| /* |
| * Copyright (C) 2015, 2016 Zodiac Inflight Innovations |
| * |
| * Based on an original 'vf610-twr.dts' which is Copyright 2015, |
| * Freescale Semiconductor, Inc. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| #include "vf610.dtsi" |
| |
| / { |
| model = "ZII VF610 Development Board, Rev B"; |
| compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| reg = <0x80000000 0x20000000>; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pinctrl_leds_debug>; |
| pinctrl-names = "default"; |
| |
| debug { |
| label = "zii:green:debug1"; |
| gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| mdio-mux { |
| compatible = "mdio-mux-gpio"; |
| pinctrl-0 = <&pinctrl_mdio_mux>; |
| pinctrl-names = "default"; |
| gpios = <&gpio0 8 GPIO_ACTIVE_HIGH |
| &gpio0 9 GPIO_ACTIVE_HIGH |
| &gpio0 24 GPIO_ACTIVE_HIGH |
| &gpio0 25 GPIO_ACTIVE_HIGH>; |
| mdio-parent-bus = <&mdio1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio_mux_1: mdio@1 { |
| reg = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| switch0: switch0@0 { |
| compatible = "marvell,mv88e6085"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| dsa,member = <0 0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| label = "lan0"; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| label = "lan1"; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| label = "lan2"; |
| }; |
| |
| switch0port5: port@5 { |
| reg = <5>; |
| label = "dsa"; |
| phy-mode = "rgmii-txid"; |
| link = <&switch1port6 |
| &switch2port9>; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| label = "cpu"; |
| ethernet = <&fec1>; |
| fixed-link { |
| speed = <100>; |
| full-duplex; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| mdio_mux_2: mdio@2 { |
| reg = <2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| switch1: switch1@0 { |
| compatible = "marvell,mv88e6085"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| dsa,member = <0 1>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| label = "lan3"; |
| phy-handle = <&switch1phy0>; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| label = "lan4"; |
| phy-handle = <&switch1phy1>; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| label = "lan5"; |
| phy-handle = <&switch1phy2>; |
| }; |
| |
| switch1port5: port@5 { |
| reg = <5>; |
| label = "dsa"; |
| link = <&switch2port9>; |
| phy-mode = "rgmii-txid"; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| switch1port6: port@6 { |
| reg = <6>; |
| label = "dsa"; |
| phy-mode = "rgmii-txid"; |
| link = <&switch0port5>; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| }; |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| switch1phy0: switch1phy0@0 { |
| reg = <0>; |
| }; |
| switch1phy1: switch1phy0@1 { |
| reg = <1>; |
| }; |
| switch1phy2: switch1phy0@2 { |
| reg = <2>; |
| }; |
| }; |
| }; |
| }; |
| |
| mdio_mux_4: mdio@4 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| |
| switch2: switch2@0 { |
| compatible = "marvell,mv88e6085"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| dsa,member = <0 2>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| label = "lan6"; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| label = "lan7"; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| label = "lan8"; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| label = "optical3"; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| link-gpios = <&gpio6 2 |
| GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| label = "optical4"; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| link-gpios = <&gpio6 3 |
| GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| switch2port9: port@9 { |
| reg = <9>; |
| label = "dsa"; |
| phy-mode = "rgmii-txid"; |
| link = <&switch1port5 |
| &switch0port5>; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| mdio_mux_8: mdio@8 { |
| reg = <8>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_3v3_mcu"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| usb0_vbus: regulator-usb0-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-0 = <&pinctrl_usb_vbus>; |
