| /* |
| * USB Serial Converter driver |
| * |
| * Copyright (C) 1999 - 2005 |
| * Greg Kroah-Hartman (greg@kroah.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| * |
| */ |
| |
| |
| #ifndef __LINUX_USB_SERIAL_H |
| #define __LINUX_USB_SERIAL_H |
| |
| #include <linux/config.h> |
| #include <linux/kref.h> |
| #include <linux/mutex.h> |
| |
| #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ |
| #define SERIAL_TTY_MINORS 255 /* loads of devices :) */ |
| |
| #define MAX_NUM_PORTS 8 /* The maximum number of ports one device can grab at once */ |
| |
| /* parity check flag */ |
| #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) |
| |
| /** |
| * usb_serial_port: structure for the specific ports of a device. |
| * @serial: pointer back to the struct usb_serial owner of this port. |
| * @tty: pointer to the corresponding tty for this port. |
| * @lock: spinlock to grab when updating portions of this structure. |
| * @mutex: mutex used to synchronize serial_open() and serial_close() |
| * access for this port. |
| * @number: the number of the port (the minor number). |
| * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. |
| * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. |
| * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe |
| * for this port. |
| * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. |
| * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. |
| * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. |
| * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe |
| * for this port. |
| * @bulk_in_buffer: pointer to the bulk in buffer for this port. |
| * @read_urb: pointer to the bulk in struct urb for this port. |
| * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this |
| * port. |
| * @bulk_out_buffer: pointer to the bulk out buffer for this port. |
| * @bulk_out_size: the size of the bulk_out_buffer, in bytes. |
| * @write_urb: pointer to the bulk out struct urb for this port. |
| * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this |
| * port. |
| * @write_wait: a wait_queue_head_t used by the port. |
| * @work: work queue entry for the line discipline waking up. |
| * @open_count: number of times this port has been opened. |
| * |
| * This structure is used by the usb-serial core and drivers for the specific |
| * ports of a device. |
| */ |
| struct usb_serial_port { |
| struct usb_serial * serial; |
| struct tty_struct * tty; |
| spinlock_t lock; |
| struct mutex mutex; |
| unsigned char number; |
| |
| unsigned char * interrupt_in_buffer; |
| struct urb * interrupt_in_urb; |
| __u8 interrupt_in_endpointAddress; |
| |
| unsigned char * interrupt_out_buffer; |
| int interrupt_out_size; |
| struct urb * interrupt_out_urb; |
| __u8 interrupt_out_endpointAddress; |
| |
| unsigned char * bulk_in_buffer; |
| int bulk_in_size; |
| struct urb * read_urb; |
| __u8 bulk_in_endpointAddress; |
| |
| unsigned char * bulk_out_buffer; |
| int bulk_out_size; |
| struct urb * write_urb; |
| int write_urb_busy; |
| __u8 bulk_out_endpointAddress; |
| |
| wait_queue_head_t write_wait; |
| struct work_struct work; |
| int open_count; |
| struct device dev; |
| }; |
| #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) |
| |
| /* get and set the port private data pointer helper functions */ |
| static inline void *usb_get_serial_port_data (struct usb_serial_port *port) |
| { |
| return dev_get_drvdata(&port->dev); |
| } |
| |
| static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data) |
| { |
| dev_set_drvdata(&port->dev, data); |
| } |
| |
| /** |
| * usb_serial - structure used by the usb-serial core for a device |
| * @dev: pointer to the struct usb_device for this device |
| * @type: pointer to the struct usb_serial_driver for this device |
| * @interface: pointer to the struct usb_interface for this device |
| * @minor: the starting minor number for this device |
| * @num_ports: the number of ports this device has |
| * @num_interrupt_in: number of interrupt in endpoints we have |
| * @num_interrupt_out: number of interrupt out endpoints we have |
| * @num_bulk_in: number of bulk in endpoints we have |
| * @num_bulk_out: number of bulk out endpoints we have |
| * @port: array of struct usb_serial_port structures for the different ports. |
| * @private: place to put any driver specific information that is needed. The |
| * usb-serial driver is required to manage this data, the usb-serial core |
| * will not touch this. Use usb_get_serial_data() and |
| * usb_set_serial_data() to access this. |
| */ |
| struct usb_serial { |
| struct usb_device * dev; |
| struct usb_serial_driver * type; |
| struct usb_interface * interface; |
| unsigned char minor; |
| unsigned char num_ports; |
| unsigned char num_port_pointers; |
| char num_interrupt_in; |
| char num_interrupt_out; |
| char num_bulk_in; |
| char num_bulk_out; |
| struct usb_serial_port * port[MAX_NUM_PORTS]; |
| struct kref kref; |
| void * private; |
| }; |
| #define to_usb_serial(d) container_of(d, struct usb_serial, kref) |
| |
| #define NUM_DONT_CARE (-1) |
| |
| /* get and set the serial private data pointer helper functions */ |
| static inline void *usb_get_serial_data (struct usb_serial *serial) |
| { |
| return serial->private; |
| } |
| |
| static inline void usb_set_serial_data (struct usb_serial *serial, void *data) |
| { |
| serial->private = data; |
| } |
| |
| /** |
| * usb_serial_driver - describes a usb serial driver |
| * @description: pointer to a string that describes this driver. This string used |
| * in the syslog messages when a device is inserted or removed. |
| * @id_table: pointer to a list of usb_device_id structures that define all |
| * of the devices this structure can support. |
| * @num_interrupt_in: the number of interrupt in endpoints this device will |
| * have. |
| * @num_interrupt_out: the number of interrupt out endpoints this device will |
| * have. |
| * @num_bulk_in: the number of bulk in endpoints this device will have. |
| * @num_bulk_out: the number of bulk out endpoints this device will have. |
