diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2f2ce0c..455bd1f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,7 @@
 config BASLER_EXCITE
 	bool "Basler eXcite smart camera"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_COHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -49,6 +50,7 @@
 config BCM47XX
 	bool "BCM47XX based boards"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -66,6 +68,7 @@
 config MIPS_COBALT
 	bool "Cobalt Server"
 	select CEVT_R4K
+	select CSRC_R4K
 	select CEVT_GT641XX
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -85,6 +88,7 @@
 	bool "DECstations"
 	select BOOT_ELF32
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select NO_IOPORT
 	select IRQ_CPU
@@ -117,6 +121,7 @@
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
 	select CEVT_R4K
+	select CSRC_R4K
 	select GENERIC_ISA_DMA
 	select IRQ_CPU
 	select I8253
@@ -137,6 +142,7 @@
 config LASAT
 	bool "LASAT Networks platforms"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
@@ -154,6 +160,7 @@
 	bool "Lemote Fulong mini-PC"
 	select ARCH_SPARSEMEM_ENABLE
 	select CEVT_R4K
+	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2
 	select DMA_NONCOHERENT
 	select BOOT_ELF32
@@ -179,6 +186,7 @@
 	bool "MIPS Atlas board"
 	select BOOT_ELF32
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select IRQ_CPU
@@ -210,6 +218,7 @@
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select IRQ_CPU
@@ -241,6 +250,7 @@
 config MIPS_SEAD
 	bool "MIPS SEAD board"
 	select CEVT_R4K
+	select CSRC_R4K
 	select IRQ_CPU
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
@@ -260,6 +270,7 @@
 config MIPS_SIM
 	bool 'MIPS simulator (MIPSsim)'
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select IRQ_CPU
@@ -278,6 +289,7 @@
 config MARKEINS
 	bool "NEC EMMA2RH Mark-eins"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -293,6 +305,7 @@
 config MACH_VR41XX
 	bool "NEC VR4100 series based machines"
 	select CEVT_R4K
+	select CSRC_R4K
 	select SYS_HAS_CPU_VR41XX
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
@@ -330,6 +343,7 @@
 config PMC_YOSEMITE
 	bool "PMC-Sierra Yosemite eval board"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_COHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -351,6 +365,7 @@
 config QEMU
 	bool "Qemu"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_COHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_STD_PC_SERIAL_PORT
@@ -382,9 +397,11 @@
 	select ARC32
 	select BOOT_ELF32
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select HW_HAS_EISA
 	select I8253
+	select I8259
 	select IP22_CPU_SCACHE
 	select IRQ_CPU
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
@@ -427,6 +444,7 @@
 	select ARC32
 	select BOOT_ELF32
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -498,6 +516,7 @@
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select ZONE_DMA32 if 64BIT
 
 config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
@@ -548,6 +567,7 @@
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select ZONE_DMA32 if 64BIT
 
 config SNI_RM
 	bool "SNI RM200/300/400"
@@ -556,6 +576,7 @@
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select HW_HAS_EISA
@@ -599,6 +620,7 @@
 config TOSHIBA_RBTX4927
 	bool "Toshiba RBTX49[23]7 board"
 	select CEVT_R4K
+	select CSRC_R4K
 	select CEVT_TXX9
 	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
@@ -621,6 +643,7 @@
 config TOSHIBA_RBTX4938
 	bool "Toshiba RBTX4938 board"
 	select CEVT_R4K
+	select CSRC_R4K
 	select CEVT_TXX9
 	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
@@ -642,6 +665,7 @@
 config WR_PPMC
 	bool "Wind River PPMC board"
 	select CEVT_R4K
+	select CSRC_R4K
 	select IRQ_CPU
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
@@ -752,6 +776,9 @@
 config CSRC_BCM1480
 	bool
 
+config CSRC_R4K
+	bool
+
 config CSRC_SB1250
 	bool
 
@@ -1640,6 +1667,9 @@
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
+config ARCH_POPULATES_NODE_MAP
+	def_bool y
+
 config ARCH_SPARSEMEM_ENABLE
 	bool
 	select SPARSEMEM_STATIC
@@ -1945,6 +1975,9 @@
 config PCSPEAKER
 	bool
 
+config ZONE_DMA32
+	bool
+
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index b36cec58..05d1354 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -138,6 +138,7 @@
 	bool
 	select 64BIT_PHYS_ADDR
 	select CEVT_R4K
+	select CSRC_R4K
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index b551535..ffa0836 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -14,6 +14,7 @@
 obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
 obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
 obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
+obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 
 binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
@@ -43,6 +44,7 @@
 obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SMP_UP)		+= smp-up.o
 
 obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
 obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index bab935a..24a2d90 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -219,7 +219,7 @@
 	return 1;
 }
 
