ARM: orion5x: Refactor mpp code to use common orion platform mpp.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 90ab022..855e0e7 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -385,76 +385,76 @@
/****************************************************************************
* General Setup
*/
-static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = {
- { 0, MPP_PCIE_RST_OUTn },
- { 1, MPP_GPIO }, /* right amber LED (sata ch0) */
- { 2, MPP_GPIO }, /* left amber LED (sata ch1) */
- { 3, MPP_UNUSED },
- { 4, MPP_GPIO }, /* power button LED */
- { 5, MPP_GPIO }, /* power button LED */
- { 6, MPP_GPIO }, /* GMT G751-2f overtemp */
- { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */
- { 8, MPP_GPIO }, /* triggers power off */
- { 9, MPP_GPIO }, /* power button switch */
- { 10, MPP_GPIO }, /* reset button switch */
- { 11, MPP_UNUSED },
- { 12, MPP_UNUSED },
- { 13, MPP_UNUSED },
- { 14, MPP_UNUSED },
- { 15, MPP_UNUSED },
- { 16, MPP_UNUSED },
- { 17, MPP_UNUSED },
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int dns323a_mpp_modes[] __initdata = {
+ MPP0_PCIE_RST_OUTn,
+ MPP1_GPIO, /* right amber LED (sata ch0) */
+ MPP2_GPIO, /* left amber LED (sata ch1) */
+ MPP3_UNUSED,
+ MPP4_GPIO, /* power button LED */
+ MPP5_GPIO, /* power button LED */
+ MPP6_GPIO, /* GMT G751-2f overtemp */
+ MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */
+ MPP8_GPIO, /* triggers power off */
+ MPP9_GPIO, /* power button switch */
+ MPP10_GPIO, /* reset button switch */
+ MPP11_UNUSED,
+ MPP12_UNUSED,
+ MPP13_UNUSED,
+ MPP14_UNUSED,
+ MPP15_UNUSED,
+ MPP16_UNUSED,
+ MPP17_UNUSED,
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
-static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = {
- { 0, MPP_UNUSED },
- { 1, MPP_GPIO }, /* right amber LED (sata ch0) */
- { 2, MPP_GPIO }, /* left amber LED (sata ch1) */
- { 3, MPP_GPIO }, /* system up flag */
- { 4, MPP_GPIO }, /* power button LED */
- { 5, MPP_GPIO }, /* power button LED */
- { 6, MPP_GPIO }, /* GMT G751-2f overtemp */
- { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */
- { 8, MPP_GPIO }, /* triggers power off */
- { 9, MPP_GPIO }, /* power button switch */
- { 10, MPP_GPIO }, /* reset button switch */
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED },
- { 13, MPP_SATA_LED },
- { 14, MPP_SATA_LED },
- { 15, MPP_SATA_LED },
- { 16, MPP_UNUSED },
- { 17, MPP_UNUSED },
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int dns323b_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_GPIO, /* right amber LED (sata ch0) */
+ MPP2_GPIO, /* left amber LED (sata ch1) */
+ MPP3_GPIO, /* system up flag */
+ MPP4_GPIO, /* power button LED */
+ MPP5_GPIO, /* power button LED */
+ MPP6_GPIO, /* GMT G751-2f overtemp */
+ MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */
+ MPP8_GPIO, /* triggers power off */
+ MPP9_GPIO, /* power button switch */
+ MPP10_GPIO, /* reset button switch */
+ MPP11_UNUSED,
+ MPP12_SATA_LED,
+ MPP13_SATA_LED,
+ MPP14_SATA_LED,
+ MPP15_SATA_LED,
+ MPP16_UNUSED,
+ MPP17_UNUSED,
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
-static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* ? input */
- { 1, MPP_GPIO }, /* input power switch (0 = pressed) */
- { 2, MPP_GPIO }, /* output power off */
- { 3, MPP_UNUSED }, /* ? output */
- { 4, MPP_UNUSED }, /* ? output */
- { 5, MPP_UNUSED }, /* ? output */
- { 6, MPP_UNUSED }, /* ? output */
- { 7, MPP_UNUSED }, /* ? output */
- { 8, MPP_GPIO }, /* i/o right amber LED */
- { 9, MPP_GPIO }, /* i/o left amber LED */
- { 10, MPP_GPIO }, /* input */
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED },
- { 13, MPP_SATA_LED },
- { 14, MPP_SATA_LED },
- { 15, MPP_SATA_LED },
- { 16, MPP_UNUSED },
- { 17, MPP_GPIO }, /* power button LED */
- { 18, MPP_GPIO }, /* fan speed bit 0 */
- { 19, MPP_GPIO }, /* fan speed bit 1 */
- { -1 },
+static unsigned int dns323c_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* ? input */
+ MPP1_GPIO, /* input power switch (0 = pressed) */
+ MPP2_GPIO, /* output power off */
+ MPP3_UNUSED, /* ? output */
+ MPP4_UNUSED, /* ? output */
+ MPP5_UNUSED, /* ? output */
+ MPP6_UNUSED, /* ? output */
+ MPP7_UNUSED, /* ? output */
+ MPP8_GPIO, /* i/o right amber LED */
+ MPP9_GPIO, /* i/o left amber LED */
+ MPP10_GPIO, /* input */
+ MPP11_UNUSED,
+ MPP12_SATA_LED,
+ MPP13_SATA_LED,
+ MPP14_SATA_LED,
+ MPP15_SATA_LED,
+ MPP16_UNUSED,
+ MPP17_GPIO, /* power button LED */
+ MPP18_GPIO, /* fan speed bit 0 */
+ MPP19_GPIO, /* fan speed bit 1 */
+ 0,
};
/* Rev C1 Fan speed notes: