| /* |
| * linux/arch/arm/mach-omap2/clock.c |
| * |
| * Copyright (C) 2005 Texas Instruments Inc. |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Created for OMAP2. |
| * |
| * Cleaned up and modified to use omap shared clock framework by |
| * Tony Lindgren <tony@atomide.com> |
| * |
| * Copyright (C) 2007 Texas Instruments, Inc. |
| * Copyright (C) 2007 Nokia Corporation |
| * Paul Walmsley |
| * |
| * Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation |
| * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #undef DEBUG |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/list.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <asm/bitops.h> |
| |
| #include <asm/io.h> |
| |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sram.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/div64.h> |
| |
| #include "memory.h" |
| #include "sdrc.h" |
| #include "clock.h" |
| #include "prm.h" |
| #include "prm-regbits-24xx.h" |
| #include "cm.h" |
| #include "cm-regbits-24xx.h" |
| #include "cm-regbits-34xx.h" |
| |
| #define MAX_CLOCK_ENABLE_WAIT 100000 |
| |
| u8 cpu_mask; |
| |
| /*------------------------------------------------------------------------- |
| * Omap2 specific clock functions |
| *-------------------------------------------------------------------------*/ |
| |
| /** |
| * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware |
| * @clk: OMAP clock struct ptr to use |
| * |
| * Given a pointer to a source-selectable struct clk, read the hardware |
| * register and determine what its parent is currently set to. Update the |
| * clk->parent field with the appropriate clk ptr. |
| */ |
| void omap2_init_clksel_parent(struct clk *clk) |
| { |
| const struct clksel *clks; |
| const struct clksel_rate *clkr; |
| u32 r, found = 0; |
| |
| if (!clk->clksel) |
| return; |
| |
| r = __raw_readl(clk->clksel_reg) & clk->clksel_mask; |
| r >>= __ffs(clk->clksel_mask); |
| |
| for (clks = clk->clksel; clks->parent && !found; clks++) { |
| for (clkr = clks->rates; clkr->div && !found; clkr++) { |
| if ((clkr->flags & cpu_mask) && (clkr->val == r)) { |
| if (clk->parent != clks->parent) { |
| pr_debug("clock: inited %s parent " |
| "to %s (was %s)\n", |
| clk->name, clks->parent->name, |
| ((clk->parent) ? |
| clk->parent->name : "NULL")); |
| clk->parent = clks->parent; |
| }; |
| found = 1; |
| } |
| } |
| } |
| |
| if (!found) |
| printk(KERN_ERR "clock: init parent: could not find " |
| "regval %0x for clock %s\n", r, clk->name); |
| |
| return; |
| } |
| |
| /* Returns the DPLL rate */ |
| u32 omap2_get_dpll_rate(struct clk *clk) |
| { |
| long long dpll_clk; |
| u32 dpll_mult, dpll_div, dpll; |
| const struct dpll_data *dd; |
| |
| dd = clk->dpll_data; |
| /* REVISIT: What do we return on error? */ |
| if (!dd) |
| return 0; |
| |
| dpll = __raw_readl(dd->mult_div1_reg); |
| dpll_mult = dpll & dd->mult_mask; |
| dpll_mult >>= __ffs(dd->mult_mask); |
| dpll_div = dpll & dd->div1_mask; |
| dpll_div >>= __ffs(dd->div1_mask); |
| |
| dpll_clk = (long long)clk->parent->rate * dpll_mult; |
| do_div(dpll_clk, dpll_div + 1); |
| |
| /* 34XX only */ |
| if (dd->div2_reg) { |
| dpll = __raw_readl(dd->div2_reg); |
| dpll_div = dpll & dd->div2_mask; |
| dpll_div >>= __fss(dd->div2_mask); |
| do_div(dpll_clk, dpll_div + 1); |
| } |
| |
| return dpll_clk; |
| } |
| |
| /* |
| * Used for clocks that have the same value as the parent clock, |
| * divided by some factor |
| */ |
| void omap2_fixed_divisor_recalc(struct clk *clk) |
| { |
| WARN_ON(!clk->fixed_div); |
| |
| clk->rate = clk->parent->rate / clk->fixed_div; |
| |
| if (clk->flags & RATE_PROPAGATES) |
| propagate_rate(clk); |
| } |
| |
| /** |
| * omap2_wait_clock_ready - wait for clock to enable |
| * @reg: physical address of clock IDLEST register |
| * @mask: value to mask against to determine if the clock is active |
| * @name: name of the clock (for printk) |
| * |
| * Returns 1 if the clock enabled in time, or 0 if it failed to enable |
| * in roughly MAX_CLOCK_ENABLE_WAIT microseconds. |
| */ |
| int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) |
| { |
| int i = 0; |
| int ena = 0; |
| |
| /* |
