| /* |
| * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| aliases { |
| display0 = &hdmi0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_led_pins>; |
| |
| led0 { |
| label = "var:green:led0"; |
| gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */ |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| led1 { |
| label = "var:green:led1"; |
| gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */ |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_key_pins>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| user-key@184 { |
| label = "user"; |
| gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */ |
| linux,code = <BTN_EXTRA>; |
| wakeup-source; |
| }; |
| }; |
| |
| hdmi0: connector { |
| compatible = "hdmi-connector"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_hpd_pins>; |
| label = "hdmi"; |
| type = "a"; |
| |
| hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ |
| |
| port { |
| hdmi_connector_in: endpoint { |
| remote-endpoint = <&hdmi_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &omap4_pmx_core { |
| uart1_pins: pinmux_uart1_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi1_cs2.uart1_cts */ |
| OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1) /* mcspi1_cs3.uart1_rts */ |
| OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1) /* i2c2_scl.uart1_rx */ |
| OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1) /* i2c2_sda.uart1_tx */ |
| >; |
| }; |
| |
| mcspi1_pins: pinmux_mcspi1_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ |
| OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ |
| OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ |
| OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ |
| >; |
| }; |
| |
| mcasp_pins: pinmux_mcsasp_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2) /* mcbsp2_dr.abe_mcasp_axr */ |
| >; |
| }; |
| |
| dss_dpi_pins: pinmux_dss_dpi_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ |
| OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ |
| OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ |
| OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ |
| OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ |
| OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ |
| OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ |
| OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ |
| OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ |
| OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ |
| OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ |
| OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ |
| OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ |
| OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ |
| OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ |
| OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ |
| OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ |
| OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ |
| OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ |
| OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ |
| OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ |
| OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ |
| OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ |
| OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ |
| OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ |
| OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ |
| OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ |
| OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ |
| >; |
| }; |
| |
| dss_hdmi_pins: pinmux_dss_hdmi_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ |
| OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ |
| OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ |
| >; |
| }; |
| |
| i2c4_pins: pinmux_i2c4_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
| OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ |
| >; |
| }; |
| |
| mmc5_pins: pinmux_mmc5_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3) /* abe_mcbsp2_clkx.gpio_110 */ |
| OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ |
| OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ |
| OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ |
| OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ |
| OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ |
| OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ |
| >; |
| }; |
| |
| gpio_led_pins: pinmux_gpio_led_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3) /* kpd_col4.gpio_172 */ |
| OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */ |
| >; |
| }; |
| |
| gpio_key_pins: pinmux_gpio_key_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3) /* sys_boot0.gpio_184 */ |
| >; |
| }; |
| |
| ks8851_irq_pins: pinmux_ks8851_irq_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3) /* kpd_col3.gpio_171 */ |
| >; |
| }; |
| |
| hdmi_hpd_pins: pinmux_hdmi_hpd_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ |
| >; |
| }; |
| |
| backlight_pins: pinmux_backlight_pins { |
| pinctrl-single,pins = < |
| OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ |
| >; |
| }; |
| }; |
| |
| &i2c4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_pins>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pins>; |
| status = "okay"; |
| }; |
| |
| &mcspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcspi1_pins>; |
| status = "okay"; |
| |
| eth@0 { |
| compatible = "ks8851"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ks8851_irq_pins>; |
| spi-max-frequency = <24000000>; |
| reg = <0>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */ |
| }; |
| }; |
| |
| &mmc5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc5_pins>; |
| vmmc-supply = <&vbat>; |
| bus-width = <4>; |
| cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */ |
| status = "okay"; |
| }; |
| |
| &dss { |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dss_hdmi_pins>; |
| vdda-supply = <&vdac>; |
| |
| port { |
| hdmi_out: endpoint { |
| remote-endpoint = <&hdmi_connector_in>; |
| }; |
| }; |
| }; |