| /* Copyright (c) 2017,2018 The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| |
| /* Stub regulators */ |
| |
| / { |
| apc0_pwrcl_vreg: regulator-pwrcl { |
| compatible = "qcom,stub-regulator"; |
| regulator-name = "apc0_pwrcl_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| }; |
| |
| apc0_l3_vreg: regulator-l3 { |
| compatible = "qcom,stub-regulator"; |
| regulator-name = "apc0_l3_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| }; |
| |
| apc1_perfcl_vreg: regulator-perfcl { |
| compatible = "qcom,stub-regulator"; |
| regulator-name = "apc1_perfcl_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| }; |
| }; |
| |
| &soc { |
| /* RPMh regulators: */ |
| rpmh-regulator-smpa4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpa4"; |
| pm660_s4: regulator-pm660-s4 { |
| regulator-name = "pm660_s4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1808000>; |
| regulator-max-microvolt = <2040000>; |
| qcom,init-voltage = <1808000>; |
| }; |
| }; |
| |
| /* pm660 S5 - VDD_MODEM supply */ |
| rpmh-regulator-modemlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "mss.lvl"; |
| pm660_s5_level: regulator-pm660-s5 { |
| regulator-name = "pm660_s5_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <RPMH_REGULATOR_LEVEL_OFF>; |
| regulator-max-microvolt = <RPMH_REGULATOR_LEVEL_MAX>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpa6"; |
| pm660_s6: regulator-pm660-s6 { |
| regulator-name = "pm660_s6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1224000>; |
| regulator-max-microvolt = <1352000>; |
| qcom,init-voltage = <1224000>; |
| }; |
| }; |
| |
| /* pm660l S1 - VDD_MX supply */ |
| rpmh-regulator-mxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "mx.lvl"; |
| pm660l_s1_level: regulator-pm660l-s1 { |
| regulator-name = "pm660l_s1_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <RPMH_REGULATOR_LEVEL_OFF>; |
| regulator-max-microvolt = <RPMH_REGULATOR_LEVEL_MAX>; |
| }; |
| |
| pm660l_s1_level_ao: regulator-pm660l-s1-level-ao { |
| regulator-name = "pm660l_s1_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <RPMH_REGULATOR_LEVEL_OFF>; |
| regulator-max-microvolt = <RPMH_REGULATOR_LEVEL_MAX>; |
| }; |
| |
| mx_cdev: mx-cdev-lvl { |
| compatible = "qcom,regulator-cooling-device"; |
| regulator-cdev-supply = <&pm660l_s1_level>; |
| regulator-levels = <RPMH_REGULATOR_LEVEL_NOM |
| RPMH_REGULATOR_LEVEL_OFF>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| /* pm660l S2 - VDD_GFX supply */ |
| rpmh-regulator-gfxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "gfx.lvl"; |
| pm660l_s2_level: regulator-pm660l-s2 { |
| regulator-name = "pm660l_s2_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| }; |
| |
| /* pm660l S3 + S4 - VDD_CX supply */ |
| rpmh-regulator-cxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "cx.lvl"; |
| pm660l_s3_level-parent-supply = <&pm660l_s1_level>; |
| pm660l_s3_level_ao-parent-supply = <&pm660l_s1_level_ao>; |
| pm660l_s3_level: regulator-pm660l-s3-level { |
| regulator-name = "pm660l_s3_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| pm660l_s3_level_ao: regulator-pm660l-s3-level-ao { |
| regulator-name = "pm660l_s3_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| cx_cdev: regulator-cdev { |
| compatible = "qcom,rpmh-reg-cdev"; |
| mboxes = <&qmp_aop 0>; |
| qcom,reg-resource-name = "cx"; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa1"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm660_l1>; |
| pm660_l1: regulator-pm660-l1 { |
| regulator-name = "pm660_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1250000>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <43600>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa2"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l2: regulator-pm660-l2 { |
| regulator-name = "pm660_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| qcom,init-voltage = <1000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa3"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l3: regulator-pm660-l3 { |
| regulator-name = "pm660_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| qcom,init-voltage = <1000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa5"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l5: regulator-pm660-l5 { |
| regulator-name = "pm660_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| qcom,init-voltage = <800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa6"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| pm660_l6: regulator-pm660-l6 { |
| regulator-name = "pm660_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1248000>; |
| regulator-max-microvolt = <1304000>; |
| qcom,init-voltage = <1248000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa7"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l7: regulator-pm660-l7 { |
| regulator-name = "pm660_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa8"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l8: regulator-pm660-l8 { |
| regulator-name = "pm660_l8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa9"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| pm660_l9: regulator-pm660-l9 { |
| regulator-name = "pm660_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa10"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l10: regulator-pm660-l10 { |
| regulator-name = "pm660_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa11"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm660_l11>; |
| pm660_l11: regulator-pm660-l11 { |
| regulator-name = "pm660_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <115000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa12"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l12: regulator-pm660-l12 { |
