT_221_1    /* 2.21:1 */
+    } video_format_t;
+
+is used in the VIDEO_SET_FORMAT function (??) to tell the driver which
+aspect ratio the output hardware (e.g. TV) has. It is also used in the
+data structures video_status (??) returned by VIDEO_GET_STATUS (??)
+and video_event (??) returned by VIDEO_GET_EVENT (??) which report
+about the display format of the current video stream.
+
+
+.. _video-displayformat-t:
+
+video_displayformat_t
+=====================
+
+In case the display format of the video stream and of the display
+hardware differ the application has to specify how to handle the
+cropping of the picture. This can be done using the
+VIDEO_SET_DISPLAY_FORMAT call (??) which accepts
+
+
+.. code-block:: c
+
+    typedef enum {
+        VIDEO_PAN_SCAN,       /* use pan and scan format */
+        VIDEO_LETTER_BOX,     /* use letterbox format */
+        VIDEO_CENTER_CUT_OUT  /* use center cut out format */
+    } video_displayformat_t;
+
+as argument.
+
+
+.. _video-stream-source-t:
+
+video_stream_source_t
+=====================
+
+The video stream source is set through the VIDEO_SELECT_SOURCE call
+and can take the following values, depending on whether we are replaying
+from an internal (demuxer) or external (user write) source.
+
+
+.. code-block:: c
+
+    typedef enum {
+        VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
+        VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
+                       comes from the user through the write
+                       system call */
+    } video_stream_source_t;
+
+VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the
+frontend or the DVR device) as the source of the video stream. If
+VIDEO_SOURCE_MEMORY is selected the stream comes from the application
+through the **write()** system call.
+
+
+.. _video-play-state-t:
+
+video_play_state_t
+==================
+
+The following values can be returned by the VIDEO_GET_STATUS call
+representing the state of video playback.
+
+
+.. code-block:: c
+
+    typedef enum {
+        VIDEO_STOPPED, /* Video is stopped */
+        VIDEO_PLAYING, /* Video is currently playing */
+        VIDEO_FREEZED  /* Video is freezed */
+    } video_play_state_t;
+
+
+.. _video-command:
+
+struct video_command
+====================
+
+The structure must be zeroed before use by the application This ensures
+it can be extended safely in the future.
+
+
+.. code-block:: c
+
+    struct video_command {
+        __u32 cmd;
+        __u32 flags;
+        union {
+            struct {
+                __u64 pts;
+            } stop;
+
+            struct {
+                /* 0 or 1000 specifies normal speed,
+                   1 specifies forward single stepping,
+                   -1 specifies backward single stepping,
+                   >>1: playback at speed/1000 of the normal speed,
+                   <-1: reverse playback at (-speed/1000) of the normal speed. */
+                __s32 speed;
+                __u32 format;
+            } play;
+
+            struct {
+                __u32 data[16];
+            } raw;
+        };
+    };
+
+
+.. _video-size-t:
+
+video_size_t
+============
+
+
+.. code-block:: c
+
+    typedef struct {
+        int w;
+        int h;
+        video_format_t aspect_ratio;
+    } video_size_t;
+
+
+.. _video-event:
+
+struct video_event
+==================
+
+The following is the structure of a video event as it is returned by the
+VIDEO_GET_EVENT call.
+
+
+.. code-block:: c
+
+    struct video_event {
+        __s32 type;
+    #define VIDEO_EVENT_SIZE_CHANGED    1
+    #define VIDEO_EVENT_FRAME_RATE_CHANGED  2
+    #define VIDEO_EVENT_DECODER_STOPPED     3
+    #define VIDEO_EVENT_VSYNC       4
+        __kernel_time_t timestamp;
+        union {
+            video_size_t size;
+            unsigned int frame_rate;    /* in frames per 1000sec */
+            unsigned char vsync_field;  /* unknown/odd/even/progressive */
+        } u;
+    };
+
+
+.. _video-status:
+
+struct video_status
+===================
+
+The VIDEO_GET_STATUS call returns the following structure informing
+about various states of the playback operation.
+
+
+.. code-block:: c
+
+    struct video_status {
+        int                   video_blank;   /* blank video on freeze? */
+        video_play_state_t    play_state;    /* current state of playback */
+        video_stream_source_t stream_source; /* current source (demux/memory) */
+        video_format_t        video_format;  /* current aspect ratio of stream */
+        video_displayformat_t display_format;/* selected cropping mode */
+    };
+
+If video_blank is set video will be blanked out if the channel is
+changed or if playback is stopped. Otherwise, the last picture will be
+displayed. play_state indicates if the video is currently frozen,
+stopped, or being played back. The stream_source corresponds to the
+seleted source for the video stream. It can come either from the
+demultiplexer or from memory. The video_format indicates the aspect
+ratio (one of 4:3 or 16:9) of the currently played video stream.
+Finally, display_format corresponds to the selected cropping mode in
+case the source video format is not the same as the format of the output
+device.
+
+
+.. _video-still-picture:
+
+struct video_still_picture
+==========================
+
+An I-frame displayed via the VIDEO_STILLPICTURE call is passed on
+within the following structure.
