[ARM] 3226/1: IXP4xx runtime expansion bus window size configuration
Patch from Deepak Saxena
The expansion bus on the IXP46x NPU can be configured for either 32MiB or
16MiB windows and changing the configuration causes the base address for
each chip select for each region to change. Because of this, we cannot
hardcode the physical base as we currently do. This patch checks the
expansion bus configuration registers at runtime to determine the
appropriate window size. Note that this requires that the bootloader
already configured the device sizes appropriately, but I feel that is
valid assumption to make as the bootloader must configure and access
the flash window, the output display (LCD, LEDs, etc) window, and
other expansion bus devices.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 9f33cb2..6b39369 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -332,11 +332,27 @@
&ixp46x_i2c_controller
};
+unsigned long ixp4xx_exp_bus_size;
+
void __init ixp4xx_sys_init(void)
{
+ ixp4xx_exp_bus_size = SZ_16M;
+
if (cpu_is_ixp46x()) {
+ int region;
+
platform_add_devices(ixp46x_devices,
ARRAY_SIZE(ixp46x_devices));
+
+ for (region = 0; region < 7; region++) {
+ if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
+ ixp4xx_exp_bus_size = SZ_32M;
+ break;
+ }
+ }
}
+
+ printk("IXP4xx: Using %uMiB expansion bus window size\n",
+ ixp4xx_exp_bus_size >> 20);
}
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 050c927..679594a 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -14,6 +14,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -30,8 +31,6 @@
};
static struct resource coyote_flash_resource = {
- .start = COYOTE_FLASH_BASE,
- .end = COYOTE_FLASH_BASE + COYOTE_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
@@ -81,6 +80,11 @@
static void __init coyote_init(void)
{
+ ixp4xx_sys_init();
+
+ coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
@@ -91,8 +95,6 @@
coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
}
-
- ixp4xx_sys_init();
platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
}
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 29a6d02..0386704 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -27,6 +27,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -106,11 +107,9 @@
.width = 2,
};
-static struct resource gtwx5715_flash_resource = {
- .start = GTWX5715_FLASH_BASE,
- .end = GTWX5715_FLASH_BASE + GTWX5715_FLASH_SIZE - 1,
+static struct gtw5715_flash_resource = {
.flags = IORESOURCE_MEM,
-};
+}
static struct platform_device gtwx5715_flash = {
.name = "IXP4XX-Flash",
@@ -129,6 +128,14 @@
static void __init gtwx5715_init(void)
{
+ ixp4xx_sys_init();
+
+ if (!flash_resource)
+ printk(KERN_ERR "Could not allocate flash resource\n");
+
+ gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
+
platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
}
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 3a22d84e..c2e105c 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -14,6 +14,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -30,8 +31,6 @@
};
static struct resource ixdp425_flash_resource = {
- .start = IXDP425_FLASH_BASE,
- .end = IXDP425_FLASH_BASE + IXDP425_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
@@ -108,17 +107,13 @@
&ixdp425_uart
};
-
static void __init ixdp425_init(void)
{
ixp4xx_sys_init();
- /*
- * IXP465 has 32MB window
- */
- if (machine_is_ixdp465()) {
- ixdp425_flash_resource.end += IXDP425_FLASH_SIZE;
- }
+ ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ ixdp425_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
}
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index bde9648..49998a8 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -26,8 +26,6 @@
};
static struct resource nas100d_flash_resource = {
- .start = NAS100D_FLASH_BASE,
- .end = NAS100D_FLASH_BASE + NAS100D_FLASH_SIZE,
.flags = IORESOURCE_MEM,
};
@@ -115,6 +113,10 @@
{
ixp4xx_sys_init();
+ nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ nas100d_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
pm_power_off = nas100d_power_off;
platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));