vmscan: second chance replacement for anonymous pages
We avoid evicting and scanning anonymous pages for the most part, but
under some workloads we can end up with most of memory filled with
anonymous pages. At that point, we suddenly need to clear the referenced
bits on all of memory, which can take ages on very large memory systems.
We can reduce the maximum number of pages that need to be scanned by not
taking the referenced state into account when deactivating an anonymous
page. After all, every anonymous page starts out referenced, so why
check?
If an anonymous page gets referenced again before it reaches the end of
the inactive list, we move it back to the active list.
To keep the maximum amount of necessary work reasonable, we scale the
active to inactive ratio with the size of memory, using the formula
active:inactive ratio = sqrt(memory in GB * 10).
Kswapd CPU use now seems to scale by the amount of pageout bandwidth,
instead of by the amount of memory present in the system.
[kamezawa.hiroyu@jp.fujitsu.com: fix OOM with memcg]
[kamezawa.hiroyu@jp.fujitsu.com: memcg: lru scan fix]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 740a16a..79c0981 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4263,6 +4263,46 @@
calculate_totalreserve_pages();
}
+/**
+ * setup_per_zone_inactive_ratio - called when min_free_kbytes changes.
+ *
+ * The inactive anon list should be small enough that the VM never has to
+ * do too much work, but large enough that each inactive page has a chance
+ * to be referenced again before it is swapped out.
+ *
+ * The inactive_anon ratio is the target ratio of ACTIVE_ANON to
+ * INACTIVE_ANON pages on this zone's LRU, maintained by the
+ * pageout code. A zone->inactive_ratio of 3 means 3:1 or 25% of
+ * the anonymous pages are kept on the inactive list.
+ *
+ * total target max
+ * memory ratio inactive anon
+ * -------------------------------------
+ * 10MB 1 5MB
+ * 100MB 1 50MB
+ * 1GB 3 250MB
+ * 10GB 10 0.9GB
+ * 100GB 31 3GB
+ * 1TB 101 10GB
+ * 10TB 320 32GB
+ */
+void setup_per_zone_inactive_ratio(void)
+{
+ struct zone *zone;
+
+ for_each_zone(zone) {
+ unsigned int gb, ratio;
+
+ /* Zone size in gigabytes */
+ gb = zone->present_pages >> (30 - PAGE_SHIFT);
+ ratio = int_sqrt(10 * gb);
+ if (!ratio)
+ ratio = 1;
+
+ zone->inactive_ratio = ratio;
+ }
+}
+
/*
* Initialise min_free_kbytes.
*
@@ -4300,6 +4340,7 @@
min_free_kbytes = 65536;
setup_per_zone_pages_min();
setup_per_zone_lowmem_reserve();
+ setup_per_zone_inactive_ratio();
return 0;
}
module_init(init_per_zone_pages_min)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index d10d2f9..c82ee9a 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1090,6 +1090,7 @@
__mod_zone_page_state(zone, NR_ACTIVE_ANON, -pgmoved);
spin_unlock_irq(&zone->lru_lock);
+ pgmoved = 0;
while (!list_empty(&l_hold)) {
cond_resched();
page = lru_to_page(&l_hold);
@@ -1098,6 +1099,13 @@
}
/*
+ * Count the referenced pages as rotated, even when they are moved
+ * to the inactive list. This helps balance scan pressure between
+ * file and anonymous pages in get_scan_ratio.
+ */
+ zone->recent_rotated[!!file] += pgmoved;
+
+ /*
* Now put the pages back on the appropriate [file or anon] inactive
* and active lists.
*/
@@ -1158,7 +1166,6 @@
}
}
__mod_zone_page_state(zone, NR_LRU_BASE + lru, pgmoved);
- zone->recent_rotated[!!file] += pgmoved;
__count_zone_vm_events(PGREFILL, zone, pgscanned);
__count_vm_events(PGDEACTIVATE, pgdeactivate);
@@ -1174,7 +1181,13 @@
{
int file = is_file_lru(lru);
- if (lru == LRU_ACTIVE_ANON || lru == LRU_ACTIVE_FILE) {
+ if (lru == LRU_ACTIVE_FILE) {
+ shrink_active_list(nr_to_scan, zone, sc, priority, file);
+ return 0;
+ }
+
+ if (lru == LRU_ACTIVE_ANON &&
+ (!scan_global_lru(sc) || inactive_anon_is_low(zone))) {
shrink_active_list(nr_to_scan, zone, sc, priority, file);
return 0;
}
@@ -1310,8 +1323,8 @@
}
}
- while (nr[LRU_ACTIVE_ANON] || nr[LRU_INACTIVE_ANON] ||
- nr[LRU_ACTIVE_FILE] || nr[LRU_INACTIVE_FILE]) {
+ while (nr[LRU_INACTIVE_ANON] || nr[LRU_ACTIVE_FILE] ||
+ nr[LRU_INACTIVE_FILE]) {
for_each_lru(l) {
if (nr[l]) {
nr_to_scan = min(nr[l],
@@ -1324,6 +1337,15 @@
}
}
+ /*
+ * Even if we did not try to evict anon pages at all, we want to
+ * rebalance the anon lru active/inactive ratio.
+ */
+ if (!scan_global_lru(sc) || inactive_anon_is_low(zone))
+ shrink_active_list(SWAP_CLUSTER_MAX, zone, sc, priority, 0);
+ else if (!scan_global_lru(sc))
+ shrink_active_list(SWAP_CLUSTER_MAX, zone, sc, priority, 0);
+
throttle_vm_writeout(sc->gfp_mask);
return nr_reclaimed;
}
@@ -1617,6 +1639,14 @@
priority != DEF_PRIORITY)
continue;
+ /*
+ * Do some background aging of the anon list, to give
+ * pages a chance to be referenced before reclaiming.
+ */
+ if (inactive_anon_is_low(zone))
+ shrink_active_list(SWAP_CLUSTER_MAX, zone,
+ &sc, priority, 0);
+
if (!zone_watermark_ok(zone, order, zone->pages_high,
0, 0)) {
end_zone = i;
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 27400b7..4380b0d 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -738,10 +738,12 @@
seq_printf(m,
"\n all_unreclaimable: %u"
"\n prev_priority: %i"
- "\n start_pfn: %lu",
+ "\n start_pfn: %lu"
+ "\n inactive_ratio: %u",
zone_is_all_unreclaimable(zone),
zone->prev_priority,
- zone->zone_start_pfn);
+ zone->zone_start_pfn,
+ zone->inactive_ratio);
seq_putc(m, '\n');
}