V4L/DVB (6211): pvrusb2: Allocate a debug mask bit for reporting video standard things
It's useful to see specific details for how the pvrusb2 driver is
figuring out things related to the video standard, independent of
other initialization activities. So let's set up a separate debug
mask bit for this and turn it on.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/pvrusb2/pvrusb2-debug.h b/drivers/media/video/pvrusb2/pvrusb2-debug.h
index d95a858..da6441b 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-debug.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-debug.h
@@ -26,32 +26,33 @@
/* These are listed in *rough* order of decreasing usefulness and
increasing noise level. */
-#define PVR2_TRACE_INFO (1 << 0) // Normal messages
-#define PVR2_TRACE_ERROR_LEGS (1 << 1) // error messages
-#define PVR2_TRACE_TOLERANCE (1 << 2) // track tolerance-affected errors
-#define PVR2_TRACE_TRAP (1 << 3) // Trap & report misbehavior from app
-#define PVR2_TRACE_INIT (1 << 4) // misc initialization steps
-#define PVR2_TRACE_START_STOP (1 << 5) // Streaming start / stop
-#define PVR2_TRACE_CTL (1 << 6) // commit of control changes
-#define PVR2_TRACE_DEBUG (1 << 7) // Temporary debug code
-#define PVR2_TRACE_EEPROM (1 << 8) // eeprom parsing / report
-#define PVR2_TRACE_STRUCT (1 << 9) // internal struct creation
-#define PVR2_TRACE_OPEN_CLOSE (1 << 10) // application open / close
-#define PVR2_TRACE_CREG (1 << 11) // Main critical region entry / exit
-#define PVR2_TRACE_SYSFS (1 << 12) // Sysfs driven I/O
-#define PVR2_TRACE_FIRMWARE (1 << 13) // firmware upload actions
-#define PVR2_TRACE_CHIPS (1 << 14) // chip broadcast operation
-#define PVR2_TRACE_I2C (1 << 15) // I2C related stuff
-#define PVR2_TRACE_I2C_CMD (1 << 16) // Software commands to I2C modules
-#define PVR2_TRACE_I2C_CORE (1 << 17) // I2C core debugging
-#define PVR2_TRACE_I2C_TRAF (1 << 18) // I2C traffic through the adapter
-#define PVR2_TRACE_V4LIOCTL (1 << 19) // v4l ioctl details
-#define PVR2_TRACE_ENCODER (1 << 20) // mpeg2 encoder operation
-#define PVR2_TRACE_BUF_POOL (1 << 21) // Track buffer pool management
-#define PVR2_TRACE_BUF_FLOW (1 << 22) // Track buffer flow in system
-#define PVR2_TRACE_DATA_FLOW (1 << 23) // Track data flow
-#define PVR2_TRACE_DEBUGIFC (1 << 24) // Debug interface actions
-#define PVR2_TRACE_GPIO (1 << 25) // GPIO state bit changes
+#define PVR2_TRACE_INFO (1 << 0) /* Normal messages */
+#define PVR2_TRACE_ERROR_LEGS (1 << 1) /* error messages */
+#define PVR2_TRACE_TOLERANCE (1 << 2) /* track tolerance-affected errors */
+#define PVR2_TRACE_TRAP (1 << 3) /* Trap & report app misbehavior */
+#define PVR2_TRACE_STD (1 << 4) /* Log video standard stuff */
+#define PVR2_TRACE_INIT (1 << 5) /* misc initialization steps */
+#define PVR2_TRACE_START_STOP (1 << 6) /* Streaming start / stop */
+#define PVR2_TRACE_CTL (1 << 7) /* commit of control changes */
+#define PVR2_TRACE_DEBUG (1 << 8) /* Temporary debug code */
+#define PVR2_TRACE_EEPROM (1 << 9) /* eeprom parsing / report */
+#define PVR2_TRACE_STRUCT (1 << 10) /* internal struct creation */
+#define PVR2_TRACE_OPEN_CLOSE (1 << 11) /* application open / close */
+#define PVR2_TRACE_CREG (1 << 12) /* Main critical region entry / exit */
+#define PVR2_TRACE_SYSFS (1 << 13) /* Sysfs driven I/O */
+#define PVR2_TRACE_FIRMWARE (1 << 14) /* firmware upload actions */
+#define PVR2_TRACE_CHIPS (1 << 15) /* chip broadcast operation */
+#define PVR2_TRACE_I2C (1 << 16) /* I2C related stuff */
