| /* |
| * edac_mc kernel module |
| * (C) 2005, 2006 Linux Networx (http://lnxi.com) |
| * This file may be distributed under the terms of the |
| * GNU General Public License. |
| * |
| * Written by Thayne Harbaugh |
| * Based on work by Dan Hollis <goemon at anime dot net> and others. |
| * http://www.anime.net/~goemon/linux-ecc/ |
| * |
| * Modified by Dave Peterson and Doug Thompson |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/proc_fs.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/smp.h> |
| #include <linux/init.h> |
| #include <linux/sysctl.h> |
| #include <linux/highmem.h> |
| #include <linux/timer.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/spinlock.h> |
| #include <linux/list.h> |
| #include <linux/sysdev.h> |
| #include <linux/ctype.h> |
| #include <linux/kthread.h> |
| #include <linux/freezer.h> |
| #include <asm/uaccess.h> |
| #include <asm/page.h> |
| #include <asm/edac.h> |
| #include "edac_mc.h" |
| |
| #define EDAC_MC_VERSION "Ver: 2.0.1 " __DATE__ |
| |
| |
| #ifdef CONFIG_EDAC_DEBUG |
| /* Values of 0 to 4 will generate output */ |
| int edac_debug_level = 1; |
| EXPORT_SYMBOL_GPL(edac_debug_level); |
| #endif |
| |
| /* EDAC Controls, setable by module parameter, and sysfs */ |
| static int log_ue = 1; |
| static int log_ce = 1; |
| static int panic_on_ue; |
| static int poll_msec = 1000; |
| |
| /* lock to memory controller's control array */ |
| static DECLARE_MUTEX(mem_ctls_mutex); |
| static struct list_head mc_devices = LIST_HEAD_INIT(mc_devices); |
| |
| static struct task_struct *edac_thread; |
| |
| #ifdef CONFIG_PCI |
| static int check_pci_parity = 0; /* default YES check PCI parity */ |
| static int panic_on_pci_parity; /* default no panic on PCI Parity */ |
| static atomic_t pci_parity_count = ATOMIC_INIT(0); |
| |
| static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */ |
| static struct completion edac_pci_kobj_complete; |
| #endif /* CONFIG_PCI */ |
| |
| /* START sysfs data and methods */ |
| |
| |
| static const char *mem_types[] = { |
| [MEM_EMPTY] = "Empty", |
| [MEM_RESERVED] = "Reserved", |
| [MEM_UNKNOWN] = "Unknown", |
| [MEM_FPM] = "FPM", |
| [MEM_EDO] = "EDO", |
| [MEM_BEDO] = "BEDO", |
| [MEM_SDR] = "Unbuffered-SDR", |
| [MEM_RDR] = "Registered-SDR", |
| [MEM_DDR] = "Unbuffered-DDR", |
| [MEM_RDDR] = "Registered-DDR", |
| [MEM_RMBS] = "RMBS" |
| }; |
| |
| static const char *dev_types[] = { |
| [DEV_UNKNOWN] = "Unknown", |
| [DEV_X1] = "x1", |
| [DEV_X2] = "x2", |
| [DEV_X4] = "x4", |
| [DEV_X8] = "x8", |
| [DEV_X16] = "x16", |
| [DEV_X32] = "x32", |
| [DEV_X64] = "x64" |
| }; |
| |
| static const char *edac_caps[] = { |
| [EDAC_UNKNOWN] = "Unknown", |
| [EDAC_NONE] = "None", |
| [EDAC_RESERVED] = "Reserved", |
| [EDAC_PARITY] = "PARITY", |
| [EDAC_EC] = "EC", |
| [EDAC_SECDED] = "SECDED", |
| [EDAC_S2ECD2ED] = "S2ECD2ED", |
| [EDAC_S4ECD4ED] = "S4ECD4ED", |
| [EDAC_S8ECD8ED] = "S8ECD8ED", |
| [EDAC_S16ECD16ED] = "S16ECD16ED" |
| }; |
| |
| /* sysfs object: /sys/devices/system/edac */ |
| static struct sysdev_class edac_class = { |
| set_kset_name("edac"), |
| }; |
| |
| /* sysfs object: |
| * /sys/devices/system/edac/mc |
| */ |
| static struct kobject edac_memctrl_kobj; |
| |
| /* We use these to wait for the reference counts on edac_memctrl_kobj and |
| * edac_pci_kobj to reach 0. |
| */ |
| static struct completion edac_memctrl_kobj_complete; |
| |
| /* |
| * /sys/devices/system/edac/mc; |
| * data structures and methods |
| */ |
| static ssize_t memctrl_int_show(void *ptr, char *buffer) |
| { |
| int *value = (int*) ptr; |
| return sprintf(buffer, "%u\n", *value); |
| } |
| |
| static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count) |
| { |
| int *value = (int*) ptr; |
| |
| if (isdigit(*buffer)) |
| *value = simple_strtoul(buffer, NULL, 0); |
| |
| return count; |
| } |
| |
| struct memctrl_dev_attribute { |
| struct attribute attr; |
| void *value; |
| ssize_t (*show)(void *,char *); |
| ssize_t (*store)(void *, const char *, size_t); |
| }; |
| |
| /* Set of show/store abstract level functions for memory control object */ |
| static ssize_t memctrl_dev_show(struct kobject *kobj, |
| struct attribute *attr, char *buffer) |
| { |
| struct memctrl_dev_attribute *memctrl_dev; |
| memctrl_dev = (struct memctrl_dev_attribute*)attr; |
| |
| if (memctrl_dev->show) |
| return memctrl_dev->show(memctrl_dev->value, buffer); |
| |
| return -EIO; |
| } |
| |
| static ssize_t memctrl_dev_store(struct kobject *kobj, struct attribute *attr, |
| const char *buffer, size_t count) |
| { |
| struct memctrl_dev_attribute *memctrl_dev; |
| memctrl_dev = (struct memctrl_dev_attribute*)attr; |
| |
| if (memctrl_dev->store) |
| return memctrl_dev->store(memctrl_dev->value, buffer, count); |
| |
| return -EIO; |
| } |
| |
| static struct sysfs_ops memctrlfs_ops = { |
| .show = memctrl_dev_show, |
| .store = memctrl_dev_store |
| }; |
| |
| #define MEMCTRL_ATTR(_name,_mode,_show,_store) \ |
| struct memctrl_dev_attribute attr_##_name = { \ |
| .attr = {.name = __stringify(_name), .mode = _mode }, \ |
| .value = &_name, \ |
| .show = _show, \ |
| .store = _store, \ |
| }; |
| |
| #define MEMCTRL_STRING_ATTR(_name,_data,_mode,_show,_store) \ |
| struct memctrl_dev_attribute attr_##_name = { \ |
| .attr = {.name = __stringify(_name), .mode = _mode }, \ |
| .value = _data, \ |
| .show = _show, \ |
| .store = _store, \ |
| }; |
| |
| /* csrow<id> control files */ |
| MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store); |
| MEMCTRL_ATTR(log_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store); |
| MEMCTRL_ATTR(log_ce,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store); |
| MEMCTRL_ATTR(poll_msec,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store); |
| |
| /* Base Attributes of the memory ECC object */ |
| static struct memctrl_dev_attribute *memctrl_attr[] = { |
| &attr_panic_on_ue, |
| &attr_log_ue, |
| &attr_log_ce, |
| &attr_poll_msec, |
| NULL, |
| }; |
| |
| /* Main MC kobject release() function */ |
| static void edac_memctrl_master_release(struct kobject *kobj) |
| { |
| debugf1("%s()\n", __func__); |
| complete(&edac_memctrl_kobj_complete); |
| } |
| |
| static struct kobj_type ktype_memctrl = { |
| .release = edac_memctrl_master_release, |
| .sysfs_ops = &memctrlfs_ops, |
| .default_attrs = (struct attribute **) memctrl_attr, |
| }; |
| |
| /* Initialize the main sysfs entries for edac: |
| * /sys/devices/system/edac |
| * |
| * and children |
| * |
| * Return: 0 SUCCESS |
| * !0 FAILURE |
| */ |
| static int edac_sysfs_memctrl_setup(void) |
| { |
| int err = 0; |
| |
| debugf1("%s()\n", __func__); |
| |
| /* create the /sys/devices/system/edac directory */ |
| err = sysdev_class_register(&edac_class); |
| |
| if (err) { |
| debugf1("%s() error=%d\n", __func__, err); |
| return err; |
| } |
| |
| /* Init the MC's kobject */ |
| memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj)); |
| edac_memctrl_kobj.parent = &edac_class.kset.kobj; |
| edac_memctrl_kobj.ktype = &ktype_memctrl; |
| |
| /* generate sysfs "..../edac/mc" */ |
| err = kobject_set_name(&edac_memctrl_kobj,"mc"); |
| |
| if (err) |
| goto fail; |
| |
| /* FIXME: maybe new sysdev_create_subdir() */ |
| err = kobject_register(&edac_memctrl_kobj); |
| |
| if (err) { |
| debugf1("Failed to register '.../edac/mc'\n"); |
| goto fail; |
| } |
| |
| debugf1("Registered '.../edac/mc' kobject\n"); |
| |
| return 0; |
| |
| fail: |
| sysdev_class_unregister(&edac_class); |
| return err; |
| } |
| |
| /* |
| * MC teardown: |
| * the '..../edac/mc' kobject followed by '..../edac' itself |
| */ |
| static void edac_sysfs_memctrl_teardown(void) |
| { |
| debugf0("MC: " __FILE__ ": %s()\n", __func__); |
| |
| /* Unregister the MC's kobject and wait for reference count to reach |
| * 0. |
| */ |
| init_completion(&edac_memctrl_kobj_complete); |
| kobject_unregister(&edac_memctrl_kobj); |
| wait_for_completion(&edac_memctrl_kobj_complete); |
| |
| /* Unregister the 'edac' object */ |
| sysdev_class_unregister(&edac_class); |
| } |
| |
| #ifdef CONFIG_PCI |
| static ssize_t edac_pci_int_show(void *ptr, char *buffer) |
| { |
| int *value = ptr; |
| return sprintf(buffer,"%d\n",*value); |
| } |
| |
| static ssize_t edac_pci_int_store(void *ptr, const char *buffer, size_t count) |
| { |
| int *value = ptr; |
| |
| if (isdigit(*buffer)) |
| *value = simple_strtoul(buffer,NULL,0); |
| |
| return count; |
| } |
| |
| struct edac_pci_dev_attribute { |
| struct attribute attr; |
| void *value; |
| ssize_t (*show)(void *,char *); |
| ssize_t (*store)(void *, const char *,size_t); |
| }; |
| |
| /* Set of show/store abstract level functions for PCI Parity object */ |
| static ssize_t edac_pci_dev_show(struct kobject *kobj, struct attribute *attr, |
| char *buffer) |
| { |
| struct edac_pci_dev_attribute *edac_pci_dev; |
| edac_pci_dev= (struct edac_pci_dev_attribute*)attr; |
| |
| if (edac_pci_dev->show) |
| return edac_pci_dev->show(edac_pci_dev->value, buffer); |
| return -EIO; |
| } |
| |
| static ssize_t edac_pci_dev_store(struct kobject *kobj, |
| struct attribute *attr, const char *buffer, size_t count) |
| { |
| struct edac_pci_dev_attribute *edac_pci_dev; |
| edac_pci_dev= (struct edac_pci_dev_attribute*)attr; |
| |
| if (edac_pci_dev->show) |
| return edac_pci_dev->store(edac_pci_dev->value, buffer, count); |
| return -EIO; |
| } |
| |
| static struct sysfs_ops edac_pci_sysfs_ops = { |
| .show = edac_pci_dev_show, |
| .store = edac_pci_dev_store |
| }; |
| |
| #define EDAC_PCI_ATTR(_name,_mode,_show,_store) \ |
| struct edac_pci_dev_attribute edac_pci_attr_##_name = { \ |
| .attr = {.name = __stringify(_name), .mode = _mode }, \ |
| .value = &_name, \ |
| .show = _show, \ |
| .store = _store, \ |
| }; |
| |
| #define EDAC_PCI_STRING_ATTR(_name,_data,_mode,_show,_store) \ |
| struct edac_pci_dev_attribute edac_pci_attr_##_name = { \ |
| .attr = {.name = __stringify(_name), .mode = _mode }, \ |
| .value = _data, \ |
| .show = _show, \ |
| .store = _store, \ |
| }; |
| |
| /* PCI Parity control files */ |
| EDAC_PCI_ATTR(check_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show, |
| edac_pci_int_store); |
| EDAC_PCI_ATTR(panic_on_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show, |
| edac_pci_int_store); |
| EDAC_PCI_ATTR(pci_parity_count, S_IRUGO, edac_pci_int_show, NULL); |
| |
| /* Base Attributes of the memory ECC object */ |
| static struct edac_pci_dev_attribute *edac_pci_attr[] = { |
| &edac_pci_attr_check_pci_parity, |
| &edac_pci_attr_panic_on_pci_parity, |
| &edac_pci_attr_pci_parity_count, |
| NULL, |
| }; |
| |
| /* No memory to release */ |
| static void edac_pci_release(struct kobject *kobj) |
| { |
| debugf1("%s()\n", __func__); |
| complete(&edac_pci_kobj_complete); |
| } |
| |
| static struct kobj_type ktype_edac_pci = { |
| .release = edac_pci_release, |
| .sysfs_ops = &edac_pci_sysfs_ops, |
| .default_attrs = (struct attribute **) edac_pci_attr, |
| }; |
| |
| /** |
| * edac_sysfs_pci_setup() |
| * |
| */ |
| static int edac_sysfs_pci_setup(void) |
| { |
| int err; |
| |
| debugf1("%s()\n", __func__); |
| |
| memset(&edac_pci_kobj, 0, sizeof(edac_pci_kobj)); |
| edac_pci_kobj.parent = &edac_class.kset.kobj; |
| edac_pci_kobj.ktype = &ktype_edac_pci; |
| err = kobject_set_name(&edac_pci_kobj, "pci"); |
| |
| if (!err) { |
| /* Instanstiate the csrow object */ |
| /* FIXME: maybe new sysdev_create_subdir() */ |
| err = kobject_register(&edac_pci_kobj); |
| |
| if (err) |
| debugf1("Failed to register '.../edac/pci'\n"); |
| else |
| debugf1("Registered '.../edac/pci' kobject\n"); |
| } |
| |
| return err; |
| } |
| |
| static void edac_sysfs_pci_teardown(void) |
| { |
| debugf0("%s()\n", __func__); |
| init_completion(&edac_pci_kobj_complete); |
| kobject_unregister(&edac_pci_kobj); |
| wait_for_completion(&edac_pci_kobj_complete); |
| } |
| |
| |
| static u16 get_pci_parity_status(struct pci_dev *dev, int secondary) |
| { |
| int where; |
| u16 status; |
| |
| where = secondary ? PCI_SEC_STATUS : PCI_STATUS; |
| pci_read_config_word(dev, where, &status); |
| |
| /* If we get back 0xFFFF then we must suspect that the card has been |
| * pulled but the Linux PCI layer has not yet finished cleaning up. |
| * We don't want to report on such devices |
| */ |
| |
| if (status == 0xFFFF) { |
| u32 sanity; |
| |
| pci_read_config_dword(dev, 0, &sanity); |
| |
| if (sanity == 0xFFFFFFFF) |
| return 0; |
| } |
| |
| status &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | |
| PCI_STATUS_PARITY; |
| |
| if (status) |
| /* reset only the bits we are interested in */ |
| pci_write_config_word(dev, where, status); |
| |
| return status; |
| } |
| |
| typedef void (*pci_parity_check_fn_t) (struct pci_dev *dev); |
| |
| /* Clear any PCI parity errors logged by this device. */ |
| static void edac_pci_dev_parity_clear(struct pci_dev *dev) |
| { |
| u8 header_type; |
| |
| get_pci_parity_status(dev, 0); |
| |
| /* read the device TYPE, looking for bridges */ |
| pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); |
| |
| if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) |
| get_pci_parity_status(dev, 1); |
| } |
| |
| /* |
| * PCI Parity polling |
| * |
| */ |