| * @num_ports: the number of different ports this device will have. |
| * @calc_num_ports: pointer to a function to determine how many ports this |
| * device has dynamically. It will be called after the probe() |
| * callback is called, but before attach() |
| * @probe: pointer to the driver's probe function. |
| * This will be called when the device is inserted into the system, |
| * but before the device has been fully initialized by the usb_serial |
| * subsystem. Use this function to download any firmware to the device, |
| * or any other early initialization that might be needed. |
| * Return 0 to continue on with the initialization sequence. Anything |
| * else will abort it. |
| * @attach: pointer to the driver's attach function. |
| * This will be called when the struct usb_serial structure is fully set |
| * set up. Do any local initialization of the device, or any private |
| * memory structure allocation at this point in time. |
| * @shutdown: pointer to the driver's shutdown function. This will be |
| * called when the device is removed from the system. |
| * |
| * This structure is defines a USB Serial driver. It provides all of |
| * the information that the USB serial core code needs. If the function |
| * pointers are defined, then the USB serial core code will call them when |
| * the corresponding tty port functions are called. If they are not |
| * called, the generic serial function will be used instead. |
| * |
| * The driver.owner field should be set to the module owner of this driver. |
| * The driver.name field should be set to the name of this driver (remember |
| * it will show up in sysfs, so it needs to be short and to the point. |
| * Useing the module name is a good idea.) |
| */ |
| struct usb_serial_driver { |
| const char *description; |
| const struct usb_device_id *id_table; |
| char num_interrupt_in; |
| char num_interrupt_out; |
| char num_bulk_in; |
| char num_bulk_out; |
| char num_ports; |
| |
| struct list_head driver_list; |
| struct device_driver driver; |
| |
| int (*probe) (struct usb_serial *serial, const struct usb_device_id *id); |
| int (*attach) (struct usb_serial *serial); |
| int (*calc_num_ports) (struct usb_serial *serial); |
| |
| void (*shutdown) (struct usb_serial *serial); |
| |
| int (*port_probe) (struct usb_serial_port *port); |
| int (*port_remove) (struct usb_serial_port *port); |
| |
| /* serial function calls */ |
| int (*open) (struct usb_serial_port *port, struct file * filp); |
| void (*close) (struct usb_serial_port *port, struct file * filp); |
| int (*write) (struct usb_serial_port *port, const unsigned char *buf, int count); |
| int (*write_room) (struct usb_serial_port *port); |
| int (*ioctl) (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); |
| void (*set_termios) (struct usb_serial_port *port, struct termios * old); |
| void (*break_ctl) (struct usb_serial_port *port, int break_state); |
| int (*chars_in_buffer) (struct usb_serial_port *port); |
| void (*throttle) (struct usb_serial_port *port); |
| void (*unthrottle) (struct usb_serial_port *port); |
| int (*tiocmget) (struct usb_serial_port *port, struct file *file); |
| int (*tiocmset) (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); |
| |
| void (*read_int_callback)(struct urb *urb, struct pt_regs *regs); |
| void (*write_int_callback)(struct urb *urb, struct pt_regs *regs); |
| void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs); |
| void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs); |
| }; |
| #define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver) |
| |
| extern int usb_serial_register(struct usb_serial_driver *driver); |
| extern void usb_serial_deregister(struct usb_serial_driver *driver); |
| extern void usb_serial_port_softint(void *private); |
| |
| extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); |
| extern void usb_serial_disconnect(struct usb_interface *iface); |
| |
| extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest); |
| extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit); |
| |
| /* USB Serial console functions */ |
| #ifdef CONFIG_USB_SERIAL_CONSOLE |
| extern void usb_serial_console_init (int debug, int minor); |
| extern void usb_serial_console_exit (void); |
| #else |
| static inline void usb_serial_console_init (int debug, int minor) { } |
| static inline void usb_serial_console_exit (void) { } |
| #endif |
| |
| /* Functions needed by other parts of the usbserial core */ |
| extern struct usb_serial *usb_serial_get_by_index (unsigned int minor); |
| extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp); |
| extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count); |
| extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp); |
| extern int usb_serial_generic_write_room (struct usb_serial_port *port); |
| extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port); |
| extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs); |
| extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs); |
| extern void usb_serial_generic_shutdown (struct usb_serial *serial); |
| extern int usb_serial_generic_register (int debug); |
| extern void usb_serial_generic_deregister (void); |
| |
| extern int usb_serial_bus_register (struct usb_serial_driver *device); |
| extern void usb_serial_bus_deregister (struct usb_serial_driver *device); |
| |
| extern struct usb_serial_driver usb_serial_generic_device; |
| extern struct bus_type usb_serial_bus_type; |
| extern struct tty_driver *usb_serial_tty_driver; |
| |
| static inline void usb_serial_debug_data(int debug, |
| struct device *dev, |
| const char *function, int size, |
| const unsigned char *data) |
| { |
| int i; |
| |
| if (debug) { |
| dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size); |
| for (i = 0; i < size; ++i) |
| printk ("%.2x ", data[i]); |
| printk ("\n"); |
| } |
| } |
| |
| /* Use our own dbg macro */ |
| #undef dbg |
| #define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0) |
| |
| |
| |
| #endif /* ifdef __LINUX_USB_SERIAL_H */ |
| |