Update Chelsio gige net driver.
- Use extern prefix for functions required.
- Removed a lot of wrappers, including t1_read/write_reg_4.
- Removed various macros, using native kernel calls now.
- Enumerated various #defines.
- Removed a lot of shared code which is not currently used in "NIC only" mode.
- Removed dead code.
Documentation/networking/cxgb.txt:
- Updated release notes for version 2.1.1
drivers/net/chelsio/ch_ethtool.h
- removed file, no longer using ETHTOOL namespace.
drivers/net/chelsio/common.h
- moved code from osdep.h to common.h
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/cphy.h
- removed dead code.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/cxgb2.c
- use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h.
- removed unused code.
- use printk message for link info resembling drivers/net/mii.c.
- no longer using the MODULE_xxx namespace.
- no longer using "pci_" namespace.
- no longer using ETHTOOL namespace.
drivers/net/chelsio/cxgb2.h
- removed file, merged into common.h
drivers/net/chelsio/elmer0.h
- removed dead code.
- added various enums.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/espi.c
- removed various macros, using native kernel calls now.
- removed a lot of wrappers, including t1_read/write_reg_4.
drivers/net/chelsio/espi.h
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/gmac.h
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/mv88x201x.c
- changes to sync with Chelsio TOT.
drivers/net/chelsio/osdep.h
- removed file, consolidation. osdep was used to translate wrapper functions
since our code supports multiple OSs. removed wrappers.
drivers/net/chelsio/pm3393.c
- removed various macros, using native kernel calls now.
- removed a lot of wrappers, including t1_read/write_reg_4.
- removed unused code.
drivers/net/chelsio/regs.h
- added a few register entries for future and current feature support.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/sge.c
- rewrote large portion of scatter-gather engine to stabilize
performance.
- using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler
types.
drivers/net/chelsio/sge.h
- rewrote large portion of scatter-gather engine to stabilize
performance.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/subr.c
- merged tp.c into subr.c
- removed various macros, using native kernel calls now.
- removed a lot of wrappers, including t1_read/write_reg_4.
- removed unused code.
drivers/net/chelsio/suni1x10gexp_regs.h
- modified copyright and authorship of file.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/tp.c
- removed file, merged into subr.c.
drivers/net/chelsio/tp.h
- removed file.
include/linux/pci_ids.h
- patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from
our code.
diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile
index ff8c11b..91e9278 100644
--- a/drivers/net/chelsio/Makefile
+++ b/drivers/net/chelsio/Makefile
@@ -7,6 +7,5 @@
EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS)
-cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o mv88x201x.o
-
+cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o
diff --git a/drivers/net/chelsio/ch_ethtool.h b/drivers/net/chelsio/ch_ethtool.h
deleted file mode 100644
index c523d24..0000000
--- a/drivers/net/chelsio/ch_ethtool.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*****************************************************************************
- * *
- * File: ch_ethtool.h *
- * $Revision: 1.5 $ *
- * $Date: 2005/03/23 07:15:58 $ *
- * Description: *
- * part of the Chelsio 10Gb Ethernet Driver. *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License, version 2, as *
- * published by the Free Software Foundation. *
- * *
- * You should have received a copy of the GNU General Public License along *
- * with this program; if not, write to the Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
- * *
- * http://www.chelsio.com *
- * *
- * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
- * All rights reserved. *
- * *
- * Maintainers: maintainers@chelsio.com *
- * *
- * Authors: Dimitrios Michailidis <dm@chelsio.com> *
- * Tina Yang <tainay@chelsio.com> *
- * Felix Marti <felix@chelsio.com> *
- * Scott Bardone <sbardone@chelsio.com> *
- * Kurt Ottaway <kottaway@chelsio.com> *
- * Frank DiMambro <frank@chelsio.com> *
- * *
- * History: *
- * *
- ****************************************************************************/
-
-#ifndef __CHETHTOOL_LINUX_H__
-#define __CHETHTOOL_LINUX_H__
-
-/* TCB size in 32-bit words */
-#define TCB_WORDS (TCB_SIZE / 4)
-
-enum {
- ETHTOOL_SETREG,
- ETHTOOL_GETREG,
- ETHTOOL_SETTPI,
- ETHTOOL_GETTPI,
- ETHTOOL_DEVUP,
- ETHTOOL_GETMTUTAB,
- ETHTOOL_SETMTUTAB,
- ETHTOOL_GETMTU,
- ETHTOOL_SET_PM,
- ETHTOOL_GET_PM,
- ETHTOOL_GET_TCAM,
- ETHTOOL_SET_TCAM,
- ETHTOOL_GET_TCB,
- ETHTOOL_READ_TCAM_WORD,
-};
-
-struct ethtool_reg {
- uint32_t cmd;
- uint32_t addr;
- uint32_t val;
-};
-
-struct ethtool_mtus {
- uint32_t cmd;
- uint16_t mtus[NMTUS];
-};
-
-struct ethtool_pm {
- uint32_t cmd;
- uint32_t tx_pg_sz;
- uint32_t tx_num_pg;
- uint32_t rx_pg_sz;
- uint32_t rx_num_pg;
- uint32_t pm_total;
-};
-
-struct ethtool_tcam {
- uint32_t cmd;
- uint32_t tcam_size;
- uint32_t nservers;
- uint32_t nroutes;
-};
-
-struct ethtool_tcb {
- uint32_t cmd;
- uint32_t tcb_index;
- uint32_t tcb_data[TCB_WORDS];
-};
-
-struct ethtool_tcam_word {
- uint32_t cmd;
- uint32_t addr;
- uint32_t buf[3];
-};
-
-#define SIOCCHETHTOOL SIOCDEVPRIVATE
-#endif
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index 017684f..f093488 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: common.h *
- * $Revision: 1.5 $ *
- * $Date: 2005/03/23 07:41:27 $ *
+ * $Revision: 1.21 $ *
+ * $Date: 2005/06/22 00:43:25 $ *
* Description: *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
@@ -36,74 +36,101 @@
* *
****************************************************************************/
-#ifndef CHELSIO_COMMON_H
-#define CHELSIO_COMMON_H
+#ifndef _CXGB_COMMON_H_
+#define _CXGB_COMMON_H_
-#define DIMOF(x) (sizeof(x)/sizeof(x[0]))
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/pci_ids.h>
-#define NMTUS 8
-#define MAX_NPORTS 4
-#define TCB_SIZE 128
+#define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver"
+#define DRV_NAME "cxgb"
+#define DRV_VERSION "2.1.1"
+#define PFX DRV_NAME ": "
+
+#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__)
+#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__)
+#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__)
+
+#define CH_DEVICE(devid, ssid, idx) \
+ { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
+
+#define SUPPORTED_PAUSE (1 << 13)
+#define SUPPORTED_LOOPBACK (1 << 15)
+
+#define ADVERTISED_PAUSE (1 << 13)
+#define ADVERTISED_ASYM_PAUSE (1 << 14)
+
+typedef struct adapter adapter_t;
+
+void t1_elmer0_ext_intr(adapter_t *adapter);
+void t1_link_changed(adapter_t *adapter, int port_id, int link_status,
+ int speed, int duplex, int fc);
+
+struct t1_rx_mode {
+ struct net_device *dev;
+ u32 idx;
+ struct dev_mc_list *list;
+};
+
+#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC)
+#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI)
+#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count)
+
+static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
+{
+ u8 *addr = 0;
+
+ if (rm->idx++ < rm->dev->mc_count) {
+ addr = rm->list->dmi_addr;
+ rm->list = rm->list->next;
+ }
+ return addr;
+}
+
+#define MAX_NPORTS 4
+
+#define SPEED_INVALID 0xffff
+#define DUPLEX_INVALID 0xff
enum {
- CHBT_BOARD_7500,
- CHBT_BOARD_8000,
- CHBT_BOARD_CHT101,
- CHBT_BOARD_CHT110,
- CHBT_BOARD_CHT210,
- CHBT_BOARD_CHT204,
CHBT_BOARD_N110,
- CHBT_BOARD_N210,
- CHBT_BOARD_COUGAR,
- CHBT_BOARD_6800,
- CHBT_BOARD_SIMUL
+ CHBT_BOARD_N210
};
enum {
- CHBT_TERM_FPGA,
CHBT_TERM_T1,
- CHBT_TERM_T2,
- CHBT_TERM_T3
+ CHBT_TERM_T2
};
enum {
- CHBT_MAC_CHELSIO_A,
- CHBT_MAC_IXF1010,
CHBT_MAC_PM3393,
- CHBT_MAC_VSC7321,
- CHBT_MAC_DUMMY
};
enum {
- CHBT_PHY_88E1041,
- CHBT_PHY_88E1111,
CHBT_PHY_88X2010,
- CHBT_PHY_XPAK,
- CHBT_PHY_MY3126,
- CHBT_PHY_DUMMY
};
enum {
- PAUSE_RX = 1,
- PAUSE_TX = 2,
- PAUSE_AUTONEG = 4
+ PAUSE_RX = 1 << 0,
+ PAUSE_TX = 1 << 1,
+ PAUSE_AUTONEG = 1 << 2
};
/* Revisions of T1 chip */
-#define TERM_T1A 0
-#define TERM_T1B 1
-#define TERM_T2 3
-
-struct tp_params {
- unsigned int pm_size;
- unsigned int cm_size;
- unsigned int pm_rx_base;
- unsigned int pm_tx_base;
- unsigned int pm_rx_pg_size;
- unsigned int pm_tx_pg_size;
- unsigned int pm_rx_num_pgs;
- unsigned int pm_tx_num_pgs;
- unsigned int use_5tuple_mode;
+enum {
+ TERM_T1A = 0,
+ TERM_T1B = 1,
+ TERM_T2 = 3
};
struct sge_params {
@@ -118,17 +145,7 @@
unsigned int polling;
};
-struct mc5_params {
- unsigned int mode; /* selects MC5 width */
- unsigned int nservers; /* size of server region */
- unsigned int nroutes; /* size of routing region */
-};
-
-/* Default MC5 region sizes */
-#define DEFAULT_SERVER_REGION_LEN 256
-#define DEFAULT_RT_REGION_LEN 1024
-
-struct pci_params {
+struct chelsio_pci_params {
unsigned short speed;
unsigned char width;
unsigned char is_pcix;
@@ -136,31 +153,14 @@
struct adapter_params {
struct sge_params sge;
- struct mc5_params mc5;
- struct tp_params tp;
- struct pci_params pci;
+ struct chelsio_pci_params pci;
const struct board_info *brd_info;
- unsigned short mtus[NMTUS];
- unsigned int nports; /* # of ethernet ports */
+ unsigned int nports; /* # of ethernet ports */
unsigned int stats_update_period;
unsigned short chip_revision;
unsigned char chip_version;
- unsigned char is_asic;
-};
-
-struct pci_err_cnt {
- unsigned int master_parity_err;
- unsigned int sig_target_abort;
- unsigned int rcv_target_abort;
- unsigned int rcv_master_abort;
- unsigned int sig_sys_err;
- unsigned int det_parity_err;
- unsigned int pio_parity_err;
- unsigned int wf_parity_err;
- unsigned int rf_parity_err;
- unsigned int cf_parity_err;
};
struct link_config {
@@ -175,8 +175,60 @@
unsigned char autoneg; /* autonegotiating? */
};
-#define SPEED_INVALID 0xffff
-#define DUPLEX_INVALID 0xff
+struct cmac;
+struct cphy;
+
+struct port_info {
+ struct net_device *dev;
+ struct cmac *mac;
+ struct cphy *phy;
+ struct link_config link_config;
+ struct net_device_stats netstats;
+};
+
+struct sge;
+struct peespi;
+
+struct adapter {
+ u8 *regs;
+ struct pci_dev *pdev;
+ unsigned long registered_device_map;
+ unsigned long open_device_map;
+ unsigned long flags;
+
+ const char *name;
+ int msg_enable;
+ u32 mmio_len;
+
+ struct work_struct ext_intr_handler_task;
+ struct adapter_params params;
+
+ struct vlan_group *vlan_grp;
+
+ /* Terminator modules. */
+ struct sge *sge;
+ struct peespi *espi;
+
+ struct port_info port[MAX_NPORTS];
+ struct work_struct stats_update_task;
+ struct timer_list stats_update_timer;
+
+ struct semaphore mib_mutex;
+ spinlock_t tpi_lock;
+ spinlock_t work_lock;
+ /* guards async operations */
+ spinlock_t async_lock ____cacheline_aligned;
+ u32 slow_intr_mask;
+};
+
+enum { /* adapter flags */
+ FULL_INIT_DONE = 1 << 0,
+ TSO_CAPABLE = 1 << 2,
+ TCP_CSUM_CAPABLE = 1 << 3,
+ UDP_CSUM_CAPABLE = 1 << 4,
+ VLAN_ACCEL_CAPABLE = 1 << 5,
+ RX_CSUM_ENABLED = 1 << 6,
+};
struct mdio_ops;
struct gmac;
@@ -205,19 +257,8 @@
const char *desc;
};
-#include "osdep.h"
-
-#ifndef PCI_VENDOR_ID_CHELSIO
-#define PCI_VENDOR_ID_CHELSIO 0x1425
-#endif
-
extern struct pci_device_id t1_pci_tbl[];
-static inline int t1_is_asic(const adapter_t *adapter)
-{
- return adapter->params.is_asic;
-}
-
static inline int adapter_matches_type(const adapter_t *adapter,
int version, int revision)
{
@@ -245,25 +286,29 @@
return board_info(adap)->clock_core / 1000000;
}
-int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value);
-int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value);
+extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value);
+extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value);
-void t1_interrupts_enable(adapter_t *adapter);
-void t1_interrupts_disable(adapter_t *adapter);
-void t1_interrupts_clear(adapter_t *adapter);
-int elmer0_ext_intr_handler(adapter_t *adapter);
-int t1_slow_intr_handler(adapter_t *adapter);
+extern void t1_interrupts_enable(adapter_t *adapter);
+extern void t1_interrupts_disable(adapter_t *adapter);
+extern void t1_interrupts_clear(adapter_t *adapter);
+extern int elmer0_ext_intr_handler(adapter_t *adapter);
+extern int t1_slow_intr_handler(adapter_t *adapter);
-int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc);
-const struct board_info *t1_get_board_info(unsigned int board_id);
-const struct board_info *t1_get_board_info_from_ids(unsigned int devid,
+extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc);
+extern const struct board_info *t1_get_board_info(unsigned int board_id);
+extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid,
unsigned short ssid);
-int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data);
-int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
+extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data);
+extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
struct adapter_params *p);
-int t1_init_hw_modules(adapter_t *adapter);
-int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi);
-void t1_free_sw_modules(adapter_t *adapter);
-void t1_fatal_err(adapter_t *adapter);
-#endif
+extern int t1_init_hw_modules(adapter_t *adapter);
+extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi);
+extern void t1_free_sw_modules(adapter_t *adapter);
+extern void t1_fatal_err(adapter_t *adapter);
+extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable);
+extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable);
+extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable);
+
+#endif /* _CXGB_COMMON_H_ */
diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h
index 1bc2248..3412342 100644
--- a/drivers/net/chelsio/cphy.h
+++ b/drivers/net/chelsio/cphy.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: cphy.h *
- * $Revision: 1.4 $ *
- * $Date: 2005/03/23 07:41:27 $ *
+ * $Revision: 1.7 $ *
+ * $Date: 2005/06/21 18:29:47 $ *
* Description: *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
@@ -36,8 +36,8 @@
* *
****************************************************************************/
-#ifndef CHELSIO_CPHY_H
-#define CHELSIO_CPHY_H
+#ifndef _CXGB_CPHY_H_
+#define _CXGB_CPHY_H_
#include "common.h"
@@ -142,9 +142,7 @@
int (*reset)(adapter_t *adapter);
};
-extern struct gphy t1_my3126_ops;
-extern struct gphy t1_mv88e1xxx_ops;
-extern struct gphy t1_xpak_ops;
extern struct gphy t1_mv88x201x_ops;
extern struct gphy t1_dummy_phy_ops;
-#endif
+
+#endif /* _CXGB_CPHY_H_ */
diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h
index 45e9248..27925e4 100644
--- a/drivers/net/chelsio/cpl5_cmd.h
+++ b/drivers/net/chelsio/cpl5_cmd.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: cpl5_cmd.h *
- * $Revision: 1.4 $ *
- * $Date: 2005/03/23 07:15:58 $ *
+ * $Revision: 1.6 $ *
+ * $Date: 2005/06/21 18:29:47 $ *
* Description: *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
@@ -36,8 +36,8 @@
* *
****************************************************************************/
-#ifndef _CPL5_CMD_H
-#define _CPL5_CMD_H
+#ifndef _CXGB_CPL5_CMD_H_
+#define _CXGB_CPL5_CMD_H_
#include <asm/byteorder.h>
@@ -59,12 +59,12 @@
};
struct cpl_rx_data {
- __u32 rsvd0;
- __u32 len;
- __u32 seq;
- __u16 urg;
- __u8 rsvd1;
- __u8 status;
+ u32 rsvd0;
+ u32 len;
+ u32 seq;
+ u16 urg;
+ u8 rsvd1;
+ u8 status;
};
/*
@@ -73,73 +73,73 @@
* used so we break it into 2 16-bit parts to easily meet our alignment needs.
*/
struct cpl_tx_pkt {
- __u8 opcode;
+ u8 opcode;
#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 iff:4;
- __u8 ip_csum_dis:1;
- __u8 l4_csum_dis:1;
- __u8 vlan_valid:1;
- __u8 rsvd:1;
+ u8 iff:4;
+ u8 ip_csum_dis:1;
+ u8 l4_csum_dis:1;
+ u8 vlan_valid:1;
+ u8 rsvd:1;
#else
- __u8 rsvd:1;
- __u8 vlan_valid:1;
- __u8 l4_csum_dis:1;
- __u8 ip_csum_dis:1;
- __u8 iff:4;
+ u8 rsvd:1;
+ u8 vlan_valid:1;
+ u8 l4_csum_dis:1;
+ u8 ip_csum_dis:1;
+ u8 iff:4;
#endif
- __u16 vlan;
- __u16 len_hi;
- __u16 len_lo;
+ u16 vlan;
+ u16 len_hi;
+ u16 len_lo;
};
struct cpl_tx_pkt_lso {
- __u8 opcode;
+ u8 opcode;
#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 iff:4;
- __u8 ip_csum_dis:1;
- __u8 l4_csum_dis:1;
- __u8 vlan_valid:1;
- __u8 rsvd:1;
+ u8 iff:4;
+ u8 ip_csum_dis:1;
+ u8 l4_csum_dis:1;
+ u8 vlan_valid:1;
+ u8 rsvd:1;
#else
- __u8 rsvd:1;
- __u8 vlan_valid:1;
- __u8 l4_csum_dis:1;
- __u8 ip_csum_dis:1;
- __u8 iff:4;
+ u8 rsvd:1;
+ u8 vlan_valid:1;
+ u8 l4_csum_dis:1;
+ u8 ip_csum_dis:1;
+ u8 iff:4;
#endif
- __u16 vlan;
- __u32 len;
+ u16 vlan;
+ u32 len;
- __u32 rsvd2;
- __u8 rsvd3;
+ u32 rsvd2;
+ u8 rsvd3;
#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 tcp_hdr_words:4;
- __u8 ip_hdr_words:4;
+ u8 tcp_hdr_words:4;
+ u8 ip_hdr_words:4;
#else
- __u8 ip_hdr_words:4;
- __u8 tcp_hdr_words:4;
+ u8 ip_hdr_words:4;
+ u8 tcp_hdr_words:4;
#endif
- __u16 eth_type_mss;
+ u16 eth_type_mss;
};
struct cpl_rx_pkt {
- __u8 opcode;
+ u8 opcode;
#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 iff:4;
- __u8 csum_valid:1;
- __u8 bad_pkt:1;
- __u8 vlan_valid:1;
- __u8 rsvd:1;
+ u8 iff:4;
+ u8 csum_valid:1;
+ u8 bad_pkt:1;
+ u8 vlan_valid:1;
+ u8 rsvd:1;
#else
- __u8 rsvd:1;
- __u8 vlan_valid:1;
- __u8 bad_pkt:1;
- __u8 csum_valid:1;
- __u8 iff:4;
+ u8 rsvd:1;
+ u8 vlan_valid:1;
+ u8 bad_pkt:1;
+ u8 csum_valid:1;
+ u8 iff:4;
#endif
- __u16 csum;
- __u16 vlan;
- __u16 len;
+ u16 csum;
+ u16 vlan;
+ u16 len;
};
-#endif
+#endif /* _CXGB_CPL5_CMD_H_ */
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index 48c4d5a..28ae478 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: cxgb2.c *
- * $Revision: 1.11 $ *
- * $Date: 2005/03/23 07:41:27 $ *
+ * $Revision: 1.25 $ *
+ * $Date: 2005/06/22 00:43:25 $ *
* Description: *
* Chelsio 10Gb Ethernet Driver. *
* *
@@ -37,7 +37,6 @@
****************************************************************************/
#include "common.h"
-
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -48,19 +47,46 @@
#include <linux/mii.h>
#include <linux/sockios.h>
#include <linux/proc_fs.h>
-#include <linux/version.h>
-#include <linux/workqueue.h>
+#include <linux/dma-mapping.h>
#include <asm/uaccess.h>
-#include "ch_ethtool.h"
#include "cpl5_cmd.h"
#include "regs.h"
#include "gmac.h"
#include "cphy.h"
#include "sge.h"
-#include "tp.h"
#include "espi.h"
+#ifdef work_struct
+#include <linux/tqueue.h>
+#define INIT_WORK INIT_TQUEUE
+#define schedule_work schedule_task
+#define flush_scheduled_work flush_scheduled_tasks
+
+static inline void schedule_mac_stats_update(struct adapter *ap, int secs)
+{
+ mod_timer(&ap->stats_update_timer, jiffies + secs * HZ);
+}
+
+static inline void cancel_mac_stats_update(struct adapter *ap)
+{
+ del_timer_sync(&ap->stats_update_timer);
+ flush_scheduled_tasks();
+}
+
+/*
+ * Stats update timer for 2.4. It schedules a task to do the actual update as
+ * we need to access MAC statistics in process context.