| static void edac_pci_dev_parity_test(struct pci_dev *dev) |
| { |
| u16 status; |
| u8 header_type; |
| |
| /* read the STATUS register on this device |
| */ |
| status = get_pci_parity_status(dev, 0); |
| |
| debugf2("PCI STATUS= 0x%04x %s\n", status, dev->dev.bus_id ); |
| |
| /* check the status reg for errors */ |
| if (status) { |
| if (status & (PCI_STATUS_SIG_SYSTEM_ERROR)) |
| edac_printk(KERN_CRIT, EDAC_PCI, |
| "Signaled System Error on %s\n", |
| pci_name(dev)); |
| |
| if (status & (PCI_STATUS_PARITY)) { |
| edac_printk(KERN_CRIT, EDAC_PCI, |
| "Master Data Parity Error on %s\n", |
| pci_name(dev)); |
| |
| atomic_inc(&pci_parity_count); |
| } |
| |
| if (status & (PCI_STATUS_DETECTED_PARITY)) { |
| edac_printk(KERN_CRIT, EDAC_PCI, |
| "Detected Parity Error on %s\n", |
| pci_name(dev)); |
| |
| atomic_inc(&pci_parity_count); |
| } |
| } |
| |
| /* read the device TYPE, looking for bridges */ |
| pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); |
| |
| debugf2("PCI HEADER TYPE= 0x%02x %s\n", header_type, dev->dev.bus_id ); |
| |
| if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { |
| /* On bridges, need to examine secondary status register */ |
| status = get_pci_parity_status(dev, 1); |
| |
| debugf2("PCI SEC_STATUS= 0x%04x %s\n", |
| status, dev->dev.bus_id ); |
| |
| /* check the secondary status reg for errors */ |
| if (status) { |
| if (status & (PCI_STATUS_SIG_SYSTEM_ERROR)) |
| edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " |
| "Signaled System Error on %s\n", |
| pci_name(dev)); |
| |
| if (status & (PCI_STATUS_PARITY)) { |
| edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " |
| "Master Data Parity Error on " |
| "%s\n", pci_name(dev)); |
| |
| atomic_inc(&pci_parity_count); |
| } |
| |
| if (status & (PCI_STATUS_DETECTED_PARITY)) { |
| edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " |
| "Detected Parity Error on %s\n", |
| pci_name(dev)); |
| |
| atomic_inc(&pci_parity_count); |
| } |
| } |
| } |
| } |
| |
| /* |
| * pci_dev parity list iterator |
| * Scan the PCI device list for one iteration, looking for SERRORs |
| * Master Parity ERRORS or Parity ERRORs on primary or secondary devices |
| */ |
| static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn) |
| { |
| struct pci_dev *dev = NULL; |
| |
| /* request for kernel access to the next PCI device, if any, |
| * and while we are looking at it have its reference count |
| * bumped until we are done with it |
| */ |
| while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { |
| fn(dev); |
| } |
| } |
| |
| static void do_pci_parity_check(void) |
| { |
| unsigned long flags; |
| int before_count; |
| |
| debugf3("%s()\n", __func__); |
| |
| if (!check_pci_parity) |
| return; |
| |
| before_count = atomic_read(&pci_parity_count); |
| |
| /* scan all PCI devices looking for a Parity Error on devices and |
| * bridges |
| */ |
| local_irq_save(flags); |
| edac_pci_dev_parity_iterator(edac_pci_dev_parity_test); |
| local_irq_restore(flags); |
| |
| /* Only if operator has selected panic on PCI Error */ |
| if (panic_on_pci_parity) { |
| /* If the count is different 'after' from 'before' */ |
| if (before_count != atomic_read(&pci_parity_count)) |
| panic("EDAC: PCI Parity Error"); |
| } |
| } |
| |
| static inline void clear_pci_parity_errors(void) |
| { |
| /* Clear any PCI bus parity errors that devices initially have logged |
| * in their registers. |
| */ |
| edac_pci_dev_parity_iterator(edac_pci_dev_parity_clear); |
| } |
| |
| #else /* CONFIG_PCI */ |
| |
| /* pre-process these away */ |
| #define do_pci_parity_check() |
| #define clear_pci_parity_errors() |
| #define edac_sysfs_pci_teardown() |
| #define edac_sysfs_pci_setup() (0) |
| |
| #endif /* CONFIG_PCI */ |
| |
| /* EDAC sysfs CSROW data structures and methods |
| */ |
| |
| /* Set of more default csrow<id> attribute show/store functions */ |
| static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data, int private) |
| { |
| return sprintf(data,"%u\n", csrow->ue_count); |
| } |
| |
| static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data, int private) |
| { |
| return sprintf(data,"%u\n", csrow->ce_count); |
| } |
| |
| static ssize_t csrow_size_show(struct csrow_info *csrow, char *data, int private) |
| { |
| return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages)); |
| } |
| |
| static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data, int private) |
| { |
| return sprintf(data,"%s\n", mem_types[csrow->mtype]); |
| } |
| |
| static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data, int private) |
| { |
| return sprintf(data,"%s\n", dev_types[csrow->dtype]); |
| } |
| |
| static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data, int private) |
| { |
| return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]); |
| } |
| |
| /* show/store functions for DIMM Label attributes */ |
| static ssize_t channel_dimm_label_show(struct csrow_info *csrow, |
| char *data, int channel) |
| { |
| return snprintf(data, EDAC_MC_LABEL_LEN,"%s", |
| csrow->channels[channel].label); |
| } |
| |
| static ssize_t channel_dimm_label_store(struct csrow_info *csrow, |
| const char *data, |
| size_t count, |
| int channel) |
| { |
| ssize_t max_size = 0; |
| |
| max_size = min((ssize_t)count,(ssize_t)EDAC_MC_LABEL_LEN-1); |
| strncpy(csrow->channels[channel].label, data, max_size); |
| csrow->channels[channel].label[max_size] = '\0'; |
| |
| return max_size; |
| } |
| |
| /* show function for dynamic chX_ce_count attribute */ |
| static ssize_t channel_ce_count_show(struct csrow_info *csrow, |
| char *data, |
| int channel) |
| { |
| return sprintf(data, "%u\n", csrow->channels[channel].ce_count); |
| } |
| |
| /* csrow specific attribute structure */ |
| struct csrowdev_attribute { |
| struct attribute attr; |
| ssize_t (*show)(struct csrow_info *,char *,int); |
| ssize_t (*store)(struct csrow_info *, const char *,size_t,int); |
| int private; |
| }; |
| |
| #define to_csrow(k) container_of(k, struct csrow_info, kobj) |
| #define to_csrowdev_attr(a) container_of(a, struct csrowdev_attribute, attr) |
| |
| /* Set of show/store higher level functions for default csrow attributes */ |
| static ssize_t csrowdev_show(struct kobject *kobj, |
| struct attribute *attr, |
| char *buffer) |
| { |
| struct csrow_info *csrow = to_csrow(kobj); |
| struct csrowdev_attribute *csrowdev_attr = to_csrowdev_attr(attr); |
| |
| if (csrowdev_attr->show) |
| return csrowdev_attr->show(csrow, |
| buffer, |
| csrowdev_attr->private); |
| return -EIO; |
| } |
| |
