ASoC: rt286: Fix capture volume setting issue
The purpose of rt286_adc_event is to mute/numnte the ADC mixer.
However, it will also set the capture volume to default value.
As a result, "ADC0 Capture Volume" is not working if it is set
before capture start. This patch remove rt286_adc_event and add
"ADC0 Capture Switch" to mute/unmute ADC mixer.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index 1d1c7f8..847cc4b 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -417,6 +417,8 @@
static const struct snd_kcontrol_new rt286_snd_controls[] = {
SOC_DOUBLE_R_TLV("DAC0 Playback Volume", RT286_DACL_GAIN,
RT286_DACR_GAIN, 0, 0x7f, 0, out_vol_tlv),
+ SOC_DOUBLE_R("ADC0 Capture Switch", RT286_ADCL_GAIN,
+ RT286_ADCR_GAIN, 7, 1, 1),
SOC_DOUBLE_R_TLV("ADC0 Capture Volume", RT286_ADCL_GAIN,
RT286_ADCR_GAIN, 0, 0x7f, 0, out_vol_tlv),
SOC_SINGLE_TLV("AMIC Volume", RT286_MIC_GAIN,
@@ -538,32 +540,6 @@
return 0;
}
-static int rt286_adc_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
-{
- struct snd_soc_codec *codec = w->codec;
- unsigned int nid;
-
- nid = (w->reg >> 20) & 0xff;
-
- switch (event) {
- case SND_SOC_DAPM_POST_PMU:
- snd_soc_update_bits(codec,
- VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, nid, 0),
- 0x7080, 0x7000);
- break;
- case SND_SOC_DAPM_PRE_PMD:
- snd_soc_update_bits(codec,
- VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, nid, 0),
- 0x7080, 0x7080);
- break;
- default:
- return 0;
- }
-
- return 0;
-}
-
static int rt286_vref_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
@@ -667,12 +643,10 @@
SND_SOC_DAPM_ADC("ADC 1", NULL, SND_SOC_NOPM, 0, 0),
/* ADC Mux */
- SND_SOC_DAPM_MUX_E("ADC 0 Mux", RT286_SET_POWER(RT286_ADC_IN1), 0, 1,
- &rt286_adc0_mux, rt286_adc_event, SND_SOC_DAPM_PRE_PMD |
- SND_SOC_DAPM_POST_PMU),
- SND_SOC_DAPM_MUX_E("ADC 1 Mux", RT286_SET_POWER(RT286_ADC_IN2), 0, 1,
- &rt286_adc1_mux, rt286_adc_event, SND_SOC_DAPM_PRE_PMD |
- SND_SOC_DAPM_POST_PMU),
+ SND_SOC_DAPM_MUX("ADC 0 Mux", RT286_SET_POWER(RT286_ADC_IN1), 0, 1,
+ &rt286_adc0_mux),
+ SND_SOC_DAPM_MUX("ADC 1 Mux", RT286_SET_POWER(RT286_ADC_IN2), 0, 1,
+ &rt286_adc1_mux),
/* Audio Interface */
SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),