sky2: receive fill
Simplify receive buffer refill logic. Rather than trying to update
incrementally; do receive ring refill at end of receive processing.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index c8e51cf..b0950e1 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -65,7 +65,6 @@
#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
#define RX_DEF_PENDING RX_MAX_PENDING
#define RX_SKB_ALIGN 8
-#define RX_BUF_WRITE 16
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
@@ -1138,6 +1137,11 @@
return NULL;
}
+static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
+{
+ sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
+}
+
/*
* Allocate and setup receiver buffer pool.
* Normal case this ends up creating one list element for skb
@@ -1229,7 +1233,7 @@
}
/* Tell chip about available buffers */
- sky2_put_idx(hw, rxq, sky2->rx_put);
+ sky2_rx_update(sky2, rxq);
return 0;
nomem:
sky2_rx_clean(sky2);
@@ -2147,14 +2151,14 @@
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do)
{
- struct sky2_port *sky2;
int work_done = 0;
- unsigned buf_write[2] = { 0, 0 };
+ unsigned rx[2] = { 0, 0 };
u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
rmb();
while (hw->st_idx != hwidx) {
+ struct sky2_port *sky2;
struct sky2_status_le *le = hw->st_le + hw->st_idx;
unsigned port = le->css & CSS_LINK_BIT;
struct net_device *dev;
@@ -2171,10 +2175,11 @@
switch (le->opcode & ~HW_OWNER) {
case OP_RXSTAT:
+ ++rx[port];
skb = sky2_receive(dev, length, status);
if (unlikely(!skb)) {
sky2->net_stats.rx_dropped++;
- goto force_update;
+ break;
}
/* This chip reports checksum status differently */
@@ -2201,13 +2206,6 @@
#endif
netif_receive_skb(skb);
- /* Update receiver after 16 frames */
- if (++buf_write[port] == RX_BUF_WRITE) {
-force_update:
- sky2_put_idx(hw, rxqaddr[port], sky2->rx_put);
- buf_write[port] = 0;
- }
-
/* Stop after net poll weight */
if (++work_done >= to_do)
goto exit_loop;
@@ -2263,24 +2261,18 @@
if (net_ratelimit())
printk(KERN_WARNING PFX
"unknown status opcode 0x%x\n", le->opcode);
- goto exit_loop;
}
}
/* Fully processed status ring so clear irq */
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
- mmiowb();
exit_loop:
- if (buf_write[0]) {
- sky2 = netdev_priv(hw->dev[0]);
- sky2_put_idx(hw, Q_R1, sky2->rx_put);
- }
+ if (rx[0])
+ sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
- if (buf_write[1]) {
- sky2 = netdev_priv(hw->dev[1]);
- sky2_put_idx(hw, Q_R2, sky2->rx_put);
- }
+ if (rx[1])
+ sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
return work_done;
}