| * 24xx uses 0 to indicate not ready, and 1 to indicate ready. |
| * 34xx reverses this, just to keep us on our toes |
| */ |
| if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) { |
| ena = mask; |
| } else if (cpu_mask & RATE_IN_343X) { |
| ena = 0; |
| } |
| |
| /* Wait for lock */ |
| while (((__raw_readl(reg) & mask) != ena) && |
| (i++ < MAX_CLOCK_ENABLE_WAIT)) { |
| udelay(1); |
| } |
| |
| if (i < MAX_CLOCK_ENABLE_WAIT) |
| pr_debug("Clock %s stable after %d loops\n", name, i); |
| else |
| printk(KERN_ERR "Clock %s didn't enable in %d tries\n", |
| name, MAX_CLOCK_ENABLE_WAIT); |
| |
| |
| return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0; |
| }; |
| |
| |
| /* |
| * Note: We don't need special code here for INVERT_ENABLE |
| * for the time being since INVERT_ENABLE only applies to clocks enabled by |
| * CM_CLKEN_PLL |
| */ |
| static void omap2_clk_wait_ready(struct clk *clk) |
| { |
| void __iomem *reg, *other_reg, *st_reg; |
| u32 bit; |
| |
| /* |
| * REVISIT: This code is pretty ugly. It would be nice to generalize |
| * it and pull it into struct clk itself somehow. |
| */ |
| reg = clk->enable_reg; |
| if ((((u32)reg & 0xff) >= CM_FCLKEN1) && |
| (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2)) |
| other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */ |
| else if ((((u32)reg & 0xff) >= CM_ICLKEN1) && |
| (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4)) |
| other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */ |
| else |
| return; |
| |
| /* REVISIT: What are the appropriate exclusions for 34XX? */ |
| /* No check for DSS or cam clocks */ |
| if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */ |
| if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT || |
| clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT || |
| clk->enable_bit == OMAP24XX_EN_CAM_SHIFT) |
| return; |
| } |
| |
| /* REVISIT: What are the appropriate exclusions for 34XX? */ |
| /* OMAP3: ignore DSS-mod clocks */ |
| if (cpu_is_omap34xx() && |
| (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0))) |
| return; |
| |
| /* Check if both functional and interface clocks |
| * are running. */ |
| bit = 1 << clk->enable_bit; |
| if (!(__raw_readl(other_reg) & bit)) |
| return; |
| st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */ |
| |
| omap2_wait_clock_ready(st_reg, bit, clk->name); |
| } |
| |
| /* Enables clock without considering parent dependencies or use count |
| * REVISIT: Maybe change this to use clk->enable like on omap1? |
| */ |
| int _omap2_clk_enable(struct clk *clk) |
| { |
| u32 regval32; |
| |
| if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) |
| return 0; |
| |
| if (clk->enable) |
| return clk->enable(clk); |
| |
| if (unlikely(clk->enable_reg == 0)) { |
| printk(KERN_ERR "clock.c: Enable for %s without enable code\n", |
| clk->name); |
| return 0; /* REVISIT: -EINVAL */ |
| } |
| |
| regval32 = __raw_readl(clk->enable_reg); |
| if (clk->flags & INVERT_ENABLE) |
| regval32 &= ~(1 << clk->enable_bit); |
| else |
| regval32 |= (1 << clk->enable_bit); |
| __raw_writel(regval32, clk->enable_reg); |
| wmb(); |
| |
| omap2_clk_wait_ready(clk); |
| |
| return 0; |
| } |
| |
| /* Disables clock without considering parent dependencies or use count */ |
| void _omap2_clk_disable(struct clk *clk) |
| { |
| u32 regval32; |
| |
| if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) |
| return; |
| |
| if (clk->disable) { |
| clk->disable(clk); |
| return; |
| } |
| |
| if (clk->enable_reg == 0) { |
| /* |
| * 'Independent' here refers to a clock which is not |
| * controlled by its parent. |
| */ |
| printk(KERN_ERR "clock: clk_disable called on independent " |
| "clock %s which has no enable_reg\n", clk->name); |
| return; |
| } |
| |
| regval32 = __raw_readl(clk->enable_reg); |
| if (clk->flags & INVERT_ENABLE) |
| regval32 |= (1 << clk->enable_bit); |
| else |
| regval32 &= ~(1 << clk->enable_bit); |
| __raw_writel(regval32, clk->enable_reg); |
| wmb(); |
| } |
| |
| void omap2_clk_disable(struct clk *clk) |
| { |
| if (clk->usecount > 0 && !(--clk->usecount)) { |
| _omap2_clk_disable(clk); |
| if (likely((u32)clk->parent)) |
| omap2_clk_disable(clk->parent); |