| static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr, |
| const char *buffer, size_t count) |
| { |
| struct csrow_info *csrow = to_csrow(kobj); |
| struct csrowdev_attribute * csrowdev_attr = to_csrowdev_attr(attr); |
| |
| if (csrowdev_attr->store) |
| return csrowdev_attr->store(csrow, |
| buffer, |
| count, |
| csrowdev_attr->private); |
| return -EIO; |
| } |
| |
| static struct sysfs_ops csrowfs_ops = { |
| .show = csrowdev_show, |
| .store = csrowdev_store |
| }; |
| |
| #define CSROWDEV_ATTR(_name,_mode,_show,_store,_private) \ |
| struct csrowdev_attribute attr_##_name = { \ |
| .attr = {.name = __stringify(_name), .mode = _mode }, \ |
| .show = _show, \ |
| .store = _store, \ |
| .private = _private, \ |
| }; |
| |
| /* default cwrow<id>/attribute files */ |
| CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL,0); |
| CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL,0); |
| CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL,0); |
| CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL,0); |
| CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL,0); |
| CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL,0); |
| |
| /* default attributes of the CSROW<id> object */ |
| static struct csrowdev_attribute *default_csrow_attr[] = { |
| &attr_dev_type, |
| &attr_mem_type, |
| &attr_edac_mode, |
| &attr_size_mb, |
| &attr_ue_count, |
| &attr_ce_count, |
| NULL, |
| }; |
| |
| |
| /* possible dynamic channel DIMM Label attribute files */ |
| CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR, |
| channel_dimm_label_show, |
| channel_dimm_label_store, |
| 0 ); |
| CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR, |
| channel_dimm_label_show, |
| channel_dimm_label_store, |
| 1 ); |
| CSROWDEV_ATTR(ch2_dimm_label,S_IRUGO|S_IWUSR, |
| channel_dimm_label_show, |
| channel_dimm_label_store, |
| 2 ); |
| CSROWDEV_ATTR(ch3_dimm_label,S_IRUGO|S_IWUSR, |
| channel_dimm_label_show, |
| channel_dimm_label_store, |
| 3 ); |
| CSROWDEV_ATTR(ch4_dimm_label,S_IRUGO|S_IWUSR, |
| channel_dimm_label_show, |
| channel_dimm_label_store, |
| 4 ); |
| CSROWDEV_ATTR(ch5_dimm_label,S_IRUGO|S_IWUSR, |
| channel_dimm_label_show, |
| channel_dimm_label_store, |
| 5 ); |
| |
| /* Total possible dynamic DIMM Label attribute file table */ |
| static struct csrowdev_attribute *dynamic_csrow_dimm_attr[] = { |
| &attr_ch0_dimm_label, |
| &attr_ch1_dimm_label, |
| &attr_ch2_dimm_label, |
| &attr_ch3_dimm_label, |
| &attr_ch4_dimm_label, |
| &attr_ch5_dimm_label |
| }; |
| |
| /* possible dynamic channel ce_count attribute files */ |
| CSROWDEV_ATTR(ch0_ce_count,S_IRUGO|S_IWUSR, |
| channel_ce_count_show, |
| NULL, |
| 0 ); |
| CSROWDEV_ATTR(ch1_ce_count,S_IRUGO|S_IWUSR, |
| channel_ce_count_show, |
| NULL, |
| 1 ); |
| CSROWDEV_ATTR(ch2_ce_count,S_IRUGO|S_IWUSR, |
| channel_ce_count_show, |
| NULL, |
| 2 ); |
| CSROWDEV_ATTR(ch3_ce_count,S_IRUGO|S_IWUSR, |
| channel_ce_count_show, |
| NULL, |
| 3 ); |
| CSROWDEV_ATTR(ch4_ce_count,S_IRUGO|S_IWUSR, |
| channel_ce_count_show, |
| NULL, |
| 4 ); |
| CSROWDEV_ATTR(ch5_ce_count,S_IRUGO|S_IWUSR, |
| channel_ce_count_show, |
| NULL, |
| 5 ); |
| |
| /* Total possible dynamic ce_count attribute file table */ |
| static struct csrowdev_attribute *dynamic_csrow_ce_count_attr[] = { |
| &attr_ch0_ce_count, |
| &attr_ch1_ce_count, |
| &attr_ch2_ce_count, |
| &attr_ch3_ce_count, |
| &attr_ch4_ce_count, |
| &attr_ch5_ce_count |
| }; |
| |
| |
| #define EDAC_NR_CHANNELS 6 |
| |
| /* Create dynamic CHANNEL files, indexed by 'chan', under specifed CSROW */ |
| static int edac_create_channel_files(struct kobject *kobj, int chan) |
| { |
| int err=-ENODEV; |
| |
| if (chan >= EDAC_NR_CHANNELS) |
| return err; |
| |
| /* create the DIMM label attribute file */ |
| err = sysfs_create_file(kobj, |
| (struct attribute *) dynamic_csrow_dimm_attr[chan]); |
| |
| if (!err) { |
| /* create the CE Count attribute file */ |
| err = sysfs_create_file(kobj, |
| (struct attribute *) dynamic_csrow_ce_count_attr[chan]); |
| } else { |
| debugf1("%s() dimm labels and ce_count files created", __func__); |
| } |
| |
| return err; |
| } |
| |
| /* No memory to release for this kobj */ |
| static void edac_csrow_instance_release(struct kobject *kobj) |
| { |
| struct csrow_info *cs; |
| |
| cs = container_of(kobj, struct csrow_info, kobj); |
| complete(&cs->kobj_complete); |
| } |
| |
| /* the kobj_type instance for a CSROW */ |
| static struct kobj_type ktype_csrow = { |
| .release = edac_csrow_instance_release, |
| .sysfs_ops = &csrowfs_ops, |
| .default_attrs = (struct attribute **) default_csrow_attr, |
| }; |
| |
| /* Create a CSROW object under specifed edac_mc_device */ |
| static int edac_create_csrow_object( |
| struct kobject *edac_mci_kobj, |
| struct csrow_info *csrow, |
| int index) |
| { |
| int err = 0; |
| int chan; |
| |
| memset(&csrow->kobj, 0, sizeof(csrow->kobj)); |
| |
| /* generate ..../edac/mc/mc<id>/csrow<index> */ |
| |
| csrow->kobj.parent = edac_mci_kobj; |
| csrow->kobj.ktype = &ktype_csrow; |
| |
| /* name this instance of csrow<id> */ |
| err = kobject_set_name(&csrow->kobj,"csrow%d",index); |
| if (err) |
| goto error_exit; |
| |
| /* Instanstiate the csrow object */ |
| err = kobject_register(&csrow->kobj); |
| if (!err) { |
| /* Create the dyanmic attribute files on this csrow, |
| * namely, the DIMM labels and the channel ce_count |
| */ |
| for (chan = 0; chan < csrow->nr_channels; chan++) { |
| err = edac_create_channel_files(&csrow->kobj,chan); |
| if (err) |
| break; |
| } |
| } |
| |
| error_exit: |
| return err; |
| } |
| |
| /* default sysfs methods and data structures for the main MCI kobject */ |
| |
| static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci, |
| const char *data, size_t count) |
| { |
| int row, chan; |
| |
| mci->ue_noinfo_count = 0; |
| mci->ce_noinfo_count = 0; |
| mci->ue_count = 0; |
| mci->ce_count = 0; |
| |
| for (row = 0; row < mci->nr_csrows; row++) { |
| struct csrow_info *ri = &mci->csrows[row]; |
| |
| ri->ue_count = 0; |
| ri->ce_count = 0; |
| |
| for (chan = 0; chan < ri->nr_channels; chan++) |
| ri->channels[chan].ce_count = 0; |
| } |
| |
| mci->start_time = jiffies; |
| return count; |
| } |
| |
| /* default attribute files for the MCI object */ |
| static ssize_t mci_ue_count_show(struct mem_ctl_info *mci, char *data) |
| { |
| return sprintf(data,"%d\n", mci->ue_count); |
| } |
| |
| static ssize_t mci_ce_count_show(struct mem_ctl_info *mci, char *data) |
| { |
| return sprintf(data,"%d\n", mci->ce_count); |
| } |
| |
| static ssize_t mci_ce_noinfo_show(struct mem_ctl_info *mci, char *data) |