+
+
+.. code-block:: c
+
+    /* pointer to and size of a single iframe in memory */
+    struct video_still_picture {
+        char *iFrame;        /* pointer to a single iframe in memory */
+        int32_t size;
+    };
+
+
+.. _video_caps:
+
+video capabilities
+==================
+
+A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the
+following bits set according to the hardwares capabilities.
+
+
+.. code-block:: c
+
+     /* bit definitions for capabilities: */
+     /* can the hardware decode MPEG1 and/or MPEG2? */
+     #define VIDEO_CAP_MPEG1   1
+     #define VIDEO_CAP_MPEG2   2
+     /* can you send a system and/or program stream to video device?
+        (you still have to open the video and the audio device but only
+         send the stream to the video device) */
+     #define VIDEO_CAP_SYS     4
+     #define VIDEO_CAP_PROG    8
+     /* can the driver also handle SPU, NAVI and CSS encoded data?
+        (CSS API is not present yet) */
+     #define VIDEO_CAP_SPU    16
+     #define VIDEO_CAP_NAVI   32
+     #define VIDEO_CAP_CSS    64
+
+
+.. _video-system:
+
+video_system_t
+==============
+
+A call to VIDEO_SET_SYSTEM sets the desired video system for TV
+output. The following system types can be set:
+
+
+.. code-block:: c
+
+    typedef enum {
+         VIDEO_SYSTEM_PAL,
+         VIDEO_SYSTEM_NTSC,
+         VIDEO_SYSTEM_PALN,
+         VIDEO_SYSTEM_PALNc,
+         VIDEO_SYSTEM_PALM,
+         VIDEO_SYSTEM_NTSC60,
+         VIDEO_SYSTEM_PAL60,
+         VIDEO_SYSTEM_PALM60
+    } video_system_t;
+
+
+.. _video-highlight:
+
+struct video_highlight
+======================
+
+Calling the ioctl VIDEO_SET_HIGHLIGHTS posts the SPU highlight
+information. The call expects the following format for that information:
+
+
+.. code-block:: c
+
+     typedef
+     struct video_highlight {
+         boolean active;      /*    1=show highlight, 0=hide highlight */
+         uint8_t contrast1;   /*    7- 4  Pattern pixel contrast */
+                      /*    3- 0  Background pixel contrast */
+         uint8_t contrast2;   /*    7- 4  Emphasis pixel-2 contrast */
+                      /*    3- 0  Emphasis pixel-1 contrast */
+         uint8_t color1;      /*    7- 4  Pattern pixel color */
+                      /*    3- 0  Background pixel color */
+         uint8_t color2;      /*    7- 4  Emphasis pixel-2 color */
+                      /*    3- 0  Emphasis pixel-1 color */
+         uint32_t ypos;       /*   23-22  auto action mode */
+                      /*   21-12  start y */
+                      /*    9- 0  end y */
+         uint32_t xpos;       /*   23-22  button color number */
+                      /*   21-12  start x */
+                      /*    9- 0  end x */
+     } video_highlight_t;
+
+
+.. _video-spu:
+
+struct video_spu
+================
+
+Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according
+to the following format:
+
+
+.. code-block:: c
+
+     typedef
+     struct video_spu {
+         boolean active;
+         int stream_id;
+     } video_spu_t;
+
+
+.. _video-spu-palette:
+
+struct video_spu_palette
+========================
+
+The following structure is used to set the SPU palette by calling
+VIDEO_SPU_PALETTE:
+
+
+.. code-block:: c
+
+     typedef
+     struct video_spu_palette {
+         int length;
+         uint8_t *palette;
+     } video_spu_palette_t;
+
+
+.. _video-navi-pack:
+
+struct video_navi_pack
+======================
+
+In order to get the navigational data the following structure has to be
+passed to the ioctl VIDEO_GET_NAVI:
+
+
+.. code-block:: c
+
+     typedef
+     struct video_navi_pack {
+         int length;         /* 0 ... 1024 */
+         uint8_t data[1024];
+     } video_navi_pack_t;
+
+
+.. _video-attributes-t:
+
+video_attributes_t
+==================
+
+The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES:
+
+
+.. code-block:: c
+
+     typedef uint16_t video_attributes_t;
+     /*   bits: descr. */
+     /*   15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */
+     /*   13-12 TV system (0=525/60, 1=625/50) */
+     /*   11-10 Aspect ratio (0=4:3, 3=16:9) */
+     /*    9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */
+     /*    7    line 21-1 data present in GOP (1=yes, 0=no) */
+     /*    6    line 21-2 data present in GOP (1=yes, 0=no) */
+     /*    5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */
+     /*    2    source letterboxed (1=yes, 0=no) */
+     /*    0    film/camera mode (0=camera, 1=film (625/50 only)) */
+
+
+
+
+.. ------------------------------------------------------------------------------
+.. This file was automatically converted from DocBook-XML with the dbxml
+.. library (https://github.com/return42/sphkerneldoc). The origin XML comes
+.. from the linux kernel, refer to:
+..
+.. * https://github.com/torvalds/linux/tree/master/Documentation/DocBook
+.. ------------------------------------------------------------------------------