| } |
| } |
| |
| int omap2_clk_enable(struct clk *clk) |
| { |
| int ret = 0; |
| |
| if (clk->usecount++ == 0) { |
| if (likely((u32)clk->parent)) |
| ret = omap2_clk_enable(clk->parent); |
| |
| if (unlikely(ret != 0)) { |
| clk->usecount--; |
| return ret; |
| } |
| |
| ret = _omap2_clk_enable(clk); |
| |
| if (unlikely(ret != 0) && clk->parent) { |
| omap2_clk_disable(clk->parent); |
| clk->usecount--; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Used for clocks that are part of CLKSEL_xyz governed clocks. |
| * REVISIT: Maybe change to use clk->enable() functions like on omap1? |
| */ |
| void omap2_clksel_recalc(struct clk *clk) |
| { |
| u32 div = 0; |
| |
| pr_debug("clock: recalc'ing clksel clk %s\n", clk->name); |
| |
| div = omap2_clksel_get_divisor(clk); |
| if (div == 0) |
| return; |
| |
| if (unlikely(clk->rate == clk->parent->rate / div)) |
| return; |
| clk->rate = clk->parent->rate / div; |
| |
| pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div); |
| |
| if (unlikely(clk->flags & RATE_PROPAGATES)) |
| propagate_rate(clk); |
| } |
| |
| /** |
| * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent |
| * @clk: OMAP struct clk ptr to inspect |
| * @src_clk: OMAP struct clk ptr of the parent clk to search for |
| * |
| * Scan the struct clksel array associated with the clock to find |
| * the element associated with the supplied parent clock address. |
| * Returns a pointer to the struct clksel on success or NULL on error. |
| */ |
| const struct clksel *omap2_get_clksel_by_parent(struct clk *clk, |
| struct clk *src_clk) |
| { |
| const struct clksel *clks; |
| |
| if (!clk->clksel) |
| return NULL; |
| |
| for (clks = clk->clksel; clks->parent; clks++) { |
| if (clks->parent == src_clk) |
| break; /* Found the requested parent */ |
| } |
| |
| if (!clks->parent) { |
| printk(KERN_ERR "clock: Could not find parent clock %s in " |
| "clksel array of clock %s\n", src_clk->name, |
| clk->name); |
| return NULL; |
| } |
| |
| return clks; |
| } |
| |
| /** |
| * omap2_clksel_round_rate_div - find divisor for the given clock and rate |
| * @clk: OMAP struct clk to use |
| * @target_rate: desired clock rate |
| * @new_div: ptr to where we should store the divisor |
| * |
| * Finds 'best' divider value in an array based on the source and target |
| * rates. The divider array must be sorted with smallest divider first. |
| * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, |
| * they are only settable as part of virtual_prcm set. |
| * |
| * Returns the rounded clock rate or returns 0xffffffff on error. |
| */ |
| u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, |
| u32 *new_div) |
| { |
| unsigned long test_rate; |
| const struct clksel *clks; |
| const struct clksel_rate *clkr; |
| u32 last_div = 0; |
| |
| printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n", |
| clk->name, target_rate); |
| |
| *new_div = 1; |
| |
| clks = omap2_get_clksel_by_parent(clk, clk->parent); |
| if (clks == NULL) |
| return ~0; |
| |
| for (clkr = clks->rates; clkr->div; clkr++) { |
| if (!(clkr->flags & cpu_mask)) |
| continue; |
| |
| /* Sanity check */ |
| if (clkr->div <= last_div) |
| printk(KERN_ERR "clock: clksel_rate table not sorted " |
| "for clock %s", clk->name); |
| |
| last_div = clkr->div; |
| |
| test_rate = clk->parent->rate / clkr->div; |
| |
| if (test_rate <= target_rate) |
| break; /* found it */ |
| } |
| |
| if (!clkr->div) { |
| printk(KERN_ERR "clock: Could not find divisor for target " |
| "rate %ld for clock %s parent %s\n", target_rate, |
| clk->name, clk->parent->name); |
| return ~0; |
| } |
| |
| *new_div = clkr->div; |
| |
| printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div, |
| (clk->parent->rate / clkr->div)); |
| |
| return (clk->parent->rate / clkr->div); |
| } |
| |
| /** |
| * omap2_clksel_round_rate - find rounded rate for the given clock and rate |
| * @clk: OMAP struct clk to use |
| * @target_rate: desired clock rate |
| * |
| * Compatibility wrapper for OMAP clock framework |
| * Finds best target rate based on the source clock and possible dividers. |
| * rates. The divider array must be sorted with smallest divider first. |
| * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, |
| * they are only settable as part of virtual_prcm set. |
| * |
| * Returns the rounded clock rate or returns 0xffffffff on error. |
| */ |
| long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) |
| { |
| u32 new_div; |
| |
| return omap2_clksel_round_rate_div(clk, target_rate, &new_div); |
| } |
| |
| |
| /* Given a clock and a rate apply a clock specific rounding function */ |
| long omap2_clk_round_rate(struct clk *clk, unsigned long rate) |
| { |
| if (clk->round_rate != 0) |
| return clk->round_rate(clk, rate); |
| |
| if (clk->flags & RATE_FIXED) |
| printk(KERN_ERR "clock: generic omap2_clk_round_rate called " |
| "on fixed-rate clock %s\n", clk->name); |
| |
| return clk->rate; |
| } |
| |
| /** |
| * omap2_clksel_to_divisor() - turn clksel field value into integer divider |
| * @clk: OMAP struct clk to use |
| * @field_val: register field value to find |
| * |
| * Given a struct clk of a rate-selectable clksel clock, and a register field |
| * value to search for, find the corresponding clock divisor. The register |
| * field value should be pre-masked and shifted down so the LSB is at bit 0 |
| * before calling. Returns 0 on error |
| */ |
| u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val) |
| { |
| const struct clksel *clks; |
| const struct clksel_rate *clkr; |
| |
| clks = omap2_get_clksel_by_parent(clk, clk->parent); |
| if (clks == NULL) |
| return 0; |
| |
| for (clkr = clks->rates; clkr->div; clkr++) { |
| if ((clkr->flags & cpu_mask) && (clkr->val == field_val)) |
| break; |
| } |
| |
| if (!clkr->div) { |
| printk(KERN_ERR "clock: Could not find fieldval %d for " |
| "clock %s parent %s\n", field_val, clk->name, |
| clk->parent->name); |
| return 0; |
| } |
| |
| return clkr->div; |
| } |
| |
| /** |
| * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value |
| * @clk: OMAP struct clk to use |
| * @div: integer divisor to search for |
| * |
| * Given a struct clk of a rate-selectable clksel clock, and a clock divisor, |
| * find the corresponding register field value. The return register value is |
| * the value before left-shifting. Returns 0xffffffff on error |
| */ |
| u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) |
| { |
| const struct clksel *clks; |
| const struct clksel_rate *clkr; |
| |
| /* should never happen */ |
| WARN_ON(div == 0); |
| |
| clks = omap2_get_clksel_by_parent(clk, clk->parent); |
| if (clks == NULL) |
| return 0; |
| |
| for (clkr = clks->rates; clkr->div; clkr++) { |
| if ((clkr->flags & cpu_mask) && (clkr->div == div)) |
| break; |
| } |
| |
| if (!clkr->div) { |
| printk(KERN_ERR "clock: Could not find divisor %d for " |
| "clock %s parent %s\n", div, clk->name, |
| clk->parent->name); |
| return 0; |
| } |
| |
| return clkr->val; |
| } |
| |
| /** |
| * omap2_get_clksel - find clksel register addr & field mask for a clk |
| * @clk: struct clk to use |
| * @field_mask: ptr to u32 to store the register field mask |
| * |
| * Returns the address of the clksel register upon success or NULL on error. |
| */ |
| void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) |
| { |
| if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0))) |
| return NULL; |
| |
| *field_mask = clk->clksel_mask; |
| |
| return clk->clksel_reg; |
| } |
| |
| /** |
| * omap2_clksel_get_divisor - get current divider applied to parent clock. |
| * @clk: OMAP struct clk to use. |
| * |
| * Returns the integer divisor upon success or 0 on error. |
| */ |
| u32 omap2_clksel_get_divisor(struct clk *clk) |
| { |
| u32 field_mask, field_val; |
| void __iomem *div_addr; |
| |
| div_addr = omap2_get_clksel(clk, &field_mask); |
| if (div_addr == 0) |
| return 0; |
| |
| field_val = __raw_readl(div_addr) & field_mask; |
| field_val >>= __ffs(field_mask); |
| |
| return omap2_clksel_to_divisor(clk, field_val); |
| } |
| |
| int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) |
| { |
| u32 field_mask, field_val, reg_val, validrate, new_div = 0; |
| void __iomem *div_addr; |
| |
| validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); |
| if (validrate != rate) |
| return -EINVAL; |