| { |
| return sprintf(data,"%d\n", mci->ce_noinfo_count); |
| } |
| |
| static ssize_t mci_ue_noinfo_show(struct mem_ctl_info *mci, char *data) |
| { |
| return sprintf(data,"%d\n", mci->ue_noinfo_count); |
| } |
| |
| static ssize_t mci_seconds_show(struct mem_ctl_info *mci, char *data) |
| { |
| return sprintf(data,"%ld\n", (jiffies - mci->start_time) / HZ); |
| } |
| |
| static ssize_t mci_ctl_name_show(struct mem_ctl_info *mci, char *data) |
| { |
| return sprintf(data,"%s\n", mci->ctl_name); |
| } |
| |
| static ssize_t mci_size_mb_show(struct mem_ctl_info *mci, char *data) |
| { |
| int total_pages, csrow_idx; |
| |
| for (total_pages = csrow_idx = 0; csrow_idx < mci->nr_csrows; |
| csrow_idx++) { |
| struct csrow_info *csrow = &mci->csrows[csrow_idx]; |
| |
| if (!csrow->nr_pages) |
| continue; |
| |
| total_pages += csrow->nr_pages; |
| } |
| |
| return sprintf(data,"%u\n", PAGES_TO_MiB(total_pages)); |
| } |
| |
| struct mcidev_attribute { |
| struct attribute attr; |
| ssize_t (*show)(struct mem_ctl_info *,char *); |
| ssize_t (*store)(struct mem_ctl_info *, const char *,size_t); |
| }; |
| |
| #define to_mci(k) container_of(k, struct mem_ctl_info, edac_mci_kobj) |
| #define to_mcidev_attr(a) container_of(a, struct mcidev_attribute, attr) |
| |
| /* MCI show/store functions for top most object */ |
| static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr, |
| char *buffer) |
| { |
| struct mem_ctl_info *mem_ctl_info = to_mci(kobj); |
| struct mcidev_attribute * mcidev_attr = to_mcidev_attr(attr); |
| |
| if (mcidev_attr->show) |
| return mcidev_attr->show(mem_ctl_info, buffer); |
| |
| return -EIO; |
| } |
| |
| static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr, |
| const char *buffer, size_t count) |
| { |
| struct mem_ctl_info *mem_ctl_info = to_mci(kobj); |
| struct mcidev_attribute * mcidev_attr = to_mcidev_attr(attr); |
| |
| if (mcidev_attr->store) |
| return mcidev_attr->store(mem_ctl_info, buffer, count); |
| |
| return -EIO; |
| } |
| |
| static struct sysfs_ops mci_ops = { |
| .show = mcidev_show, |
| .store = mcidev_store |
| }; |
| |
| #define MCIDEV_ATTR(_name,_mode,_show,_store) \ |
| struct mcidev_attribute mci_attr_##_name = { \ |
| .attr = {.name = __stringify(_name), .mode = _mode }, \ |
| .show = _show, \ |
| .store = _store, \ |
| }; |
| |
| /* default Control file */ |
| MCIDEV_ATTR(reset_counters,S_IWUSR,NULL,mci_reset_counters_store); |
| |
| /* default Attribute files */ |
| MCIDEV_ATTR(mc_name,S_IRUGO,mci_ctl_name_show,NULL); |
| MCIDEV_ATTR(size_mb,S_IRUGO,mci_size_mb_show,NULL); |
| MCIDEV_ATTR(seconds_since_reset,S_IRUGO,mci_seconds_show,NULL); |
| MCIDEV_ATTR(ue_noinfo_count,S_IRUGO,mci_ue_noinfo_show,NULL); |
| MCIDEV_ATTR(ce_noinfo_count,S_IRUGO,mci_ce_noinfo_show,NULL); |
| MCIDEV_ATTR(ue_count,S_IRUGO,mci_ue_count_show,NULL); |
| MCIDEV_ATTR(ce_count,S_IRUGO,mci_ce_count_show,NULL); |
| |
| static struct mcidev_attribute *mci_attr[] = { |
| &mci_attr_reset_counters, |
| &mci_attr_mc_name, |
| &mci_attr_size_mb, |
| &mci_attr_seconds_since_reset, |
| &mci_attr_ue_noinfo_count, |
| &mci_attr_ce_noinfo_count, |
| &mci_attr_ue_count, |
| &mci_attr_ce_count, |
| NULL |
| }; |
| |
| /* |
| * Release of a MC controlling instance |
| */ |
| static void edac_mci_instance_release(struct kobject *kobj) |
| { |
| struct mem_ctl_info *mci; |
| |
| mci = to_mci(kobj); |
| debugf0("%s() idx=%d\n", __func__, mci->mc_idx); |
| complete(&mci->kobj_complete); |
| } |
| |
| static struct kobj_type ktype_mci = { |
| .release = edac_mci_instance_release, |
| .sysfs_ops = &mci_ops, |
| .default_attrs = (struct attribute **) mci_attr, |
| }; |
| |
| |
| #define EDAC_DEVICE_SYMLINK "device" |
| |
| /* |
| * Create a new Memory Controller kobject instance, |
| * mc<id> under the 'mc' directory |
| * |
| * Return: |
| * 0 Success |
| * !0 Failure |
| */ |
| static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) |
| { |
| int i; |
| int err; |
| struct csrow_info *csrow; |
| struct kobject *edac_mci_kobj=&mci->edac_mci_kobj; |
| |
| debugf0("%s() idx=%d\n", __func__, mci->mc_idx); |
| memset(edac_mci_kobj, 0, sizeof(*edac_mci_kobj)); |
| |
| /* set the name of the mc<id> object */ |
| err = kobject_set_name(edac_mci_kobj,"mc%d",mci->mc_idx); |
| if (err) |
| return err; |
| |
| /* link to our parent the '..../edac/mc' object */ |
| edac_mci_kobj->parent = &edac_memctrl_kobj; |
| edac_mci_kobj->ktype = &ktype_mci; |
| |
| /* register the mc<id> kobject */ |
| err = kobject_register(edac_mci_kobj); |
| if (err) |
| return err; |
| |
| /* create a symlink for the device */ |
| err = sysfs_create_link(edac_mci_kobj, &mci->dev->kobj, |
| EDAC_DEVICE_SYMLINK); |
| if (err) |
| goto fail0; |
| |
| /* Make directories for each CSROW object |
| * under the mc<id> kobject |
| */ |
| for (i = 0; i < mci->nr_csrows; i++) { |
| csrow = &mci->csrows[i]; |
| |
| /* Only expose populated CSROWs */ |
| if (csrow->nr_pages > 0) { |
| err = edac_create_csrow_object(edac_mci_kobj,csrow,i); |
| if (err) |
| goto fail1; |
| } |
| } |
| |
| return 0; |
| |
| /* CSROW error: backout what has already been registered, */ |
| fail1: |
| for ( i--; i >= 0; i--) { |
| if (csrow->nr_pages > 0) { |
| init_completion(&csrow->kobj_complete); |
| kobject_unregister(&mci->csrows[i].kobj); |
| wait_for_completion(&csrow->kobj_complete); |
| } |
| } |
| |
| fail0: |
| init_completion(&mci->kobj_complete); |
| kobject_unregister(edac_mci_kobj); |
| wait_for_completion(&mci->kobj_complete); |
| return err; |
| } |
| |
| /* |
| * remove a Memory Controller instance |
| */ |
| static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) |
| { |
| int i; |
| |
| debugf0("%s()\n", __func__); |
| |
| /* remove all csrow kobjects */ |
| for (i = 0; i < mci->nr_csrows; i++) { |
| if (mci->csrows[i].nr_pages > 0) { |
| init_completion(&mci->csrows[i].kobj_complete); |
| kobject_unregister(&mci->csrows[i].kobj); |
| wait_for_completion(&mci->csrows[i].kobj_complete); |
| } |
| } |
| |
| sysfs_remove_link(&mci->edac_mci_kobj, EDAC_DEVICE_SYMLINK); |
| init_completion(&mci->kobj_complete); |
| kobject_unregister(&mci->edac_mci_kobj); |
| wait_for_completion(&mci->kobj_complete); |
| } |
| |
| /* END OF sysfs data and methods */ |
| |
| #ifdef CONFIG_EDAC_DEBUG |
| |
| void edac_mc_dump_channel(struct channel_info *chan) |
| { |
| debugf4("\tchannel = %p\n", chan); |
| debugf4("\tchannel->chan_idx = %d\n", chan->chan_idx); |
| debugf4("\tchannel->ce_count = %d\n", chan->ce_count); |
| debugf4("\tchannel->label = '%s'\n", chan->label); |