+ */
+static void mac_stats_timer(unsigned long data)
+{
+ struct adapter *ap = (struct adapter *)data;
+
+ schedule_task(&ap->stats_update_task);
+}
+#else
+#include <linux/workqueue.h>
+
static inline void schedule_mac_stats_update(struct adapter *ap, int secs)
{
schedule_delayed_work(&ap->stats_update_task, secs * HZ);
@@ -70,23 +96,8 @@
{
cancel_delayed_work(&ap->stats_update_task);
}
-
-#if BITS_PER_LONG == 64 && !defined(CONFIG_X86_64)
-# define FMT64 "l"
-#else
-# define FMT64 "ll"
#endif
-# define DRV_TYPE ""
-# define MODULE_DESC "Chelsio Network Driver"
-
-static char driver_name[] = DRV_NAME;
-static char driver_string[] = "Chelsio " DRV_TYPE "Network Driver";
-static char driver_version[] = "2.1.0";
-
-#define PCI_DMA_64BIT ~0ULL
-#define PCI_DMA_32BIT 0xffffffffULL
-
#define MAX_CMDQ_ENTRIES 16384
#define MAX_CMDQ1_ENTRIES 1024
#define MAX_RX_BUFFERS 16384
@@ -107,10 +118,9 @@
*/
#define EEPROM_SIZE 32
-MODULE_DESCRIPTION(MODULE_DESC);
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_AUTHOR("Chelsio Communications");
MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
static int dflt_msg_enable = DFLT_MSG_ENABLE;
@@ -140,17 +150,17 @@
static void link_report(struct port_info *p)
{
if (!netif_carrier_ok(p->dev))
- printk(KERN_INFO "%s: link is down\n", p->dev->name);
+ printk(KERN_INFO "%s: link down\n", p->dev->name);
else {
- const char *s = "10 Mbps";
+ const char *s = "10Mbps";
switch (p->link_config.speed) {
- case SPEED_10000: s = "10 Gbps"; break;
- case SPEED_1000: s = "1000 Mbps"; break;
- case SPEED_100: s = "100 Mbps"; break;
+ case SPEED_10000: s = "10Gbps"; break;
+ case SPEED_1000: s = "1000Mbps"; break;
+ case SPEED_100: s = "100Mbps"; break;
}
- printk(KERN_INFO "%s: link is up at %s, %s duplex\n",
+ printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
p->dev->name, s,
p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
}
@@ -186,10 +196,8 @@
static void enable_hw_csum(struct adapter *adapter)
{
if (adapter->flags & TSO_CAPABLE)
- t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */
- if (adapter->flags & UDP_CSUM_CAPABLE)
- t1_tp_set_udp_checksum_offload(adapter->tp, 1);
- t1_tp_set_tcp_checksum_offload(adapter->tp, 1);
+ t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */
+ t1_tp_set_tcp_checksum_offload(adapter, 1);
}
/*
@@ -210,15 +218,13 @@
}
t1_interrupts_clear(adapter);
-
- if ((err = request_irq(adapter->pdev->irq, &t1_interrupt, SA_SHIRQ,
- adapter->name, adapter)))
+ if ((err = request_irq(adapter->pdev->irq,
+ t1_select_intr_handler(adapter), SA_SHIRQ,
+ adapter->name, adapter))) {
goto out_err;
-
+ }
t1_sge_start(adapter->sge);
t1_interrupts_enable(adapter);
-
- err = 0;
out_err:
return err;
}
@@ -339,47 +345,80 @@
}
static char stats_strings[][ETH_GSTRING_LEN] = {
- "TxOctetsOK",
- "TxOctetsBad",
- "TxUnicastFramesOK",
- "TxMulticastFramesOK",
- "TxBroadcastFramesOK",
- "TxPauseFrames",
- "TxFramesWithDeferredXmissions",
- "TxLateCollisions",
- "TxTotalCollisions",
- "TxFramesAbortedDueToXSCollisions",
- "TxUnderrun",
- "TxLengthErrors",
- "TxInternalMACXmitError",
- "TxFramesWithExcessiveDeferral",
- "TxFCSErrors",
+ "TxOctetsOK",
+ "TxOctetsBad",
+ "TxUnicastFramesOK",
+ "TxMulticastFramesOK",
+ "TxBroadcastFramesOK",
+ "TxPauseFrames",
+ "TxFramesWithDeferredXmissions",
+ "TxLateCollisions",
+ "TxTotalCollisions",
+ "TxFramesAbortedDueToXSCollisions",
+ "TxUnderrun",
+ "TxLengthErrors",
+ "TxInternalMACXmitError",
+ "TxFramesWithExcessiveDeferral",
+ "TxFCSErrors",
- "RxOctetsOK",
- "RxOctetsBad",
- "RxUnicastFramesOK",
- "RxMulticastFramesOK",
- "RxBroadcastFramesOK",
- "RxPauseFrames",
- "RxFCSErrors",
- "RxAlignErrors",
- "RxSymbolErrors",
- "RxDataErrors",
- "RxSequenceErrors",
- "RxRuntErrors",
- "RxJabberErrors",
- "RxInternalMACRcvError",
- "RxInRangeLengthErrors",
- "RxOutOfRangeLengthField",
- "RxFrameTooLongErrors"
+ "RxOctetsOK",
+ "RxOctetsBad",
+ "RxUnicastFramesOK",
+ "RxMulticastFramesOK",
+ "RxBroadcastFramesOK",
+ "RxPauseFrames",
+ "RxFCSErrors",
+ "RxAlignErrors",
+ "RxSymbolErrors",
+ "RxDataErrors",
+ "RxSequenceErrors",
+ "RxRuntErrors",
+ "RxJabberErrors",
+ "RxInternalMACRcvError",
+ "RxInRangeLengthErrors",
+ "RxOutOfRangeLengthField",
+ "RxFrameTooLongErrors",
+
+ "TSO",
+ "VLANextractions",
+ "VLANinsertions",
+ "RxCsumGood",
+ "TxCsumOffload",
+ "RxDrops"
+
+ "respQ_empty",
+ "respQ_overflow",
+ "freelistQ_empty",
+ "pkt_too_big",
+ "pkt_mismatch",
+ "cmdQ_full0",
+ "cmdQ_full1",
+ "tx_ipfrags",
+ "tx_reg_pkts",
+ "tx_lso_pkts",
+ "tx_do_cksum",
+
+ "espi_DIP2ParityErr",
+ "espi_DIP4Err",
+ "espi_RxDrops",
+ "espi_TxDrops",
+ "espi_RxOvfl",
+ "espi_ParityErr"
};
+
+#define T2_REGMAP_SIZE (3 * 1024)
+
+static int get_regs_len(struct net_device *dev)
+{
+ return T2_REGMAP_SIZE;
+}
static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
struct adapter *adapter = dev->priv;
- strcpy(info->driver, driver_name);
- strcpy(info->version, driver_version);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
strcpy(info->fw_version, "N/A");
strcpy(info->bus_info, pci_name(adapter->pdev));
}
@@ -401,42 +440,88 @@
struct adapter *adapter = dev->priv;
struct cmac *mac = adapter->port[dev->if_port].mac;
const struct cmac_statistics *s;
+ const struct sge_port_stats *ss;
+ const struct sge_intr_counts *t;
s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL);
+ ss = t1_sge_get_port_stats(adapter->sge, dev->if_port);
+ t = t1_sge_get_intr_counts(adapter->sge);
- *data++ = s->TxOctetsOK;
- *data++ = s->TxOctetsBad;
- *data++ = s->TxUnicastFramesOK;
- *data++ = s->TxMulticastFramesOK;
- *data++ = s->TxBroadcastFramesOK;
- *data++ = s->TxPauseFrames;
- *data++ = s->TxFramesWithDeferredXmissions;
- *data++ = s->TxLateCollisions;
- *data++ = s->TxTotalCollisions;
- *data++ = s->TxFramesAbortedDueToXSCollisions;
- *data++ = s->TxUnderrun;
- *data++ = s->TxLengthErrors;
- *data++ = s->TxInternalMACXmitError;
- *data++ = s->TxFramesWithExcessiveDeferral;
- *data++ = s->TxFCSErrors;
+ *data++ = s->TxOctetsOK;
+ *data++ = s->TxOctetsBad;
+ *data++ = s->TxUnicastFramesOK;
+ *data++ = s->TxMulticastFramesOK;
+ *data++ = s->TxBroadcastFramesOK;
+ *data++ = s->TxPauseFrames;
+ *data++ = s->TxFramesWithDeferredXmissions;
+ *data++ = s->TxLateCollisions;
+ *data++ = s->TxTotalCollisions;
+ *data++ = s->TxFramesAbortedDueToXSCollisions;
+ *data++ = s->TxUnderrun;
+ *data++ = s->TxLengthErrors;
+ *data++ = s->TxInternalMACXmitError;
+ *data++ = s->TxFramesWithExcessiveDeferral;
+ *data++ = s->TxFCSErrors;
- *data++ = s->RxOctetsOK;
- *data++ = s->RxOctetsBad;
- *data++ = s->RxUnicastFramesOK;
- *data++ = s->RxMulticastFramesOK;
- *data++ = s->RxBroadcastFramesOK;
- *data++ = s->RxPauseFrames;
- *data++ = s->RxFCSErrors;
- *data++ = s->RxAlignErrors;
- *data++ = s->RxSymbolErrors;
- *data++ = s->RxDataErrors;
- *data++ = s->RxSequenceErrors;
- *data++ = s->RxRuntErrors;
- *data++ = s->RxJabberErrors;
- *data++ = s->RxInternalMACRcvError;
- *data++ = s->RxInRangeLengthErrors;
- *data++ = s->RxOutOfRangeLengthField;
- *data++ = s->RxFrameTooLongErrors;
+ *data++ = s->RxOctetsOK;
+ *data++ = s->RxOctetsBad;
+ *data++ = s->RxUnicastFramesOK;
+ *data++ = s->RxMulticastFramesOK;
+ *data++ = s->RxBroadcastFramesOK;
+ *data++ = s->RxPauseFrames;
+ *data++ = s->RxFCSErrors;
+ *data++ = s->RxAlignErrors;
+ *data++ = s->RxSymbolErrors;
+ *data++ = s->RxDataErrors;
+ *data++ = s->RxSequenceErrors;
+ *data++ = s->RxRuntErrors;
+ *data++ = s->RxJabberErrors;
+ *data++ = s->RxInternalMACRcvError;
+ *data++ = s->RxInRangeLengthErrors;
+ *data++ = s->RxOutOfRangeLengthField;
+ *data++ = s->RxFrameTooLongErrors;
+
+ *data++ = ss->tso;
+ *data++ = ss->vlan_xtract;
+ *data++ = ss->vlan_insert;
+ *data++ = ss->rx_cso_good;
+ *data++ = ss->tx_cso;
+ *data++ = ss->rx_drops;
+
+ *data++ = (u64)t->respQ_empty;
+ *data++ = (u64)t->respQ_overflow;
+ *data++ = (u64)t->freelistQ_empty;
+ *data++ = (u64)t->pkt_too_big;
+ *data++ = (u64)t->pkt_mismatch;
+ *data++ = (u64)t->cmdQ_full[0];
+ *data++ = (u64)t->cmdQ_full[1];
+ *data++ = (u64)t->tx_ipfrags;
+ *data++ = (u64)t->tx_reg_pkts;
+ *data++ = (u64)t->tx_lso_pkts;
+ *data++ = (u64)t->tx_do_cksum;
+}
+
+static inline void reg_block_dump(struct adapter *ap, void *buf,
+ unsigned int start, unsigned int end)
+{
+ u32 *p = buf + start;
+
+ for ( ; start <= end; start += sizeof(u32))
+ *p++ = readl(ap->regs + start);
+}
+
+static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *buf)
+{
+ struct adapter *ap = dev->priv;
+
+ /*
+ * Version scheme: bits 0..9: chip version, bits 10..15: chip revision
+ */
+ regs->version = 2;
+
+ memset(buf, 0, T2_REGMAP_SIZE);
+ reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER);
}
static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
@@ -455,12 +540,12 @@
cmd->duplex = -1;
}
- cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
- cmd->phy_address = p->phy->addr;
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->autoneg = p->link_config.autoneg;
- cmd->maxtxpkt = 0;
- cmd->maxrxpkt = 0;
+ cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
+ cmd->phy_address = p->phy->addr;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->autoneg = p->link_config.autoneg;
+ cmd->maxtxpkt = 0;
+ cmd->maxrxpkt = 0;
return 0;
}
@@ -506,7 +591,7 @@
struct link_config *lc = &p->link_config;
if (!(lc->supported & SUPPORTED_Autoneg))
- return -EOPNOTSUPP; /* can't change speed/duplex */
+ return -EOPNOTSUPP; /* can't change speed/duplex */
if (cmd->autoneg == AUTONEG_DISABLE) {
int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
@@ -631,7 +716,7 @@
return -EINVAL;
if (adapter->flags & FULL_INIT_DONE)
- return -EBUSY;
+ return -EBUSY;
adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending;
adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending;
@@ -645,22 +730,20 @@
{
struct adapter *adapter = dev->priv;
- unsigned int sge_coalesce_usecs = 0;
+ /*
+ * If RX coalescing is requested we use NAPI, otherwise interrupts.
+ * This choice can be made only when all ports and the TOE are off.
+ */
+ if (adapter->open_device_map == 0)
+ adapter->params.sge.polling = c->use_adaptive_rx_coalesce;
- sge_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw;
- sge_coalesce_usecs /= board_info(adapter)->clock_core / 1000000;
- if ( (adapter->params.sge.coalesce_enable && !c->use_adaptive_rx_coalesce) &&
- (c->rx_coalesce_usecs == sge_coalesce_usecs) ) {
- adapter->params.sge.rx_coalesce_usecs =
- adapter->params.sge.default_rx_coalesce_usecs;
+ if (adapter->params.sge.polling) {
+ adapter->params.sge.rx_coalesce_usecs = 0;
} else {
adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
}
-
- adapter->params.sge.last_rx_coalesce_raw = adapter->params.sge.rx_coalesce_usecs;
- adapter->params.sge.last_rx_coalesce_raw *= (board_info(adapter)->clock_core / 1000000);
+ adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
adapter->params.sge.sample_interval_usecs = c->rate_sample_interval;
- adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge);
return 0;
}
@@ -669,12 +752,7 @@
{
struct adapter *adapter = dev->priv;
- if (adapter->params.sge.coalesce_enable) { /* Adaptive algorithm on */
- c->rx_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw;
- c->rx_coalesce_usecs /= board_info(adapter)->clock_core / 1000000;
- } else {
- c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs;
- }
+ c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs;
c->rate_sample_interval = adapter->params.sge.sample_interval_usecs;
c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable;
return 0;
@@ -682,9 +760,7 @@
static int get_eeprom_len(struct net_device *dev)
{
- struct adapter *adapter = dev->priv;
-
- return t1_is_asic(adapter) ? EEPROM_SIZE : 0;
+ return EEPROM_SIZE;
}
#define EEPROM_MAGIC(ap) \
@@ -728,118 +804,55 @@
.get_strings = get_strings,
.get_stats_count = get_stats_count,
.get_ethtool_stats = get_stats,
+ .get_regs_len = get_regs_len,
+ .get_regs = get_regs,
.get_tso = ethtool_op_get_tso,
.set_tso = set_tso,
};
-static int ethtool_ioctl(struct net_device *dev, void *useraddr)
+static void cxgb_proc_cleanup(struct adapter *adapter,
+ struct proc_dir_entry *dir)
{
- u32 cmd;
- struct adapter *adapter = dev->priv;
-
- if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
- return -EFAULT;
-
- switch (cmd) {
- case ETHTOOL_SETREG: {
- struct ethtool_reg edata;
-
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len)
- return -EINVAL;
- if (edata.addr == A_ESPI_MISC_CONTROL)
- t1_espi_set_misc_ctrl(adapter, edata.val);
- else {
- if (edata.addr == 0x950)
- t1_sge_set_ptimeout(adapter, edata.val);
- else
- writel(edata.val, adapter->regs + edata.addr);
- }
- break;
- }
- case ETHTOOL_GETREG: {
- struct ethtool_reg edata;
-
- if (copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len)
- return -EINVAL;
- if (edata.addr >= 0x900 && edata.addr <= 0x93c)
- edata.val = t1_espi_get_mon(adapter, edata.addr, 1);
- else {
- if (edata.addr == 0x950)
- edata.val = t1_sge_get_ptimeout(adapter);
- else
- edata.val = readl(adapter->regs + edata.addr);
- }
- if (copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- break;
- }
- case ETHTOOL_SETTPI: {
- struct ethtool_reg edata;
-
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- if ((edata.addr & 3) != 0)
- return -EINVAL;
- t1_tpi_write(adapter, edata.addr, edata.val);
- break;
- }
- case ETHTOOL_GETTPI: {
- struct ethtool_reg edata;
-
- if (copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- if ((edata.addr & 3) != 0)
- return -EINVAL;
- t1_tpi_read(adapter, edata.addr, &edata.val);
- if (copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- break;
- }
- default:
- return -EOPNOTSUPP;
- }
- return 0;
+ const char *name;
+ name = adapter->name;
+ remove_proc_entry(name, dir);
}
+//#define chtoe_setup_toedev(adapter) NULL
+#define update_mtu_tab(adapter)
+#define write_smt_entry(adapter, idx)
static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
{
- struct adapter *adapter = dev->priv;
- struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data;
+ struct adapter *adapter = dev->priv;
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data;
switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = adapter->port[dev->if_port].phy->addr;
- /* FALLTHRU */
- case SIOCGMIIREG: {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->port[dev->if_port].phy->addr;
+ /* FALLTHRU */
+ case SIOCGMIIREG: {
struct cphy *phy = adapter->port[dev->if_port].phy;
u32 val;
- if (!phy->mdio_read) return -EOPNOTSUPP;
+ if (!phy->mdio_read)
+ return -EOPNOTSUPP;
phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f,
&val);
- data->val_out = val;
- break;
+ data->val_out = val;
+ break;
}
- case SIOCSMIIREG: {
+ case SIOCSMIIREG: {
struct cphy *phy = adapter->port[dev->if_port].phy;
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- if (!phy->mdio_write) return -EOPNOTSUPP;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (!phy->mdio_write)
+ return -EOPNOTSUPP;
phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f,
- data->val_in);
- break;
+ data->val_in);
+ break;
}
- case SIOCCHETHTOOL:
- return ethtool_ioctl(dev, (void *)req->ifr_data);
default:
return -EOPNOTSUPP;
}
@@ -853,9 +866,9 @@
struct cmac *mac = adapter->port[dev->if_port].mac;
if (!mac->ops->set_mtu)
- return -EOPNOTSUPP;
+ return -EOPNOTSUPP;
if (new_mtu < 68)
- return -EINVAL;
+ return -EINVAL;
if ((ret = mac->ops->set_mtu(mac, new_mtu)))
return ret;
dev->mtu = new_mtu;
@@ -902,9 +915,12 @@
#ifdef CONFIG_NET_POLL_CONTROLLER
static void t1_netpoll(struct net_device *dev)
{
+ unsigned long flags;
struct adapter *adapter = dev->priv;
- t1_interrupt(adapter->pdev->irq, adapter, NULL);
+ local_irq_save(flags);
+ t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL);
+ local_irq_restore(flags);
}
#endif
@@ -938,16 +954,17 @@
*/
static void ext_intr_task(void *data)
{
- u32 enable;
struct adapter *adapter = data;
elmer0_ext_intr_handler(adapter);
/* Now reenable external interrupts */
- t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_EXT);
- enable = t1_read_reg_4(adapter, A_PL_ENABLE);
- t1_write_reg_4(adapter, A_PL_ENABLE, enable | F_PL_INTR_EXT);
+ spin_lock_irq(&adapter->async_lock);
adapter->slow_intr_mask |= F_PL_INTR_EXT;
+ writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE);
+ writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+ adapter->regs + A_PL_ENABLE);
+ spin_unlock_irq(&adapter->async_lock);
}
/*
@@ -955,15 +972,14 @@
*/
void t1_elmer0_ext_intr(struct adapter *adapter)
{
- u32 enable = t1_read_reg_4(adapter, A_PL_ENABLE);
-
/*
* Schedule a task to handle external interrupts as we require
* a process context. We disable EXT interrupts in the interim
* and let the task reenable them when it's done.