-void __cpuinit mips_clockevent_init(void)
+int __cpuinit mips_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
 	unsigned int cpu = smp_processor_id();
@@ -227,7 +227,7 @@
 	unsigned int irq;
 
 	if (!cpu_has_counter || !mips_hpt_frequency)
-		return;
+		return -ENXIO;
 
 #ifdef CONFIG_MIPS_MT_SMTC
 	setup_smtc_dummy_clockevent_device();
@@ -237,11 +237,11 @@
 	 * device.
 	 */
 	if (cpu)
-		return;
+		return 0;
 #endif
 
 	if (!c0_compare_int_usable())
-		return;
+		return -ENXIO;
 
 	/*
 	 * With vectored interrupts things are getting platform specific.
@@ -276,8 +276,8 @@
 
 	clockevents_register_device(cd);
 
-	if (!cp0_timer_irq_installed)
-		return;
+	if (cp0_timer_irq_installed)
+		return 0;
 
 	cp0_timer_irq_installed = 1;
 
@@ -287,4 +287,6 @@
 #else
 	setup_irq(irq, &c0_compare_irqaction);
 #endif
+
+	return 0;
 }
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
new file mode 100644
index 0000000..74c5c62
--- /dev/null
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+
+static cycle_t c0_hpt_read(void)
+{
+	return read_c0_count();
+}
+
+static struct clocksource clocksource_mips = {
+	.name		= "MIPS",
+	.read		= c0_hpt_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init init_mips_clocksource(void)
+{
+	/* Calclate a somewhat reasonable rating value */
+	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
+
+	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
+
+	clocksource_register(&clocksource_mips);
+}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index a06a27d..7f6ddcb 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -269,7 +269,7 @@
 
 static void __init bootmem_init(void)
 {
-	unsigned long reserved_end;
+	unsigned long init_begin, reserved_end;
 	unsigned long mapstart = ~0UL;
 	unsigned long bootmap_size;
 	int i;
@@ -342,6 +342,35 @@
 	 */
 	bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart,
 					 min_low_pfn, max_low_pfn);
+
+
+	init_begin = PFN_UP(__pa_symbol(&__init_begin));
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		unsigned long start, end;
+
+		start = PFN_UP(boot_mem_map.map[i].addr);
+		end = PFN_DOWN(boot_mem_map.map[i].addr
+				+ boot_mem_map.map[i].size);
+
+		if (start <= init_begin)
+			start = init_begin;
+		if (start >= end)
+			continue;
+
+#ifndef CONFIG_HIGHMEM
+		if (end > max_low_pfn)
+			end = max_low_pfn;
+
+		/*
+		 * ... finally, is the area going away?
+		 */
+		if (end <= start)
+			continue;
+#endif
+
+		add_active_range(0, start, end);
+	}
+
 	/*
 	 * Register fully available low RAM pages with the bootmem allocator.
 	 */
diff --git a/arch/mips/kernel/smp-up.c b/arch/mips/kernel/smp-up.c
new file mode 100644
index 0000000..ead6c30
--- /dev/null
+++ b/arch/mips/kernel/smp-up.c
@@ -0,0 +1,67 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Symmetric Uniprocessor (TM) Support
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+/*
+ * Send inter-processor interrupt
+ */
+void up_send_ipi_single(int cpu, unsigned int action)
+{
+	panic(KERN_ERR "%s called", __func__);
+}
+
+static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	panic(KERN_ERR "%s called", __func__);
+}
+
+/*
+ *  After we've done initial boot, this function is called to allow the
+ *  board code to clean up state, if needed
+ */
+void __cpuinit up_init_secondary(void)
+{
+}
+
+void __cpuinit up_smp_finish(void)
+{
+}
+
+/* Hook for after all CPUs are online */
+void up_cpus_done(void)
+{
+}
+
+/*
+ * Firmware CPU startup hook
+ */
+void __cpuinit up_boot_secondary(int cpu, struct task_struct *idle)
+{
+}
+
+void __init up_smp_setup(void)
+{
+}
+
+void __init up_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops up_smp_ops = {
+	.send_ipi_single	= up_send_ipi_single,
+	.send_ipi_mask		= up_send_ipi_mask,
+	.init_secondary		= up_init_secondary,
+	.smp_finish		= up_smp_finish,
+	.cpus_done		= up_cpus_done,
+	.boot_secondary		= up_boot_secondary,
+	.smp_setup		= up_smp_setup,
+	.prepare_cpus		= up_prepare_cpus,
+};
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 3284b9b..5207542 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -50,14 +50,6 @@
 	return rtc_mips_set_mmss(now.tv_sec);
 }
 
-/*
- * High precision timer functions for a R4k-compatible timer.
- */
-static cycle_t c0_hpt_read(void)
-{
-	return read_c0_count();
-}
-
 int (*mips_timer_state)(void);
 
 int null_perf_irq(void)
@@ -84,55 +76,6 @@
 
 unsigned int mips_hpt_frequency;
 
-static struct clocksource clocksource_mips = {
-	.name		= "MIPS",
-	.read		= c0_hpt_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static unsigned int __init calibrate_hpt(void)
-{
-	cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
-
-	const int loops = HZ / 10;
-	int log_2_loops = 0;
-	int i;
-
-	/*
-	 * We want to calibrate for 0.1s, but to avoid a 64-bit
-	 * division we round the number of loops up to the nearest
-	 * power of 2.
-	 */
-	while (loops > 1 << log_2_loops)
-		log_2_loops++;
-	i = 1 << log_2_loops;
-
-	/*
-	 * Wait for a rising edge of the timer interrupt.
-	 */
-	while (mips_timer_state());
-	while (!mips_timer_state());
-
-	/*
-	 * Now see how many high precision timer ticks happen
-	 * during the calculated number of periods between timer
-	 * interrupts.
-	 */
-	hpt_start = clocksource_mips.read();
-	do {
-		while (mips_timer_state());
-		while (!mips_timer_state());
-	} while (--i);
-	hpt_end = clocksource_mips.read();
-
-	hpt_count = (hpt_end - hpt_start) & clocksource_mips.mask;
-	hz = HZ;
-	frequency = hpt_count * hz;
-
-	return frequency >> log_2_loops;
-}
-
 void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
 {
 	u64 temp;
@@ -166,16 +109,6 @@
 	cd->mult = (u32) temp;
 }
 
-static void __init init_mips_clocksource(void)
-{
-	/* Calclate a somewhat reasonable rating value */
-	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
-
-	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
-	clocksource_register(&clocksource_mips);
-}
-
 void __init __weak plat_time_init(void)
 {
 }
@@ -194,21 +127,42 @@
 	BUG();
 }
 
+static __init int cpu_has_mfc0_count_bug(void)
+{
+	switch (current_cpu_type()) {
+	case CPU_R4000PC:
+	case CPU_R4000SC:
+	case CPU_R4000MC:
+		/*
+		 * V3.0 is documented as suffering from the mfc0 from count bug.
+		 * Afaik this is the last version of the R4000.  Later versions
+		 * were marketed as R4400.
+		 */
+		return 1;
+
+	case CPU_R4400PC:
+	case CPU_R4400SC:
+	case CPU_R4400MC:
+		/*
+		 * The published errata for the R4400 upto 3.0 say the CPU
+		 * has the mfc0 from count bug.
+		 */
+		if ((current_cpu_data.processor_id & 0xff) <= 0x30)
+			return 1;
+
+		/*
+		 * I don't have erratas for newer R4400 so be paranoid.
+		 */
+		return 1;
+	}
+
+	return 0;
+}
+
 void __init time_init(void)
 {
 	plat_time_init();
 
-	if (cpu_has_counter && (mips_hpt_frequency || mips_timer_state)) {
-		/* We know counter frequency.  Or we can get it.  */
-		if (!mips_hpt_frequency)
-			mips_hpt_frequency = calibrate_hpt();
-
-		/* Report the high precision timer rate for a reference.  */
-		printk("Using %u.%03u MHz high precision timer.\n",
-		       ((mips_hpt_frequency + 500) / 1000) / 1000,
-		       ((mips_hpt_frequency + 500) / 1000) % 1000);
+	if (mips_clockevent_init() || !cpu_has_mfc0_count_bug())
 		init_mips_clocksource();
-	}
-
-	mips_clockevent_init();
 }
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 38bd33f..c06eb81 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -470,7 +470,7 @@
 			 */
  			if (v != l->value) {
 				printk(KERN_DEBUG "VPE loader: "
-				       "apply_r_mips_lo16/hi16: 	"
+				       "apply_r_mips_lo16/hi16: \t"
 				       "inconsistent value information\n");
 				return -ENOEXEC;
 			}
@@ -629,7 +629,7 @@
 			break;
 
 		case SHN_MIPS_SCOMMON:
-			printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON"
+			printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON "
 			       "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
 			       sym[i].st_shndx);
 			// .sbss section
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index 946aee3..cb1b682 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -108,6 +108,7 @@
 	ax.rv.si = r;
 	va_start(ax.ap, op);
 	ieee754_xcpt(&ax);
+	va_end(ax.ap);
 	return ax.rv.si;
 }
 
@@ -122,5 +123,6 @@
 	ax.rv.di = r;
 	va_start(ax.ap, op);
 	ieee754_xcpt(&ax);
+	va_end(ax.ap);
 	return ax.rv.di;
 }
diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c
index 3e214aa..6d2d89f 100644
--- a/arch/mips/math-emu/ieee754dp.c
+++ b/arch/mips/math-emu/ieee754dp.c
@@ -57,6 +57,7 @@
 	ax.rv.dp = r;
 	va_start(ax.ap, op);
 	ieee754_xcpt(&ax);
+	va_end(ax.ap);
 	return ax.rv.dp;
 }
 
@@ -83,6 +84,7 @@
 	ax.rv.dp = r;
 	va_start(ax.ap, op);
 	ieee754_xcpt(&ax);
+	va_end(ax.ap);
 	return ax.rv.dp;
 }
 
diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c
index adda851..4635340 100644
--- a/arch/mips/math-emu/ieee754sp.c
+++ b/arch/mips/math-emu/ieee754sp.c
@@ -58,6 +58,7 @@
 	ax.rv.sp = r;
 	va_start(ax.ap, op);
 	ieee754_xcpt(&ax);
+	va_end(ax.ap);
 	return ax.rv.sp;
 }
 
@@ -84,6 +85,7 @@
 	ax.rv.sp = r;
 	va_start(ax.ap, op);
 	ieee754_xcpt(&ax);
+	va_end(ax.ap);
 	return ax.rv.sp;
 }
 
diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index bfaafa3..e39bbe9 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -101,9 +101,7 @@
 
 void __init plat_time_init(void)
 {
-	unsigned int est_freq, flags;
-
-	local_irq_save(flags);
+	unsigned int est_freq;
 
 	/* Set Data mode - binary. */
 	CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
@@ -114,6 +112,4 @@
 	       (est_freq % 1000000) * 100 / 1000000);
 
 	cpu_khz = est_freq / 1000;
-
-	local_irq_restore(flags);
 }
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 33519ce..ae76795 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -40,16 +40,38 @@
 	       current_cpu_type() == CPU_R12000);
 }
 
+static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
+{
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
+
+#ifdef CONFIG_ZONE_DMA32
+	if (dev == NULL)
+		gfp |= __GFP_DMA;
+	else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
+		gfp |= __GFP_DMA;
+	else
+#endif
+#ifdef CONFIG_ZONE_DMA32
+	     if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
+		gfp |= __GFP_DMA32;
+	else
+#endif
+		;
+
+	/* Don't invoke OOM killer */
+	gfp |= __GFP_NORETRY;
+
+	return gfp;
+}
+
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
 	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 
-	/* ignore region specifiers */
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+	gfp = massage_gfp_flags(dev, gfp);
 
-	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
-		gfp |= GFP_DMA;
 	ret = (void *) __get_free_pages(gfp, get_order(size));
 
 	if (ret != NULL) {
@@ -67,11 +89,8 @@
 {
 	void *ret;
 
-	/* ignore region specifiers */
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+	gfp = massage_gfp_flags(dev, gfp);
 
-	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
-		gfp |= GFP_DMA;
 	ret = (void *) __get_free_pages(gfp, get_order(size));
 
 	if (ret) {
@@ -343,7 +362,7 @@
 	 * so we can't guarantee allocations that must be
 	 * within a tighter range than GFP_DMA..
 	 */
-	if (mask < 0x00ffffff)
+	if (mask < DMA_BIT_MASK(24))
 		return 0;
 
 	return 1;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index ec3b9e9..480dec0 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -347,11 +347,8 @@
 
 void __init paging_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-#ifndef CONFIG_FLATMEM
-	unsigned long zholes_size[MAX_NR_ZONES] = { 0, };
-	unsigned long i, j, pfn;
-#endif
+	unsigned long max_zone_pfns[MAX_NR_ZONES];
+	unsigned long lastpfn;
 
 	pagetable_init();
 
@@ -361,35 +358,27 @@
 	kmap_coherent_init();
 
 #ifdef CONFIG_ZONE_DMA
-	if (min_low_pfn < MAX_DMA_PFN && MAX_DMA_PFN <= max_low_pfn) {
-		zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn;
-		zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN;
-	} else if (max_low_pfn < MAX_DMA_PFN)
-		zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn;
-	else
+	max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
 #endif
-	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
-
+#ifdef CONFIG_ZONE_DMA32
+	max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
+#endif
+	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+	lastpfn = max_low_pfn;
 #ifdef CONFIG_HIGHMEM
-	zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn;
+	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
+	lastpfn = highend_pfn;
 
-	if (cpu_has_dc_aliases && zones_size[ZONE_HIGHMEM]) {
+	if (cpu_has_dc_aliases && max_low_pfn != highend_pfn) {
 		printk(KERN_WARNING "This processor doesn't support highmem."
-		       " %ldk highmem ignored\n", zones_size[ZONE_HIGHMEM]);
-		zones_size[ZONE_HIGHMEM] = 0;
+		       " %ldk highmem ignored\n",
+		       (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
+		max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
+		lastpfn = max_low_pfn;
 	}
 #endif
 
