Merge branch 'pm-upstream/debug' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into for-next
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 7e9b76c..31d9f56 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -473,6 +473,11 @@
#endif
+static void enable_board_wakeup_source(void)
+{
+ omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
@@ -490,6 +495,7 @@
omap_serial_init();
usb_musb_init();
board_smc91x_init();
+ enable_board_wakeup_source();
}
static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index f546063..1f13e2a 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -96,7 +96,7 @@
static struct platform_device zoom2_debugboard_serial_device = {
.name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
+ .id = 3,
.dev = {
.platform_data = serial_platform_data,
},
@@ -129,6 +129,7 @@
static inline int omap_zoom2_debugboard_detect(void)
{
int debug_board_detect = 0;
+ int ret = 1;
debug_board_detect = ZOOM2_SMSC911X_GPIO;
@@ -140,10 +141,10 @@
gpio_direction_input(debug_board_detect);
if (!gpio_get_value(debug_board_detect)) {
- gpio_free(debug_board_detect);
- return 0;
+ ret = 0;
}
- return 1;
+ gpio_free(debug_board_detect);
+ return ret;
}
static struct platform_device *zoom2_devices[] __initdata = {
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f63f3a2..2daa595 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -542,6 +542,11 @@
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* SYS_NIRQ T2 INT1 */
+MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
+ OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
+ OMAP34XX_MUX_MODE0)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 26f2aca..0ff5a6c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -695,7 +695,7 @@
if (!pwrdm->pwrsts)
return 0;
- pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+ pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
pwrst->pwrdm = pwrdm;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index dd3c735..0f50810 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -113,6 +113,21 @@
}
};
+#ifdef CONFIG_ARCH_OMAP4
+static struct plat_serial8250_port serial_platform_data3[] = {
+ {
+ .membase = IO_ADDRESS(OMAP_UART4_BASE),
+ .mapbase = OMAP_UART4_BASE,
+ .irq = 70,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
+ }, {
+ .flags = 0
+ }
+};
+#endif
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
@@ -550,6 +565,17 @@
},
},
},
+#ifdef CONFIG_ARCH_OMAP4
+ {
+ .pdev = {
+ .name = "serial8250",
+ .id = 3
+ .dev = {
+ .platform_data = serial_platform_data3,
+ },
+ },
+ },
+#endif
};
void __init omap_serial_init(void)
@@ -583,8 +609,11 @@
uart->fck = NULL;
}
- if (!uart->ick || !uart->fck)
- continue;
+ /* FIXME: Remove this once the clkdev is ready */
+ if (!cpu_is_omap44xx()) {
+ if (!uart->ick || !uart->fck)
+ continue;
+ }
uart->num = i;
p->private_data = uart;
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 739e59e..1145a25 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -31,15 +31,6 @@
#include <mach/mux.h>
#include <mach/usb.h>
-#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404)
-
-static void __init usb_musb_pm_init(void)
-{
- /* Ensure force-idle mode for OTG controller */
- if (cpu_is_omap34xx())
- omap_writel(0, OTG_SYSCONFIG);
-}
-
#ifdef CONFIG_USB_MUSB_SOC
static struct resource musb_resources[] = {
@@ -173,13 +164,10 @@
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
}
-
- usb_musb_pm_init();
}
#else
void __init usb_musb_init(void)
{
- usb_musb_pm_init();
}
#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 2c57bad..98dfab6 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -885,6 +885,9 @@
AH9_3430_MMC3_DAT1,
AF13_3430_MMC3_DAT2,
AF13_3430_MMC3_DAT3,
+
+ /* SYS_NIRQ T2 INT1 */
+ AF26_34XX_SYS_NIRQ,
};
struct omap_mux_cfg {