*/
adapter->slow_intr_mask &= ~F_PL_INTR_EXT;
- t1_write_reg_4(adapter, A_PL_ENABLE, enable & ~F_PL_INTR_EXT);
+ writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+ adapter->regs + A_PL_ENABLE);
schedule_work(&adapter->ext_intr_handler_task);
}
@@ -977,7 +993,6 @@
adapter->name);
}
-
static int __devinit init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -990,14 +1005,14 @@
struct port_info *pi;
if (!version_printed) {
- printk(KERN_INFO "%s - version %s\n", driver_string,
- driver_version);
+ printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION,
+ DRV_VERSION);
++version_printed;
}
err = pci_enable_device(pdev);
if (err)
- return err;
+ return err;
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
CH_ERR("%s: cannot find PCI device memory base address\n",
@@ -1006,20 +1021,22 @@
goto out_disable_pdev;
}
- if (!pci_set_dma_mask(pdev, PCI_DMA_64BIT)) {
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
pci_using_dac = 1;
- if (pci_set_consistent_dma_mask(pdev, PCI_DMA_64BIT)) {
+
+ if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
CH_ERR("%s: unable to obtain 64-bit DMA for"
"consistent allocations\n", pci_name(pdev));
err = -ENODEV;
goto out_disable_pdev;
}
- } else if ((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT)) != 0) {
+
+ } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) {
CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev));
goto out_disable_pdev;
}
- err = pci_request_regions(pdev, driver_name);
+ err = pci_request_regions(pdev, DRV_NAME);
if (err) {
CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev));
goto out_disable_pdev;
@@ -1027,7 +1044,7 @@
pci_set_master(pdev);
- mmio_start = pci_resource_start(pdev, 0);
+ mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
bi = t1_get_board_info(ent->driver_data);
@@ -1074,9 +1091,14 @@
ext_intr_task, adapter);
INIT_WORK(&adapter->stats_update_task, mac_stats_task,
adapter);
+#ifdef work_struct
+ init_timer(&adapter->stats_update_timer);
+ adapter->stats_update_timer.function = mac_stats_timer;
+ adapter->stats_update_timer.data =
+ (unsigned long)adapter;
+#endif
pci_set_drvdata(pdev, netdev);
-
}
pi = &adapter->port[i];
@@ -1088,11 +1110,12 @@
netdev->mem_end = mmio_start + mmio_len - 1;
netdev->priv = adapter;
netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ netdev->features |= NETIF_F_LLTX;
+
adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
if (vlan_tso_capable(adapter)) {
- adapter->flags |= UDP_CSUM_CAPABLE;
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
adapter->flags |= VLAN_ACCEL_CAPABLE;
netdev->features |=
@@ -1120,7 +1143,7 @@
#endif
netdev->weight = 64;
- SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops);
+ SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops);
}
if (t1_init_sw_modules(adapter, bi) < 0) {
@@ -1147,7 +1170,7 @@
if (!adapter->registered_device_map)
adapter->name = adapter->port[i].dev->name;
- __set_bit(i, &adapter->registered_device_map);
+ __set_bit(i, &adapter->registered_device_map);
}
}
if (!adapter->registered_device_map) {
@@ -1166,11 +1189,12 @@
t1_free_sw_modules(adapter);
out_free_dev:
if (adapter) {
- if (adapter->regs)
- iounmap(adapter->regs);
+ if (adapter->regs) iounmap(adapter->regs);
for (i = bi->port_number - 1; i >= 0; --i)
- if (adapter->port[i].dev)
- free_netdev(adapter->port[i].dev);
+ if (adapter->port[i].dev) {
+ cxgb_proc_cleanup(adapter, proc_root_driver);
+ kfree(adapter->port[i].dev);
+ }
}
pci_release_regions(pdev);
out_disable_pdev:
@@ -1200,8 +1224,10 @@
t1_free_sw_modules(adapter);
iounmap(adapter->regs);
while (--i >= 0)
- if (adapter->port[i].dev)
- free_netdev(adapter->port[i].dev);
+ if (adapter->port[i].dev) {
+ cxgb_proc_cleanup(adapter, proc_root_driver);
+ kfree(adapter->port[i].dev);
+ }
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
@@ -1210,7 +1236,7 @@
}
static struct pci_driver driver = {
- .name = driver_name,
+ .name = DRV_NAME,
.id_table = t1_pci_tbl,
.probe = init_one,
.remove = __devexit_p(remove_one),
@@ -1228,4 +1254,3 @@
module_init(t1_init_module);
module_exit(t1_cleanup_module);
-
diff --git a/drivers/net/chelsio/cxgb2.h b/drivers/net/chelsio/cxgb2.h
deleted file mode 100644
index 6ac326a..0000000
--- a/drivers/net/chelsio/cxgb2.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*****************************************************************************
- * *
- * File: cxgb2.h *
- * $Revision: 1.8 $ *
- * $Date: 2005/03/23 07:41:27 $ *
- * Description: *
- * part of the Chelsio 10Gb Ethernet Driver. *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License, version 2, as *
- * published by the Free Software Foundation. *
- * *
- * You should have received a copy of the GNU General Public License along *
- * with this program; if not, write to the Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
- * *
- * http://www.chelsio.com *
- * *
- * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
- * All rights reserved. *
- * *
- * Maintainers: maintainers@chelsio.com *
- * *
- * Authors: Dimitrios Michailidis <dm@chelsio.com> *
- * Tina Yang <tainay@chelsio.com> *
- * Felix Marti <felix@chelsio.com> *
- * Scott Bardone <sbardone@chelsio.com> *
- * Kurt Ottaway <kottaway@chelsio.com> *
- * Frank DiMambro <frank@chelsio.com> *
- * *
- * History: *
- * *
- ****************************************************************************/
-
-#ifndef __CXGB_LINUX_H__
-#define __CXGB_LINUX_H__
-
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/version.h>
-#include <asm/semaphore.h>
-#include <asm/bitops.h>
-
-/* This belongs in if_ether.h */
-#define ETH_P_CPL5 0xf
-
-struct cmac;
-struct cphy;
-
-struct port_info {
- struct net_device *dev;
- struct cmac *mac;
- struct cphy *phy;
- struct link_config link_config;
- struct net_device_stats netstats;
-};
-
-struct cxgbdev;
-struct t1_sge;
-struct pemc3;
-struct pemc4;
-struct pemc5;
-struct peulp;
-struct petp;
-struct pecspi;
-struct peespi;
-struct work_struct;
-struct vlan_group;
-
-enum { /* adapter flags */
- FULL_INIT_DONE = 0x1,
- USING_MSI = 0x2,
- TSO_CAPABLE = 0x4,
- TCP_CSUM_CAPABLE = 0x8,
- UDP_CSUM_CAPABLE = 0x10,
- VLAN_ACCEL_CAPABLE = 0x20,
- RX_CSUM_ENABLED = 0x40,
-};
-
-struct adapter {
- u8 *regs;
- struct pci_dev *pdev;
- unsigned long registered_device_map;
- unsigned long open_device_map;
- unsigned int flags;
-
- const char *name;
- int msg_enable;
- u32 mmio_len;
-
- struct work_struct ext_intr_handler_task;
- struct adapter_params params;
-
- struct vlan_group *vlan_grp;
-
- /* Terminator modules. */
- struct sge *sge;
- struct pemc3 *mc3;
- struct pemc4 *mc4;
- struct pemc5 *mc5;
- struct petp *tp;
- struct pecspi *cspi;
- struct peespi *espi;
- struct peulp *ulp;
-
- struct port_info port[MAX_NPORTS];
- struct work_struct stats_update_task;
- struct timer_list stats_update_timer;
-
- struct semaphore mib_mutex;
- spinlock_t tpi_lock;
- spinlock_t work_lock;
-
- spinlock_t async_lock ____cacheline_aligned; /* guards async operations */
- u32 slow_intr_mask;
-};
-
-#endif
diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h
index 08f1486..5590cb2 100644
--- a/drivers/net/chelsio/elmer0.h
+++ b/drivers/net/chelsio/elmer0.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: elmer0.h *
- * $Revision: 1.3 $ *
- * $Date: 2005/03/23 07:15:58 $ *
+ * $Revision: 1.6 $ *
+ * $Date: 2005/06/21 22:49:43 $ *
* Description: *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
@@ -36,14 +36,8 @@
* *
****************************************************************************/
-#ifndef CHELSIO_ELMER0_H
-#define CHELSIO_ELMER0_H
-
-/* ELMER0 flavors */
-enum {
- ELMER0_XC2S300E_6FT256_C,
- ELMER0_XC2S100E_6TQ144_C
-};
+#ifndef _CXGB_ELMER0_H_
+#define _CXGB_ELMER0_H_
/* ELMER0 registers */
#define A_ELMER0_VERSION 0x100000
@@ -154,4 +148,4 @@
#define MI1_OP_INDIRECT_READ_INC 2
#define MI1_OP_INDIRECT_READ 3
-#endif
+#endif /* _CXGB_ELMER0_H_ */
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c
index 7ec2dc7..2306425 100644
--- a/drivers/net/chelsio/espi.c
+++ b/drivers/net/chelsio/espi.c
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: espi.c *
- * $Revision: 1.9 $ *
- * $Date: 2005/03/23 07:41:27 $ *
+ * $Revision: 1.14 $ *
+ * $Date: 2005/05/14 00:59:32 $ *
* Description: *
* Ethernet SPI functionality. *
* part of the Chelsio 10Gb Ethernet Driver. *
@@ -63,15 +63,16 @@
{
int busy, attempts = TRICN_CMD_ATTEMPTS;
- t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) |
- V_REGISTER_OFFSET(reg_offset) |
- V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
- V_BUNDLE_ADDR(bundle_addr) |
- V_SPI4_COMMAND(TRICN_CMD_WRITE));
- t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0);
+ writel(V_WRITE_DATA(wr_data) |
+ V_REGISTER_OFFSET(reg_offset) |
+ V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
+ V_BUNDLE_ADDR(bundle_addr) |
+ V_SPI4_COMMAND(TRICN_CMD_WRITE),
+ adapter->regs + A_ESPI_CMD_ADDR);
+ writel(0, adapter->regs + A_ESPI_GOSTAT);
do {
- busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
+ busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
} while (busy && --attempts);
if (busy)
@@ -99,12 +100,12 @@
/* 1 */
timeout=1000;
do {
- stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET);
+ stat = readl(adapter->regs + A_ESPI_RX_RESET);
is_ready = (stat & 0x4);
timeout--;
udelay(5);
} while (!is_ready || (timeout==0));
- t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2);
+ writel(0x2, adapter->regs + A_ESPI_RX_RESET);
if (timeout==0)
{
CH_ERR("ESPI : ERROR : Timeout tricn_init() \n");
@@ -127,14 +128,14 @@
for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
/* 3 */
- t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3);
+ writel(0x3, adapter->regs + A_ESPI_RX_RESET);
return 0;
}
void t1_espi_intr_enable(struct peespi *espi)
{
- u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE);
+ u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
/*
* Cannot enable ESPI interrupts on T1B because HW asserts the
@@ -144,28 +145,28 @@
* cannot be cleared (HW bug).
*/
enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK;
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable);
- t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI);
+ writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
}
void t1_espi_intr_clear(struct peespi *espi)
{
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff);
- t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI);
+ writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
+ writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
}
void t1_espi_intr_disable(struct peespi *espi)
{
- u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE);
+ u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0);
- t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI);
+ writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
}
int t1_espi_intr_handler(struct peespi *espi)
{
u32 cnt;
- u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS);
+ u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
if (status & F_DIP4ERR)
espi->intr_cnt.DIP4_err++;
@@ -184,7 +185,7 @@
* Must read the error count to clear the interrupt
* that it causes.
*/
- cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT);
+ cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
}
/*
@@ -193,68 +194,28 @@
*/
if (status && t1_is_T1B(espi->adapter))
status = 1;
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status);
+ writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
return 0;
}
+const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
+{
+ return &espi->intr_cnt;
+}
+
static void espi_setup_for_pm3393(adapter_t *adapter)
{
u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark);
- t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3);
- t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008);
- t1_write_reg_4(adapter, A_PORT_CONFIG,
- V_RX_NPORTS(1) | V_TX_NPORTS(1));
-}
-
-static void espi_setup_for_vsc7321(adapter_t *adapter)
-{
- u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
-
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark);
- t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3);
- t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008);
- t1_write_reg_4(adapter, A_PORT_CONFIG,
- V_RX_NPORTS(1) | V_TX_NPORTS(1));
-}
-
-/*
- * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
- */
-static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
-{
- t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1);
- if (nports == 4) {
- if (is_T2(adapter)) {
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
- 0xf00);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
- 0x3c0);
- } else {
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
- 0x7ff);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
- 0x1ff);
- }
- } else {
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
- 0x1fff);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
- 0x7ff);
- }
- t1_write_reg_4(adapter, A_PORT_CONFIG,
- V_RX_NPORTS(nports) | V_TX_NPORTS(nports));
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3);
+ writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+ writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+ writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+ writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
+ writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
}
/* T2 Init part -- */
@@ -263,43 +224,42 @@
/* 3. Init TriCN Hard Macro */
int t1_espi_init(struct peespi *espi, int mac_type, int nports)
{
+ u32 cnt;
+
u32 status_enable_extra = 0;
adapter_t *adapter = espi->adapter;
- u32 cnt;
u32 status, burstval = 0x800100;
/* Disable ESPI training. MACs that can handle it enable it below. */
- t1_write_reg_4(adapter, A_ESPI_TRAIN, 0);
+ writel(0, adapter->regs + A_ESPI_TRAIN);
if (is_T2(adapter)) {
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
- V_OUT_OF_SYNC_COUNT(4) |
- V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1));
+ writel(V_OUT_OF_SYNC_COUNT(4) |
+ V_DIP2_PARITY_ERR_THRES(3) |
+ V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
if (nports == 4) {
/* T204: maxburst1 = 0x40, maxburst2 = 0x20 */
burstval = 0x200040;
}
}
- t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval);
+ writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
- if (mac_type == CHBT_MAC_PM3393)
+ switch (mac_type) {
+ case CHBT_MAC_PM3393:
espi_setup_for_pm3393(adapter);
- else if (mac_type == CHBT_MAC_VSC7321)
- espi_setup_for_vsc7321(adapter);
- else if (mac_type == CHBT_MAC_IXF1010) {
- status_enable_extra = F_INTEL1010MODE;
- espi_setup_for_ixf1010(adapter, nports);
- } else
+ break;
+ default:
return -1;
+ }
/*
* Make sure any pending interrupts from the SPI are
* Cleared before enabling the interrupt.
*/
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK);
- status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS);
+ writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
if (status & F_DIP2PARITYERR) {
- cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT);
+ cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
}
/*
@@ -308,10 +268,10 @@
*/
if (status && t1_is_T1B(espi->adapter))
status = 1;
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status);
+ writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
- t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE,
- status_enable_extra | F_RXSTATUSENABLE);
+ writel(status_enable_extra | F_RXSTATUSENABLE,
+ adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
if (is_T2(adapter)) {
tricn_init(adapter);
@@ -319,10 +279,10 @@
* Always position the control at the 1st port egress IN
* (sop,eop) counter to reduce PIOs for T/N210 workaround.
*/
- espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL)
+ espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL)
& ~MON_MASK) | (F_MONITORED_DIRECTION
| F_MONITORED_INTERFACE);
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_lock_init(&espi->lock);
}
@@ -354,15 +314,16 @@
spin_lock(&espi->lock);
espi->misc_ctrl = (val & ~MON_MASK) |
(espi->misc_ctrl & MON_MASK);
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_unlock(&espi->lock);
}
u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
{
- struct peespi *espi = adapter->espi;
u32 sel;
+ struct peespi *espi = adapter->espi;
+
if (!is_T2(adapter))
return 0;
sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
@@ -373,14 +334,13 @@
else
spin_lock(&espi->lock);
if ((sel != (espi->misc_ctrl & MON_MASK))) {
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
- ((espi->misc_ctrl & ~MON_MASK) | sel));
- sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3);
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
- espi->misc_ctrl);
+ writel(((espi->misc_ctrl & ~MON_MASK) | sel),
+ adapter->regs + A_ESPI_MISC_CONTROL);
+ sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
}
else
- sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3);
+ sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
spin_unlock(&espi->lock);
return sel;
}
diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h
index 0f84e8b..c90e37f 100644
--- a/drivers/net/chelsio/espi.h
+++ b/drivers/net/chelsio/espi.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: espi.h *
- * $Revision: 1.4 $ *
- * $Date: 2005/03/23 07:15:58 $ *
+ * $Revision: 1.7 $ *
+ * $Date: 2005/06/21 18:29:47 $ *
* Description: *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
@@ -36,8 +36,8 @@
* *
****************************************************************************/
-#ifndef CHELSIO_ESPI_H
-#define CHELSIO_ESPI_H
+#ifndef _CXGB_ESPI_H_
+#define _CXGB_ESPI_H_
#include "common.h"
@@ -60,8 +60,9 @@
void t1_espi_intr_clear(struct peespi *);
void t1_espi_intr_disable(struct peespi *);
int t1_espi_intr_handler(struct peespi *);
+const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi);
void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val);
u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait);
-#endif
+#endif /* _CXGB_ESPI_H_ */
diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h
index 24501e2..746b0ee 100644
--- a/drivers/net/chelsio/gmac.h
+++ b/drivers/net/chelsio/gmac.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: gmac.h *
- * $Revision: 1.3 $ *
- * $Date: 2005/03/23 07:15:58 $ *
+ * $Revision: 1.6 $ *
+ * $Date: 2005/06/21 18:29:47 $ *
* Description: *
* Generic MAC functionality. *
* part of the Chelsio 10Gb Ethernet Driver. *
@@ -37,8 +37,8 @@
* *
****************************************************************************/
-#ifndef CHELSIO_GMAC_H
-#define CHELSIO_GMAC_H
+#ifndef _CXGB_GMAC_H_
+#define _CXGB_GMAC_H_
#include "common.h"
@@ -130,4 +130,5 @@
extern struct gmac t1_vsc7321_ops;
extern struct gmac t1_ixf1010_ops;
extern struct gmac t1_dummy_mac_ops;
-#endif
+
+#endif /* _CXGB_GMAC_H_ */
diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c
index f54133a..db503428 100644
--- a/drivers/net/chelsio/mv88x201x.c
+++ b/drivers/net/chelsio/mv88x201x.c
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: mv88x201x.c *
- * $Revision: 1.7 $ *
- * $Date: 2005/03/23 07:15:59 $ *
+ * $Revision: 1.12 $ *
+ * $Date: 2005/04/15 19:27:14 $ *
* Description: *
* Marvell PHY (mv88x201x) functionality. *
* part of the Chelsio 10Gb Ethernet Driver. *
@@ -85,33 +85,29 @@
static int mv88x201x_interrupt_enable(struct cphy *cphy)
{
+ u32 elmer;
+
/* Enable PHY LASI interrupts. */
mdio_write(cphy, 0x1, 0x9002, 0x1);
/* Enable Marvell interrupts through Elmer0. */
- if (t1_is_asic(cphy->adapter)) {
- u32 elmer;
-
- t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
- elmer |= ELMER0_GP_BIT6;
- t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
- }
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer |= ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
return 0;
}
static int mv88x201x_interrupt_disable(struct cphy *cphy)
{
+ u32 elmer;
+
/* Disable PHY LASI interrupts. */
mdio_write(cphy, 0x1, 0x9002, 0x0);
/* Disable Marvell interrupts through Elmer0. */
- if (t1_is_asic(cphy->adapter)) {
- u32 elmer;
-
- t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
- elmer &= ~ELMER0_GP_BIT6;
- t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
- }
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer &= ~ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
return 0;
}
@@ -144,11 +140,9 @@
#endif
/* Clear Marvell interrupts through Elmer0. */
- if (t1_is_asic(cphy->adapter)) {
- t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
- elmer |= ELMER0_GP_BIT6;
- t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
- }
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+ elmer |= ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
return 0;
}
diff --git a/drivers/net/chelsio/osdep.h b/drivers/net/chelsio/osdep.h
deleted file mode 100644
index 095cb47..0000000
--- a/drivers/net/chelsio/osdep.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*****************************************************************************
- * *
- * File: osdep.h *
- * $Revision: 1.9 $ *
- * $Date: 2005/03/23 07:41:27 $ *
- * Description: *
- * part of the Chelsio 10Gb Ethernet Driver. *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License, version 2, as *
- * published by the Free Software Foundation. *
- * *
- * You should have received a copy of the GNU General Public License along *
- * with this program; if not, write to the Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
- * *
- * http://www.chelsio.com *
- * *
- * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
- * All rights reserved. *
- * *
- * Maintainers: maintainers@chelsio.com *
- * *
- * Authors: Dimitrios Michailidis <dm@chelsio.com> *
- * Tina Yang <tainay@chelsio.com> *
- * Felix Marti <felix@chelsio.com> *
- * Scott Bardone <sbardone@chelsio.com> *
- * Kurt Ottaway <kottaway@chelsio.com> *
- * Frank DiMambro <frank@chelsio.com> *
- * *
- * History: *
- * *
- ****************************************************************************/
-
-#ifndef __CHELSIO_OSDEP_H
-#define __CHELSIO_OSDEP_H
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/crc32.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#include "cxgb2.h"
-
-#define DRV_NAME "cxgb"
-#define PFX DRV_NAME ": "
-
-#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__)
-#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__)
-#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__)
-
-/*
- * More powerful macro that selectively prints messages based on msg_enable.
- * For info and debugging messages.
- */
-#define CH_MSG(adapter, level, category, fmt, ...) do { \
- if ((adapter)->msg_enable & NETIF_MSG_##category) \
- printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \
- ## __VA_ARGS__); \
-} while (0)
-
-#ifdef DEBUG
-# define CH_DBG(adapter, category, fmt, ...) \
- CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__)
-#else
-# define CH_DBG(fmt, ...)
-#endif
-
-/* Additional NETIF_MSG_* categories */
-#define NETIF_MSG_MMIO 0x8000000
-
-#define CH_DEVICE(devid, ssid, idx) \
- { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
-
-#define SUPPORTED_PAUSE (1 << 13)
-#define SUPPORTED_LOOPBACK (1 << 15)
-
-#define ADVERTISED_PAUSE (1 << 13)
-#define ADVERTISED_ASYM_PAUSE (1 << 14)
-
-/*
- * Now that we have included the driver's main data structure,
- * we typedef it to something the rest of the system understands.
- */
-typedef struct adapter adapter_t;
-
-#define TPI_LOCK(adapter) spin_lock(&(adapter)->tpi_lock)
-#define TPI_UNLOCK(adapter) spin_unlock(&(adapter)->tpi_lock)
-
-void t1_elmer0_ext_intr(adapter_t *adapter);
-void t1_link_changed(adapter_t *adapter, int port_id, int link_status,
- int speed, int duplex, int fc);
-
-static inline u16 t1_read_reg_2(adapter_t *adapter, u32 reg_addr)
-{
- u16 val = readw(adapter->regs + reg_addr);
-
- CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr,
- val);
- return val;
-}
-
-static inline void t1_write_reg_2(adapter_t *adapter, u32 reg_addr, u16 val)
-{
- CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr,
- val);
- writew(val, adapter->regs + reg_addr);
-}
-
-static inline u32 t1_read_reg_4(adapter_t *adapter, u32 reg_addr)
-{
- u32 val = readl(adapter->regs + reg_addr);
-
- CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr,
- val);
- return val;
-}
-
-static inline void t1_write_reg_4(adapter_t *adapter, u32 reg_addr, u32 val)
-{
- CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr,
- val);
- writel(val, adapter->regs + reg_addr);
-}
-
-static inline const char *port_name(adapter_t *adapter, int port_idx)
-{
- return adapter->port[port_idx].dev->name;
-}
-
-static inline void t1_set_hw_addr(adapter_t *adapter, int port_idx,
- u8 hw_addr[])
-{
- memcpy(adapter->port[port_idx].dev->dev_addr, hw_addr, ETH_ALEN);
-}
-
-struct t1_rx_mode {
- struct net_device *dev;
- u32 idx;
- struct dev_mc_list *list;
-};
-
-#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC)
-#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI)
-#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count)
-
-static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
-{
- u8 *addr = 0;
-
- if (rm->idx++ < rm->dev->mc_count) {
- addr = rm->list->dmi_addr;
- rm->list = rm->list->next;
- }
- return addr;
-}
-
-#endif
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c
index 17bd20f..04a1404 100644
--- a/drivers/net/chelsio/pm3393.c
+++ b/drivers/net/chelsio/pm3393.c
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: pm3393.c *
- * $Revision: 1.9 $ *
- * $Date: 2005/03/23 07:41:27 $ *
+ * $Revision: 1.16 $ *
+ * $Date: 2005/05/14 00:59:32 $ *
* Description: *
* PMC/SIERRA (pm3393) MAC-PHY functionality. *
* part of the Chelsio 10Gb Ethernet Driver. *
@@ -45,15 +45,19 @@
/* 802.3ae 10Gb/s MDIO Manageable Device(MMD)
*/
-#define MMD_RESERVED 0
-#define MMD_PMAPMD 1
-#define MMD_WIS 2
-#define MMD_PCS 3
-#define MMD_PHY_XGXS 4 /* XGMII Extender Sublayer */
-#define MMD_DTE_XGXS 5
+enum {
+ MMD_RESERVED,
+ MMD_PMAPMD,
+ MMD_WIS,
+ MMD_PCS,
+ MMD_PHY_XGXS, /* XGMII Extender Sublayer */
+ MMD_DTE_XGXS,
+};
-#define PHY_XGXS_CTRL_1 0
-#define PHY_XGXS_STATUS_1 1
+enum {
+ PHY_XGXS_CTRL_1,
+ PHY_XGXS_STATUS_1
+};
#define OFFSET(REG_ADDR) (REG_ADDR << 2)
@@ -160,9 +164,9 @@
0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ );
/* TERMINATOR - PL_INTERUPTS_EXT */
- pl_intr = t1_read_reg_4(cmac->adapter, A_PL_ENABLE);
+ pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE);
pl_intr |= F_PL_INTR_EXT;
- t1_write_reg_4(cmac->adapter, A_PL_ENABLE, pl_intr);
+ writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE);
return 0;
}
@@ -242,9 +246,9 @@
/* TERMINATOR - PL_INTERUPTS_EXT
*/
- pl_intr = t1_read_reg_4(cmac->adapter, A_PL_CAUSE);
+ pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE);
pl_intr |= F_PL_INTR_EXT;
- t1_write_reg_4(cmac->adapter, A_PL_CAUSE, pl_intr);
+ writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE);
return 0;
}
@@ -261,8 +265,6 @@
/* Read the master interrupt status register. */
pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS,
&master_intr_status);
- CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n",
- master_intr_status);
/* TBD XXX Lets just clear everything for now */
pm3393_interrupt_clear(cmac);
@@ -703,10 +705,9 @@
t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */
/* For T1 use timer based Mac flow control. */
- if (t1_is_T1B(adapter))
- t1_tpi_write(adapter, OFFSET(0x304d), 0x8000);
+ t1_tpi_write(adapter, OFFSET(0x304d), 0x8000);
t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */
- t1_tpi_write(adapter, OFFSET(0x2049), 0x0000); /* # RXXG Cut Through */
+ t1_tpi_write(adapter, OFFSET(0x2049), 0x0001); /* # RXXG Cut Through */
t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */
/* Setup Exact Match Filter 0 to allow broadcast packets.