-#ifdef CONFIG_FLATMEM
-	free_area_init(zones_size);
-#else
-	pfn = min_low_pfn;
-	for (i = 0; i < MAX_NR_ZONES; i++)
-		for (j = 0; j < zones_size[i]; j++, pfn++)
-			if (!page_is_ram(pfn))
-				zholes_size[i]++;
-	free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size);
-#endif
+	free_area_init_nodes(max_zone_pfns);
 }
 
 static struct kcore_list kcore_mem, kcore_vmalloc;
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
index 6b293ce..90261b8 100644
--- a/arch/mips/pmc-sierra/Kconfig
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -5,12 +5,14 @@
 config PMC_MSP4200_EVAL
 	bool "PMC-Sierra MSP4200 Eval Board"
 	select CEVT_R4K
+	select CSRC_R4K
 	select IRQ_MSP_SLP
 	select HW_HAS_PCI
 
 config PMC_MSP4200_GW
 	bool "PMC-Sierra MSP4200 VoIP Gateway"
 	select CEVT_R4K
+	select CSRC_R4K
 	select IRQ_MSP_SLP
 	select HW_HAS_PCI
 
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index 26854fb..1617241 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -36,6 +36,7 @@
 #include <asm/sgi/ioc.h>
 #include <asm/sgi/mc.h>
 #include <asm/sgi/ip22.h>
+#include <asm/i8259.h>
 
 /* I2 has four EISA slots. */
 #define IP22_EISA_MAX_SLOTS	  4
@@ -93,126 +94,11 @@
 	return IRQ_NONE;
 }
 
-static void enable_eisa1_irq(unsigned int irq)
-{
-	u8 mask;
-
-	mask = inb(EISA_INT1_MASK);
-	mask &= ~((u8) (1 << irq));
-	outb(mask, EISA_INT1_MASK);
-}
-
-static unsigned int startup_eisa1_irq(unsigned int irq)
-{
-	u8 edge;
-
-	/* Only use edge interrupts for EISA */
-
-	edge = inb(EISA_INT1_EDGE_LEVEL);
-	edge &= ~((u8) (1 << irq));
-	outb(edge, EISA_INT1_EDGE_LEVEL);
-
-	enable_eisa1_irq(irq);
-	return 0;
-}
-
-static void disable_eisa1_irq(unsigned int irq)
-{
-	u8 mask;
-
-	mask = inb(EISA_INT1_MASK);
-	mask |= ((u8) (1 << irq));
-	outb(mask, EISA_INT1_MASK);
-}
-
-static void mask_and_ack_eisa1_irq(unsigned int irq)
-{
-	disable_eisa1_irq(irq);
-
-	outb(0x20, EISA_INT1_CTRL);
-}
-
-static void end_eisa1_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_eisa1_irq(irq);
-}
-
-static struct irq_chip ip22_eisa1_irq_type = {
-	.name		= "IP22 EISA",
-	.startup	= startup_eisa1_irq,
-	.ack		= mask_and_ack_eisa1_irq,
-	.mask		= disable_eisa1_irq,
-	.mask_ack	= mask_and_ack_eisa1_irq,
-	.unmask		= enable_eisa1_irq,
-	.end		= end_eisa1_irq,
-};
-
-static void enable_eisa2_irq(unsigned int irq)
-{
-	u8 mask;
-
-	mask = inb(EISA_INT2_MASK);
-	mask &= ~((u8) (1 << (irq - 8)));
-	outb(mask, EISA_INT2_MASK);
-}
-
-static unsigned int startup_eisa2_irq(unsigned int irq)
-{
-	u8 edge;
-
-	/* Only use edge interrupts for EISA */
-
-	edge = inb(EISA_INT2_EDGE_LEVEL);
-	edge &= ~((u8) (1 << (irq - 8)));
-	outb(edge, EISA_INT2_EDGE_LEVEL);
-
-	enable_eisa2_irq(irq);
-	return 0;
-}
-
-static void disable_eisa2_irq(unsigned int irq)
-{
-	u8 mask;
-
-	mask = inb(EISA_INT2_MASK);
-	mask |= ((u8) (1 << (irq - 8)));
-	outb(mask, EISA_INT2_MASK);
-}
-
-static void mask_and_ack_eisa2_irq(unsigned int irq)
-{
-	disable_eisa2_irq(irq);
-
-	outb(0x20, EISA_INT2_CTRL);
-}
-
-static void end_eisa2_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_eisa2_irq(irq);
-}
-
-static struct irq_chip ip22_eisa2_irq_type = {
-	.name		= "IP22 EISA",
-	.startup	= startup_eisa2_irq,
-	.ack		= mask_and_ack_eisa2_irq,
-	.mask		= disable_eisa2_irq,
-	.mask_ack	= mask_and_ack_eisa2_irq,
-	.unmask		= enable_eisa2_irq,
-	.end		= end_eisa2_irq,
-};
-
 static struct irqaction eisa_action = {
 	.handler	= ip22_eisa_intr,
 	.name		= "EISA",
 };
 