| regulator-name = "pm660_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa13 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa13"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l13: regulator-pm660-l13 { |
| regulator-name = "pm660_l13"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa14 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa14"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l14: regulator-pm660-l14 { |
| regulator-name = "pm660_l14"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa15 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa15"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l15: regulator-pm660-l15 { |
| regulator-name = "pm660_l15"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa16 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa16"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l16: regulator-pm660-l16 { |
| regulator-name = "pm660_l16"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| qcom,init-voltage = <2700000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa17 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa17"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660_l17: regulator-pm660-l17 { |
| regulator-name = "pm660_l17"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa19 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa19"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| pm660_l19: regulator-pm660-l19 { |
| regulator-name = "pm660_l19"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <3000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldob1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldob1"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm660l_l1>; |
| pm660l_l1: regulator-pm660l-l1 { |
| regulator-name = "pm660l_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <900000>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <72000>; |
| qcom,init-voltage = <880000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldob2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldob2"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660l_l2: regulator-pm660l-l2 { |
| regulator-name = "pm660l_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldob3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldob3"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660l_l3: regulator-pm660l-l3 { |
| regulator-name = "pm660l_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3008000>; |
| qcom,init-voltage = <2850000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldob4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldob4"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660l_l4: regulator-pm660l-l4 { |
| regulator-name = "pm660l_l4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2960000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <2960000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldob5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldob5"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660l_l5: regulator-pm660l-l5 { |
| regulator-name = "pm660l_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2960000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <2960000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldob6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldob6"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660l_l6: regulator-pm660l-l6 { |
| regulator-name = "pm660l_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <3008000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldob7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldob7"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660l_l7: regulator-pm660l-l7 { |
| regulator-name = "pm660l_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3088000>; |
| regulator-max-microvolt = <3100000>; |
| qcom,init-voltage = <3088000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldob8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldob8"; |
| qcom,regulator-type = "pmic4-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| pm660l_l8: regulator-pm660l-l8 { |
| regulator-name = "pm660l_l8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <3300000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* pm660l L9 = VDD_LPI_CX supply */ |
| rpmh-regulator-lcxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "lcx.lvl"; |
| pm660l_l9_level: regulator-pm660l-l9-level { |
| regulator-name = "pm660l_l9_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <RPMH_REGULATOR_LEVEL_OFF>; |
| regulator-max-microvolt = <RPMH_REGULATOR_LEVEL_MAX>; |
| }; |
| }; |
| |
| /* pm660l L10 = VDD_LPI_MX supply */ |
| rpmh-regulator-lmxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "lmx.lvl"; |
| pm660l_l10_level: regulator-pm660l-l10-level { |
| regulator-name = "pm660l_l10_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <RPMH_REGULATOR_LEVEL_OFF>; |
| regulator-max-microvolt = <RPMH_REGULATOR_LEVEL_MAX>; |
| }; |
| }; |
| |
| rpmh-regulator-bobb1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "bobb1"; |
| pm660l_bob: regulator-pm660l-bob { |
| regulator-name = "pm660l_bob"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3312000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <3312000>; |
| }; |
| }; |
| |
| refgen: refgen-regulator@ff1000 { |
| compatible = "qcom,refgen-regulator"; |
| reg = <0xff1000 0x60>; |
| regulator-name = "refgen"; |
| regulator-enable-ramp-delay = <5>; |
| proxy-supply = <&refgen>; |
| qcom,proxy-consumer-enable; |
| }; |
| }; |