@@ -814,12 +815,6 @@
successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock
&& is_xaui_mabc_pll_locked);
-
- CH_DBG(adapter, HW,
- "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, "
- "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n",
- i, is_pl4_reset_finished, val, is_pl4_outof_lock,
- is_xaui_mabc_pll_locked);
}
return successful_reset ? 0 : 1;
}
diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h
index 5a70803..b90e11f 100644
--- a/drivers/net/chelsio/regs.h
+++ b/drivers/net/chelsio/regs.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: regs.h *
- * $Revision: 1.4 $ *
- * $Date: 2005/03/23 07:15:59 $ *
+ * $Revision: 1.8 $ *
+ * $Date: 2005/06/21 18:29:48 $ *
* Description: *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
@@ -36,7 +36,8 @@
* *
****************************************************************************/
-/* Do not edit this file */
+#ifndef _CXGB_REGS_H_
+#define _CXGB_REGS_H_
/* SGE registers */
#define A_SG_CONTROL 0x0
@@ -74,6 +75,14 @@
#define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS)
#define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U)
+#define S_DISABLE_FL0_GTS 10
+#define V_DISABLE_FL0_GTS(x) ((x) << S_DISABLE_FL0_GTS)
+#define F_DISABLE_FL0_GTS V_DISABLE_FL0_GTS(1U)
+
+#define S_DISABLE_FL1_GTS 11
+#define V_DISABLE_FL1_GTS(x) ((x) << S_DISABLE_FL1_GTS)
+#define F_DISABLE_FL1_GTS V_DISABLE_FL1_GTS(1U)
+
#define S_ENABLE_BIG_ENDIAN 12
#define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN)
#define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U)
@@ -132,6 +141,7 @@
#define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U)
#define A_SG_INT_CAUSE 0xbc
+#define A_SG_RESPACCUTIMER 0xc0
/* MC3 registers */
@@ -247,6 +257,10 @@
#define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER)
#define A_TP_PC_CONFIG 0x348
+#define S_DIS_TX_FILL_WIN_PUSH 12
+#define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH)
+#define F_DIS_TX_FILL_WIN_PUSH V_DIS_TX_FILL_WIN_PUSH(1U)
+
#define S_TP_PC_REV 30
#define M_TP_PC_REV 0x3
#define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV)
@@ -451,3 +465,4 @@
#define M_PCI_MODE_CLK 0x3
#define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK)
+#endif /* _CXGB_REGS_H_ */
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index bcf8b1e..53b41d9 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: sge.c *
- * $Revision: 1.13 $ *
- * $Date: 2005/03/23 07:41:27 $ *
+ * $Revision: 1.26 $ *
+ * $Date: 2005/06/21 18:29:48 $ *
* Description: *
* DMA engine. *
* part of the Chelsio 10Gb Ethernet Driver. *
@@ -58,59 +58,62 @@
#include "regs.h"
#include "espi.h"
+
+#ifdef NETIF_F_TSO
#include <linux/tcp.h>
+#endif
#define SGE_CMDQ_N 2
#define SGE_FREELQ_N 2
-#define SGE_CMDQ0_E_N 512
+#define SGE_CMDQ0_E_N 1024
#define SGE_CMDQ1_E_N 128
#define SGE_FREEL_SIZE 4096
#define SGE_JUMBO_FREEL_SIZE 512
#define SGE_FREEL_REFILL_THRESH 16
#define SGE_RESPQ_E_N 1024
-#define SGE_INTR_BUCKETSIZE 100
-#define SGE_INTR_LATBUCKETS 5
-#define SGE_INTR_MAXBUCKETS 11
-#define SGE_INTRTIMER0 1
-#define SGE_INTRTIMER1 50
-#define SGE_INTRTIMER_NRES 10000
-#define SGE_RX_COPY_THRESHOLD 256
+#define SGE_INTRTIMER_NRES 1000
+#define SGE_RX_COPY_THRES 256
#define SGE_RX_SM_BUF_SIZE 1536
-#define SGE_RESPQ_REPLENISH_THRES ((3 * SGE_RESPQ_E_N) / 4)
+# define SGE_RX_DROP_THRES 2
-#define SGE_RX_OFFSET 2
-#ifndef NET_IP_ALIGN
-# define NET_IP_ALIGN SGE_RX_OFFSET
-#endif
+#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4)
/*
- * Memory Mapped HW Command, Freelist and Response Queue Descriptors
+ * Period of the TX buffer reclaim timer. This timer does not need to run
+ * frequently as TX buffers are usually reclaimed by new TX packets.
+ */
+#define TX_RECLAIM_PERIOD (HZ / 4)
+
+#ifndef NET_IP_ALIGN
+# define NET_IP_ALIGN 2
+#endif
+
+#define M_CMD_LEN 0x7fffffff
+#define V_CMD_LEN(v) (v)
+#define G_CMD_LEN(v) ((v) & M_CMD_LEN)
+#define V_CMD_GEN1(v) ((v) << 31)
+#define V_CMD_GEN2(v) (v)
+#define F_CMD_DATAVALID (1 << 1)
+#define F_CMD_SOP (1 << 2)
+#define V_CMD_EOP(v) ((v) << 3)
+
+/*
+ * Command queue, receive buffer list, and response queue descriptors.
*/
#if defined(__BIG_ENDIAN_BITFIELD)
struct cmdQ_e {
- u32 AddrLow;
- u32 GenerationBit : 1;
- u32 BufferLength : 31;
- u32 RespQueueSelector : 4;
- u32 ResponseTokens : 12;
- u32 CmdId : 8;
- u32 Reserved : 3;
- u32 TokenValid : 1;
- u32 Eop : 1;
- u32 Sop : 1;
- u32 DataValid : 1;
- u32 GenerationBit2 : 1;
- u32 AddrHigh;
+ u32 addr_lo;
+ u32 len_gen;
+ u32 flags;
+ u32 addr_hi;
};
struct freelQ_e {
- u32 AddrLow;
- u32 GenerationBit : 1;
- u32 BufferLength : 31;
- u32 Reserved : 31;
- u32 GenerationBit2 : 1;
- u32 AddrHigh;
+ u32 addr_lo;
+ u32 len_gen;
+ u32 gen2;
+ u32 addr_hi;
};
struct respQ_e {
@@ -128,31 +131,19 @@
u32 GenerationBit : 1;
u32 BufferLength;
};
-
#elif defined(__LITTLE_ENDIAN_BITFIELD)
struct cmdQ_e {
- u32 BufferLength : 31;
- u32 GenerationBit : 1;
- u32 AddrLow;
- u32 AddrHigh;
- u32 GenerationBit2 : 1;
- u32 DataValid : 1;
- u32 Sop : 1;
- u32 Eop : 1;
- u32 TokenValid : 1;
- u32 Reserved : 3;
- u32 CmdId : 8;
- u32 ResponseTokens : 12;
- u32 RespQueueSelector : 4;
+ u32 len_gen;
+ u32 addr_lo;
+ u32 addr_hi;
+ u32 flags;
};
struct freelQ_e {
- u32 BufferLength : 31;
- u32 GenerationBit : 1;
- u32 AddrLow;
- u32 AddrHigh;
- u32 GenerationBit2 : 1;
- u32 Reserved : 31;
+ u32 len_gen;
+ u32 addr_lo;
+ u32 addr_hi;
+ u32 gen2;
};
struct respQ_e {
@@ -179,7 +170,6 @@
struct sk_buff *skb;
DECLARE_PCI_UNMAP_ADDR(dma_addr);
DECLARE_PCI_UNMAP_LEN(dma_len);
- unsigned int single;
};
struct freelQ_ce {
@@ -189,44 +179,52 @@
};
/*
- * SW Command, Freelist and Response Queue
+ * SW command, freelist and response rings
*/
struct cmdQ {
- atomic_t asleep; /* HW DMA Fetch status */
- atomic_t credits; /* # available descriptors for TX */
- atomic_t pio_pidx; /* Variable updated on Doorbell */
- u16 entries_n; /* # descriptors for TX */
- u16 pidx; /* producer index (SW) */
- u16 cidx; /* consumer index (HW) */
- u8 genbit; /* current generation (=valid) bit */
- struct cmdQ_e *entries; /* HW command descriptor Q */
- struct cmdQ_ce *centries; /* SW command context descriptor Q */
- spinlock_t Qlock; /* Lock to protect cmdQ enqueuing */
- dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */
+ unsigned long status; /* HW DMA fetch status */
+ unsigned int in_use; /* # of in-use command descriptors */
+ unsigned int size; /* # of descriptors */
+ unsigned int processed; /* total # of descs HW has processed */
+ unsigned int cleaned; /* total # of descs SW has reclaimed */
+ unsigned int stop_thres; /* SW TX queue suspend threshold */
+ u16 pidx; /* producer index (SW) */
+ u16 cidx; /* consumer index (HW) */
+ u8 genbit; /* current generation (=valid) bit */
+ u8 sop; /* is next entry start of packet? */
+ struct cmdQ_e *entries; /* HW command descriptor Q */
+ struct cmdQ_ce *centries; /* SW command context descriptor Q */
+ spinlock_t lock; /* Lock to protect cmdQ enqueuing */
+ dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */
};
struct freelQ {
- unsigned int credits; /* # of available RX buffers */
- unsigned int entries_n; /* free list capacity */
- u16 pidx; /* producer index (SW) */
- u16 cidx; /* consumer index (HW) */
+ unsigned int credits; /* # of available RX buffers */
+ unsigned int size; /* free list capacity */
+ u16 pidx; /* producer index (SW) */
+ u16 cidx; /* consumer index (HW) */
u16 rx_buffer_size; /* Buffer size on this free list */
u16 dma_offset; /* DMA offset to align IP headers */
- u8 genbit; /* current generation (=valid) bit */
- struct freelQ_e *entries; /* HW freelist descriptor Q */
- struct freelQ_ce *centries; /* SW freelist conext descriptor Q */
- dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */
+ u16 recycleq_idx; /* skb recycle q to use */
+ u8 genbit; /* current generation (=valid) bit */
+ struct freelQ_e *entries; /* HW freelist descriptor Q */
+ struct freelQ_ce *centries; /* SW freelist context descriptor Q */
+ dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */
};
struct respQ {
- u16 credits; /* # of available respQ descriptors */
- u16 credits_pend; /* # of not yet returned descriptors */
- u16 entries_n; /* # of response Q descriptors */
- u16 pidx; /* producer index (HW) */
- u16 cidx; /* consumer index (SW) */
- u8 genbit; /* current generation(=valid) bit */
+ unsigned int credits; /* credits to be returned to SGE */
+ unsigned int size; /* # of response Q descriptors */
+ u16 cidx; /* consumer index (SW) */
+ u8 genbit; /* current generation(=valid) bit */
struct respQ_e *entries; /* HW response descriptor Q */
- dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */
+ dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */
+};
+
+/* Bit flags for cmdQ.status */
+enum {
+ CMDQ_STAT_RUNNING = 1, /* fetch engine is running */
+ CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */
};
/*
@@ -239,134 +237,50 @@
*/
struct sge {
struct adapter *adapter; /* adapter backpointer */
- struct freelQ freelQ[SGE_FREELQ_N]; /* freelist Q(s) */
- struct respQ respQ; /* response Q instatiation */
+ struct net_device *netdev; /* netdevice backpointer */
+ struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */
+ struct respQ respQ; /* response Q */
+ unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */
unsigned int rx_pkt_pad; /* RX padding for L2 packets */
unsigned int jumbo_fl; /* jumbo freelist Q index */
- u32 intrtimer[SGE_INTR_MAXBUCKETS]; /* ! */
- u32 currIndex; /* current index into intrtimer[] */
- u32 intrtimer_nres; /* no resource interrupt timer value */
- u32 sge_control; /* shadow content of sge control reg */
- struct sge_intr_counts intr_cnt;
- struct timer_list ptimer;
- struct sk_buff *pskb;
- u32 ptimeout;
- struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned; /* command Q(s)*/
+ unsigned int intrtimer_nres; /* no-resource interrupt timer */
+ unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */
+ struct timer_list tx_reclaim_timer; /* reclaims TX buffers */
+ struct timer_list espibug_timer;
+ unsigned int espibug_timeout;
+ struct sk_buff *espibug_skb;
+ u32 sge_control; /* shadow value of sge control reg */
+ struct sge_intr_counts stats;
+ struct sge_port_stats port_stats[MAX_NPORTS];
+ struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp;
};
-static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
- unsigned int qid);
-
/*
* PIO to indicate that memory mapped Q contains valid descriptor(s).
*/
-static inline void doorbell_pio(struct sge *sge, u32 val)
+static inline void doorbell_pio(struct adapter *adapter, u32 val)
{
wmb();
- t1_write_reg_4(sge->adapter, A_SG_DOORBELL, val);
-}
-
-/*
- * Disables the DMA engine.
- */
-void t1_sge_stop(struct sge *sge)
-{
- t1_write_reg_4(sge->adapter, A_SG_CONTROL, 0);
- t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */
- if (is_T2(sge->adapter))
- del_timer_sync(&sge->ptimer);
-}
-
-static u8 ch_mac_addr[ETH_ALEN] = {0x0, 0x7, 0x43, 0x0, 0x0, 0x0};
-static void t1_espi_workaround(void *data)
-{
- struct adapter *adapter = (struct adapter *)data;
- struct sge *sge = adapter->sge;
-
- if (netif_running(adapter->port[0].dev) &&
- atomic_read(&sge->cmdQ[0].asleep)) {
-
- u32 seop = t1_espi_get_mon(adapter, 0x930, 0);
-
- if ((seop & 0xfff0fff) == 0xfff && sge->pskb) {
- struct sk_buff *skb = sge->pskb;
- if (!skb->cb[0]) {
- memcpy(skb->data+sizeof(struct cpl_tx_pkt), ch_mac_addr, ETH_ALEN);
- memcpy(skb->data+skb->len-10, ch_mac_addr, ETH_ALEN);
-
- skb->cb[0] = 0xff;
- }
- t1_sge_tx(skb, adapter,0);
- }
- }
- mod_timer(&adapter->sge->ptimer, jiffies + sge->ptimeout);
-}
-
-/*
- * Enables the DMA engine.
- */
-void t1_sge_start(struct sge *sge)
-{
- t1_write_reg_4(sge->adapter, A_SG_CONTROL, sge->sge_control);
- t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */
- if (is_T2(sge->adapter)) {
- init_timer(&sge->ptimer);
- sge->ptimer.function = (void *)&t1_espi_workaround;
- sge->ptimer.data = (unsigned long)sge->adapter;
- sge->ptimer.expires = jiffies + sge->ptimeout;
- add_timer(&sge->ptimer);
- }
-}
-
-/*
- * Creates a t1_sge structure and returns suggested resource parameters.
- */
-struct sge * __devinit t1_sge_create(struct adapter *adapter,
- struct sge_params *p)
-{
- struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL);
-
- if (!sge)
- return NULL;
- memset(sge, 0, sizeof(*sge));
-
- if (is_T2(adapter))
- sge->ptimeout = 1; /* finest allowed */
-
- sge->adapter = adapter;
- sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : SGE_RX_OFFSET;
- sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0;
-
- p->cmdQ_size[0] = SGE_CMDQ0_E_N;
- p->cmdQ_size[1] = SGE_CMDQ1_E_N;
- p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE;
- p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE;
- p->rx_coalesce_usecs = SGE_INTRTIMER1;
- p->last_rx_coalesce_raw = SGE_INTRTIMER1 *
- (board_info(sge->adapter)->clock_core / 1000000);
- p->default_rx_coalesce_usecs = SGE_INTRTIMER1;
- p->coalesce_enable = 0; /* Turn off adaptive algorithm by default */
- p->sample_interval_usecs = 0;
- return sge;
+ writel(val, adapter->regs + A_SG_DOORBELL);
}
/*
* Frees all RX buffers on the freelist Q. The caller must make sure that
* the SGE is turned off before calling this function.
*/
-static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *Q)
+static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q)
{
- unsigned int cidx = Q->cidx, credits = Q->credits;
+ unsigned int cidx = q->cidx;
- while (credits--) {
- struct freelQ_ce *ce = &Q->centries[cidx];
+ while (q->credits--) {
+ struct freelQ_ce *ce = &q->centries[cidx];
pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
pci_unmap_len(ce, dma_len),
PCI_DMA_FROMDEVICE);
dev_kfree_skb(ce->skb);
ce->skb = NULL;
- if (++cidx == Q->entries_n)
+ if (++cidx == q->size)
cidx = 0;
}
}
@@ -380,29 +294,29 @@
unsigned int size, i;
if (sge->respQ.entries) {
- size = sizeof(struct respQ_e) * sge->respQ.entries_n;
+ size = sizeof(struct respQ_e) * sge->respQ.size;
pci_free_consistent(pdev, size, sge->respQ.entries,
sge->respQ.dma_addr);
}
for (i = 0; i < SGE_FREELQ_N; i++) {
- struct freelQ *Q = &sge->freelQ[i];
+ struct freelQ *q = &sge->freelQ[i];
- if (Q->centries) {
- free_freelQ_buffers(pdev, Q);
- kfree(Q->centries);
+ if (q->centries) {
+ free_freelQ_buffers(pdev, q);
+ kfree(q->centries);
}
- if (Q->entries) {
- size = sizeof(struct freelQ_e) * Q->entries_n;
- pci_free_consistent(pdev, size, Q->entries,
- Q->dma_addr);
+ if (q->entries) {
+ size = sizeof(struct freelQ_e) * q->size;
+ pci_free_consistent(pdev, size, q->entries,
+ q->dma_addr);
}
}
}
/*
* Allocates basic RX resources, consisting of memory mapped freelist Qs and a
- * response Q.
+ * response queue.
*/
static int alloc_rx_resources(struct sge *sge, struct sge_params *p)
{
@@ -410,21 +324,22 @@
unsigned int size, i;
for (i = 0; i < SGE_FREELQ_N; i++) {
- struct freelQ *Q = &sge->freelQ[i];
+ struct freelQ *q = &sge->freelQ[i];
- Q->genbit = 1;
- Q->entries_n = p->freelQ_size[i];
- Q->dma_offset = SGE_RX_OFFSET - sge->rx_pkt_pad;
- size = sizeof(struct freelQ_e) * Q->entries_n;
- Q->entries = (struct freelQ_e *)
- pci_alloc_consistent(pdev, size, &Q->dma_addr);
- if (!Q->entries)
+ q->genbit = 1;
+ q->size = p->freelQ_size[i];
+ q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN;
+ size = sizeof(struct freelQ_e) * q->size;
+ q->entries = (struct freelQ_e *)
+ pci_alloc_consistent(pdev, size, &q->dma_addr);
+ if (!q->entries)
goto err_no_mem;
- memset(Q->entries, 0, size);
- Q->centries = kcalloc(Q->entries_n, sizeof(struct freelQ_ce),
- GFP_KERNEL);
- if (!Q->centries)
+ memset(q->entries, 0, size);
+ size = sizeof(struct freelQ_ce) * q->size;
+ q->centries = kmalloc(size, GFP_KERNEL);
+ if (!q->centries)
goto err_no_mem;
+ memset(q->centries, 0, size);
}
/*
@@ -440,10 +355,17 @@
sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) -
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+ /*
+ * Setup which skb recycle Q should be used when recycling buffers from
+ * each free list.
+ */
+ sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0;
+ sge->freelQ[sge->jumbo_fl].recycleq_idx = 1;
+
sge->respQ.genbit = 1;
- sge->respQ.entries_n = SGE_RESPQ_E_N;
- sge->respQ.credits = SGE_RESPQ_E_N;
- size = sizeof(struct respQ_e) * sge->respQ.entries_n;
+ sge->respQ.size = SGE_RESPQ_E_N;
+ sge->respQ.credits = 0;
+ size = sizeof(struct respQ_e) * sge->respQ.size;
sge->respQ.entries = (struct respQ_e *)
pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr);
if (!sge->respQ.entries)
@@ -457,48 +379,37 @@
}
/*
- * Frees 'credits_pend' TX buffers and returns the credits to Q->credits.
- *
- * The adaptive algorithm receives the total size of the buffers freed
- * accumulated in @*totpayload. No initialization of this argument here.
- *
+ * Reclaims n TX descriptors and frees the buffers associated with them.
*/
-static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *Q,
- unsigned int credits_pend, unsigned int *totpayload)
+static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n)
{
+ struct cmdQ_ce *ce;
struct pci_dev *pdev = sge->adapter->pdev;
- struct sk_buff *skb;
- struct cmdQ_ce *ce, *cq = Q->centries;
- unsigned int entries_n = Q->entries_n, cidx = Q->cidx,
- i = credits_pend;
+ unsigned int cidx = q->cidx;
-
- ce = &cq[cidx];
- while (i--) {
- if (ce->single)
+ q->in_use -= n;
+ ce = &q->centries[cidx];
+ while (n--) {
+ if (q->sop)
pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
- pci_unmap_len(ce, dma_len),
+ pci_unmap_len(ce, dma_len),
PCI_DMA_TODEVICE);
else
pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr),
- pci_unmap_len(ce, dma_len),
+ pci_unmap_len(ce, dma_len),
PCI_DMA_TODEVICE);
- if (totpayload)
- *totpayload += pci_unmap_len(ce, dma_len);
-
- skb = ce->skb;
- if (skb)
- dev_kfree_skb_irq(skb);
-
+ q->sop = 0;
+ if (ce->skb) {
+ dev_kfree_skb(ce->skb);
+ q->sop = 1;
+ }
ce++;
- if (++cidx == entries_n) {
+ if (++cidx == q->size) {
cidx = 0;
- ce = cq;
+ ce = q->centries;
}
}
-
- Q->cidx = cidx;
- atomic_add(credits_pend, &Q->credits);
+ q->cidx = cidx;
}
/*
@@ -512,20 +423,17 @@
unsigned int size, i;
for (i = 0; i < SGE_CMDQ_N; i++) {
- struct cmdQ *Q = &sge->cmdQ[i];
+ struct cmdQ *q = &sge->cmdQ[i];
- if (Q->centries) {
- unsigned int pending = Q->entries_n -
- atomic_read(&Q->credits);
-
- if (pending)
- free_cmdQ_buffers(sge, Q, pending, NULL);
- kfree(Q->centries);
+ if (q->centries) {
+ if (q->in_use)
+ free_cmdQ_buffers(sge, q, q->in_use);
+ kfree(q->centries);
}
- if (Q->entries) {
- size = sizeof(struct cmdQ_e) * Q->entries_n;
- pci_free_consistent(pdev, size, Q->entries,
- Q->dma_addr);
+ if (q->entries) {
+ size = sizeof(struct cmdQ_e) * q->size;
+ pci_free_consistent(pdev, size, q->entries,
+ q->dma_addr);
}
}
}
@@ -539,25 +447,38 @@
unsigned int size, i;
for (i = 0; i < SGE_CMDQ_N; i++) {
- struct cmdQ *Q = &sge->cmdQ[i];
+ struct cmdQ *q = &sge->cmdQ[i];
- Q->genbit = 1;
- Q->entries_n = p->cmdQ_size[i];
- atomic_set(&Q->credits, Q->entries_n);
- atomic_set(&Q->asleep, 1);
- spin_lock_init(&Q->Qlock);
- size = sizeof(struct cmdQ_e) * Q->entries_n;
- Q->entries = (struct cmdQ_e *)
- pci_alloc_consistent(pdev, size, &Q->dma_addr);
- if (!Q->entries)
+ q->genbit = 1;
+ q->sop = 1;
+ q->size = p->cmdQ_size[i];
+ q->in_use = 0;
+ q->status = 0;
+ q->processed = q->cleaned = 0;
+ q->stop_thres = 0;
+ spin_lock_init(&q->lock);
+ size = sizeof(struct cmdQ_e) * q->size;
+ q->entries = (struct cmdQ_e *)
+ pci_alloc_consistent(pdev, size, &q->dma_addr);
+ if (!q->entries)
goto err_no_mem;
- memset(Q->entries, 0, size);
- Q->centries = kcalloc(Q->entries_n, sizeof(struct cmdQ_ce),
- GFP_KERNEL);
- if (!Q->centries)
+ memset(q->entries, 0, size);
+ size = sizeof(struct cmdQ_ce) * q->size;
+ q->centries = kmalloc(size, GFP_KERNEL);
+ if (!q->centries)
goto err_no_mem;
+ memset(q->centries, 0, size);
}
+ /*
+ * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE
+ * only. For queue 0 set the stop threshold so we can handle one more
+ * packet from each port, plus reserve an additional 24 entries for
+ * Ethernet packets only. Queue 1 never suspends nor do we reserve
+ * space for Ethernet packets.
