| /* |
| * arch/arm/mach-imx/mach-mx1ads.c |
| * |
| * Initially based on: |
| * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c |
| * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> |
| * |
| * 2004 (c) MontaVista Software, Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/i2c/pcf857x.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/mtd/physmap.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/time.h> |
| |
| #include <mach/common.h> |
| #include <mach/hardware.h> |
| #include <mach/iomux-mx1.h> |
| #include <mach/irqs.h> |
| |
| #include "devices-imx1.h" |
| |
| static const int mx1ads_pins[] __initconst = { |
| /* UART1 */ |
| PC9_PF_UART1_CTS, |
| PC10_PF_UART1_RTS, |
| PC11_PF_UART1_TXD, |
| PC12_PF_UART1_RXD, |
| /* UART2 */ |
| PB28_PF_UART2_CTS, |
| PB29_PF_UART2_RTS, |
| PB30_PF_UART2_TXD, |
| PB31_PF_UART2_RXD, |
| /* I2C */ |
| PA15_PF_I2C_SDA, |
| PA16_PF_I2C_SCL, |
| /* SPI */ |
| PC13_PF_SPI1_SPI_RDY, |
| PC14_PF_SPI1_SCLK, |
| PC15_PF_SPI1_SS, |
| PC16_PF_SPI1_MISO, |
| PC17_PF_SPI1_MOSI, |
| }; |
| |
| /* |
| * UARTs platform data |
| */ |
| |
| static const struct imxuart_platform_data uart0_pdata __initconst = { |
| .flags = IMXUART_HAVE_RTSCTS, |
| }; |
| |
| static const struct imxuart_platform_data uart1_pdata __initconst = { |
| .flags = IMXUART_HAVE_RTSCTS, |
| }; |
| |
| /* |
| * Physmap flash |
| */ |
| |
| static const struct physmap_flash_data mx1ads_flash_data __initconst = { |
| .width = 4, /* bankwidth in bytes */ |
| }; |
| |
| static const struct resource flash_resource __initconst = { |
| .start = MX1_CS0_PHYS, |
| .end = MX1_CS0_PHYS + SZ_32M - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| /* |
| * I2C |
| */ |
| static struct pcf857x_platform_data pcf857x_data[] = { |
| { |
| .gpio_base = 4 * 32, |
| }, { |
| .gpio_base = 4 * 32 + 16, |
| } |
| }; |
| |
| static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = { |
| .bitrate = 100000, |
| }; |
| |
| static struct i2c_board_info mx1ads_i2c_devices[] = { |
| { |
| I2C_BOARD_INFO("pcf8575", 0x22), |
| .platform_data = &pcf857x_data[0], |
| }, { |
| I2C_BOARD_INFO("pcf8575", 0x24), |
| .platform_data = &pcf857x_data[1], |
| }, |
| }; |
| |
| /* |
| * Board init |
| */ |
| static void __init mx1ads_init(void) |
| { |
| imx1_soc_init(); |
| |
| mxc_gpio_setup_multiple_pins(mx1ads_pins, |
| ARRAY_SIZE(mx1ads_pins), "mx1ads"); |
| |
| /* UART */ |
| imx1_add_imx_uart0(&uart0_pdata); |
| imx1_add_imx_uart1(&uart1_pdata); |
| |
| /* Physmap flash */ |
| platform_device_register_resndata(NULL, "physmap-flash", 0, |
| &flash_resource, 1, |
| &mx1ads_flash_data, sizeof(mx1ads_flash_data)); |
| |
| /* I2C */ |
| i2c_register_board_info(0, mx1ads_i2c_devices, |
| ARRAY_SIZE(mx1ads_i2c_devices)); |
| |
| imx1_add_imx_i2c(&mx1ads_i2c_data); |
| } |
| |
| static void __init mx1ads_timer_init(void) |
| { |
| mx1_clocks_init(32000); |
| } |
| |
| struct sys_timer mx1ads_timer = { |
| .init = mx1ads_timer_init, |
| }; |
| |
| MACHINE_START(MX1ADS, "Freescale MX1ADS") |
| /* Maintainer: Sascha Hauer, Pengutronix */ |
| .atag_offset = 0x100, |
| .map_io = mx1_map_io, |
| .init_early = imx1_init_early, |
| .init_irq = mx1_init_irq, |
| .handle_irq = imx1_handle_irq, |
| .timer = &mx1ads_timer, |
| .init_machine = mx1ads_init, |
| .restart = mxc_restart, |
| MACHINE_END |
| |
| MACHINE_START(MXLADS, "Freescale MXLADS") |
| .atag_offset = 0x100, |
| .map_io = mx1_map_io, |
| .init_early = imx1_init_early, |
| .init_irq = mx1_init_irq, |
| .handle_irq = imx1_handle_irq, |
| .timer = &mx1ads_timer, |
| .init_machine = mx1ads_init, |
| .restart = mxc_restart, |
| MACHINE_END |