Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux
Pull removal of GENERIC_GPIO from Grant Likely:
"GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any
valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
is possible to do so which has been causing confusion and breakage.
This branch does the work to completely eliminate GENERIC_GPIO."
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
gpio: update gpio Chinese documentation
Remove GENERIC_GPIO config option
Convert selectors of GENERIC_GPIO to GPIOLIB
blackfin: force use of gpiolib
m68k: coldfire: use gpiolib
mips: pnx833x: remove requirement for GENERIC_GPIO
openrisc: default GENERIC_GPIO to false
avr32: default GENERIC_GPIO to false
xtensa: remove explicit selection of GENERIC_GPIO
sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
powerpc: remove redundant GENERIC_GPIO selection
unicore32: default GENERIC_GPIO to false
unicore32: remove unneeded select GENERIC_GPIO
arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
arm: remove redundant GENERIC_GPIO selection
mips: alchemy: require gpiolib
mips: txx9: change GENERIC_GPIO to GPIOLIB
mips: loongson: use GPIO driver on CONFIG_GPIOLIB
mips: remove redundant GENERIC_GPIO select
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 5168a13..3297301 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -16,7 +16,7 @@
config EXTCON_GPIO
tristate "GPIO extcon support"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say Y here to enable GPIO based extcon support. Note that GPIO
extcon supports single state per extcon instance.
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c22eed9..87d5670 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -38,7 +38,6 @@
menuconfig GPIOLIB
bool "GPIO Support"
depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
- select GENERIC_GPIO
help
This enables GPIO support through the generic GPIO library.
You only need to enable this, if you also want to enable
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index dda6a75..90a80eb 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -255,7 +255,7 @@
}
/*
- * GENERIC_GPIO primitives.
+ * GPIO primitives.
*/
static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
unsigned pin)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index adfee98..631736e 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -363,7 +363,7 @@
config I2C_CBUS_GPIO
tristate "CBUS I2C driver"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Support for CBUS access using I2C API. Mostly relevant for Nokia
Internet Tablets (770, N800 and N810).
@@ -436,7 +436,7 @@
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select I2C_ALGOBIT
help
This is a very simple bitbanging I2C driver utilizing the
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 5faf244..f7f9865 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -7,7 +7,7 @@
config I2C_ARB_GPIO_CHALLENGE
tristate "GPIO-based I2C arbitration"
- depends on GENERIC_GPIO && OF
+ depends on GPIOLIB && OF
help
If you say yes to this option, support will be included for an
I2C multimaster arbitration scheme using GPIOs and a challenge &
@@ -19,7 +19,7 @@
config I2C_MUX_GPIO
tristate "GPIO-based I2C multiplexer"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
If you say yes to this option, support will be included for a
GPIO based I2C multiplexer. This driver provides access to
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 6a195d5..62a2c0e 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -175,7 +175,7 @@
config KEYBOARD_GPIO
tristate "GPIO Buttons"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
This driver implements support for buttons connected
to GPIO pins of various CPUs (and some other chips).
@@ -190,7 +190,7 @@
config KEYBOARD_GPIO_POLLED
tristate "Polled GPIO buttons"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_POLLDEV
help
This driver implements support for buttons connected
@@ -241,7 +241,7 @@
config KEYBOARD_MATRIX
tristate "GPIO driven matrix keypad support"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_MATRIXKMAP
help
Enable support for GPIO driven matrix keypad.
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index af80928..bb698e1 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,7 +214,7 @@
config INPUT_GP2A
tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
depends on I2C
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
hooked to an I2C bus.
@@ -224,7 +224,7 @@
config INPUT_GPIO_TILT_POLLED
tristate "Polled GPIO tilt switch"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_POLLDEV
help
This driver implements support for tilt switches connected
@@ -472,7 +472,7 @@
config INPUT_GPIO_ROTARY_ENCODER
tristate "Rotary encoders connected to GPIO pins"
- depends on GPIOLIB && GENERIC_GPIO
+ depends on GPIOLIB
help
Say Y here to add support for rotary encoders connected to GPIO lines.