| |
| div_addr = omap2_get_clksel(clk, &field_mask); |
| if (div_addr == 0) |
| return -EINVAL; |
| |
| field_val = omap2_divisor_to_clksel(clk, new_div); |
| if (field_val == ~0) |
| return -EINVAL; |
| |
| reg_val = __raw_readl(div_addr); |
| reg_val &= ~field_mask; |
| reg_val |= (field_val << __ffs(field_mask)); |
| __raw_writel(reg_val, div_addr); |
| wmb(); |
| |
| clk->rate = clk->parent->rate / new_div; |
| |
| if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { |
| __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL); |
| wmb(); |
| } |
| |
| return 0; |
| } |
| |
| |
| /* Set the clock rate for a clock source */ |
| int omap2_clk_set_rate(struct clk *clk, unsigned long rate) |
| { |
| int ret = -EINVAL; |
| |
| pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate); |
| |
| /* CONFIG_PARTICIPANT clocks are changed only in sets via the |
| rate table mechanism, driven by mpu_speed */ |
| if (clk->flags & CONFIG_PARTICIPANT) |
| return -EINVAL; |
| |
| /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */ |
| if (clk->set_rate != 0) |
| ret = clk->set_rate(clk, rate); |
| |
| if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) |
| propagate_rate(clk); |
| |
| return ret; |
| } |
| |
| /* |
| * Converts encoded control register address into a full address |
| * On error, *src_addr will be returned as 0. |
| */ |
| static u32 omap2_clksel_get_src_field(void __iomem **src_addr, |
| struct clk *src_clk, u32 *field_mask, |
| struct clk *clk, u32 *parent_div) |
| { |
| const struct clksel *clks; |
| const struct clksel_rate *clkr; |
| |
| *parent_div = 0; |
| *src_addr = 0; |
| |
| clks = omap2_get_clksel_by_parent(clk, src_clk); |
| if (clks == NULL) |
| return 0; |
| |
| for (clkr = clks->rates; clkr->div; clkr++) { |
| if (clkr->flags & (cpu_mask | DEFAULT_RATE)) |
| break; /* Found the default rate for this platform */ |
| } |
| |
| if (!clkr->div) { |
| printk(KERN_ERR "clock: Could not find default rate for " |
| "clock %s parent %s\n", clk->name, |
| src_clk->parent->name); |
| return 0; |
| } |
| |
| /* Should never happen. Add a clksel mask to the struct clk. */ |
| WARN_ON(clk->clksel_mask == 0); |
| |
| *field_mask = clk->clksel_mask; |
| *src_addr = clk->clksel_reg; |
| *parent_div = clkr->div; |
| |
| return clkr->val; |
| } |
| |
| int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) |
| { |
| void __iomem *src_addr; |
| u32 field_val, field_mask, reg_val, parent_div; |
| |
| if (unlikely(clk->flags & CONFIG_PARTICIPANT)) |
| return -EINVAL; |
| |
| if (!clk->clksel) |
| return -EINVAL; |
| |
| field_val = omap2_clksel_get_src_field(&src_addr, new_parent, |
| &field_mask, clk, &parent_div); |
| if (src_addr == 0) |
| return -EINVAL; |
| |
| if (clk->usecount > 0) |
| _omap2_clk_disable(clk); |
| |
| /* Set new source value (previous dividers if any in effect) */ |
| reg_val = __raw_readl(src_addr) & ~field_mask; |
| reg_val |= (field_val << __ffs(field_mask)); |
| __raw_writel(reg_val, src_addr); |
| wmb(); |
| |
| if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { |
| __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL); |
| wmb(); |
| } |
| |
| if (clk->usecount > 0) |
| _omap2_clk_enable(clk); |
| |
| clk->parent = new_parent; |
| |
| /* CLKSEL clocks follow their parents' rates, divided by a divisor */ |
| clk->rate = new_parent->rate; |
| |
| if (parent_div > 0) |
| clk->rate /= parent_div; |
| |
| pr_debug("clock: set parent of %s to %s (new rate %ld)\n", |
| clk->name, clk->parent->name, clk->rate); |
| |
| if (unlikely(clk->flags & RATE_PROPAGATES)) |
| propagate_rate(clk); |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------------- |
| * Omap2 clock reset and init functions |
| *-------------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_OMAP_RESET_CLOCKS |
| void omap2_clk_disable_unused(struct clk *clk) |
| { |
| u32 regval32, v; |
| |
| v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0; |
| |
| regval32 = __raw_readl(clk->enable_reg); |
| if ((regval32 & (1 << clk->enable_bit)) == v) |
| return; |
| |
| printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); |
| _omap2_clk_disable(clk); |
| } |
| #endif |