-static struct irqaction cascade_action = {
-	.handler	= no_action,
-	.name		= "EISA cascade",
-};
-
 int __init ip22_eisa_init(void)
 {
 	int i, c;
@@ -248,29 +134,13 @@
 	outb(1, EISA_EXT_NMI_RESET_CTRL);
 	udelay(50);	/* Wait long enough for the dust to settle */
 	outb(0, EISA_EXT_NMI_RESET_CTRL);
-	outb(0x11, EISA_INT1_CTRL);
-	outb(0x11, EISA_INT2_CTRL);
-	outb(0, EISA_INT1_MASK);
-	outb(8, EISA_INT2_MASK);
-	outb(4, EISA_INT1_MASK);
-	outb(2, EISA_INT2_MASK);
-	outb(1, EISA_INT1_MASK);
-	outb(1, EISA_INT2_MASK);
-	outb(0xfb, EISA_INT1_MASK);
-	outb(0xff, EISA_INT2_MASK);
 	outb(0, EISA_DMA2_WRITE_SINGLE);
 
-	for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) {
-		if (i < (SGINT_EISA + 8))
-			set_irq_chip(i, &ip22_eisa1_irq_type);
-		else
-			set_irq_chip(i, &ip22_eisa2_irq_type);
-	}
+	init_i8259_irqs();
 
 	/* Cannot use request_irq because of kmalloc not being ready at such
 	 * an early stage. Yes, I've been bitten... */
 	setup_irq(SGI_EISA_IRQ, &eisa_action);
-	setup_irq(SGINT_EISA + 2, &cascade_action);
 
 	EISA_bus = 1;
 	return 0;
diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index e19d60d..0177566 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -32,19 +32,19 @@
 	for (x=0; x<100000; x++) __asm__ __volatile__(""); })
 
 #define eeprom_cs_on(ptr) ({	\
-	*ptr &= ~EEPROM_DATO;	\
-	*ptr &= ~EEPROM_ECLK;	\
-	*ptr &= ~EEPROM_EPROT;	\
-	delay();		\
-	*ptr |= EEPROM_CSEL;	\
-	*ptr |= EEPROM_ECLK; })
+	__raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr);	\
+	__raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr);	\
+	__raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr);	\
+	delay();		                                \
+	__raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr);	\
+	__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
 
 #define eeprom_cs_off(ptr) ({	\
-	*ptr &= ~EEPROM_ECLK;	\
-	*ptr &= ~EEPROM_CSEL;	\
-	*ptr |= EEPROM_EPROT;	\
-	*ptr |= EEPROM_ECLK; })
+	__raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr);	\
+	__raw_writel(__raw_readl(ptr) & ~EEPROM_CSEL, ptr);	\
+	__raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr);	\
+	__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
 #define	BITS_IN_COMMAND	11
 /*
@@ -60,15 +60,17 @@
 	ser_cmd = cmd | (reg << (16 - BITS_IN_COMMAND));
 	for (i = 0; i < BITS_IN_COMMAND; i++) {
 		if (ser_cmd & (1<<15))	/* if high order bit set */
-			writel(readl(ctrl) | EEPROM_DATO, ctrl);
+			__raw_writel(__raw_readl(ctrl) | EEPROM_DATO, ctrl);
 		else
-			writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
-		writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
-		writel(readl(ctrl) | EEPROM_ECLK, ctrl);
+			__raw_writel(__raw_readl(ctrl) & ~EEPROM_DATO, ctrl);
+		__raw_writel(__raw_readl(ctrl) & ~EEPROM_ECLK, ctrl);
+		delay();
+		__raw_writel(__raw_readl(ctrl) | EEPROM_ECLK, ctrl);
+		delay();
 		ser_cmd <<= 1;
 	}
 	/* see data sheet timing diagram */
-	writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
+	__raw_writel(__raw_readl(ctrl) & ~EEPROM_DATO, ctrl);
 }
 
 unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg)
@@ -76,18 +78,18 @@
 	unsigned short res = 0;
 	int i;
 
-	writel(readl(ctrl) & ~EEPROM_EPROT, ctrl);
+	__raw_writel(__raw_readl(ctrl) & ~EEPROM_EPROT, ctrl);
 	eeprom_cs_on(ctrl);
 	eeprom_cmd(ctrl, EEPROM_READ, reg);
 