Check file:Documentation/input/rotary-encoder.txt for more
@@ -484,7 +484,7 @@
config INPUT_RB532_BUTTON
tristate "Mikrotik Routerboard 532 button interface"
depends on MIKROTIK_RB532
- depends on GPIOLIB && GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_POLLDEV
help
Say Y here if you want support for the S1 button built into
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 802bd6a..effa9c5 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -295,7 +295,7 @@
config MOUSE_GPIO
tristate "GPIO mouse"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_POLLDEV
help
This driver simulates a mouse on GPIO lines of various CPUs (and some
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index d44806d..ef99229 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -173,7 +173,7 @@
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
depends on LEDS_CLASS
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
This option enables support for the LEDs connected to GPIO
outputs. To be useful the particular board must have LEDs
@@ -362,7 +362,7 @@
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
depends on LEDS_CLASS
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
This option enables support for LEDs driven by a Linear Technology
LT3593 controller. This controller uses a special one-wire pulse
@@ -431,7 +431,7 @@
config LEDS_RENESAS_TPU
bool "LED support for Renesas TPU"
- depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO
+ depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB
help
This option enables build of the LED TPU platform driver,
suitable to drive any TPU channel on newer Renesas SoCs.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 3ed17c4..c269383 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -419,7 +419,7 @@
config MTD_GPIO_ADDR
tristate "GPIO-assisted Flash Chip Support"
- depends on GENERIC_GPIO || GPIOLIB
+ depends on GPIOLIB
depends on MTD_COMPLEX_MAPPINGS
help
Map driver which allows flashes to be partially physically addressed
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 81bf5e5..5d54ad3 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -89,7 +89,7 @@
config MTD_NAND_GPIO
tristate "GPIO NAND Flash driver"
- depends on GENERIC_GPIO && ARM
+ depends on GPIOLIB && ARM
help
This enables a GPIO based NAND flash driver.
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 4503452..1e11f2b 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -126,7 +126,7 @@
config MDIO_GPIO
tristate "Support for GPIO lib-based bitbanged MDIO buses"
- depends on MDIO_BITBANG && GENERIC_GPIO
+ depends on MDIO_BITBANG && GPIOLIB
---help---
Supports GPIO lib-based MDIO busses.
diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index 0e1f99c..f8a2ae4 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -6,7 +6,7 @@
config PINCTRL_SH_PFC
# XXX move off the gpio dependency
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
select PINMUX
select PINCONF
@@ -40,19 +40,19 @@
config PINCTRL_PFC_SH7203
def_bool y
depends on CPU_SUBTYPE_SH7203
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7264
def_bool y
depends on CPU_SUBTYPE_SH7264
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7269
def_bool y
depends on CPU_SUBTYPE_SH7269
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7372
@@ -68,55 +68,55 @@
config PINCTRL_PFC_SH7720
def_bool y
depends on CPU_SUBTYPE_SH7720
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7722
def_bool y
depends on CPU_SUBTYPE_SH7722
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7723
def_bool y
depends on CPU_SUBTYPE_SH7723
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7724
def_bool y
depends on CPU_SUBTYPE_SH7724
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7734
def_bool y
depends on CPU_SUBTYPE_SH7734
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7757
def_bool y
depends on CPU_SUBTYPE_SH7757
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7785
def_bool y
depends on CPU_SUBTYPE_SH7785
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7786
def_bool y
depends on CPU_SUBTYPE_SH7786
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SHX3
def_bool y
depends on CPU_SUBTYPE_SHX3
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
endif
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a5d97ea..8bb2644 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -66,7 +66,7 @@
config REGULATOR_GPIO
tristate "GPIO regulator support"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
This driver provides support for regulators that can be
controlled via gpios.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 141d8c10..92a9345 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -62,7 +62,7 @@
config SPI_ATH79
tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
- depends on ATH79 && GENERIC_GPIO
+ depends on ATH79 && GPIOLIB
select SPI_BITBANG
help
This enables support for the SPI controller present on the
@@ -175,7 +175,7 @@
config SPI_GPIO
tristate "GPIO-based bitbanging SPI Master"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select SPI_BITBANG
help
This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
@@ -259,7 +259,7 @@
config SPI_OC_TINY
tristate "OpenCores tiny SPI"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select SPI_BITBANG
help
This is the driver for OpenCores tiny SPI master controller.