+#define PVR2_TRACE_I2C_CMD (1 << 17) /* Software commands to I2C modules */
+#define PVR2_TRACE_I2C_CORE (1 << 18) /* I2C core debugging */
+#define PVR2_TRACE_I2C_TRAF (1 << 19) /* I2C traffic through the adapter */
+#define PVR2_TRACE_V4LIOCTL (1 << 20) /* v4l ioctl details */
+#define PVR2_TRACE_ENCODER (1 << 21) /* mpeg2 encoder operation */
+#define PVR2_TRACE_BUF_POOL (1 << 22) /* Track buffer pool management */
+#define PVR2_TRACE_BUF_FLOW (1 << 23) /* Track buffer flow in system */
+#define PVR2_TRACE_DATA_FLOW (1 << 24) /* Track data flow */
+#define PVR2_TRACE_DEBUGIFC (1 << 25) /* Debug interface actions */
+#define PVR2_TRACE_GPIO (1 << 26) /* GPIO state bit changes */
#endif /* __PVRUSB2_HDW_INTERNAL_H */
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 20dc573..eec83d6 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -1741,7 +1741,7 @@
std1 = get_default_standard(hdw);
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom);
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Supported video standard(s) reported by eeprom: %.*s",
bcnt,buf);
@@ -1750,7 +1750,7 @@
std2 = std1 & ~hdw->std_mask_avail;
if (std2) {
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2);
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Expanding supported video standards"
" to include: %.*s",
bcnt,buf);
@@ -1761,7 +1761,7 @@
if (std1) {
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1);
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Initial video standard forced to %.*s",
bcnt,buf);
hdw->std_mask_cur = std1;
@@ -1781,7 +1781,7 @@
hdw->std_mask_eeprom)) continue;
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),
std_eeprom_maps[idx].std);
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Initial video standard guessed as %.*s",
bcnt,buf);
hdw->std_mask_cur = std_eeprom_maps[idx].std;
@@ -1796,7 +1796,7 @@
hdw->std_enum_cur = 1;
hdw->std_mask_cur = hdw->std_defs[hdw->std_enum_cur-1].id;
hdw->std_dirty = !0;
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Initial video standard auto-selected to %s",
hdw->std_defs[hdw->std_enum_cur-1].name);
return;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index 1ea0939..ca9e278 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -41,6 +41,7 @@
#define DEFAULT_DEBUG_MASK (PVR2_TRACE_ERROR_LEGS| \
PVR2_TRACE_INFO| \
+ PVR2_TRACE_STD| \
PVR2_TRACE_TOLERANCE| \
PVR2_TRACE_TRAP| \
0)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-std.c b/drivers/media/video/pvrusb2/pvrusb2-std.c
index 81de26b..63e55bb 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-std.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-std.c
@@ -298,7 +298,7 @@
std->id = id;
bcnt = pvr2_std_id_to_str(std->name,sizeof(std->name)-1,id);
std->name[bcnt] = 0;
- pvr2_trace(PVR2_TRACE_INIT,"Set up standard idx=%u name=%s",
+ pvr2_trace(PVR2_TRACE_STD,"Set up standard idx=%u name=%s",
std->index,std->name);
return !0;
}
@@ -320,11 +320,11 @@
v4l2_std_id idmsk,cmsk,fmsk;
struct v4l2_standard *stddefs;
- if (pvrusb2_debug & PVR2_TRACE_INIT) {
+ if (pvrusb2_debug & PVR2_TRACE_STD) {
char buf[50];
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),id);
pvr2_trace(
- PVR2_TRACE_INIT,"Mapping standards mask=0x%x (%.*s)",
+ PVR2_TRACE_STD,"Mapping standards mask=0x%x (%.*s)",
(int)id,bcnt,buf);
}
@@ -355,7 +355,7 @@
bcnt,buf);
}
- pvr2_trace(PVR2_TRACE_INIT,"Setting up %u unique standard(s)",
+ pvr2_trace(PVR2_TRACE_STD,"Setting up %u unique standard(s)",
std_cnt);
if (!std_cnt) return NULL; // paranoia