V4L/DVB (4835): Added support for the Terratec Cinergy HT PCMCIA module
This is a hybrid cardbus module. Besides the card support, i
modified the definition names for AGC and GPIO of the tda10046.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index ef67ace..f6201cc 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -103,3 +103,4 @@
102 -> Avermedia AVerTV Studio 507 [1461:9715]
103 -> Compro Videomate DVB-T200A
104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid [0070:6701]
+105 -> Terratec Cinergy HT PCMCIA [153b:1172]
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 11e0dca..00e4bcd 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -648,18 +648,24 @@
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities
break;
- case TDA10046_AGC_TDA827X:
+ case TDA10046_AGC_TDA827X_GP11:
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
break;
- case TDA10046_AGC_TDA827X_GPL:
+ case TDA10046_AGC_TDA827X_GP00:
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
break;
+ case TDA10046_AGC_TDA827X_GP01:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x62); // set AGC polarities
+ break;
}
tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index 605ad2d..ec502d7 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -35,8 +35,9 @@
TDA10046_AGC_DEFAULT, /* original configuration */
TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */
TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */
- TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */
- TDA10046_AGC_TDA827X_GPL, /* same as above, but GPIOs 0 */
+ TDA10046_AGC_TDA827X_GP11, /* IF AGC only, special setup for tda827x */
+ TDA10046_AGC_TDA827X_GP00, /* same as above, but GPIOs 0 */
+ TDA10046_AGC_TDA827X_GP01, /* same as above, but GPIO3=0 GPIO1=1*/
};
enum tda10046_if {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index d8d8142..d0ddc65 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3148,6 +3148,29 @@
.gpio = 0x0200000,
},
},
+ [SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
+ .name = "Terratec Cinergy HT PCMCIA",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE1,
+ }},
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3781,6 +3804,12 @@
.subdevice = 0x6701,
.driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x153b,
+ .subdevice = 0x1172,
+ .driver_data = SAA7134_BOARD_CINERGY_HT_PCMCIA,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -4107,6 +4136,14 @@
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
+ case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+ /* make the tda10046 find its eeprom */
+ {
+ u8 data[] = { 0x3c, 0x33, 0x60};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ }
+ break;
case SAA7134_BOARD_KWORLD_ATSC110:
{
/* enable tuner */
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index a51264f..ce888f7 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -677,7 +677,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -881,7 +881,40 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = NULL,
+};
+/* ------------------------------------------------------------------ */
+
+static int cinergy_ht_tuner_init(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 data[] = { 0x3c, 0x33, 0x62};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+ if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static int cinergy_ht_tuner_sleep(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 data[] = { 0x3c, 0x33, 0x60};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ philips_tda827xa_tuner_sleep( 0x61, fe);
+ return 0;
+}
+
+static struct tda1004x_config cinergy_ht_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X_GP01,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -893,7 +926,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = philips_tda1004x_request_firmware,
};
@@ -905,7 +938,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = philips_tda1004x_request_firmware,
};
@@ -917,7 +950,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = philips_tda1004x_request_firmware,
};
@@ -969,7 +1002,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .agc_config = TDA10046_AGC_TDA827X_GP00,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -1006,7 +1039,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .agc_config = TDA10046_AGC_TDA827X_GP00,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -1031,7 +1064,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -1076,7 +1109,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -1362,6 +1395,18 @@
dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
+ case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &cinergy_ht_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ dev->dvb.frontend->ops.tuner_ops.init = cinergy_ht_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.sleep = cinergy_ht_tuner_sleep;
+ dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+
+ }
+ break;
default:
printk("%s: Huh? unknown DVB card?\n",dev->name);
break;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index fee7512..e88ad7b 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -230,7 +230,8 @@
#define SAA7134_BOARD_PINNACLE_PCTV_310i 101
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102
#define SAA7134_BOARD_VIDEOMATE_DVBT_200A 103
-#define SAA7134_BOARD_HAUPPAUGE_HVR1110 104
+#define SAA7134_BOARD_HAUPPAUGE_HVR1110 104
+#define SAA7134_BOARD_CINERGY_HT_PCMCIA 105
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8