| regulator-name = "usb_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| gpio = <&gpio0 6 0>; |
| }; |
| |
| spi0 { |
| compatible = "spi-gpio"; |
| pinctrl-0 = <&pinctrl_gpio_spi0>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>; |
| gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| cs-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH |
| &gpio1 8 GPIO_ACTIVE_HIGH>; |
| num-chipselects = <2>; |
| |
| m25p128@0 { |
| compatible = "m25p128", "jedec,spi-nor"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| }; |
| |
| at93c46d@1 { |
| compatible = "atmel,at93c46d"; |
| pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>; |
| pinctrl-names = "default"; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| reg = <1>; |
| spi-max-frequency = <500000>; |
| spi-cs-high; |
| data-size = <16>; |
| select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| &adc0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_adc0_ad5>; |
| vref-supply = <®_vcc_3v3_mcu>; |
| status = "okay"; |
| }; |
| |
| &edma0 { |
| status = "okay"; |
| }; |
| |
| &esdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc1>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &fec0 { |
| phy-mode = "rmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec0>; |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| phy-mode = "rmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| status = "okay"; |
| |
| fixed-link { |
| speed = <100>; |
| full-duplex; |
| }; |
| |
| mdio1: mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| }; |
| }; |
| |
| &i2c0 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c0>; |
| status = "okay"; |
| |
| gpio5: pca9554@20 { |
| compatible = "nxp,pca9554"; |
| reg = <0x20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| }; |
| |
| gpio6: pca9554@22 { |
| compatible = "nxp,pca9554"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pca9554_22>; |
| reg = <0x22>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| lm75@48 { |
| compatible = "national,lm75"; |
| reg = <0x48>; |
| }; |
| |
| at24c04@50 { |
| compatible = "atmel,24c04"; |
| reg = <0x50>; |
| }; |
| |
| at24c04@52 { |
| compatible = "atmel,24c04"; |
| reg = <0x52>; |
| }; |
| |
| ds1682@6b { |
| compatible = "dallas,ds1682"; |
| reg = <0x6b>; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| tca9548@70 { |
| compatible = "nxp,pca9548"; |
| pinctrl-0 = <&pinctrl_i2c_mux_reset>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x70>; |
| reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; |
| |
| i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| sfp1: at24c04@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| sfp2: at24c04@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| sfp3: at24c04@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| sfp4: at24c04@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| i2c@4 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart0>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| &usbdev0 { |
| disable-over-current; |
| vbus-supply = <&usb0_vbus>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usbmisc0 { |
| status = "okay"; |
| }; |
| |
| &usbmisc1 { |
| status = "okay"; |
| }; |
| |
| &usbphy0 { |
| status = "okay"; |
| }; |
| |
| &usbphy1 { |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_adc0_ad5: adc0ad5grp { |
| fsl,pins = < |
| VF610_PAD_PTC30__ADC0_SE5 0x00a1 |
| >; |
| }; |
| |
| pinctrl_dspi0: dspi0grp { |
| fsl,pins = < |
| VF610_PAD_PTB18__DSPI0_CS1 0x1182 |
| VF610_PAD_PTB19__DSPI0_CS0 0x1182 |
| VF610_PAD_PTB20__DSPI0_SIN 0x1181 |
| VF610_PAD_PTB21__DSPI0_SOUT 0x1182 |
| VF610_PAD_PTB22__DSPI0_SCK 0x1182 |
| >; |
| }; |
| |
| pinctrl_dspi2: dspi2grp { |
| fsl,pins = < |
| VF610_PAD_PTD31__DSPI2_CS1 0x1182 |
| VF610_PAD_PTD30__DSPI2_CS0 0x1182 |
| VF610_PAD_PTD29__DSPI2_SIN 0x1181 |
| VF610_PAD_PTD28__DSPI2_SOUT 0x1182 |
| VF610_PAD_PTD27__DSPI2_SCK 0x1182 |
| >; |
| }; |
| |
| pinctrl_esdhc1: esdhc1grp { |
| fsl,pins = < |
| VF610_PAD_PTA24__ESDHC1_CLK 0x31ef |
| VF610_PAD_PTA25__ESDHC1_CMD 0x31ef |
| VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef |
| VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef |
| VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef |
| VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef |
| VF610_PAD_PTA7__GPIO_134 0x219d |
| >; |
| }; |
| |
| pinctrl_fec0: fec0grp { |
| fsl,pins = < |
| VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 |
| VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 |
| VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 |
| VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 |
| VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 |
| VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 |
| VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 |
| VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 |
| VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| VF610_PAD_PTA6__RMII_CLKIN 0x30d1 |
| VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 |
| VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 |
| VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 |
| VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 |
| VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 |
| VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 |
| VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 |
| VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 |
| VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 |
| >; |
| }; |
| |
| pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { |
| fsl,pins = < |
| VF610_PAD_PTE27__GPIO_132 0x33e2 |
| >; |
| }; |
| |
| pinctrl_gpio_spi0: pinctrl-gpio-spi0 { |
| fsl,pins = < |
| VF610_PAD_PTB22__GPIO_44 0x33e2 |
| VF610_PAD_PTB21__GPIO_43 0x33e2 |
| VF610_PAD_PTB20__GPIO_42 0x33e1 |
| VF610_PAD_PTB19__GPIO_41 0x33e2 |
| VF610_PAD_PTB18__GPIO_40 0x33e2 |
| >; |
| }; |
| |
| pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { |
| fsl,pins = < |
| VF610_PAD_PTE14__GPIO_119 0x31c2 |
| >; |
| }; |
| |
| pinctrl_i2c0: i2c0grp { |
| fsl,pins = < |
| VF610_PAD_PTB14__I2C0_SCL 0x37ff |
| VF610_PAD_PTB15__I2C0_SDA 0x37ff |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| VF610_PAD_PTB16__I2C1_SCL 0x37ff |
| VF610_PAD_PTB17__I2C1_SDA 0x37ff |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| VF610_PAD_PTA22__I2C2_SCL 0x37ff |
| VF610_PAD_PTA23__I2C2_SDA 0x37ff |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| VF610_PAD_PTA30__I2C3_SCL 0x37ff |
| VF610_PAD_PTA31__I2C3_SDA 0x37ff |
| >; |
| }; |
| |
| pinctrl_leds_debug: pinctrl-leds-debug { |
| fsl,pins = < |
| VF610_PAD_PTD20__GPIO_74 0x31c2 |
| >; |
| }; |
| |
| pinctrl_mdio_mux: pinctrl-mdio-mux { |
| fsl,pins = < |
| VF610_PAD_PTA18__GPIO_8 0x31c2 |
| VF610_PAD_PTA19__GPIO_9 0x31c2 |
| VF610_PAD_PTB2__GPIO_24 0x31c2 |
| VF610_PAD_PTB3__GPIO_25 0x31c2 |
| >; |
| }; |
| |
| pinctrl_pca9554_22: pinctrl-pca95540-22 { |
| fsl,pins = < |
| VF610_PAD_PTB28__GPIO_98 0x219d |
| >; |
| }; |
| |
| pinctrl_pwm0: pwm0grp { |
| fsl,pins = < |
| VF610_PAD_PTB0__FTM0_CH0 0x1582 |
| VF610_PAD_PTB1__FTM0_CH1 0x1582 |
| VF610_PAD_PTB2__FTM0_CH2 0x1582 |
| VF610_PAD_PTB3__FTM0_CH3 0x1582 |
| >; |
| }; |
| |
| pinctrl_qspi0: qspi0grp { |
| fsl,pins = < |
| VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 |
| VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff |
| VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 |
| VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 |
| VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 |
| VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 |
| >; |
| }; |
| |
| pinctrl_uart0: uart0grp { |
| fsl,pins = < |
| VF610_PAD_PTB10__UART0_TX 0x21a2 |
| VF610_PAD_PTB11__UART0_RX 0x21a1 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| VF610_PAD_PTB23__UART1_TX 0x21a2 |
| VF610_PAD_PTB24__UART1_RX 0x21a1 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| VF610_PAD_PTD0__UART2_TX 0x21a2 |
| VF610_PAD_PTD1__UART2_RX 0x21a1 |
| >; |
| }; |
| |
| pinctrl_usb_vbus: pinctrl-usb-vbus { |
| fsl,pins = < |
| VF610_PAD_PTA16__GPIO_6 0x31c2 |
| >; |
| }; |
| |
| pinctrl_usb0_host: usb0-host-grp { |
| fsl,pins = < |
| VF610_PAD_PTD6__GPIO_85 0x0062 |
| >; |
| }; |
| }; |