| debugf4("\tchannel->csrow = %p\n\n", chan->csrow); |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_dump_channel); |
| |
| void edac_mc_dump_csrow(struct csrow_info *csrow) |
| { |
| debugf4("\tcsrow = %p\n", csrow); |
| debugf4("\tcsrow->csrow_idx = %d\n", csrow->csrow_idx); |
| debugf4("\tcsrow->first_page = 0x%lx\n", |
| csrow->first_page); |
| debugf4("\tcsrow->last_page = 0x%lx\n", csrow->last_page); |
| debugf4("\tcsrow->page_mask = 0x%lx\n", csrow->page_mask); |
| debugf4("\tcsrow->nr_pages = 0x%x\n", csrow->nr_pages); |
| debugf4("\tcsrow->nr_channels = %d\n", |
| csrow->nr_channels); |
| debugf4("\tcsrow->channels = %p\n", csrow->channels); |
| debugf4("\tcsrow->mci = %p\n\n", csrow->mci); |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_dump_csrow); |
| |
| void edac_mc_dump_mci(struct mem_ctl_info *mci) |
| { |
| debugf3("\tmci = %p\n", mci); |
| debugf3("\tmci->mtype_cap = %lx\n", mci->mtype_cap); |
| debugf3("\tmci->edac_ctl_cap = %lx\n", mci->edac_ctl_cap); |
| debugf3("\tmci->edac_cap = %lx\n", mci->edac_cap); |
| debugf4("\tmci->edac_check = %p\n", mci->edac_check); |
| debugf3("\tmci->nr_csrows = %d, csrows = %p\n", |
| mci->nr_csrows, mci->csrows); |
| debugf3("\tdev = %p\n", mci->dev); |
| debugf3("\tmod_name:ctl_name = %s:%s\n", |
| mci->mod_name, mci->ctl_name); |
| debugf3("\tpvt_info = %p\n\n", mci->pvt_info); |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_dump_mci); |
| |
| #endif /* CONFIG_EDAC_DEBUG */ |
| |
| /* 'ptr' points to a possibly unaligned item X such that sizeof(X) is 'size'. |
| * Adjust 'ptr' so that its alignment is at least as stringent as what the |
| * compiler would provide for X and return the aligned result. |
| * |
| * If 'size' is a constant, the compiler will optimize this whole function |
| * down to either a no-op or the addition of a constant to the value of 'ptr'. |
| */ |
| static inline char * align_ptr(void *ptr, unsigned size) |
| { |
| unsigned align, r; |
| |
| /* Here we assume that the alignment of a "long long" is the most |
| * stringent alignment that the compiler will ever provide by default. |
| * As far as I know, this is a reasonable assumption. |
| */ |
| if (size > sizeof(long)) |
| align = sizeof(long long); |
| else if (size > sizeof(int)) |
| align = sizeof(long); |
| else if (size > sizeof(short)) |
| align = sizeof(int); |
| else if (size > sizeof(char)) |
| align = sizeof(short); |
| else |
| return (char *) ptr; |
| |
| r = size % align; |
| |
| if (r == 0) |
| return (char *) ptr; |
| |
| return (char *) (((unsigned long) ptr) + align - r); |
| } |
| |
| /** |
| * edac_mc_alloc: Allocate a struct mem_ctl_info structure |
| * @size_pvt: size of private storage needed |
| * @nr_csrows: Number of CWROWS needed for this MC |
| * @nr_chans: Number of channels for the MC |
| * |
| * Everything is kmalloc'ed as one big chunk - more efficient. |
| * Only can be used if all structures have the same lifetime - otherwise |
| * you have to allocate and initialize your own structures. |
| * |
| * Use edac_mc_free() to free mc structures allocated by this function. |
| * |
| * Returns: |
| * NULL allocation failed |
| * struct mem_ctl_info pointer |
| */ |
| struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, |
| unsigned nr_chans) |
| { |
| struct mem_ctl_info *mci; |
| struct csrow_info *csi, *csrow; |
| struct channel_info *chi, *chp, *chan; |
| void *pvt; |
| unsigned size; |
| int row, chn; |
| |
| /* Figure out the offsets of the various items from the start of an mc |
| * structure. We want the alignment of each item to be at least as |
| * stringent as what the compiler would provide if we could simply |
| * hardcode everything into a single struct. |
| */ |
| mci = (struct mem_ctl_info *) 0; |
| csi = (struct csrow_info *)align_ptr(&mci[1], sizeof(*csi)); |
| chi = (struct channel_info *) |
| align_ptr(&csi[nr_csrows], sizeof(*chi)); |
| pvt = align_ptr(&chi[nr_chans * nr_csrows], sz_pvt); |
| size = ((unsigned long) pvt) + sz_pvt; |
| |
| if ((mci = kmalloc(size, GFP_KERNEL)) == NULL) |
| return NULL; |
| |
| /* Adjust pointers so they point within the memory we just allocated |
| * rather than an imaginary chunk of memory located at address 0. |
| */ |
| csi = (struct csrow_info *) (((char *) mci) + ((unsigned long) csi)); |
| chi = (struct channel_info *) (((char *) mci) + ((unsigned long) chi)); |
| pvt = sz_pvt ? (((char *) mci) + ((unsigned long) pvt)) : NULL; |
| |
| memset(mci, 0, size); /* clear all fields */ |
| mci->csrows = csi; |
| mci->pvt_info = pvt; |
| mci->nr_csrows = nr_csrows; |
| |
| for (row = 0; row < nr_csrows; row++) { |
| csrow = &csi[row]; |
| csrow->csrow_idx = row; |
| csrow->mci = mci; |
| csrow->nr_channels = nr_chans; |
| chp = &chi[row * nr_chans]; |
| csrow->channels = chp; |
| |
| for (chn = 0; chn < nr_chans; chn++) { |
| chan = &chp[chn]; |
| chan->chan_idx = chn; |
| chan->csrow = csrow; |
| } |
| } |
| |
| return mci; |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_alloc); |
| |
| /** |
| * edac_mc_free: Free a previously allocated 'mci' structure |
| * @mci: pointer to a struct mem_ctl_info structure |
| */ |
| void edac_mc_free(struct mem_ctl_info *mci) |
| { |
| kfree(mci); |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_free); |
| |
| static struct mem_ctl_info *find_mci_by_dev(struct device *dev) |
| { |
| struct mem_ctl_info *mci; |
| struct list_head *item; |
| |
| debugf3("%s()\n", __func__); |
| |
| list_for_each(item, &mc_devices) { |
| mci = list_entry(item, struct mem_ctl_info, link); |
| |
| if (mci->dev == dev) |
| return mci; |
| } |
| |
| return NULL; |
| } |
| |
| /* Return 0 on success, 1 on failure. |
| * Before calling this function, caller must |
| * assign a unique value to mci->mc_idx. |
| */ |
| static int add_mc_to_global_list (struct mem_ctl_info *mci) |
| { |
| struct list_head *item, *insert_before; |
| struct mem_ctl_info *p; |
| |
| insert_before = &mc_devices; |
| |
| if (unlikely((p = find_mci_by_dev(mci->dev)) != NULL)) |
| goto fail0; |
| |
| list_for_each(item, &mc_devices) { |
| p = list_entry(item, struct mem_ctl_info, link); |
| |
| if (p->mc_idx >= mci->mc_idx) { |
| if (unlikely(p->mc_idx == mci->mc_idx)) |
| goto fail1; |
| |
| insert_before = item; |
| break; |
| } |
| } |
| |
| list_add_tail_rcu(&mci->link, insert_before); |
| return 0; |
| |
| fail0: |
| edac_printk(KERN_WARNING, EDAC_MC, |
| "%s (%s) %s %s already assigned %d\n", p->dev->bus_id, |
| dev_name(p->dev), p->mod_name, p->ctl_name, p->mc_idx); |
| return 1; |
| |
| fail1: |
| edac_printk(KERN_WARNING, EDAC_MC, |
| "bug in low-level driver: attempt to assign\n" |
