[ARM] pxa: Palm Tungsten E2 basic support
This contains support for keypad, MMC, AC97, LCD and backlight.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
new file mode 100644
index 0000000..e0dc655
--- /dev/null
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -0,0 +1,278 @@
+/*
+ * Hardware definitions for Palm Tungsten|E2
+ *
+ * Author:
+ * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmte2.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmte2_pin_config[] __initdata = {
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO10_GPIO, /* SD detect */
+ GPIO55_GPIO, /* SD power */
+ GPIO51_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* GPIO KEYS */
+ GPIO5_GPIO, /* notes */
+ GPIO7_GPIO, /* tasks */
+ GPIO11_GPIO, /* calendar */
+ GPIO13_GPIO, /* contacts */
+ GPIO14_GPIO, /* center */
+ GPIO19_GPIO, /* left */
+ GPIO20_GPIO, /* right */
+ GPIO21_GPIO, /* down */
+ GPIO22_GPIO, /* up */
+
+ /* MISC */
+ GPIO1_RST, /* reset */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmte2_mci_init(struct device *dev,
+ irq_handler_t palmte2_detect_int, void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
+ palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMTE2_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmte2_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
+ gpio_free(GPIO_NR_PALMTE2_SD_POWER);
+ free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
+}
+
+static void palmte2_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmte2_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmte2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmte2_mci_power,
+ .get_ro = palmte2_mci_get_ro,
+ .init = palmte2_mci_init,
+ .exit = palmte2_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmte2_pxa_buttons[] = {
+ {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" },
+ {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" },
+ {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" },
+ {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" },
+ {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" },
+ {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" },
+ {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" },
+ {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" },
+ {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" },
+};
+
+static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
+ .buttons = palmte2_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons),
+};
+
+static struct platform_device palmte2_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static struct platform_pwm_backlight_data palmte2_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMTE2_MAX_INTENSITY,
+ .dft_brightness = PALMTE2_MAX_INTENSITY,
+ .pwm_period_ns = PALMTE2_PERIOD_NS,
+};
+
+static struct platform_device palmte2_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm0.dev,
+ .platform_data = &palmte2_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmte2_lcd_modes[] = {
+{
+ .pixclock = 77757,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 28,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmte2_lcd_screen = {
+ .modes = palmte2_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmte2_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmte2_pxa_keys,
+#endif
+ &palmte2_backlight,
+};
+
+static void __init palmte2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
+
+ set_pxa_fb_info(&palmte2_lcd_screen);
+ pxa_set_mci_info(&palmte2_mci_platform_data);
+ pxa_set_ac97_info(NULL);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTE2, "Palm Tungsten|E2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmte2_init
+MACHINE_END