+ */
+ sge->cmdQ[0].stop_thres = sge->adapter->params.nports *
+ (MAX_SKB_FRAGS + 1);
return 0;
err_no_mem:
@@ -569,9 +490,9 @@
u32 size, int base_reg_lo,
int base_reg_hi, int size_reg)
{
- t1_write_reg_4(adapter, base_reg_lo, (u32)addr);
- t1_write_reg_4(adapter, base_reg_hi, addr >> 32);
- t1_write_reg_4(adapter, size_reg, size);
+ writel((u32)addr, adapter->regs + base_reg_lo);
+ writel(addr >> 32, adapter->regs + base_reg_hi);
+ writel(size, adapter->regs + size_reg);
}
/*
@@ -585,97 +506,52 @@
if (on_off)
sge->sge_control |= F_VLAN_XTRACT;
if (adapter->open_device_map) {
- t1_write_reg_4(adapter, A_SG_CONTROL, sge->sge_control);
- t1_read_reg_4(adapter, A_SG_CONTROL); /* flush */
+ writel(sge->sge_control, adapter->regs + A_SG_CONTROL);
+ readl(adapter->regs + A_SG_CONTROL); /* flush */
}
}
/*
- * Sets the interrupt latency timer when the adaptive Rx coalescing
- * is turned off. Do nothing when it is turned on again.
- *
- * This routine relies on the fact that the caller has already set
- * the adaptive policy in adapter->sge_params before calling it.
-*/
-int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p)
-{
- if (!p->coalesce_enable) {
- u32 newTimer = p->rx_coalesce_usecs *
- (board_info(sge->adapter)->clock_core / 1000000);
-
- t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, newTimer);
- }
- return 0;
-}
-
-/*
* Programs the various SGE registers. However, the engine is not yet enabled,
* but sge->sge_control is setup and ready to go.
*/
static void configure_sge(struct sge *sge, struct sge_params *p)
{
struct adapter *ap = sge->adapter;
- int i;
-
- t1_write_reg_4(ap, A_SG_CONTROL, 0);
- setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].entries_n,
+
+ writel(0, ap->regs + A_SG_CONTROL);
+ setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size,
A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE);
- setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].entries_n,
+ setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size,
A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE);
setup_ring_params(ap, sge->freelQ[0].dma_addr,
- sge->freelQ[0].entries_n, A_SG_FL0BASELWR,
+ sge->freelQ[0].size, A_SG_FL0BASELWR,
A_SG_FL0BASEUPR, A_SG_FL0SIZE);
setup_ring_params(ap, sge->freelQ[1].dma_addr,
- sge->freelQ[1].entries_n, A_SG_FL1BASELWR,
+ sge->freelQ[1].size, A_SG_FL1BASELWR,
A_SG_FL1BASEUPR, A_SG_FL1SIZE);
/* The threshold comparison uses <. */
- t1_write_reg_4(ap, A_SG_FLTHRESHOLD, SGE_RX_SM_BUF_SIZE + 1);
+ writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD);
- setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.entries_n,
- A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE);
- t1_write_reg_4(ap, A_SG_RSPQUEUECREDIT, (u32)sge->respQ.entries_n);
+ setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size,
+ A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE);
+ writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT);
sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE |
F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE |
V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE |
+ F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS |
V_RX_PKT_OFFSET(sge->rx_pkt_pad);
#if defined(__BIG_ENDIAN_BITFIELD)
sge->sge_control |= F_ENABLE_BIG_ENDIAN;
#endif
- /*
- * Initialize the SGE Interrupt Timer arrray:
- * intrtimer[0] = (SGE_INTRTIMER0) usec
- * intrtimer[0<i<5] = (SGE_INTRTIMER0 + i*2) usec
- * intrtimer[4<i<10] = ((i - 3) * 6) usec
- * intrtimer[10] = (SGE_INTRTIMER1) usec
- *
- */
- sge->intrtimer[0] = board_info(sge->adapter)->clock_core / 1000000;
- for (i = 1; i < SGE_INTR_LATBUCKETS; ++i) {
- sge->intrtimer[i] = SGE_INTRTIMER0 + (2 * i);
- sge->intrtimer[i] *= sge->intrtimer[0];
- }
- for (i = SGE_INTR_LATBUCKETS; i < SGE_INTR_MAXBUCKETS - 1; ++i) {
- sge->intrtimer[i] = (i - 3) * 6;
- sge->intrtimer[i] *= sge->intrtimer[0];
- }
- sge->intrtimer[SGE_INTR_MAXBUCKETS - 1] =
- sge->intrtimer[0] * SGE_INTRTIMER1;
- /* Initialize resource timer */
- sge->intrtimer_nres = sge->intrtimer[0] * SGE_INTRTIMER_NRES;
- /* Finally finish initialization of intrtimer[0] */
- sge->intrtimer[0] *= SGE_INTRTIMER0;
- /* Initialize for a throughput oriented workload */
- sge->currIndex = SGE_INTR_MAXBUCKETS - 1;
+ /* Initialize no-resource timer */
+ sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap);
- if (p->coalesce_enable)
- t1_write_reg_4(ap, A_SG_INTRTIMER,
- sge->intrtimer[sge->currIndex]);
- else
- t1_sge_set_coalesce_params(sge, p);
+ t1_sge_set_coalesce_params(sge, p);
}
/*
@@ -684,7 +560,998 @@
static inline unsigned int jumbo_payload_capacity(const struct sge *sge)
{
return sge->freelQ[sge->jumbo_fl].rx_buffer_size -
- sizeof(struct cpl_rx_data) - SGE_RX_OFFSET + sge->rx_pkt_pad;
+ sge->freelQ[sge->jumbo_fl].dma_offset -
+ sizeof(struct cpl_rx_data);
+}
+
+/*
+ * Frees all SGE related resources and the sge structure itself
+ */
+void t1_sge_destroy(struct sge *sge)
+{
+ if (sge->espibug_skb)
+ kfree_skb(sge->espibug_skb);
+
+ free_tx_resources(sge);
+ free_rx_resources(sge);
+ kfree(sge);
+}
+
+/*
+ * Allocates new RX buffers on the freelist Q (and tracks them on the freelist
+ * context Q) until the Q is full or alloc_skb fails.
+ *
+ * It is possible that the generation bits already match, indicating that the
+ * buffer is already valid and nothing needs to be done. This happens when we
+ * copied a received buffer into a new sk_buff during the interrupt processing.
+ *
+ * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad),
+ * we specify a RX_OFFSET in order to make sure that the IP header is 4B
+ * aligned.
+ */
+static void refill_free_list(struct sge *sge, struct freelQ *q)
+{
+ struct pci_dev *pdev = sge->adapter->pdev;
+ struct freelQ_ce *ce = &q->centries[q->pidx];
+ struct freelQ_e *e = &q->entries[q->pidx];
+ unsigned int dma_len = q->rx_buffer_size - q->dma_offset;
+
+
+ while (q->credits < q->size) {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+
+ skb = alloc_skb(q->rx_buffer_size, GFP_ATOMIC);
+ if (!skb)
+ break;
+
+ skb_reserve(skb, q->dma_offset);
+ mapping = pci_map_single(pdev, skb->data, dma_len,
+ PCI_DMA_FROMDEVICE);
+ ce->skb = skb;
+ pci_unmap_addr_set(ce, dma_addr, mapping);
+ pci_unmap_len_set(ce, dma_len, dma_len);
+ e->addr_lo = (u32)mapping;
+ e->addr_hi = (u64)mapping >> 32;
+ e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit);
+ wmb();
+ e->gen2 = V_CMD_GEN2(q->genbit);
+
+ e++;
+ ce++;
+ if (++q->pidx == q->size) {
+ q->pidx = 0;
+ q->genbit ^= 1;
+ ce = q->centries;
+ e = q->entries;
+ }
+ q->credits++;
+ }
+
+}
+
+/*
+ * Calls refill_free_list for both free lists. If we cannot fill at least 1/4
+ * of both rings, we go into 'few interrupt mode' in order to give the system
+ * time to free up resources.
+ */
+static void freelQs_empty(struct sge *sge)
+{
+ struct adapter *adapter = sge->adapter;
+ u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE);
+ u32 irqholdoff_reg;
+
+ refill_free_list(sge, &sge->freelQ[0]);
+ refill_free_list(sge, &sge->freelQ[1]);
+
+ if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) &&
+ sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) {
+ irq_reg |= F_FL_EXHAUSTED;
+ irqholdoff_reg = sge->fixed_intrtimer;
+ } else {
+ /* Clear the F_FL_EXHAUSTED interrupts for now */
+ irq_reg &= ~F_FL_EXHAUSTED;
+ irqholdoff_reg = sge->intrtimer_nres;
+ }
+ writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER);
+ writel(irq_reg, adapter->regs + A_SG_INT_ENABLE);
+
+ /* We reenable the Qs to force a freelist GTS interrupt later */
+ doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE);
+}
+
+#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA)
+#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
+#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \
+ F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
+
+/*
+ * Disable SGE Interrupts
+ */
+void t1_sge_intr_disable(struct sge *sge)
+{
+ u32 val = readl(sge->adapter->regs + A_PL_ENABLE);
+
+ writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE);
+ writel(0, sge->adapter->regs + A_SG_INT_ENABLE);
+}
+
+/*
+ * Enable SGE interrupts.
+ */
+void t1_sge_intr_enable(struct sge *sge)
+{
+ u32 en = SGE_INT_ENABLE;
+ u32 val = readl(sge->adapter->regs + A_PL_ENABLE);
+
+ if (sge->adapter->flags & TSO_CAPABLE)
+ en &= ~F_PACKET_TOO_BIG;
+ writel(en, sge->adapter->regs + A_SG_INT_ENABLE);
+ writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE);
+}
+
+/*
+ * Clear SGE interrupts.
+ */
+void t1_sge_intr_clear(struct sge *sge)
+{
+ writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE);
+ writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE);
+}
+
+/*
+ * SGE 'Error' interrupt handler
+ */
+int t1_sge_intr_error_handler(struct sge *sge)
+{
+ struct adapter *adapter = sge->adapter;
+ u32 cause = readl(adapter->regs + A_SG_INT_CAUSE);
+
+ if (adapter->flags & TSO_CAPABLE)
+ cause &= ~F_PACKET_TOO_BIG;
+ if (cause & F_RESPQ_EXHAUSTED)
+ sge->stats.respQ_empty++;
+ if (cause & F_RESPQ_OVERFLOW) {
+ sge->stats.respQ_overflow++;
+ CH_ALERT("%s: SGE response queue overflow\n",
+ adapter->name);
+ }
+ if (cause & F_FL_EXHAUSTED) {
+ sge->stats.freelistQ_empty++;
+ freelQs_empty(sge);
+ }
+ if (cause & F_PACKET_TOO_BIG) {
+ sge->stats.pkt_too_big++;
+ CH_ALERT("%s: SGE max packet size exceeded\n",
+ adapter->name);
+ }
+ if (cause & F_PACKET_MISMATCH) {
+ sge->stats.pkt_mismatch++;
+ CH_ALERT("%s: SGE packet mismatch\n", adapter->name);
+ }
+ if (cause & SGE_INT_FATAL)
+ t1_fatal_err(adapter);
+
+ writel(cause, adapter->regs + A_SG_INT_CAUSE);
+ return 0;
+}
+
+const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge)
+{
+ return &sge->stats;
+}
+
+const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port)
+{
+ return &sge->port_stats[port];
+}
+
+/**
+ * recycle_fl_buf - recycle a free list buffer
+ * @fl: the free list
+ * @idx: index of buffer to recycle
+ *
+ * Recycles the specified buffer on the given free list by adding it at
+ * the next available slot on the list.
+ */
+static void recycle_fl_buf(struct freelQ *fl, int idx)
+{
+ struct freelQ_e *from = &fl->entries[idx];
+ struct freelQ_e *to = &fl->entries[fl->pidx];
+
+ fl->centries[fl->pidx] = fl->centries[idx];
+ to->addr_lo = from->addr_lo;
+ to->addr_hi = from->addr_hi;
+ to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit);
+ wmb();
+ to->gen2 = V_CMD_GEN2(fl->genbit);
+ fl->credits++;
+
+ if (++fl->pidx == fl->size) {
+ fl->pidx = 0;
+ fl->genbit ^= 1;
+ }
+}
+
+/**
+ * get_packet - return the next ingress packet buffer
+ * @pdev: the PCI device that received the packet
+ * @fl: the SGE free list holding the packet
+ * @len: the actual packet length, excluding any SGE padding
+ * @dma_pad: padding at beginning of buffer left by SGE DMA
+ * @skb_pad: padding to be used if the packet is copied
+ * @copy_thres: length threshold under which a packet should be copied
+ * @drop_thres: # of remaining buffers before we start dropping packets
+ *
+ * Get the next packet from a free list and complete setup of the
+ * sk_buff. If the packet is small we make a copy and recycle the
+ * original buffer, otherwise we use the original buffer itself. If a
+ * positive drop threshold is supplied packets are dropped and their
+ * buffers recycled if (a) the number of remaining buffers is under the
+ * threshold and the packet is too big to copy, or (b) the packet should
+ * be copied but there is no memory for the copy.
+ */
+static inline struct sk_buff *get_packet(struct pci_dev *pdev,
+ struct freelQ *fl, unsigned int len,
+ int dma_pad, int skb_pad,
+ unsigned int copy_thres,
+ unsigned int drop_thres)
+{
+ struct sk_buff *skb;
+ struct freelQ_ce *ce = &fl->centries[fl->cidx];
+
+ if (len < copy_thres) {
+ skb = alloc_skb(len + skb_pad, GFP_ATOMIC);
+ if (likely(skb != NULL)) {
+ skb_reserve(skb, skb_pad);
+ skb_put(skb, len);
+ pci_dma_sync_single_for_cpu(pdev,
+ pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_FROMDEVICE);
+ memcpy(skb->data, ce->skb->data + dma_pad, len);
+ pci_dma_sync_single_for_device(pdev,
+ pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_FROMDEVICE);
+ } else if (!drop_thres)
+ goto use_orig_buf;
+
+ recycle_fl_buf(fl, fl->cidx);
+ return skb;
+ }
+
+ if (fl->credits < drop_thres) {
+ recycle_fl_buf(fl, fl->cidx);
+ return NULL;
+ }
+
+use_orig_buf:
+ pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE);
+ skb = ce->skb;
+ skb_reserve(skb, dma_pad);
+ skb_put(skb, len);
+ return skb;
+}
+
+/**
+ * unexpected_offload - handle an unexpected offload packet
+ * @adapter: the adapter
+ * @fl: the free list that received the packet
+ *
+ * Called when we receive an unexpected offload packet (e.g., the TOE
+ * function is disabled or the card is a NIC). Prints a message and
+ * recycles the buffer.
+ */
+static void unexpected_offload(struct adapter *adapter, struct freelQ *fl)
+{
+ struct freelQ_ce *ce = &fl->centries[fl->cidx];
+ struct sk_buff *skb = ce->skb;
+
+ pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE);
+ CH_ERR("%s: unexpected offload packet, cmd %u\n",
+ adapter->name, *skb->data);
+ recycle_fl_buf(fl, fl->cidx);
+}
+
+/*
+ * Write the command descriptors to transmit the given skb starting at
+ * descriptor pidx with the given generation.
+ */
+static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb,
+ unsigned int pidx, unsigned int gen,
+ struct cmdQ *q)
+{
+ dma_addr_t mapping;
+ struct cmdQ_e *e, *e1;
+ struct cmdQ_ce *ce;
+ unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags;
+
+ mapping = pci_map_single(adapter->pdev, skb->data,
+ skb->len - skb->data_len, PCI_DMA_TODEVICE);
+ ce = &q->centries[pidx];
+ ce->skb = NULL;
+ pci_unmap_addr_set(ce, dma_addr, mapping);
+ pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len);
+
+ flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) |
+ V_CMD_GEN2(gen);
+ e = &q->entries[pidx];
+ e->addr_lo = (u32)mapping;
+ e->addr_hi = (u64)mapping >> 32;
+ e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen);
+ for (e1 = e, i = 0; nfrags--; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ ce++;
+ e1++;
+ if (++pidx == q->size) {
+ pidx = 0;
+ gen ^= 1;
+ ce = q->centries;
+ e1 = q->entries;
+ }
+
+ mapping = pci_map_page(adapter->pdev, frag->page,
+ frag->page_offset, frag->size,
+ PCI_DMA_TODEVICE);
+ ce->skb = NULL;
+ pci_unmap_addr_set(ce, dma_addr, mapping);
+ pci_unmap_len_set(ce, dma_len, frag->size);
+
+ e1->addr_lo = (u32)mapping;
+ e1->addr_hi = (u64)mapping >> 32;
+ e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen);
+ e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) |
+ V_CMD_GEN2(gen);
+ }
+
+ ce->skb = skb;
+ wmb();
+ e->flags = flags;
+}
+
+/*
+ * Clean up completed Tx buffers.
+ */
+static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q)
+{
+ unsigned int reclaim = q->processed - q->cleaned;
+
+ if (reclaim) {
+ free_cmdQ_buffers(sge, q, reclaim);
+ q->cleaned += reclaim;
+ }
+}
+
+#ifndef SET_ETHTOOL_OPS
+# define __netif_rx_complete(dev) netif_rx_complete(dev)
+#endif
+
+/*
+ * We cannot use the standard netif_rx_schedule_prep() because we have multiple
+ * ports plus the TOE all multiplexing onto a single response queue, therefore
+ * accepting new responses cannot depend on the state of any particular port.
+ * So define our own equivalent that omits the netif_running() test.
+ */
+static inline int napi_schedule_prep(struct net_device *dev)
+{
+ return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+
+/**
+ * sge_rx - process an ingress ethernet packet
+ * @sge: the sge structure
+ * @fl: the free list that contains the packet buffer
+ * @len: the packet length
+ *
+ * Process an ingress ethernet pakcet and deliver it to the stack.
+ */
+static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
+{
+ struct sk_buff *skb;
+ struct cpl_rx_pkt *p;
+ struct adapter *adapter = sge->adapter;
+
+ sge->stats.ethernet_pkts++;
+ skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad,
+ sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES,
+ SGE_RX_DROP_THRES);
+ if (!skb) {
+ sge->port_stats[0].rx_drops++; /* charge only port 0 for now */
+ return 0;
+ }
+
+ p = (struct cpl_rx_pkt *)skb->data;
+ skb_pull(skb, sizeof(*p));
+ skb->dev = adapter->port[p->iff].dev;
+ skb->dev->last_rx = jiffies;
+ skb->protocol = eth_type_trans(skb, skb->dev);
+ if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff &&
+ skb->protocol == htons(ETH_P_IP) &&
+ (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) {
+ sge->port_stats[p->iff].rx_cso_good++;
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ if (unlikely(adapter->vlan_grp && p->vlan_valid)) {
+ sge->port_stats[p->iff].vlan_xtract++;
+ if (adapter->params.sge.polling)
+ vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
+ ntohs(p->vlan));
+ else
+ vlan_hwaccel_rx(skb, adapter->vlan_grp,
+ ntohs(p->vlan));
+ } else if (adapter->params.sge.polling)
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
+ return 0;
+}
+
+/*
+ * Returns true if a command queue has enough available descriptors that
+ * we can resume Tx operation after temporarily disabling its packet queue.
+ */
+static inline int enough_free_Tx_descs(const struct cmdQ *q)
+{
+ unsigned int r = q->processed - q->cleaned;
+
+ return q->in_use - r < (q->size >> 1);
+}
+
+/*
+ * Called when sufficient space has become available in the SGE command queues
+ * after the Tx packet schedulers have been suspended to restart the Tx path.
+ */
+static void restart_tx_queues(struct sge *sge)
+{
+ struct adapter *adap = sge->adapter;
+
+ if (enough_free_Tx_descs(&sge->cmdQ[0])) {
+ int i;
+
+ for_each_port(adap, i) {
+ struct net_device *nd = adap->port[i].dev;
+
+ if (test_and_clear_bit(nd->if_port,
+ &sge->stopped_tx_queues) &&
+ netif_running(nd)) {
+ sge->stats.cmdQ_restarted[3]++;
+ netif_wake_queue(nd);
+ }
+ }
+ }
+}
+
+/*
+ * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0
+ * information.
+ */
+static unsigned int update_tx_info(struct adapter *adapter,
+ unsigned int flags,
+ unsigned int pr0)
+{
+ struct sge *sge = adapter->sge;
+ struct cmdQ *cmdq = &sge->cmdQ[0];
+
+ cmdq->processed += pr0;
+
+ if (flags & F_CMDQ0_ENABLE) {
+ clear_bit(CMDQ_STAT_RUNNING, &cmdq->status);
+
+ if (cmdq->cleaned + cmdq->in_use != cmdq->processed &&
+ !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) {
+ set_bit(CMDQ_STAT_RUNNING, &cmdq->status);
+ writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
+ }
+ flags &= ~F_CMDQ0_ENABLE;
+ }
+
+ if (unlikely(sge->stopped_tx_queues != 0))
+ restart_tx_queues(sge);
+
+ return flags;
+}
+
+/*
+ * Process SGE responses, up to the supplied budget. Returns the number of
+ * responses processed. A negative budget is effectively unlimited.
+ */
+static int process_responses(struct adapter *adapter, int budget)
+{
+ struct sge *sge = adapter->sge;
+ struct respQ *q = &sge->respQ;
+ struct respQ_e *e = &q->entries[q->cidx];
+ int budget_left = budget;
+ unsigned int flags = 0;
+ unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0};
+
+
+ while (likely(budget_left && e->GenerationBit == q->genbit)) {
+ flags |= e->Qsleeping;
+
+ cmdq_processed[0] += e->Cmdq0CreditReturn;
+ cmdq_processed[1] += e->Cmdq1CreditReturn;
+
+ /* We batch updates to the TX side to avoid cacheline
+ * ping-pong of TX state information on MP where the sender
+ * might run on a different CPU than this function...
+ */
+ if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) {
+ flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+ cmdq_processed[0] = 0;
+ }
+ if (unlikely(cmdq_processed[1] > 16)) {
+ sge->cmdQ[1].processed += cmdq_processed[1];
+ cmdq_processed[1] = 0;
+ }
+ if (likely(e->DataValid)) {
+ struct freelQ *fl = &sge->freelQ[e->FreelistQid];
+
+ if (unlikely(!e->Sop || !e->Eop))
+ BUG();
+ if (unlikely(e->Offload))
+ unexpected_offload(adapter, fl);
+ else
+ sge_rx(sge, fl, e->BufferLength);
+
+ /*
+ * Note: this depends on each packet consuming a
+ * single free-list buffer; cf. the BUG above.
+ */
+ if (++fl->cidx == fl->size)
+ fl->cidx = 0;
+ if (unlikely(--fl->credits <
+ fl->size - SGE_FREEL_REFILL_THRESH))
+ refill_free_list(sge, fl);
+ } else
+ sge->stats.pure_rsps++;
+
+ e++;
+ if (unlikely(++q->cidx == q->size)) {
+ q->cidx = 0;
+ q->genbit ^= 1;
+ e = q->entries;
+ }
+ prefetch(e);
+
+ if (++q->credits > SGE_RESPQ_REPLENISH_THRES) {
+ writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT);
+ q->credits = 0;
+ }
+ --budget_left;
+ }
+
+ flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+ sge->cmdQ[1].processed += cmdq_processed[1];
+
+ budget -= budget_left;
+ return budget;
+}
+
+/*
+ * A simpler version of process_responses() that handles only pure (i.e.,
+ * non data-carrying) responses. Such respones are too light-weight to justify
+ * calling a softirq when using NAPI, so we handle them specially in hard
+ * interrupt context. The function is called with a pointer to a response,
+ * which the caller must ensure is a valid pure response. Returns 1 if it
+ * encounters a valid data-carrying response, 0 otherwise.