| " duplicate mc_idx %d in %s()\n", p->mc_idx, __func__); |
| return 1; |
| } |
| |
| static void complete_mc_list_del(struct rcu_head *head) |
| { |
| struct mem_ctl_info *mci; |
| |
| mci = container_of(head, struct mem_ctl_info, rcu); |
| INIT_LIST_HEAD(&mci->link); |
| complete(&mci->complete); |
| } |
| |
| static void del_mc_from_global_list(struct mem_ctl_info *mci) |
| { |
| list_del_rcu(&mci->link); |
| init_completion(&mci->complete); |
| call_rcu(&mci->rcu, complete_mc_list_del); |
| wait_for_completion(&mci->complete); |
| } |
| |
| /** |
| * edac_mc_add_mc: Insert the 'mci' structure into the mci global list and |
| * create sysfs entries associated with mci structure |
| * @mci: pointer to the mci structure to be added to the list |
| * @mc_idx: A unique numeric identifier to be assigned to the 'mci' structure. |
| * |
| * Return: |
| * 0 Success |
| * !0 Failure |
| */ |
| |
| /* FIXME - should a warning be printed if no error detection? correction? */ |
| int edac_mc_add_mc(struct mem_ctl_info *mci, int mc_idx) |
| { |
| debugf0("%s()\n", __func__); |
| mci->mc_idx = mc_idx; |
| #ifdef CONFIG_EDAC_DEBUG |
| if (edac_debug_level >= 3) |
| edac_mc_dump_mci(mci); |
| |
| if (edac_debug_level >= 4) { |
| int i; |
| |
| for (i = 0; i < mci->nr_csrows; i++) { |
| int j; |
| |
| edac_mc_dump_csrow(&mci->csrows[i]); |
| for (j = 0; j < mci->csrows[i].nr_channels; j++) |
| edac_mc_dump_channel( |
| &mci->csrows[i].channels[j]); |
| } |
| } |
| #endif |
| down(&mem_ctls_mutex); |
| |
| if (add_mc_to_global_list(mci)) |
| goto fail0; |
| |
| /* set load time so that error rate can be tracked */ |
| mci->start_time = jiffies; |
| |
| if (edac_create_sysfs_mci_device(mci)) { |
| edac_mc_printk(mci, KERN_WARNING, |
| "failed to create sysfs device\n"); |
| goto fail1; |
| } |
| |
| /* Report action taken */ |
| edac_mc_printk(mci, KERN_INFO, "Giving out device to %s %s: DEV %s\n", |
| mci->mod_name, mci->ctl_name, dev_name(mci->dev)); |
| |
| up(&mem_ctls_mutex); |
| return 0; |
| |
| fail1: |
| del_mc_from_global_list(mci); |
| |
| fail0: |
| up(&mem_ctls_mutex); |
| return 1; |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_add_mc); |
| |
| /** |
| * edac_mc_del_mc: Remove sysfs entries for specified mci structure and |
| * remove mci structure from global list |
| * @pdev: Pointer to 'struct device' representing mci structure to remove. |
| * |
| * Return pointer to removed mci structure, or NULL if device not found. |
| */ |
| struct mem_ctl_info * edac_mc_del_mc(struct device *dev) |
| { |
| struct mem_ctl_info *mci; |
| |
| debugf0("MC: %s()\n", __func__); |
| down(&mem_ctls_mutex); |
| |
| if ((mci = find_mci_by_dev(dev)) == NULL) { |
| up(&mem_ctls_mutex); |
| return NULL; |
| } |
| |
| edac_remove_sysfs_mci_device(mci); |
| del_mc_from_global_list(mci); |
| up(&mem_ctls_mutex); |
| edac_printk(KERN_INFO, EDAC_MC, |
| "Removed device %d for %s %s: DEV %s\n", mci->mc_idx, |
| mci->mod_name, mci->ctl_name, dev_name(mci->dev)); |
| return mci; |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_del_mc); |
| |
| void edac_mc_scrub_block(unsigned long page, unsigned long offset, u32 size) |
| { |
| struct page *pg; |
| void *virt_addr; |
| unsigned long flags = 0; |
| |
| debugf3("%s()\n", __func__); |
| |
| /* ECC error page was not in our memory. Ignore it. */ |
| if(!pfn_valid(page)) |
| return; |
| |
| /* Find the actual page structure then map it and fix */ |
| pg = pfn_to_page(page); |
| |
| if (PageHighMem(pg)) |
| local_irq_save(flags); |
| |
| virt_addr = kmap_atomic(pg, KM_BOUNCE_READ); |
| |
| /* Perform architecture specific atomic scrub operation */ |
| atomic_scrub(virt_addr + offset, size); |
| |
| /* Unmap and complete */ |
| kunmap_atomic(virt_addr, KM_BOUNCE_READ); |
| |
| if (PageHighMem(pg)) |
| local_irq_restore(flags); |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_scrub_block); |
| |
| /* FIXME - should return -1 */ |
| int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, unsigned long page) |
| { |
| struct csrow_info *csrows = mci->csrows; |
| int row, i; |
| |
| debugf1("MC%d: %s(): 0x%lx\n", mci->mc_idx, __func__, page); |
| row = -1; |
| |
| for (i = 0; i < mci->nr_csrows; i++) { |
| struct csrow_info *csrow = &csrows[i]; |
| |
| if (csrow->nr_pages == 0) |
| continue; |
| |
| debugf3("MC%d: %s(): first(0x%lx) page(0x%lx) last(0x%lx) " |
| "mask(0x%lx)\n", mci->mc_idx, __func__, |
| csrow->first_page, page, csrow->last_page, |
| csrow->page_mask); |
| |
| if ((page >= csrow->first_page) && |
| (page <= csrow->last_page) && |
| ((page & csrow->page_mask) == |
| (csrow->first_page & csrow->page_mask))) { |
| row = i; |
| break; |
| } |
| } |
| |
| if (row == -1) |
| edac_mc_printk(mci, KERN_ERR, |
| "could not look up page error address %lx\n", |
| (unsigned long) page); |
| |
| return row; |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_find_csrow_by_page); |
| |
| /* FIXME - setable log (warning/emerg) levels */ |
| /* FIXME - integrate with evlog: http://evlog.sourceforge.net/ */ |
| void edac_mc_handle_ce(struct mem_ctl_info *mci, |
| unsigned long page_frame_number, unsigned long offset_in_page, |
| unsigned long syndrome, int row, int channel, const char *msg) |
| { |
| unsigned long remapped_page; |
| |
| debugf3("MC%d: %s()\n", mci->mc_idx, __func__); |
| |
| /* FIXME - maybe make panic on INTERNAL ERROR an option */ |
| if (row >= mci->nr_csrows || row < 0) { |
| /* something is wrong */ |
| edac_mc_printk(mci, KERN_ERR, |
| "INTERNAL ERROR: row out of range " |
| "(%d >= %d)\n", row, mci->nr_csrows); |
| edac_mc_handle_ce_no_info(mci, "INTERNAL ERROR"); |
| return; |
| } |
| |
| if (channel >= mci->csrows[row].nr_channels || channel < 0) { |
| /* something is wrong */ |
| edac_mc_printk(mci, KERN_ERR, |
| "INTERNAL ERROR: channel out of range " |
| "(%d >= %d)\n", channel, |
| mci->csrows[row].nr_channels); |
| edac_mc_handle_ce_no_info(mci, "INTERNAL ERROR"); |
| return; |
| } |
| |
| if (log_ce) |
| /* FIXME - put in DIMM location */ |
| edac_mc_printk(mci, KERN_WARNING, |
| "CE page 0x%lx, offset 0x%lx, grain %d, syndrome " |
| "0x%lx, row %d, channel %d, label \"%s\": %s\n", |
| page_frame_number, offset_in_page, |
| mci->csrows[row].grain, syndrome, row, channel, |
| mci->csrows[row].channels[channel].label, msg); |
| |
| mci->ce_count++; |
| mci->csrows[row].ce_count++; |
| mci->csrows[row].channels[channel].ce_count++; |
| |
| if (mci->scrub_mode & SCRUB_SW_SRC) { |
| /* |
| * Some MC's can remap memory so that it is still available |
| * at a different address when PCI devices map into memory. |
| * MC's that can't do this lose the memory where PCI devices |
| * are mapped. This mapping is MC dependant and so we call |
| * back into the MC driver for it to map the MC page to |
| * a physical (CPU) page which can then be mapped to a virtual |
| * page - which can then be scrubbed. |
| */ |
| remapped_page = mci->ctl_page_to_phys ? |
| mci->ctl_page_to_phys(mci, page_frame_number) : |
| page_frame_number; |
| |
| edac_mc_scrub_block(remapped_page, offset_in_page, |
| mci->csrows[row].grain); |
| } |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_handle_ce); |
| |
| void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci, const char *msg) |
| { |
| if (log_ce) |
| edac_mc_printk(mci, KERN_WARNING, |
| "CE - no information available: %s\n", msg); |
| |
| mci->ce_noinfo_count++; |
| mci->ce_count++; |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_handle_ce_no_info); |
| |
| void edac_mc_handle_ue(struct mem_ctl_info *mci, |
| unsigned long page_frame_number, unsigned long offset_in_page, |
| int row, const char *msg) |
| { |
| int len = EDAC_MC_LABEL_LEN * 4; |
| char labels[len + 1]; |
| char *pos = labels; |
| int chan; |
| int chars; |
| |
| debugf3("MC%d: %s()\n", mci->mc_idx, __func__); |
| |
| /* FIXME - maybe make panic on INTERNAL ERROR an option */ |
| if (row >= mci->nr_csrows || row < 0) { |
| /* something is wrong */ |
| edac_mc_printk(mci, KERN_ERR, |
| "INTERNAL ERROR: row out of range " |
| "(%d >= %d)\n", row, mci->nr_csrows); |
| edac_mc_handle_ue_no_info(mci, "INTERNAL ERROR"); |
| return; |
| } |
| |
| chars = snprintf(pos, len + 1, "%s", |
| mci->csrows[row].channels[0].label); |
| len -= chars; |
| pos += chars; |
| |
| for (chan = 1; (chan < mci->csrows[row].nr_channels) && (len > 0); |
| chan++) { |
| chars = snprintf(pos, len + 1, ":%s", |
| mci->csrows[row].channels[chan].label); |
| len -= chars; |
| pos += chars; |
| } |
| |
| if (log_ue) |
| edac_mc_printk(mci, KERN_EMERG, |
| "UE page 0x%lx, offset 0x%lx, grain %d, row %d, " |
| "labels \"%s\": %s\n", page_frame_number, |
| offset_in_page, mci->csrows[row].grain, row, labels, |
| msg); |
| |
| if (panic_on_ue) |
| panic("EDAC MC%d: UE page 0x%lx, offset 0x%lx, grain %d, " |
| "row %d, labels \"%s\": %s\n", mci->mc_idx, |
| page_frame_number, offset_in_page, |
| mci->csrows[row].grain, row, labels, msg); |
| |
| mci->ue_count++; |
| mci->csrows[row].ue_count++; |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_handle_ue); |
| |
| void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci, const char *msg) |
| { |
| if (panic_on_ue) |
| panic("EDAC MC%d: Uncorrected Error", mci->mc_idx); |
| |
| if (log_ue) |
| edac_mc_printk(mci, KERN_WARNING, |
| "UE - no information available: %s\n", msg); |
| mci->ue_noinfo_count++; |
| mci->ue_count++; |
| } |
| EXPORT_SYMBOL_GPL(edac_mc_handle_ue_no_info); |
| |
| |
| /* |
| * Iterate over all MC instances and check for ECC, et al, errors |
| */ |
| static inline void check_mc_devices(void) |
| { |
| struct list_head *item; |
| struct mem_ctl_info *mci; |
| |
| debugf3("%s()\n", __func__); |
| down(&mem_ctls_mutex); |
| |
| list_for_each(item, &mc_devices) { |
| mci = list_entry(item, struct mem_ctl_info, link); |
| |
| if (mci->edac_check != NULL) |
| mci->edac_check(mci); |
| } |
| |
| up(&mem_ctls_mutex); |
| } |
| |
| /* |
| * Check MC status every poll_msec. |
| * Check PCI status every poll_msec as well. |
| * |
| * This where the work gets done for edac. |
| * |
| * SMP safe, doesn't use NMI, and auto-rate-limits. |
| */ |
| static void do_edac_check(void) |
| { |
| debugf3("%s()\n", __func__); |
| check_mc_devices(); |
| do_pci_parity_check(); |
| } |
| |
| static int edac_kernel_thread(void *arg) |
| { |
| while (!kthread_should_stop()) { |
| do_edac_check(); |
| |
| /* goto sleep for the interval */ |
| schedule_timeout_interruptible((HZ * poll_msec) / 1000); |
| try_to_freeze(); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * edac_mc_init |
| * module initialization entry point |
| */ |
| static int __init edac_mc_init(void) |
| { |
| edac_printk(KERN_INFO, EDAC_MC, EDAC_MC_VERSION "\n"); |
| |
| /* |
| * Harvest and clear any boot/initialization PCI parity errors |
| * |
| * FIXME: This only clears errors logged by devices present at time of |
| * module initialization. We should also do an initial clear |
| * of each newly hotplugged device. |
| */ |
| clear_pci_parity_errors(); |
| |
| /* Create the MC sysfs entries */ |
| if (edac_sysfs_memctrl_setup()) { |
| edac_printk(KERN_ERR, EDAC_MC, |
| "Error initializing sysfs code\n"); |
| return -ENODEV; |
| } |
| |
| /* Create the PCI parity sysfs entries */ |
| if (edac_sysfs_pci_setup()) { |
| edac_sysfs_memctrl_teardown(); |
| edac_printk(KERN_ERR, EDAC_MC, |
| "EDAC PCI: Error initializing sysfs code\n"); |
| return -ENODEV; |
| } |
| |
| /* create our kernel thread */ |
| edac_thread = kthread_run(edac_kernel_thread, NULL, "kedac"); |
| |
| if (IS_ERR(edac_thread)) { |
| /* remove the sysfs entries */ |
| edac_sysfs_memctrl_teardown(); |
| edac_sysfs_pci_teardown(); |
| return PTR_ERR(edac_thread); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * edac_mc_exit() |
| * module exit/termination functioni |
| */ |
| static void __exit edac_mc_exit(void) |
| { |
| debugf0("%s()\n", __func__); |
| kthread_stop(edac_thread); |
| |
| /* tear down the sysfs device */ |
| edac_sysfs_memctrl_teardown(); |
| edac_sysfs_pci_teardown(); |
| } |
| |
| module_init(edac_mc_init); |
| module_exit(edac_mc_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh et al\n" |
| "Based on work by Dan Hollis et al"); |
| MODULE_DESCRIPTION("Core library routines for MC reporting"); |
| |
| module_param(panic_on_ue, int, 0644); |
| MODULE_PARM_DESC(panic_on_ue, "Panic on uncorrected error: 0=off 1=on"); |
| #ifdef CONFIG_PCI |
| module_param(check_pci_parity, int, 0644); |
| MODULE_PARM_DESC(check_pci_parity, "Check for PCI bus parity errors: 0=off 1=on"); |
| module_param(panic_on_pci_parity, int, 0644); |
| MODULE_PARM_DESC(panic_on_pci_parity, "Panic on PCI Bus Parity error: 0=off 1=on"); |
| #endif |
| module_param(log_ue, int, 0644); |
| MODULE_PARM_DESC(log_ue, "Log uncorrectable error to console: 0=off 1=on"); |
| module_param(log_ce, int, 0644); |
| MODULE_PARM_DESC(log_ce, "Log correctable error to console: 0=off 1=on"); |
| module_param(poll_msec, int, 0644); |
| MODULE_PARM_DESC(poll_msec, "Polling period in milliseconds"); |
| #ifdef CONFIG_EDAC_DEBUG |
| module_param(edac_debug_level, int, 0644); |
| MODULE_PARM_DESC(edac_debug_level, "Debug level"); |
| #endif |