V4L/DVB: vpfe_capture: Create separate Kconfig file for davinci devices
Currently VPFE Capture driver and DM6446 CCDC driver is being
reused for AM3517. So this patch is preparing the Kconfig/makefile
for re-use of such IP's.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 686fa7a..280e76a 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -571,66 +571,7 @@
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
-config VIDEO_VPSS_SYSTEM
- tristate "VPSS System module driver"
- depends on ARCH_DAVINCI
- help
- Support for vpss system module for video driver
-
-config VIDEO_VPFE_CAPTURE
- tristate "VPFE Video Capture Driver"
- depends on VIDEO_V4L2 && ARCH_DAVINCI
- select VIDEOBUF_DMA_CONTIG
- help
- Support for DMXXXX VPFE based frame grabber. This is the
- common V4L2 module for following DMXXX SoCs from Texas
- Instruments:- DM6446 & DM355.
-
- To compile this driver as a module, choose M here: the
- module will be called vpfe-capture.
-
-config VIDEO_DM6446_CCDC
- tristate "DM6446 CCDC HW module"
- depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
- select VIDEO_VPSS_SYSTEM
- default y
- help
- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
- with decoder modules such as TVP5146 over BT656 or
- sensor module such as MT9T001 over a raw interface. This
- module configures the interface and CCDC/ISIF to do
- video frame capture from slave decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called vpfe.
-
-config VIDEO_DM355_CCDC
- tristate "DM355 CCDC HW module"
- depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
- select VIDEO_VPSS_SYSTEM
- default y
- help
- Enables DM355 CCD hw module. DM355 CCDC hw interfaces
- with decoder modules such as TVP5146 over BT656 or
- sensor module such as MT9T001 over a raw interface. This
- module configures the interface and CCDC/ISIF to do
- video frame capture from a slave decoders
-
- To compile this driver as a module, choose M here: the
- module will be called vpfe.
-
-config VIDEO_ISIF
- tristate "ISIF HW module"
- depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
- select VIDEO_VPSS_SYSTEM
- default y
- help
- Enables ISIF hw module. This is the hardware module for
- configuring ISIF in VPFE to capture Raw Bayer RGB data from
- a image sensor or YUV data from a YUV source.
-
- To compile this driver as a module, choose M here: the
- module will be called vpfe.
+source "drivers/media/video/davinci/Kconfig"
source "drivers/media/video/omap/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2beb4e4..ed370a9 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -172,7 +172,7 @@
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
+obj-y += davinci/
obj-$(CONFIG_ARCH_OMAP) += omap/
diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
new file mode 100644
index 0000000..6b19540
--- /dev/null
+++ b/drivers/media/video/davinci/Kconfig
@@ -0,0 +1,93 @@
+config DISPLAY_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Display"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ select VIDEO_ADV7343
+ select VIDEO_THS7303
+ help
+ Support for DM6467 based display device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Capture"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ help
+ Support for DM6467 based capture device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+ tristate "DaVinci VPIF Driver"
+ depends on DISPLAY_DAVINCI_DM646X_EVM
+ help
+ Support for DaVinci VPIF Driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif.
+
+config VIDEO_VPSS_SYSTEM
+ tristate "VPSS System module driver"
+ depends on ARCH_DAVINCI
+ help
+ Support for vpss system module for video driver
+
+config VIDEO_VPFE_CAPTURE
+ tristate "VPFE Video Capture Driver"
+ depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Support for DMx/AMx VPFE based frame grabber. This is the
+ common V4L2 module for following DMx/AMx SoCs from Texas
+ Instruments:- DM6446, DM365, DM355 & AM3517/05.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+ tristate "DM6446 CCDC HW module"
+ depends on VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from slave decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+ tristate "DM355 CCDC HW module"
+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from a slave decoders
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_ISIF
+ tristate "ISIF HW module"
+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables ISIF hw module. This is the hardware module for
+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
+ a image sensor or YUV data from a YUV source.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.