+ */
+static int process_pure_responses(struct adapter *adapter, struct respQ_e *e)
+{
+ struct sge *sge = adapter->sge;
+ struct respQ *q = &sge->respQ;
+ unsigned int flags = 0;
+ unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0};
+
+ do {
+ flags |= e->Qsleeping;
+
+ cmdq_processed[0] += e->Cmdq0CreditReturn;
+ cmdq_processed[1] += e->Cmdq1CreditReturn;
+
+ e++;
+ if (unlikely(++q->cidx == q->size)) {
+ q->cidx = 0;
+ q->genbit ^= 1;
+ e = q->entries;
+ }
+ prefetch(e);
+
+ if (++q->credits > SGE_RESPQ_REPLENISH_THRES) {
+ writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT);
+ q->credits = 0;
+ }
+ sge->stats.pure_rsps++;
+ } while (e->GenerationBit == q->genbit && !e->DataValid);
+
+ flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+ sge->cmdQ[1].processed += cmdq_processed[1];
+
+ return e->GenerationBit == q->genbit;
+}
+
+/*
+ * Handler for new data events when using NAPI. This does not need any locking
+ * or protection from interrupts as data interrupts are off at this point and
+ * other adapter interrupts do not interfere.
+ */
+static int t1_poll(struct net_device *dev, int *budget)
+{
+ struct adapter *adapter = dev->priv;
+ int effective_budget = min(*budget, dev->quota);
+
+ int work_done = process_responses(adapter, effective_budget);
+ *budget -= work_done;
+ dev->quota -= work_done;
+
+ if (work_done >= effective_budget)
+ return 1;
+
+ __netif_rx_complete(dev);
+
+ /*
+ * Because we don't atomically flush the following write it is
+ * possible that in very rare cases it can reach the device in a way
+ * that races with a new response being written plus an error interrupt
+ * causing the NAPI interrupt handler below to return unhandled status
+ * to the OS. To protect against this would require flushing the write
+ * and doing both the write and the flush with interrupts off. Way too
+ * expensive and unjustifiable given the rarity of the race.
+ */
+ writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
+ return 0;
+}
+
+/*
+ * Returns true if the device is already scheduled for polling.
+ */
+static inline int napi_is_scheduled(struct net_device *dev)
+{
+ return test_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+/*
+ * NAPI version of the main interrupt handler.
+ */
+static irqreturn_t t1_interrupt_napi(int irq, void *data, struct pt_regs *regs)
+{
+ int handled;
+ struct adapter *adapter = data;
+ struct sge *sge = adapter->sge;
+ struct respQ *q = &adapter->sge->respQ;
+
+ /*
+ * Clear the SGE_DATA interrupt first thing. Normally the NAPI
+ * handler has control of the response queue and the interrupt handler
+ * can look at the queue reliably only once it knows NAPI is off.
+ * We can't wait that long to clear the SGE_DATA interrupt because we
+ * could race with t1_poll rearming the SGE interrupt, so we need to
+ * clear the interrupt speculatively and really early on.
+ */
+ writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+ spin_lock(&adapter->async_lock);
+ if (!napi_is_scheduled(sge->netdev)) {
+ struct respQ_e *e = &q->entries[q->cidx];
+
+ if (e->GenerationBit == q->genbit) {
+ if (e->DataValid ||
+ process_pure_responses(adapter, e)) {
+ if (likely(napi_schedule_prep(sge->netdev)))
+ __netif_rx_schedule(sge->netdev);
+ else
+ printk(KERN_CRIT
+ "NAPI schedule failure!\n");
+ } else
+ writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+ handled = 1;
+ goto unlock;
+ } else
+ writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+ } else
+ if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA)
+ printk(KERN_ERR "data interrupt while NAPI running\n");
+
+ handled = t1_slow_intr_handler(adapter);
+ if (!handled)
+ sge->stats.unhandled_irqs++;
+ unlock:
+ spin_unlock(&adapter->async_lock);
+ return IRQ_RETVAL(handled != 0);
+}
+
+/*
+ * Main interrupt handler, optimized assuming that we took a 'DATA'
+ * interrupt.
+ *
+ * 1. Clear the interrupt
+ * 2. Loop while we find valid descriptors and process them; accumulate
+ * information that can be processed after the loop
+ * 3. Tell the SGE at which index we stopped processing descriptors
+ * 4. Bookkeeping; free TX buffers, ring doorbell if there are any
+ * outstanding TX buffers waiting, replenish RX buffers, potentially
+ * reenable upper layers if they were turned off due to lack of TX
+ * resources which are available again.
+ * 5. If we took an interrupt, but no valid respQ descriptors was found we
+ * let the slow_intr_handler run and do error handling.
+ */
+static irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs)
+{
+ int work_done;
+ struct respQ_e *e;
+ struct adapter *adapter = cookie;
+ struct respQ *Q = &adapter->sge->respQ;
+
+ spin_lock(&adapter->async_lock);
+ e = &Q->entries[Q->cidx];
+ prefetch(e);
+
+ writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+ if (likely(e->GenerationBit == Q->genbit))
+ work_done = process_responses(adapter, -1);
+ else
+ work_done = t1_slow_intr_handler(adapter);
+
+ /*
+ * The unconditional clearing of the PL_CAUSE above may have raced
+ * with DMA completion and the corresponding generation of a response
+ * to cause us to miss the resulting data interrupt. The next write
+ * is also unconditional to recover the missed interrupt and render
+ * this race harmless.
+ */
+ writel(Q->cidx, adapter->regs + A_SG_SLEEPING);
+
+ if (!work_done)
+ adapter->sge->stats.unhandled_irqs++;
+ spin_unlock(&adapter->async_lock);
+ return IRQ_RETVAL(work_done != 0);
+}
+
+intr_handler_t t1_select_intr_handler(adapter_t *adapter)
+{
+ return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt;
+}
+
+/*
+ * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
+ *
+ * The code figures out how many entries the sk_buff will require in the
+ * cmdQ and updates the cmdQ data structure with the state once the enqueue
+ * has complete. Then, it doesn't access the global structure anymore, but
+ * uses the corresponding fields on the stack. In conjuction with a spinlock
+ * around that code, we can make the function reentrant without holding the
+ * lock when we actually enqueue (which might be expensive, especially on
+ * architectures with IO MMUs).
+ *
+ * This runs with softirqs disabled.
+ */
+unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
+ unsigned int qid, struct net_device *dev)
+{
+ struct sge *sge = adapter->sge;
+ struct cmdQ *q = &sge->cmdQ[qid];
+ unsigned int credits, pidx, genbit, count;
+
+ spin_lock(&q->lock);
+ reclaim_completed_tx(sge, q);
+
+ pidx = q->pidx;
+ credits = q->size - q->in_use;
+ count = 1 + skb_shinfo(skb)->nr_frags;
+
+ { /* Ethernet packet */
+ if (unlikely(credits < count)) {
+ netif_stop_queue(dev);
+ set_bit(dev->if_port, &sge->stopped_tx_queues);
+ sge->stats.cmdQ_full[3]++;
+ spin_unlock(&q->lock);
+ CH_ERR("%s: Tx ring full while queue awake!\n",
+ adapter->name);
+ return 1;
+ }
+ if (unlikely(credits - count < q->stop_thres)) {
+ sge->stats.cmdQ_full[3]++;
+ netif_stop_queue(dev);
+ set_bit(dev->if_port, &sge->stopped_tx_queues);
+ }
+ }
+ q->in_use += count;
+ genbit = q->genbit;
+ q->pidx += count;
+ if (q->pidx >= q->size) {
+ q->pidx -= q->size;
+ q->genbit ^= 1;
+ }
+ spin_unlock(&q->lock);
+
+ write_tx_descs(adapter, skb, pidx, genbit, q);
+
+ /*
+ * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring
+ * the doorbell if the Q is asleep. There is a natural race, where
+ * the hardware is going to sleep just after we checked, however,
+ * then the interrupt handler will detect the outstanding TX packet
+ * and ring the doorbell for us.
+ */
+ if (qid)
+ doorbell_pio(adapter, F_CMDQ1_ENABLE);
+ else {
+ clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+ if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) {
+ set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+ writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
+ }
+ }
+ return 0;
+}
+
+#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14))
+
+/*
+ * eth_hdr_len - return the length of an Ethernet header
+ * @data: pointer to the start of the Ethernet header
+ *
+ * Returns the length of an Ethernet header, including optional VLAN tag.
+ */
+static inline int eth_hdr_len(const void *data)
+{
+ const struct ethhdr *e = data;
+
+ return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN;
+}
+
+/*
+ * Adds the CPL header to the sk_buff and passes it to t1_sge_tx.
+ */
+int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port];
+ struct sge *sge = adapter->sge;
+ struct cpl_tx_pkt *cpl;
+
+#ifdef NETIF_F_TSO
+ if (skb_shinfo(skb)->tso_size) {
+ int eth_type;
+ struct cpl_tx_pkt_lso *hdr;
+
+ st->tso++;
+
+ eth_type = skb->nh.raw - skb->data == ETH_HLEN ?
+ CPL_ETH_II : CPL_ETH_II_VLAN;
+
+ hdr = (struct cpl_tx_pkt_lso *)skb_push(skb, sizeof(*hdr));
+ hdr->opcode = CPL_TX_PKT_LSO;
+ hdr->ip_csum_dis = hdr->l4_csum_dis = 0;
+ hdr->ip_hdr_words = skb->nh.iph->ihl;
+ hdr->tcp_hdr_words = skb->h.th->doff;
+ hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type,
+ skb_shinfo(skb)->tso_size));
+ hdr->len = htonl(skb->len - sizeof(*hdr));
+ cpl = (struct cpl_tx_pkt *)hdr;
+ sge->stats.tx_lso_pkts++;
+ } else
+#endif
+ {
+ /*
+ * Packets shorter than ETH_HLEN can break the MAC, drop them
+ * early. Also, we may get oversized packets because some
+ * parts of the kernel don't handle our unusual hard_header_len
+ * right, drop those too.
+ */
+ if (unlikely(skb->len < ETH_HLEN ||
+ skb->len > dev->mtu + eth_hdr_len(skb->data))) {
+ dev_kfree_skb_any(skb);
+ return NET_XMIT_SUCCESS;
+ }
+
+ /*
+ * We are using a non-standard hard_header_len and some kernel
+ * components, such as pktgen, do not handle it right.
+ * Complain when this happens but try to fix things up.
+ */
+ if (unlikely(skb_headroom(skb) <
+ dev->hard_header_len - ETH_HLEN)) {
+ struct sk_buff *orig_skb = skb;
+
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: inadequate headroom in "
+ "Tx packet\n", dev->name);
+ skb = skb_realloc_headroom(skb, sizeof(*cpl));
+ dev_kfree_skb_any(orig_skb);
+ if (!skb)
+ return -ENOMEM;
+ }
+
+ if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
+ skb->ip_summed == CHECKSUM_HW &&
+ skb->nh.iph->protocol == IPPROTO_UDP)
+ if (unlikely(skb_checksum_help(skb, 0))) {
+ dev_kfree_skb_any(skb);
+ return -ENOMEM;
+ }
+
+ /* Hmmm, assuming to catch the gratious arp... and we'll use
+ * it to flush out stuck espi packets...
+ */
+ if (unlikely(!adapter->sge->espibug_skb)) {
+ if (skb->protocol == htons(ETH_P_ARP) &&
+ skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) {
+ adapter->sge->espibug_skb = skb;
+ /* We want to re-use this skb later. We
+ * simply bump the reference count and it
+ * will not be freed...
+ */
+ skb = skb_get(skb);
+ }
+ }
+
+ cpl = (struct cpl_tx_pkt *)__skb_push(skb, sizeof(*cpl));
+ cpl->opcode = CPL_TX_PKT;
+ cpl->ip_csum_dis = 1; /* SW calculates IP csum */
+ cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1;
+ /* the length field isn't used so don't bother setting it */
+
+ st->tx_cso += (skb->ip_summed == CHECKSUM_HW);
+ sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_HW);
+ sge->stats.tx_reg_pkts++;
+ }
+ cpl->iff = dev->if_port;
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+ if (adapter->vlan_grp && vlan_tx_tag_present(skb)) {
+ cpl->vlan_valid = 1;
+ cpl->vlan = htons(vlan_tx_tag_get(skb));
+ st->vlan_insert++;
+ } else
+#endif
+ cpl->vlan_valid = 0;
+
+ dev->trans_start = jiffies;
+ return t1_sge_tx(skb, adapter, 0, dev);
+}
+
+/*
+ * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled.
+ */
+static void sge_tx_reclaim_cb(unsigned long data)
+{
+ int i;
+ struct sge *sge = (struct sge *)data;
+
+ for (i = 0; i < SGE_CMDQ_N; ++i) {
+ struct cmdQ *q = &sge->cmdQ[i];
+
+ if (!spin_trylock(&q->lock))
+ continue;
+
+ reclaim_completed_tx(sge, q);
+ if (i == 0 && q->in_use) /* flush pending credits */
+ writel(F_CMDQ0_ENABLE,
+ sge->adapter->regs + A_SG_DOORBELL);
+
+ spin_unlock(&q->lock);
+ }
+ mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
+}
+
+/*
+ * Propagate changes of the SGE coalescing parameters to the HW.
+ */
+int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p)
+{
+ sge->netdev->poll = t1_poll;
+ sge->fixed_intrtimer = p->rx_coalesce_usecs *
+ core_ticks_per_usec(sge->adapter);
+ writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER);
+ return 0;
}
/*
@@ -712,740 +1579,106 @@
}
/*
- * Frees all SGE related resources and the sge structure itself
+ * Disables the DMA engine.
*/
-void t1_sge_destroy(struct sge *sge)
+void t1_sge_stop(struct sge *sge)
{
- if (sge->pskb)
- dev_kfree_skb(sge->pskb);
- free_tx_resources(sge);
- free_rx_resources(sge);
- kfree(sge);
+ writel(0, sge->adapter->regs + A_SG_CONTROL);
+ (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
+ if (is_T2(sge->adapter))
+ del_timer_sync(&sge->espibug_timer);
+ del_timer_sync(&sge->tx_reclaim_timer);
}
/*
- * Allocates new RX buffers on the freelist Q (and tracks them on the freelist
- * context Q) until the Q is full or alloc_skb fails.
- *
- * It is possible that the generation bits already match, indicating that the
- * buffer is already valid and nothing needs to be done. This happens when we
- * copied a received buffer into a new sk_buff during the interrupt processing.
- *
- * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad),
- * we specify a RX_OFFSET in order to make sure that the IP header is 4B
- * aligned.
+ * Enables the DMA engine.
*/
-static void refill_free_list(struct sge *sge, struct freelQ *Q)
+void t1_sge_start(struct sge *sge)
{
- struct pci_dev *pdev = sge->adapter->pdev;
- struct freelQ_ce *ce = &Q->centries[Q->pidx];
- struct freelQ_e *e = &Q->entries[Q->pidx];
- unsigned int dma_len = Q->rx_buffer_size - Q->dma_offset;
-
-
- while (Q->credits < Q->entries_n) {
- if (e->GenerationBit != Q->genbit) {
- struct sk_buff *skb;
- dma_addr_t mapping;
-
- skb = alloc_skb(Q->rx_buffer_size, GFP_ATOMIC);
- if (!skb)
- break;
- if (Q->dma_offset)
- skb_reserve(skb, Q->dma_offset);
- mapping = pci_map_single(pdev, skb->data, dma_len,
- PCI_DMA_FROMDEVICE);
- ce->skb = skb;
- pci_unmap_addr_set(ce, dma_addr, mapping);
- pci_unmap_len_set(ce, dma_len, dma_len);
- e->AddrLow = (u32)mapping;
- e->AddrHigh = (u64)mapping >> 32;
- e->BufferLength = dma_len;
- e->GenerationBit = e->GenerationBit2 = Q->genbit;
- }
-
- e++;
- ce++;
- if (++Q->pidx == Q->entries_n) {
- Q->pidx = 0;
- Q->genbit ^= 1;
- ce = Q->centries;
- e = Q->entries;
- }
- Q->credits++;
- }
-
-}
-
-/*
- * Calls refill_free_list for both freelist Qs. If we cannot
- * fill at least 1/4 of both Qs, we go into 'few interrupt mode' in order
- * to give the system time to free up resources.
- */
-static void freelQs_empty(struct sge *sge)
-{
- u32 irq_reg = t1_read_reg_4(sge->adapter, A_SG_INT_ENABLE);
- u32 irqholdoff_reg;
-
refill_free_list(sge, &sge->freelQ[0]);
refill_free_list(sge, &sge->freelQ[1]);
- if (sge->freelQ[0].credits > (sge->freelQ[0].entries_n >> 2) &&
- sge->freelQ[1].credits > (sge->freelQ[1].entries_n >> 2)) {
- irq_reg |= F_FL_EXHAUSTED;
- irqholdoff_reg = sge->intrtimer[sge->currIndex];
- } else {
- /* Clear the F_FL_EXHAUSTED interrupts for now */
- irq_reg &= ~F_FL_EXHAUSTED;
- irqholdoff_reg = sge->intrtimer_nres;
- }
- t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, irqholdoff_reg);
- t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, irq_reg);
+ writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL);
+ doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE);
+ (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
- /* We reenable the Qs to force a freelist GTS interrupt later */
- doorbell_pio(sge, F_FL0_ENABLE | F_FL1_ENABLE);
-}
+ mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
-#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA)
-#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
-#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \
- F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
-
-/*
- * Disable SGE Interrupts
- */
-void t1_sge_intr_disable(struct sge *sge)
-{
- u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE);
-
- t1_write_reg_4(sge->adapter, A_PL_ENABLE, val & ~SGE_PL_INTR_MASK);
- t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, 0);
+ if (is_T2(sge->adapter))
+ mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout);
}
/*
- * Enable SGE interrupts.
+ * Callback for the T2 ESPI 'stuck packet feature' workaorund
*/
-void t1_sge_intr_enable(struct sge *sge)
+static void espibug_workaround(void *data)
{
- u32 en = SGE_INT_ENABLE;
- u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE);
-
- if (sge->adapter->flags & TSO_CAPABLE)
- en &= ~F_PACKET_TOO_BIG;
- t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, en);
- t1_write_reg_4(sge->adapter, A_PL_ENABLE, val | SGE_PL_INTR_MASK);
-}
-
-/*
- * Clear SGE interrupts.
- */
-void t1_sge_intr_clear(struct sge *sge)
-{
- t1_write_reg_4(sge->adapter, A_PL_CAUSE, SGE_PL_INTR_MASK);
- t1_write_reg_4(sge->adapter, A_SG_INT_CAUSE, 0xffffffff);
-}
-
-/*
- * SGE 'Error' interrupt handler
- */
-int t1_sge_intr_error_handler(struct sge *sge)
-{
- struct adapter *adapter = sge->adapter;
- u32 cause = t1_read_reg_4(adapter, A_SG_INT_CAUSE);
-
- if (adapter->flags & TSO_CAPABLE)
- cause &= ~F_PACKET_TOO_BIG;
- if (cause & F_RESPQ_EXHAUSTED)
- sge->intr_cnt.respQ_empty++;
- if (cause & F_RESPQ_OVERFLOW) {
- sge->intr_cnt.respQ_overflow++;
- CH_ALERT("%s: SGE response queue overflow\n",
- adapter->name);
- }
- if (cause & F_FL_EXHAUSTED) {
- sge->intr_cnt.freelistQ_empty++;
- freelQs_empty(sge);
- }
- if (cause & F_PACKET_TOO_BIG) {
- sge->intr_cnt.pkt_too_big++;
- CH_ALERT("%s: SGE max packet size exceeded\n",
- adapter->name);
- }
- if (cause & F_PACKET_MISMATCH) {
- sge->intr_cnt.pkt_mismatch++;
- CH_ALERT("%s: SGE packet mismatch\n", adapter->name);
- }
- if (cause & SGE_INT_FATAL)
- t1_fatal_err(adapter);
-
- t1_write_reg_4(adapter, A_SG_INT_CAUSE, cause);
- return 0;
-}
-
-/*
- * The following code is copied from 2.6, where the skb_pull is doing the
- * right thing and only pulls ETH_HLEN.
- *
- * Determine the packet's protocol ID. The rule here is that we
- * assume 802.3 if the type field is short enough to be a length.
- * This is normal practice and works for any 'now in use' protocol.
- */
-static unsigned short sge_eth_type_trans(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct ethhdr *eth;
- unsigned char *rawp;
-
- skb->mac.raw = skb->data;
- skb_pull(skb, ETH_HLEN);
- eth = (struct ethhdr *)skb->mac.raw;
-
- if (*eth->h_dest&1) {
- if(memcmp(eth->h_dest, dev->broadcast, ETH_ALEN) == 0)
- skb->pkt_type = PACKET_BROADCAST;
- else
- skb->pkt_type = PACKET_MULTICAST;
- }
-
- /*
- * This ALLMULTI check should be redundant by 1.4
- * so don't forget to remove it.
- *
- * Seems, you forgot to remove it. All silly devices
- * seems to set IFF_PROMISC.
- */
-
- else if (1 /*dev->flags&IFF_PROMISC*/)
- {
- if(memcmp(eth->h_dest,dev->dev_addr, ETH_ALEN))
- skb->pkt_type=PACKET_OTHERHOST;
- }
-
- if (ntohs(eth->h_proto) >= 1536)
- return eth->h_proto;
-
- rawp = skb->data;
-
- /*
- * This is a magic hack to spot IPX packets. Older Novell breaks
- * the protocol design and runs IPX over 802.3 without an 802.2 LLC
- * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
- * won't work for fault tolerant netware but does for the rest.
- */
- if (*(unsigned short *)rawp == 0xFFFF)
- return htons(ETH_P_802_3);
-
- /*
- * Real 802.2 LLC
- */
- return htons(ETH_P_802_2);
-}
-
-/*
- * Prepare the received buffer and pass it up the stack. If it is small enough
- * and allocation doesn't fail, we use a new sk_buff and copy the content.