 	/* clock the data ouf of serial mem */
 	for (i = 0; i < 16; i++) {
-		writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
+		__raw_writel(__raw_readl(ctrl) & ~EEPROM_ECLK, ctrl);
 		delay();
-		writel(readl(ctrl) | EEPROM_ECLK, ctrl);
+		__raw_writel(__raw_readl(ctrl) | EEPROM_ECLK, ctrl);
 		delay();
 		res <<= 1;
-		if (readl(ctrl) & EEPROM_DATI)
+		if (__raw_readl(ctrl) & EEPROM_DATI)
 			res |= 1;
 	}
 
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index aab17dd..cab7cc2 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -209,18 +209,18 @@
 
 static void enable_macepci_irq(unsigned int irq)
 {
-	macepci_mask |= MACEPCI_CONTROL_INT(irq - 9);
+	macepci_mask |= MACEPCI_CONTROL_INT(irq - MACEPCI_SCSI0_IRQ);
 	mace->pci.control = macepci_mask;
-	crime_mask |= 1 << (irq - 1);
+	crime_mask |= 1 << (irq - CRIME_IRQ_BASE);
 	crime->imask = crime_mask;
 }
 
 static void disable_macepci_irq(unsigned int irq)
 {
-	crime_mask &= ~(1 << (irq - 1));
+	crime_mask &= ~(1 << (irq - CRIME_IRQ_BASE));
 	crime->imask = crime_mask;
 	flush_crime_bus();
-	macepci_mask &= ~MACEPCI_CONTROL_INT(irq - 9);
+	macepci_mask &= ~MACEPCI_CONTROL_INT(irq - MACEPCI_SCSI0_IRQ);
 	mace->pci.control = macepci_mask;
 	flush_mace_bus();
 }
@@ -299,7 +299,7 @@
 	pr_debug("crime_int %08x enabled\n", crime_int);
 	crime_mask |= crime_int;
 	crime->imask = crime_mask;
-	maceisa_mask |= 1 << (irq - 33);
+	maceisa_mask |= 1 << (irq - MACEISA_AUDIO_SW_IRQ);
 	mace->perif.ctrl.imask = maceisa_mask;
 }
 
@@ -307,7 +307,7 @@
 {
 	unsigned int crime_int = 0;
 
-	maceisa_mask &= ~(1 << (irq - 33));
+	maceisa_mask &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
         if (!(maceisa_mask & MACEISA_AUDIO_INT))
 		crime_int |= MACE_AUDIO_INT;
         if (!(maceisa_mask & MACEISA_MISC_INT))
@@ -331,7 +331,7 @@
 	case MACEISA_SERIAL2_TDMAPR_IRQ:
 		/* edge triggered */
 		mace_int = mace->perif.ctrl.istat;
-		mace_int &= ~(1 << (irq - 33));
+		mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
 		mace->perif.ctrl.istat = mace_int;
 		break;
 	}
@@ -359,13 +359,17 @@
 
 static void enable_mace_irq(unsigned int irq)
 {
-	crime_mask |= 1 << (irq - 1);
+	unsigned int bit = irq - CRIME_IRQ_BASE;
+
+	crime_mask |= (1 << bit);
 	crime->imask = crime_mask;
 }
 
 static void disable_mace_irq(unsigned int irq)
 {
-	crime_mask &= ~(1 << (irq - 1));
+	unsigned int bit = irq - CRIME_IRQ_BASE;
+
+	crime_mask &= ~(1 << bit);
 	crime->imask = crime_mask;
 	flush_crime_bus();
 }
@@ -489,7 +493,7 @@
 	mace->perif.ctrl.imask = 0;
 