@@ -457,7 +457,7 @@
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
- depends on GENERIC_GPIO && CPU_TX49XX
+ depends on GPIOLIB && CPU_TX49XX
help
SPI driver for Toshiba TXx9 MIPS SoCs
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 9f61d46..c0c95be 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -54,7 +54,7 @@
config ANDROID_TIMED_GPIO
tristate "Android timed gpio driver"
- depends on GENERIC_GPIO && ANDROID_TIMED_OUTPUT
+ depends on GPIOLIB && ANDROID_TIMED_OUTPUT
default n
config ANDROID_LOW_MEMORY_KILLER
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
index e2e786d..ad45dfb 100644
--- a/drivers/staging/iio/accel/Kconfig
+++ b/drivers/staging/iio/accel/Kconfig
@@ -61,7 +61,7 @@
depends on SPI
select IIO_TRIGGER if IIO_BUFFER
depends on !IIO_BUFFER || IIO_KFIFO_BUF
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build SPI support for the ST microelectronics
accelerometer. The driver supplies direct access via sysfs files
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index d990829..cabc7a3 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -73,7 +73,7 @@
config AD7816
tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver"
depends on SPI
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Analog Devices AD7816/7/8
temperature sensors and ADC.
diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig
index 698a897..e6795e0 100644
--- a/drivers/staging/iio/addac/Kconfig
+++ b/drivers/staging/iio/addac/Kconfig
@@ -5,7 +5,7 @@
config ADT7316
tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318
and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC.
diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig
index 49f69ef..ce360f1 100644
--- a/drivers/staging/iio/resolver/Kconfig
+++ b/drivers/staging/iio/resolver/Kconfig
@@ -13,7 +13,7 @@
config AD2S1200
tristate "Analog Devices ad2s1200/ad2s1205 driver"
depends on SPI
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1200 and ad2s1205, provides direct access
@@ -22,7 +22,7 @@
config AD2S1210
tristate "Analog Devices ad2s1210 driver"
depends on SPI
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1210, provides direct access via sysfs.
diff --git a/drivers/staging/iio/trigger/Kconfig b/drivers/staging/iio/trigger/Kconfig
index d44d3ad..1a051da 100644
--- a/drivers/staging/iio/trigger/Kconfig
+++ b/drivers/staging/iio/trigger/Kconfig
@@ -14,7 +14,7 @@
config IIO_GPIO_TRIGGER
tristate "GPIO trigger"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Provides support for using GPIO pins as IIO triggers.
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index aab2ab2..371d0e7 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -128,7 +128,7 @@
config USB_GPIO_VBUS
tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Provides simple GPIO VBUS sensing for controllers with an
internal transceiver via the usb_phy interface, and
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index c04ccdf..1534cf3 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2483,7 +2483,7 @@
tristate "Solomon SSD1307 framebuffer support"
depends on FB && I2C
depends on OF
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select FB_SYS_FOPS
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 2e166c3..d5ab658 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -36,14 +36,14 @@
config LCD_L4F00242T03
tristate "Epson L4F00242T03 LCD"
- depends on SPI_MASTER && GENERIC_GPIO
+ depends on SPI_MASTER && GPIOLIB
help
SPI driver for Epson L4F00242T03. This provides basic support
for init and powering the LCD up/down through a sysfs interface.
config LCD_LMS283GF05
tristate "Samsung LMS283GF05 LCD"
- depends on SPI_MASTER && GENERIC_GPIO
+ depends on SPI_MASTER && GPIOLIB
help
SPI driver for Samsung LMS283GF05. This provides basic support
for powering the LCD up/down through a sysfs interface.
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index e8ca63a..2bd1257 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -50,7 +50,7 @@
config W1_MASTER_GPIO
tristate "GPIO 1-wire busmaster"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say Y here if you want to communicate with your 1-wire devices using
GPIO pins. This driver uses the GPIO API to control the wire.