- */
-static unsigned int t1_sge_rx(struct sge *sge, struct freelQ *Q,
- unsigned int len, unsigned int offload)
-{
- struct sk_buff *skb;
- struct adapter *adapter = sge->adapter;
- struct freelQ_ce *ce = &Q->centries[Q->cidx];
-
- if (len <= SGE_RX_COPY_THRESHOLD &&
- (skb = alloc_skb(len + NET_IP_ALIGN, GFP_ATOMIC))) {
- struct freelQ_e *e;
- char *src = ce->skb->data;
-
- pci_dma_sync_single_for_cpu(adapter->pdev,
- pci_unmap_addr(ce, dma_addr),
- pci_unmap_len(ce, dma_len),
- PCI_DMA_FROMDEVICE);
- if (!offload) {
- skb_reserve(skb, NET_IP_ALIGN);
- src += sge->rx_pkt_pad;
- }
- memcpy(skb->data, src, len);
-
- /* Reuse the entry. */
- e = &Q->entries[Q->cidx];
- e->GenerationBit ^= 1;
- e->GenerationBit2 ^= 1;
- } else {
- pci_unmap_single(adapter->pdev, pci_unmap_addr(ce, dma_addr),
- pci_unmap_len(ce, dma_len),
- PCI_DMA_FROMDEVICE);
- skb = ce->skb;
- if (!offload && sge->rx_pkt_pad)
- __skb_pull(skb, sge->rx_pkt_pad);
- }
-
- skb_put(skb, len);
-
-
- if (unlikely(offload)) {
- {
- printk(KERN_ERR
- "%s: unexpected offloaded packet, cmd %u\n",
- adapter->name, *skb->data);
- dev_kfree_skb_any(skb);
- }
- } else {
- struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)skb->data;
-
- skb_pull(skb, sizeof(*p));
- skb->dev = adapter->port[p->iff].dev;
- skb->dev->last_rx = jiffies;
- skb->protocol = sge_eth_type_trans(skb, skb->dev);
- if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff &&
- skb->protocol == htons(ETH_P_IP) &&
- (skb->data[9] == IPPROTO_TCP ||
- skb->data[9] == IPPROTO_UDP))
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- else
- skb->ip_summed = CHECKSUM_NONE;
- if (adapter->vlan_grp && p->vlan_valid)
- vlan_hwaccel_rx(skb, adapter->vlan_grp,
- ntohs(p->vlan));
- else
- netif_rx(skb);
- }
-
- if (++Q->cidx == Q->entries_n)
- Q->cidx = 0;
-
- if (unlikely(--Q->credits < Q->entries_n - SGE_FREEL_REFILL_THRESH))
- refill_free_list(sge, Q);
- return 1;
-}
-
-
-/*
- * Adaptive interrupt timer logic to keep the CPU utilization to
- * manageable levels. Basically, as the Average Packet Size (APS)
- * gets higher, the interrupt latency setting gets longer. Every
- * SGE_INTR_BUCKETSIZE (of 100B) causes a bump of 2usec to the
- * base value of SGE_INTRTIMER0. At large values of payload the
- * latency hits the ceiling value of SGE_INTRTIMER1 stored at
- * index SGE_INTR_MAXBUCKETS-1 in sge->intrtimer[].
- *
- * sge->currIndex caches the last index to save unneeded PIOs.
- */
-static inline void update_intr_timer(struct sge *sge, unsigned int avg_payload)
-{
- unsigned int newIndex;
-
- newIndex = avg_payload / SGE_INTR_BUCKETSIZE;
- if (newIndex > SGE_INTR_MAXBUCKETS - 1) {
- newIndex = SGE_INTR_MAXBUCKETS - 1;
- }
- /* Save a PIO with this check....maybe */
- if (newIndex != sge->currIndex) {
- t1_write_reg_4(sge->adapter, A_SG_INTRTIMER,
- sge->intrtimer[newIndex]);
- sge->currIndex = newIndex;
- sge->adapter->params.sge.last_rx_coalesce_raw =
- sge->intrtimer[newIndex];
- }
-}
-
-/*
- * Returns true if command queue q_num has enough available descriptors that
- * we can resume Tx operation after temporarily disabling its packet queue.
- */
-static inline int enough_free_Tx_descs(struct sge *sge, int q_num)
-{
- return atomic_read(&sge->cmdQ[q_num].credits) >
- (sge->cmdQ[q_num].entries_n >> 2);
-}
-
-/*
- * Main interrupt handler, optimized assuming that we took a 'DATA'
- * interrupt.
- *
- * 1. Clear the interrupt
- * 2. Loop while we find valid descriptors and process them; accumulate
- * information that can be processed after the loop
- * 3. Tell the SGE at which index we stopped processing descriptors
- * 4. Bookkeeping; free TX buffers, ring doorbell if there are any
- * outstanding TX buffers waiting, replenish RX buffers, potentially
- * reenable upper layers if they were turned off due to lack of TX
- * resources which are available again.
- * 5. If we took an interrupt, but no valid respQ descriptors was found we
- * let the slow_intr_handler run and do error handling.
- */
-irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs)
-{
- struct net_device *netdev;
- struct adapter *adapter = cookie;
+ struct adapter *adapter = (struct adapter *)data;
struct sge *sge = adapter->sge;
- struct respQ *Q = &sge->respQ;
- unsigned int credits = Q->credits, flags = 0, ret = 0;
- unsigned int tot_rxpayload = 0, tot_txpayload = 0, n_rx = 0, n_tx = 0;
- unsigned int credits_pend[SGE_CMDQ_N] = { 0, 0 };
- struct respQ_e *e = &Q->entries[Q->cidx];
- prefetch(e);
+ if (netif_running(adapter->port[0].dev)) {
+ struct sk_buff *skb = sge->espibug_skb;
- t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_SGE_DATA);
+ u32 seop = t1_espi_get_mon(adapter, 0x930, 0);
-
- while (e->GenerationBit == Q->genbit) {
- if (--credits < SGE_RESPQ_REPLENISH_THRES) {
- u32 n = Q->entries_n - credits - 1;
-
- t1_write_reg_4(adapter, A_SG_RSPQUEUECREDIT, n);
- credits += n;
- }
- if (likely(e->DataValid)) {
- if (!e->Sop || !e->Eop)
- BUG();
- t1_sge_rx(sge, &sge->freelQ[e->FreelistQid],
- e->BufferLength, e->Offload);
- tot_rxpayload += e->BufferLength;
- ++n_rx;
- }
- flags |= e->Qsleeping;
- credits_pend[0] += e->Cmdq0CreditReturn;
- credits_pend[1] += e->Cmdq1CreditReturn;
-
-#ifdef CONFIG_SMP
- /*
- * If enough cmdQ0 buffers have finished DMAing free them so
- * anyone that may be waiting for their release can continue.
- * We do this only on MP systems to allow other CPUs to proceed
- * promptly. UP systems can wait for the free_cmdQ_buffers()
- * calls after this loop as the sole CPU is currently busy in
- * this loop.
- */
- if (unlikely(credits_pend[0] > SGE_FREEL_REFILL_THRESH)) {
- free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0],
- &tot_txpayload);
- n_tx += credits_pend[0];
- credits_pend[0] = 0;
- }
-#endif
- ret++;
- e++;
- if (unlikely(++Q->cidx == Q->entries_n)) {
- Q->cidx = 0;
- Q->genbit ^= 1;
- e = Q->entries;
- }
- }
-
- Q->credits = credits;
- t1_write_reg_4(adapter, A_SG_SLEEPING, Q->cidx);
-
- if (credits_pend[0])
- free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], &tot_txpayload);
- if (credits_pend[1])
- free_cmdQ_buffers(sge, &sge->cmdQ[1], credits_pend[1], &tot_txpayload);
-
- /* Do any coalescing and interrupt latency timer adjustments */
- if (adapter->params.sge.coalesce_enable) {
- unsigned int avg_txpayload = 0, avg_rxpayload = 0;
-
- n_tx += credits_pend[0] + credits_pend[1];
-
- /*
- * Choose larger avg. payload size to increase
- * throughput and reduce [CPU util., intr/s.]
- *
- * Throughput behavior favored in mixed-mode.
- */
- if (n_tx)
- avg_txpayload = tot_txpayload/n_tx;
- if (n_rx)
- avg_rxpayload = tot_rxpayload/n_rx;
-
- if (n_tx && avg_txpayload > avg_rxpayload){
- update_intr_timer(sge, avg_txpayload);
- } else if (n_rx) {
- update_intr_timer(sge, avg_rxpayload);
- }
- }
-
- if (flags & F_CMDQ0_ENABLE) {
- struct cmdQ *cmdQ = &sge->cmdQ[0];
-
- atomic_set(&cmdQ->asleep, 1);
- if (atomic_read(&cmdQ->pio_pidx) != cmdQ->pidx) {
- doorbell_pio(sge, F_CMDQ0_ENABLE);
- atomic_set(&cmdQ->pio_pidx, cmdQ->pidx);
- }
- }
- if (unlikely(flags & (F_FL0_ENABLE | F_FL1_ENABLE)))
- freelQs_empty(sge);
-
- netdev = adapter->port[0].dev;
- if (unlikely(netif_queue_stopped(netdev) && netif_carrier_ok(netdev) &&
- enough_free_Tx_descs(sge, 0) &&
- enough_free_Tx_descs(sge, 1))) {
- netif_wake_queue(netdev);
- }
- if (unlikely(!ret))
- ret = t1_slow_intr_handler(adapter);
-
- return IRQ_RETVAL(ret != 0);
-}
-
-/*
- * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
- *
- * The code figures out how many entries the sk_buff will require in the
- * cmdQ and updates the cmdQ data structure with the state once the enqueue
- * has complete. Then, it doesn't access the global structure anymore, but
- * uses the corresponding fields on the stack. In conjuction with a spinlock
- * around that code, we can make the function reentrant without holding the
- * lock when we actually enqueue (which might be expensive, especially on
- * architectures with IO MMUs).
- */
-static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
- unsigned int qid)
-{
- struct sge *sge = adapter->sge;
- struct cmdQ *Q = &sge->cmdQ[qid];
- struct cmdQ_e *e;
- struct cmdQ_ce *ce;
- dma_addr_t mapping;
- unsigned int credits, pidx, genbit;
-
- unsigned int count = 1 + skb_shinfo(skb)->nr_frags;
-
- /*
- * Coming from the timer
- */
- if ((skb == sge->pskb)) {
- /*
- * Quit if any cmdQ activities
- */
- if (!spin_trylock(&Q->Qlock))
- return 0;
- if (atomic_read(&Q->credits) != Q->entries_n) {
- spin_unlock(&Q->Qlock);
- return 0;
- }
- }
- else
- spin_lock(&Q->Qlock);
-
- genbit = Q->genbit;
- pidx = Q->pidx;
- credits = atomic_read(&Q->credits);
-
- credits -= count;
- atomic_sub(count, &Q->credits);
- Q->pidx += count;
- if (Q->pidx >= Q->entries_n) {
- Q->pidx -= Q->entries_n;
- Q->genbit ^= 1;
- }
-
- if (unlikely(credits < (MAX_SKB_FRAGS + 1))) {
- sge->intr_cnt.cmdQ_full[qid]++;
- netif_stop_queue(adapter->port[0].dev);
- }
- spin_unlock(&Q->Qlock);
-
- mapping = pci_map_single(adapter->pdev, skb->data,
- skb->len - skb->data_len, PCI_DMA_TODEVICE);
- ce = &Q->centries[pidx];
- ce->skb = NULL;
- pci_unmap_addr_set(ce, dma_addr, mapping);
- pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len);
- ce->single = 1;
-
- e = &Q->entries[pidx];
- e->Sop = 1;
- e->DataValid = 1;
- e->BufferLength = skb->len - skb->data_len;
- e->AddrHigh = (u64)mapping >> 32;
- e->AddrLow = (u32)mapping;
-
- if (--count > 0) {
- unsigned int i;
-
- e->Eop = 0;
- wmb();
- e->GenerationBit = e->GenerationBit2 = genbit;
-
- for (i = 0; i < count; i++) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-
- ce++; e++;
- if (++pidx == Q->entries_n) {
- pidx = 0;
- genbit ^= 1;
- ce = Q->centries;
- e = Q->entries;
+ if ((seop & 0xfff0fff) == 0xfff && skb) {
+ if (!skb->cb[0]) {
+ u8 ch_mac_addr[ETH_ALEN] =
+ {0x0, 0x7, 0x43, 0x0, 0x0, 0x0};
+ memcpy(skb->data + sizeof(struct cpl_tx_pkt),
+ ch_mac_addr, ETH_ALEN);
+ memcpy(skb->data + skb->len - 10, ch_mac_addr,
+ ETH_ALEN);
+ skb->cb[0] = 0xff;
}
- mapping = pci_map_page(adapter->pdev, frag->page,
- frag->page_offset,
- frag->size,
- PCI_DMA_TODEVICE);
- ce->skb = NULL;
- pci_unmap_addr_set(ce, dma_addr, mapping);
- pci_unmap_len_set(ce, dma_len, frag->size);
- ce->single = 0;
-
- e->Sop = 0;
- e->DataValid = 1;
- e->BufferLength = frag->size;
- e->AddrHigh = (u64)mapping >> 32;
- e->AddrLow = (u32)mapping;
-
- if (i < count - 1) {
- e->Eop = 0;
- wmb();
- e->GenerationBit = e->GenerationBit2 = genbit;
- }
+ /* bump the reference count to avoid freeing of the
+ * skb once the DMA has completed.
+ */
+ skb = skb_get(skb);
+ t1_sge_tx(skb, adapter, 0, adapter->port[0].dev);
}
}
-
- if (skb != sge->pskb)
- ce->skb = skb;
- e->Eop = 1;
- wmb();
- e->GenerationBit = e->GenerationBit2 = genbit;
-
- /*
- * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring
- * the doorbell if the Q is asleep. There is a natural race, where
- * the hardware is going to sleep just after we checked, however,
- * then the interrupt handler will detect the outstanding TX packet
- * and ring the doorbell for us.
- */
- if (qid) {
- doorbell_pio(sge, F_CMDQ1_ENABLE);
- } else if (atomic_read(&Q->asleep)) {
- atomic_set(&Q->asleep, 0);
- doorbell_pio(sge, F_CMDQ0_ENABLE);
- atomic_set(&Q->pio_pidx, Q->pidx);
- }
- return 0;
+ mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout);
}
-#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14))
-
/*
- * Adds the CPL header to the sk_buff and passes it to t1_sge_tx.
+ * Creates a t1_sge structure and returns suggested resource parameters.
*/
-int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
+struct sge * __devinit t1_sge_create(struct adapter *adapter,
+ struct sge_params *p)
{
- struct adapter *adapter = dev->priv;
- struct cpl_tx_pkt *cpl;
- struct ethhdr *eth;
- size_t max_len;
+ struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL);
- /*
- * We are using a non-standard hard_header_len and some kernel
- * components, such as pktgen, do not handle it right. Complain
- * when this happens but try to fix things up.
- */
- if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) {
- struct sk_buff *orig_skb = skb;
+ if (!sge)
+ return NULL;
+ memset(sge, 0, sizeof(*sge));
- if (net_ratelimit())
- printk(KERN_ERR
- "%s: Tx packet has inadequate headroom\n",
- dev->name);
- skb = skb_realloc_headroom(skb, sizeof(struct cpl_tx_pkt_lso));
- dev_kfree_skb_any(orig_skb);
- if (!skb)
- return -ENOMEM;
+ sge->adapter = adapter;
+ sge->netdev = adapter->port[0].dev;
+ sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2;
+ sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0;
+
+ init_timer(&sge->tx_reclaim_timer);
+ sge->tx_reclaim_timer.data = (unsigned long)sge;
+ sge->tx_reclaim_timer.function = sge_tx_reclaim_cb;
+
+ if (is_T2(sge->adapter)) {
+ init_timer(&sge->espibug_timer);
+ sge->espibug_timer.function = (void *)&espibug_workaround;
+ sge->espibug_timer.data = (unsigned long)sge->adapter;
+ sge->espibug_timeout = 1;
}
+
- if (skb_shinfo(skb)->tso_size) {
- int eth_type;
- struct cpl_tx_pkt_lso *hdr;
+ p->cmdQ_size[0] = SGE_CMDQ0_E_N;
+ p->cmdQ_size[1] = SGE_CMDQ1_E_N;
+ p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE;
+ p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE;
+ p->rx_coalesce_usecs = 50;
+ p->coalesce_enable = 0;
+ p->sample_interval_usecs = 0;
+ p->polling = 0;
- eth_type = skb->nh.raw - skb->data == ETH_HLEN ?
- CPL_ETH_II : CPL_ETH_II_VLAN;
-
- hdr = (struct cpl_tx_pkt_lso *)skb_push(skb, sizeof(*hdr));
- hdr->opcode = CPL_TX_PKT_LSO;
- hdr->ip_csum_dis = hdr->l4_csum_dis = 0;
- hdr->ip_hdr_words = skb->nh.iph->ihl;
- hdr->tcp_hdr_words = skb->h.th->doff;
- hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type,
- skb_shinfo(skb)->tso_size));
- hdr->len = htonl(skb->len - sizeof(*hdr));
- cpl = (struct cpl_tx_pkt *)hdr;
- } else
- {
- /*
- * An Ethernet packet must have at least space for
- * the DIX Ethernet header and be no greater than
- * the device set MTU. Otherwise trash the packet.
- */
- if (skb->len < ETH_HLEN)
- goto t1_start_xmit_fail2;
- eth = (struct ethhdr *)skb->data;
- if (eth->h_proto == htons(ETH_P_8021Q))
- max_len = dev->mtu + VLAN_ETH_HLEN;
- else
- max_len = dev->mtu + ETH_HLEN;
- if (skb->len > max_len)
- goto t1_start_xmit_fail2;
-
- if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
- skb->ip_summed == CHECKSUM_HW &&
- skb->nh.iph->protocol == IPPROTO_UDP &&
- skb_checksum_help(skb, 0))
- goto t1_start_xmit_fail3;
-
-
- if (!adapter->sge->pskb) {
- if (skb->protocol == htons(ETH_P_ARP) &&
- skb->nh.arph->ar_op == htons(ARPOP_REQUEST))
- adapter->sge->pskb = skb;
- }
- cpl = (struct cpl_tx_pkt *)skb_push(skb, sizeof(*cpl));
- cpl->opcode = CPL_TX_PKT;
- cpl->ip_csum_dis = 1; /* SW calculates IP csum */
- cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1;
- /* the length field isn't used so don't bother setting it */
- }
- cpl->iff = dev->if_port;
-
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
- if (adapter->vlan_grp && vlan_tx_tag_present(skb)) {
- cpl->vlan_valid = 1;
- cpl->vlan = htons(vlan_tx_tag_get(skb));
- } else
-#endif
- cpl->vlan_valid = 0;
-
- dev->trans_start = jiffies;
- return t1_sge_tx(skb, adapter, 0);
-
-t1_start_xmit_fail3:
- printk(KERN_INFO "%s: Unable to complete checksum\n", dev->name);
- goto t1_start_xmit_fail1;
-
-t1_start_xmit_fail2:
- printk(KERN_INFO "%s: Invalid packet length %d, dropping\n",
- dev->name, skb->len);
-
-t1_start_xmit_fail1:
- dev_kfree_skb_any(skb);
- return 0;
+ return sge;
}
-
-void t1_sge_set_ptimeout(adapter_t *adapter, u32 val)
-{
- struct sge *sge = adapter->sge;
-
- if (is_T2(adapter))
- sge->ptimeout = max((u32)((HZ * val) / 1000), (u32)1);
-}
-
-u32 t1_sge_get_ptimeout(adapter_t *adapter)
-{
- struct sge *sge = adapter->sge;
-
- return (is_T2(adapter) ? ((sge->ptimeout * 1000) / HZ) : 0);
-}
-
diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h
index 140f896..434b255 100644
--- a/drivers/net/chelsio/sge.h
+++ b/drivers/net/chelsio/sge.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: sge.h *
- * $Revision: 1.7 $ *
- * $Date: 2005/03/23 07:15:59 $ *
+ * $Revision: 1.11 $ *
+ * $Date: 2005/06/21 22:10:55 $ *
* Description: *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
@@ -36,25 +36,50 @@
* *
****************************************************************************/
-#ifndef _CHELSIO_LINUX_SGE_H_
-#define _CHELSIO_LINUX_SGE_H_
+#ifndef _CXGB_SGE_H_
+#define _CXGB_SGE_H_
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/byteorder.h>
+#ifndef IRQ_RETVAL
+#define IRQ_RETVAL(x)
+typedef void irqreturn_t;
+#endif
+
+typedef irqreturn_t (*intr_handler_t)(int, void *, struct pt_regs *);
+
struct sge_intr_counts {
unsigned int respQ_empty; /* # times respQ empty */
unsigned int respQ_overflow; /* # respQ overflow (fatal) */
unsigned int freelistQ_empty; /* # times freelist empty */
unsigned int pkt_too_big; /* packet too large (fatal) */
unsigned int pkt_mismatch;
- unsigned int cmdQ_full[2]; /* not HW interrupt, host cmdQ[] full */
+ unsigned int cmdQ_full[3]; /* not HW IRQ, host cmdQ[] full */
+ unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */
+ unsigned int ethernet_pkts; /* # of Ethernet packets received */
+ unsigned int offload_pkts; /* # of offload packets received */
+ unsigned int offload_bundles; /* # of offload pkt bundles delivered */
+ unsigned int pure_rsps; /* # of non-payload responses */
+ unsigned int unhandled_irqs; /* # of unhandled interrupts */
+ unsigned int tx_ipfrags;
+ unsigned int tx_reg_pkts;
+ unsigned int tx_lso_pkts;
+ unsigned int tx_do_cksum;
+};
+
+struct sge_port_stats {
+ unsigned long rx_cso_good; /* # of successful RX csum offloads */
+ unsigned long tx_cso; /* # of TX checksum offloads */
+ unsigned long vlan_xtract; /* # of VLAN tag extractions */
+ unsigned long vlan_insert; /* # of VLAN tag extractions */
+ unsigned long tso; /* # of TSO requests */
+ unsigned long rx_drops; /* # of packets dropped due to no mem */
};
struct sk_buff;
struct net_device;
-struct cxgbdev;
struct adapter;
struct sge_params;
struct sge;
@@ -63,7 +88,9 @@
int t1_sge_configure(struct sge *, struct sge_params *);
int t1_sge_set_coalesce_params(struct sge *, struct sge_params *);
void t1_sge_destroy(struct sge *);
-irqreturn_t t1_interrupt(int, void *, struct pt_regs *);
+intr_handler_t t1_select_intr_handler(adapter_t *adapter);
+unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
+ unsigned int qid, struct net_device *netdev);
int t1_start_xmit(struct sk_buff *skb, struct net_device *dev);
void t1_set_vlan_accel(struct adapter *adapter, int on_off);
void t1_sge_start(struct sge *);
@@ -72,8 +99,7 @@
void t1_sge_intr_enable(struct sge *);
void t1_sge_intr_disable(struct sge *);
void t1_sge_intr_clear(struct sge *);
+const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge);
+const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port);
-void t1_sge_set_ptimeout(adapter_t *adapter, u32 val);
-u32 t1_sge_get_ptimeout(adapter_t *adapter);
-
-#endif /* _CHELSIO_LINUX_SGE_H_ */
+#endif /* _CXGB_SGE_H_ */
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index a90a3f9..1ebb5d1 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: subr.c *
- * $Revision: 1.12 $ *
- * $Date: 2005/03/23 07:41:27 $ *
+ * $Revision: 1.27 $ *
+ * $Date: 2005/06/22 01:08:36 $ *
* Description: *
* Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
* part of the Chelsio 10Gb Ethernet Driver. *
@@ -40,11 +40,9 @@
#include "common.h"
#include "elmer0.h"
#include "regs.h"
-
#include "gmac.h"
#include "cphy.h"
#include "sge.h"
-#include "tp.h"
#include "espi.h"
/**
@@ -64,7 +62,7 @@
int attempts, int delay)
{
while (1) {
- u32 val = t1_read_reg_4(adapter, reg) & mask;
+ u32 val = readl(adapter->regs + reg) & mask;
if (!!val == polarity)
return 0;
@@ -84,9 +82,9 @@
{
int tpi_busy;
- t1_write_reg_4(adapter, A_TPI_ADDR, addr);
- t1_write_reg_4(adapter, A_TPI_WR_DATA, value);
- t1_write_reg_4(adapter, A_TPI_CSR, F_TPIWR);
+ writel(addr, adapter->regs + A_TPI_ADDR);
+ writel(value, adapter->regs + A_TPI_WR_DATA);
+ writel(F_TPIWR, adapter->regs + A_TPI_CSR);
tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
TPI_ATTEMPTS, 3);
@@ -100,9 +98,9 @@
{
int ret;
- TPI_LOCK(adapter);
+ spin_lock(&(adapter)->tpi_lock);
ret = __t1_tpi_write(adapter, addr, value);
- TPI_UNLOCK(adapter);
+ spin_unlock(&(adapter)->tpi_lock);
return ret;
}
@@ -113,8 +111,8 @@
{
int tpi_busy;
- t1_write_reg_4(adapter, A_TPI_ADDR, addr);
- t1_write_reg_4(adapter, A_TPI_CSR, 0);
+ writel(addr, adapter->regs + A_TPI_ADDR);
+ writel(0, adapter->regs + A_TPI_CSR);
tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
TPI_ATTEMPTS, 3);
@@ -122,7 +120,7 @@
CH_ALERT("%s: TPI read from 0x%x failed\n",
adapter->name, addr);
else
- *valp = t1_read_reg_4(adapter, A_TPI_RD_DATA);
+ *valp = readl(adapter->regs + A_TPI_RD_DATA);
return tpi_busy;
}
@@ -130,21 +128,13 @@
{
int ret;
- TPI_LOCK(adapter);
+ spin_lock(&(adapter)->tpi_lock);
ret = __t1_tpi_read(adapter, addr, valp);
- TPI_UNLOCK(adapter);
+ spin_unlock(&(adapter)->tpi_lock);
return ret;
}
/*
- * Set a TPI parameter.