 	mips_cpu_irq_init();
-	for (irq = MIPS_CPU_IRQ_BASE + 8; irq <= IP32_IRQ_MAX; irq++) {
+	for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) {
 		switch (irq) {
 		case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
 			set_irq_chip(irq, &ip32_mace_interrupt);
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index eeb089f..559acc0 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -6,6 +6,7 @@
 config CASIO_E55
 	bool "CASIO CASSIOPEIA E-10/15/55/65"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select ISA
@@ -15,6 +16,7 @@
 config IBM_WORKPAD
 	bool "IBM WorkPad z50"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select ISA
@@ -24,6 +26,7 @@
 config NEC_CMBVR4133
 	bool "NEC CMB-VR4133"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select HW_HAS_PCI
@@ -33,6 +36,7 @@
 config TANBAC_TB022X
 	bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select HW_HAS_PCI
@@ -48,6 +52,7 @@
 config VICTOR_MPC30X
 	bool "Victor MP-C303/304"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select HW_HAS_PCI
@@ -58,6 +63,7 @@
 config ZAO_CAPCELLA
 	bool "ZAO Networks Capcella"
 	select CEVT_R4K
+	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select HW_HAS_PCI
diff --git a/include/asm-mips/8253pit.h b/include/asm-mips/8253pit.h
deleted file mode 100644
index 285f784..0000000
--- a/include/asm-mips/8253pit.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * 8253/8254 Programmable Interval Timer
- */
-
-#ifndef _8253PIT_H
-#define _8253PIT_H
-
-#define PIT_TICK_RATE 	1193182UL
-
-#endif
diff --git a/include/asm-mips/dma.h b/include/asm-mips/dma.h
index 833437d..d6a6c21 100644
--- a/include/asm-mips/dma.h
+++ b/include/asm-mips/dma.h
@@ -92,6 +92,7 @@
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + 0x01000000)
 #endif
 #define MAX_DMA_PFN		PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS))
+#define MAX_DMA32_PFN		(1UL << (32 - PAGE_SHIFT))
 
 /* 8237 DMA controllers */
 #define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h
index 3e7e30d..17f082c 100644
--- a/include/asm-mips/futex.h
+++ b/include/asm-mips/futex.h
@@ -35,7 +35,7 @@
 		"	.set	mips0				\n"	\
 		"	.section .fixup,\"ax\"			\n"	\
 		"4:	li	%0, %6				\n"	\
-		"	j	2b				\n"	\
+		"	j	3b				\n"	\
 		"	.previous				\n"	\
 		"	.section __ex_table,\"a\"		\n"	\
 		"	"__UA_ADDR "\t1b, 4b			\n"	\
@@ -61,7 +61,7 @@
 		"	.set	mips0				\n"	\
 		"	.section .fixup,\"ax\"			\n"	\
 		"4:	li	%0, %6				\n"	\
-		"	j	2b				\n"	\
+		"	j	3b				\n"	\
 		"	.previous				\n"	\
 		"	.section __ex_table,\"a\"		\n"	\
 		"	"__UA_ADDR "\t1b, 4b			\n"	\
@@ -200,4 +200,4 @@
 }
 
 #endif
-#endif
+#endif /* _ASM_FUTEX_H */
diff --git a/include/asm-mips/i8253.h b/include/asm-mips/i8253.h
index 032ca73..5dabc87 100644
--- a/include/asm-mips/i8253.h
+++ b/include/asm-mips/i8253.h
@@ -12,6 +12,8 @@
 #define PIT_CH0			0x40
 #define PIT_CH2			0x42
 
+#define PIT_TICK_RATE		1193182UL
+
 extern spinlock_t i8253_lock;
 
 extern void setup_pit_timer(void);
diff --git a/include/asm-mips/ip32/ip32_ints.h b/include/asm-mips/ip32/ip32_ints.h
index ab5612f..85bc530 100644
--- a/include/asm-mips/ip32/ip32_ints.h
+++ b/include/asm-mips/ip32/ip32_ints.h
@@ -22,7 +22,7 @@
 	 * CPU interrupts are 0 ... 7
 	 */
 
-	CRIME_IRQ_BASE			= MIPS_CPU_IRQ_BASE,
+	CRIME_IRQ_BASE			= MIPS_CPU_IRQ_BASE + 8,
 
 	/*
 	 * MACE
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 90e4b40..1030562 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -68,11 +68,15 @@
 	if (cpu_has_dsp)						\
 		__save_dsp(prev);					\
 	(last) = resume(prev, next, task_thread_info(next));		\
+} while (0)
+
+#define finish_arch_switch(prev)					\
+do {									\
 	if (cpu_has_dsp)						\
 		__restore_dsp(current);					\
 	if (cpu_has_userlocal)						\
-		write_c0_userlocal(task_thread_info(current)->tp_value);\
-} while(0)
+		write_c0_userlocal(current_thread_info()->tp_value);	\
+} while (0)
 
 static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 {
diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h
index ee1663e..7717934 100644
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -58,10 +58,22 @@
  * Initialize the calling CPU's compare interrupt as clockevent device
  */
 #ifdef CONFIG_CEVT_R4K
-extern void mips_clockevent_init(void);
+extern int mips_clockevent_init(void);
 extern unsigned int __weak get_c0_compare_int(void);
 #else
-static inline void mips_clockevent_init(void)
+static inline int mips_clockevent_init(void)
+{
+	return -ENXIO;
+}
+#endif
+
+/*
+ * Initialize the count register as a clocksource
+ */
+#ifdef CONFIG_CEVT_R4K
+extern void init_mips_clocksource(void);
+#else
+static inline void init_mips_clocksource(void)
 {
 }
 #endif