MIPS: PCI: Scan busses when they are registered
The patch below changes register_pci_controller() such that controllers
being added after pcibios_init() has run are be scanned immediately.
This is needed for example by the BCM47xx PCI controller, which is located
on the SSB bus, which is now initialized after the PCI subsystem.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index c7fe6ec..a377e9d 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -34,6 +34,8 @@
unsigned long PCIBIOS_MIN_IO = 0x0000;
unsigned long PCIBIOS_MIN_MEM = 0;
+static int pci_initialized;
+
/*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
@@ -74,6 +76,42 @@
res->start = start;
}
+static void __devinit pcibios_scanbus(struct pci_controller *hose)
+{
+ static int next_busno;
+ static int need_domain_info;
+ struct pci_bus *bus;
+
+ if (!hose->iommu)
+ PCI_DMA_BUS_IS_PHYS = 1;
+
+ if (hose->get_busno && pci_probe_only)
+ next_busno = (*hose->get_busno)();
+
+ bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || hose->index;
+ hose->need_domain_info = need_domain_info;
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
+
+ if (!pci_probe_only) {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ pci_enable_bridges(bus);
+ }
+ }
+}
+
+static DEFINE_MUTEX(pci_scan_mutex);
+
void __devinit register_pci_controller(struct pci_controller *hose)
{
if (request_resource(&iomem_resource, hose->mem_resource) < 0)
@@ -93,6 +131,17 @@
printk(KERN_WARNING
"registering PCI controller with io_map_base unset\n");
}
+
+ /*
+ * Scan the bus if it is register after the PCI subsystem
+ * initialization.
+ */
+ if (pci_initialized) {
+ mutex_lock(&pci_scan_mutex);
+ pcibios_scanbus(hose);
+ mutex_unlock(&pci_scan_mutex);
+ }
+
return;
out:
@@ -125,38 +174,15 @@
static int __init pcibios_init(void)
{
struct pci_controller *hose;
- struct pci_bus *bus;
- int next_busno;
- int need_domain_info = 0;
/* Scan all of the recorded PCI controllers. */
- for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
+ for (hose = hose_head; hose; hose = hose->next)
+ pcibios_scanbus(hose);
- if (!hose->iommu)
- PCI_DMA_BUS_IS_PHYS = 1;
-
- if (hose->get_busno && pci_probe_only)
- next_busno = (*hose->get_busno)();
-
- bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
- hose->bus = bus;
- need_domain_info = need_domain_info || hose->index;
- hose->need_domain_info = need_domain_info;
- if (bus) {
- next_busno = bus->subordinate + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
- }
- }
-
- if (!pci_probe_only)
- pci_assign_unassigned_resources();
pci_fixup_irqs(common_swizzle, pcibios_map_irq);
+ pci_initialized = 1;
+
return 0;
}