- */
-static void t1_tpi_par(adapter_t *adapter, u32 value)
-{
- t1_write_reg_4(adapter, A_TPI_PAR, V_TPIPAR(value));
-}
-
-/*
* Called when a port's link settings change to propagate the new values to the
* associated PHY and MAC. After performing the common tasks it invokes an
* OS-specific handler.
@@ -227,7 +217,7 @@
{
u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
- TPI_LOCK(adapter);
+ spin_lock(&(adapter)->tpi_lock);
/* Write the address we want. */
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
@@ -242,7 +232,7 @@
/* Read the data. */
__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
- TPI_UNLOCK(adapter);
+ spin_unlock(&(adapter)->tpi_lock);
return 0;
}
@@ -251,7 +241,7 @@
{
u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
- TPI_LOCK(adapter);
+ spin_lock(&(adapter)->tpi_lock);
/* Write the address we want. */
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
@@ -264,7 +254,7 @@
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
- TPI_UNLOCK(adapter);
+ spin_unlock(&(adapter)->tpi_lock);
return 0;
}
@@ -277,7 +267,6 @@
enum {
CH_BRD_N110_1F,
CH_BRD_N210_1F,
- CH_BRD_T210_1F,
};
static struct board_info t1_board[] = {
@@ -308,13 +297,15 @@
{ 0, }
};
+MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
+
/*
* Return the board_info structure with a given index. Out-of-range indices
* return NULL.
*/
const struct board_info *t1_get_board_info(unsigned int board_id)
{
- return board_id < DIMOF(t1_board) ? &t1_board[board_id] : NULL;
+ return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL;
}
struct chelsio_vpd_t {
@@ -436,7 +427,6 @@
t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
switch (board_info(adapter)->board) {
- case CHBT_BOARD_CHT210:
case CHBT_BOARD_N210:
case CHBT_BOARD_N110:
if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
@@ -446,23 +436,6 @@
link_changed(adapter, 0);
}
break;
- case CHBT_BOARD_8000:
- case CHBT_BOARD_CHT110:
- CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
- cause);
- if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */
- struct cmac *mac = adapter->port[0].mac;
-
- mac->ops->interrupt_handler(mac);
- }
- if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */
- u32 mod_detect;
-
- t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
- CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
- mod_detect ? "removed" : "inserted");
- }
- break;
}
t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
return 0;
@@ -472,11 +445,11 @@
void t1_interrupts_enable(adapter_t *adapter)
{
unsigned int i;
+ u32 pl_intr;
- adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP;
+ adapter->slow_intr_mask = F_PL_INTR_SGE_ERR;
t1_sge_intr_enable(adapter->sge);
- t1_tp_intr_enable(adapter->tp);
if (adapter->espi) {
adapter->slow_intr_mask |= F_PL_INTR_ESPI;
t1_espi_intr_enable(adapter->espi);
@@ -489,17 +462,15 @@
}
/* Enable PCIX & external chip interrupts on ASIC boards. */
- if (t1_is_asic(adapter)) {
- u32 pl_intr = t1_read_reg_4(adapter, A_PL_ENABLE);
+ pl_intr = readl(adapter->regs + A_PL_ENABLE);
- /* PCI-X interrupts */
- pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
- 0xffffffff);
+ /* PCI-X interrupts */
+ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
+ 0xffffffff);
- adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
- pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
- t1_write_reg_4(adapter, A_PL_ENABLE, pl_intr);
- }
+ adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
+ pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
+ writel(pl_intr, adapter->regs + A_PL_ENABLE);
}
/* Disables all interrupts. */
@@ -508,7 +479,6 @@
unsigned int i;
t1_sge_intr_disable(adapter->sge);
- t1_tp_intr_disable(adapter->tp);
if (adapter->espi)
t1_espi_intr_disable(adapter->espi);
@@ -519,8 +489,7 @@
}
/* Disable PCIX & external chip interrupts. */
- if (t1_is_asic(adapter))
- t1_write_reg_4(adapter, A_PL_ENABLE, 0);
+ writel(0, adapter->regs + A_PL_ENABLE);
/* PCI-X interrupts */
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
@@ -532,9 +501,10 @@
void t1_interrupts_clear(adapter_t* adapter)
{
unsigned int i;
+ u32 pl_intr;
+
t1_sge_intr_clear(adapter->sge);
- t1_tp_intr_clear(adapter->tp);
if (adapter->espi)
t1_espi_intr_clear(adapter->espi);
@@ -545,12 +515,10 @@
}
/* Enable interrupts for external devices. */
- if (t1_is_asic(adapter)) {
- u32 pl_intr = t1_read_reg_4(adapter, A_PL_CAUSE);
+ pl_intr = readl(adapter->regs + A_PL_CAUSE);
- t1_write_reg_4(adapter, A_PL_CAUSE,
- pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX);
- }
+ writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
+ adapter->regs + A_PL_CAUSE);
/* PCI-X interrupts */
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
@@ -559,17 +527,15 @@
/*
* Slow path interrupt handler for ASICs.
*/
-static int asic_slow_intr(adapter_t *adapter)
+int t1_slow_intr_handler(adapter_t *adapter)
{
- u32 cause = t1_read_reg_4(adapter, A_PL_CAUSE);
+ u32 cause = readl(adapter->regs + A_PL_CAUSE);
cause &= adapter->slow_intr_mask;
if (!cause)
return 0;
if (cause & F_PL_INTR_SGE_ERR)
t1_sge_intr_error_handler(adapter->sge);
- if (cause & F_PL_INTR_TP)
- t1_tp_intr_handler(adapter->tp);
if (cause & F_PL_INTR_ESPI)
t1_espi_intr_handler(adapter->espi);
if (cause & F_PL_INTR_PCIX)
@@ -578,41 +544,82 @@
t1_elmer0_ext_intr(adapter);
/* Clear the interrupts just processed. */
- t1_write_reg_4(adapter, A_PL_CAUSE, cause);
- (void)t1_read_reg_4(adapter, A_PL_CAUSE); /* flush writes */
+ writel(cause, adapter->regs + A_PL_CAUSE);
+ (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */
return 1;
}
-int t1_slow_intr_handler(adapter_t *adapter)
+/* Pause deadlock avoidance parameters */
+#define DROP_MSEC 16
+#define DROP_PKTS_CNT 1
+
+static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable)
{
- return asic_slow_intr(adapter);
+ u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
+
+ if (enable)
+ val |= csum_bit;
+ else
+ val &= ~csum_bit;
+ writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
}
-/* Power sequencing is a work-around for Intel's XPAKs. */
-static void power_sequence_xpak(adapter_t* adapter)
+void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable)
{
- u32 mod_detect;
- u32 gpo;
+ set_csum_offload(adapter, F_IP_CSUM, enable);
+}
- /* Check for XPAK */
- t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
- if (!(ELMER0_GP_BIT5 & mod_detect)) {
- /* XPAK is present */
- t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
- gpo |= ELMER0_GP_BIT18;
- t1_tpi_write(adapter, A_ELMER0_GPO, gpo);
+void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable)
+{
+ set_csum_offload(adapter, F_UDP_CSUM, enable);
+}
+
+void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable)
+{
+ set_csum_offload(adapter, F_TCP_CSUM, enable);
+}
+
+static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk)
+{
+ u32 val;
+
+ val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
+ F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
+ val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
+ F_TP_IN_ESPI_CHECK_TCP_CSUM;
+ writel(val, adapter->regs + A_TP_IN_CONFIG);
+ writel(F_TP_OUT_CSPI_CPL |
+ F_TP_OUT_ESPI_ETHERNET |
+ F_TP_OUT_ESPI_GENERATE_IP_CSUM |
+ F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
+ adapter->regs + A_TP_OUT_CONFIG);
+
+ val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
+ val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM);
+ writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
+
+ /*
+ * Enable pause frame deadlock prevention.
+ */
+ if (is_T2(adapter)) {
+ u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
+
+ writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
+ V_DROP_TICKS_CNT(drop_ticks) |
+ V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
+ adapter->regs + A_TP_TX_DROP_CONFIG);
}
+
+ writel(F_TP_RESET, adapter->regs + A_TP_RESET);
}
int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
struct adapter_params *p)
{
p->chip_version = bi->chip_term;
- p->is_asic = (p->chip_version != CHBT_TERM_FPGA);
if (p->chip_version == CHBT_TERM_T1 ||
- p->chip_version == CHBT_TERM_T2 ||
- p->chip_version == CHBT_TERM_FPGA) {
- u32 val = t1_read_reg_4(adapter, A_TP_PC_CONFIG);
+ p->chip_version == CHBT_TERM_T2) {
+ u32 val = readl(adapter->regs + A_TP_PC_CONFIG);
val = G_TP_PC_REV(val);
if (val == 2)
@@ -633,23 +640,11 @@
static int board_init(adapter_t *adapter, const struct board_info *bi)
{
switch (bi->board) {
- case CHBT_BOARD_8000:
case CHBT_BOARD_N110:
case CHBT_BOARD_N210:
- case CHBT_BOARD_CHT210:
- case CHBT_BOARD_COUGAR:
- t1_tpi_par(adapter, 0xf);
+ writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR);
t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
break;
- case CHBT_BOARD_CHT110:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
-
- /* TBD XXX Might not need. This fixes a problem
- * described in the Intel SR XPAK errata.
- */
- power_sequence_xpak(adapter);
- break;
}
return 0;
}
@@ -663,20 +658,19 @@
int err = -EIO;
const struct board_info *bi = board_info(adapter);
- if (!adapter->mc4) {
- u32 val = t1_read_reg_4(adapter, A_MC4_CFG);
+ if (!bi->clock_mc4) {
+ u32 val = readl(adapter->regs + A_MC4_CFG);
- t1_write_reg_4(adapter, A_MC4_CFG, val | F_READY | F_MC4_SLOW);
- t1_write_reg_4(adapter, A_MC5_CONFIG,
- F_M_BUS_ENABLE | F_TCAM_RESET);
+ writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG);
+ writel(F_M_BUS_ENABLE | F_TCAM_RESET,
+ adapter->regs + A_MC5_CONFIG);
}
if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
bi->espi_nports))
goto out_err;
- if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core))
- goto out_err;
+ t1_tp_reset(adapter, bi->clock_core);
err = t1_sge_configure(adapter->sge, &adapter->params.sge);
if (err)
@@ -690,7 +684,7 @@
/*
* Determine a card's PCI mode.
*/
-static void __devinit get_pci_mode(adapter_t *adapter, struct pci_params *p)
+static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
{
static unsigned short speed_map[] = { 33, 66, 100, 133 };
u32 pci_mode;
@@ -720,8 +714,6 @@
if (adapter->sge)
t1_sge_destroy(adapter->sge);
- if (adapter->tp)
- t1_tp_destroy(adapter->tp);
if (adapter->espi)
t1_espi_destroy(adapter->espi);
}
@@ -764,21 +756,12 @@
goto error;
}
-
-
if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
CH_ERR("%s: ESPI initialization failed\n",
adapter->name);
goto error;
}
- adapter->tp = t1_tp_create(adapter, &adapter->params.tp);
- if (!adapter->tp) {
- CH_ERR("%s: TP initialization failed\n",
- adapter->name);
- goto error;
- }
-
board_init(adapter, bi);
bi->mdio_ops->init(adapter, bi);
if (bi->gphy->reset)
@@ -810,14 +793,12 @@
* Get the port's MAC addresses either from the EEPROM if one
* exists or the one hardcoded in the MAC.
*/
- if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY)
- mac->ops->macaddress_get(mac, hw_addr);
- else if (vpd_macaddress_get(adapter, i, hw_addr)) {
+ if (vpd_macaddress_get(adapter, i, hw_addr)) {
CH_ERR("%s: could not read MAC address from VPD ROM\n",
- port_name(adapter, i));
+ adapter->port[i].dev->name);
goto error;
}
- t1_set_hw_addr(adapter, i, hw_addr);
+ memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN);
init_link_config(&adapter->port[i].link_config, bi);
}
diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h
index 98352bd..81816c2 100644
--- a/drivers/net/chelsio/suni1x10gexp_regs.h
+++ b/drivers/net/chelsio/suni1x10gexp_regs.h
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: suni1x10gexp_regs.h *
- * $Revision: 1.4 $ *
- * $Date: 2005/03/23 07:15:59 $ *
+ * $Revision: 1.9 $ *
+ * $Date: 2005/06/22 00:17:04 $ *
* Description: *
* PMC/SIERRA (pm3393) MAC-PHY functionality. *
* part of the Chelsio 10Gb Ethernet Driver. *
@@ -21,24 +21,16 @@
* *
* http://www.chelsio.com *
* *
- * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
- * All rights reserved. *
- * *
* Maintainers: maintainers@chelsio.com *
* *
- * Authors: Dimitrios Michailidis <dm@chelsio.com> *
- * Tina Yang <tainay@chelsio.com> *
- * Felix Marti <felix@chelsio.com> *
- * Scott Bardone <sbardone@chelsio.com> *
- * Kurt Ottaway <kottaway@chelsio.com> *
- * Frank DiMambro <frank@chelsio.com> *
+ * Authors: PMC/SIERRA *
* *
* History: *
* *
****************************************************************************/
-#ifndef _SUNI1x10GEXP_REGS_H
-#define _SUNI1x10GEXP_REGS_H
+#ifndef _CXGB_SUNI1x10GEXP_REGS_H_
+#define _CXGB_SUNI1x10GEXP_REGS_H_
/******************************************************************************/
/** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/
@@ -217,5 +209,5 @@
#define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004
#define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002
-#endif /* _SUNI1x10GEXP_REGS_H */
+#endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */
diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c
deleted file mode 100644
index 9ad5c53..0000000
--- a/drivers/net/chelsio/tp.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*****************************************************************************
- * *
- * File: tp.c *
- * $Revision: 1.6 $ *
- * $Date: 2005/03/23 07:15:59 $ *
- * Description: *
- * Core ASIC Management. *
- * part of the Chelsio 10Gb Ethernet Driver. *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License, version 2, as *
- * published by the Free Software Foundation. *
- * *
- * You should have received a copy of the GNU General Public License along *
- * with this program; if not, write to the Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
- * *
- * http://www.chelsio.com *
- * *
- * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
- * All rights reserved. *
- * *
- * Maintainers: maintainers@chelsio.com *
- * *
- * Authors: Dimitrios Michailidis <dm@chelsio.com> *
- * Tina Yang <tainay@chelsio.com> *
- * Felix Marti <felix@chelsio.com> *
- * Scott Bardone <sbardone@chelsio.com> *
- * Kurt Ottaway <kottaway@chelsio.com> *
- * Frank DiMambro <frank@chelsio.com> *
- * *
- * History: *
- * *
- ****************************************************************************/
-
-#include "common.h"
-#include "regs.h"
-#include "tp.h"
-
-struct petp {
- adapter_t *adapter;
-};
-
-/* Pause deadlock avoidance parameters */
-#define DROP_MSEC 16
-#define DROP_PKTS_CNT 1
-
-
-static void tp_init(adapter_t *ap, const struct tp_params *p,
- unsigned int tp_clk)
-{
- if (t1_is_asic(ap)) {
- u32 val;
-
- val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
- F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
- if (!p->pm_size)
- val |= F_OFFLOAD_DISABLE;
- else
- val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
- F_TP_IN_ESPI_CHECK_TCP_CSUM;
- t1_write_reg_4(ap, A_TP_IN_CONFIG, val);
- t1_write_reg_4(ap, A_TP_OUT_CONFIG, F_TP_OUT_CSPI_CPL |
- F_TP_OUT_ESPI_ETHERNET |
- F_TP_OUT_ESPI_GENERATE_IP_CSUM |
- F_TP_OUT_ESPI_GENERATE_TCP_CSUM);
- t1_write_reg_4(ap, A_TP_GLOBAL_CONFIG, V_IP_TTL(64) |
- F_PATH_MTU /* IP DF bit */ |
- V_5TUPLE_LOOKUP(p->use_5tuple_mode) |
- V_SYN_COOKIE_PARAMETER(29));
-
- /*
- * Enable pause frame deadlock prevention.
- */
- if (is_T2(ap)) {
- u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
-
- t1_write_reg_4(ap, A_TP_TX_DROP_CONFIG,
- F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
- V_DROP_TICKS_CNT(drop_ticks) |
- V_NUM_PKTS_DROPPED(DROP_PKTS_CNT));
- }
-
- }
-}
-
-void t1_tp_destroy(struct petp *tp)
-{
- kfree(tp);
-}
-
-struct petp * __devinit t1_tp_create(adapter_t *adapter, struct tp_params *p)
-{
- struct petp *tp = kmalloc(sizeof(*tp), GFP_KERNEL);
- if (!tp)
- return NULL;
- memset(tp, 0, sizeof(*tp));
- tp->adapter = adapter;
-
- return tp;
-}
-
-void t1_tp_intr_enable(struct petp *tp)
-{
- u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE);
-
- {
- /* We don't use any TP interrupts */
- t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0);
- t1_write_reg_4(tp->adapter, A_PL_ENABLE,
- tp_intr | F_PL_INTR_TP);
- }
-}
-
-void t1_tp_intr_disable(struct petp *tp)
-{
- u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE);
-
- {
- t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0);
- t1_write_reg_4(tp->adapter, A_PL_ENABLE,
- tp_intr & ~F_PL_INTR_TP);
- }
-}
-
-void t1_tp_intr_clear(struct petp *tp)
-{
- t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, 0xffffffff);
- t1_write_reg_4(tp->adapter, A_PL_CAUSE, F_PL_INTR_TP);
-}
-
-int t1_tp_intr_handler(struct petp *tp)
-{
- u32 cause;
-
-
- cause = t1_read_reg_4(tp->adapter, A_TP_INT_CAUSE);
- t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, cause);
- return 0;
-}
-
-static void set_csum_offload(struct petp *tp, u32 csum_bit, int enable)
-{
- u32 val = t1_read_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG);
-
- if (enable)
- val |= csum_bit;
- else
- val &= ~csum_bit;
- t1_write_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG, val);
-}
-
-void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable)
-{
- set_csum_offload(tp, F_IP_CSUM, enable);
-}
-
-void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable)
-{
- set_csum_offload(tp, F_UDP_CSUM, enable);
-}
-
-void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable)
-{
- set_csum_offload(tp, F_TCP_CSUM, enable);
-}
-
-/*
- * Initialize TP state. tp_params contains initial settings for some TP
- * parameters, particularly the one-time PM and CM settings.
- */
-int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk)
-{
- int busy = 0;
- adapter_t *adapter = tp->adapter;
-
- tp_init(adapter, p, tp_clk);
- if (!busy)
- t1_write_reg_4(adapter, A_TP_RESET, F_TP_RESET);
- else
- CH_ERR("%s: TP initialization timed out\n",
- adapter->name);
- return busy;
-}
diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h
deleted file mode 100644
index 2ebc5c0..0000000
--- a/drivers/net/chelsio/tp.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*****************************************************************************
- * *
- * File: tp.h *
- * $Revision: 1.3 $ *
- * $Date: 2005/03/23 07:15:59 $ *
- * Description: *
- * part of the Chelsio 10Gb Ethernet Driver. *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License, version 2, as *
- * published by the Free Software Foundation. *
- * *
- * You should have received a copy of the GNU General Public License along *
- * with this program; if not, write to the Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
- * *
- * http://www.chelsio.com *
- * *
- * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
- * All rights reserved. *
- * *
- * Maintainers: maintainers@chelsio.com *
- * *
- * Authors: Dimitrios Michailidis <dm@chelsio.com> *
- * Tina Yang <tainay@chelsio.com> *
- * Felix Marti <felix@chelsio.com> *
- * Scott Bardone <sbardone@chelsio.com> *
- * Kurt Ottaway <kottaway@chelsio.com> *
- * Frank DiMambro <frank@chelsio.com> *
- * *
- * History: *
- * *
- ****************************************************************************/
-
-#ifndef CHELSIO_TP_H
-#define CHELSIO_TP_H
-
-#include "common.h"
-
-#define TP_MAX_RX_COALESCING_SIZE 16224U
-
-struct tp_mib_statistics {
-
- /* IP */
- u32 ipInReceive_hi;
- u32 ipInReceive_lo;
- u32 ipInHdrErrors_hi;
- u32 ipInHdrErrors_lo;
- u32 ipInAddrErrors_hi;
- u32 ipInAddrErrors_lo;
- u32 ipInUnknownProtos_hi;
- u32 ipInUnknownProtos_lo;
- u32 ipInDiscards_hi;
- u32 ipInDiscards_lo;
- u32 ipInDelivers_hi;
- u32 ipInDelivers_lo;
- u32 ipOutRequests_hi;
- u32 ipOutRequests_lo;
- u32 ipOutDiscards_hi;
- u32 ipOutDiscards_lo;
- u32 ipOutNoRoutes_hi;
- u32 ipOutNoRoutes_lo;
- u32 ipReasmTimeout;
- u32 ipReasmReqds;
- u32 ipReasmOKs;
- u32 ipReasmFails;
-
- u32 reserved[8];
-
- /* TCP */
- u32 tcpActiveOpens;
- u32 tcpPassiveOpens;
- u32 tcpAttemptFails;
- u32 tcpEstabResets;
- u32 tcpOutRsts;
- u32 tcpCurrEstab;
- u32 tcpInSegs_hi;
- u32 tcpInSegs_lo;
- u32 tcpOutSegs_hi;
- u32 tcpOutSegs_lo;
- u32 tcpRetransSeg_hi;
- u32 tcpRetransSeg_lo;
- u32 tcpInErrs_hi;
- u32 tcpInErrs_lo;
- u32 tcpRtoMin;
- u32 tcpRtoMax;
-};
-
-struct petp;
-struct tp_params;
-
-struct petp *t1_tp_create(adapter_t *adapter, struct tp_params *p);
-void t1_tp_destroy(struct petp *tp);
-
-void t1_tp_intr_disable(struct petp *tp);
-void t1_tp_intr_enable(struct petp *tp);
-void t1_tp_intr_clear(struct petp *tp);
-int t1_tp_intr_handler(struct petp *tp);
-
-void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps);
-void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable);
-void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable);
-void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable);
-int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size);
-int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk);
-#endif