ide-{floppy,tape,scsi}: log device name instead of driver name
Log device name instead of driver name in *_pc_intr() and *_transfer_pc*().
While at it:
* Merge two consecutive printk()-s in *_pc_intr() together.
* Replace "floppy"/"tape"/"scsi" references in printk()-s by "device".
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index cc70e75..8f10211 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -776,8 +776,8 @@
debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
if (pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: I/O error in request"
- " sense command\n");
+ printk(KERN_ERR "%s: I/O error in request sense"
+ " command\n", drive->name);
return ide_do_reset(drive);
}
debug_log(DBG_ERR, "[cmd %x]: check condition\n",
@@ -805,8 +805,8 @@
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "ide-tape: The tape wants to issue more "
- "interrupts in DMA mode\n");
+ printk(KERN_ERR "%s: The device wants to issue more interrupts "
+ "in DMA mode\n", drive->name);
ide_dma_off(drive);
return ide_do_reset(drive);
}
@@ -817,14 +817,14 @@
ireason = hwif->INB(hwif->io_ports.nsect_addr);
if (ireason & CD) {
- printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
+ printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
return ide_do_reset(drive);
}
if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
/* Hopefully, we will never get here */
- printk(KERN_ERR "ide-tape: We wanted to %s, ",
- (ireason & IO) ? "Write" : "Read");
- printk(KERN_ERR "ide-tape: but the tape wants us to %s !\n",
+ printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
+ "to %s!\n", drive->name,
+ (ireason & IO) ? "Write" : "Read",
(ireason & IO) ? "Read" : "Write");
return ide_do_reset(drive);
}
@@ -833,15 +833,16 @@
temp = pc->xferred + bcount;
if (temp > pc->req_xfer) {
if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-tape: The tape wants to "
- "send us more data than expected "
- "- discarding data\n");
+ printk(KERN_ERR "%s: The device wants to send "
+ "us more data than expected - "
+ "discarding data\n",
+ drive->name);
ide_pad_transfer(drive, 0, bcount);
ide_set_handler(drive, &idetape_pc_intr,
IDETAPE_WAIT_CMD, NULL);
return ide_started;
}
- debug_log(DBG_SENSE, "The tape wants to send us more "
+ debug_log(DBG_SENSE, "The device wants to send us more "
"data than expected - allowing transfer\n");
}
iobuf = &idetape_input_buffers;
@@ -914,26 +915,27 @@
u8 ireason;
if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
- printk(KERN_ERR "ide-tape: Strange, packet command initiated "
- "yet DRQ isn't asserted\n");
+ printk(KERN_ERR "%s: Strange, packet command initiated yet "
+ "DRQ isn't asserted\n", drive->name);
return startstop;
}
ireason = hwif->INB(hwif->io_ports.nsect_addr);
while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
- printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing "
- "a packet command, retrying\n");
+ printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+ "a packet command, retrying\n", drive->name);
udelay(100);
ireason = hwif->INB(hwif->io_ports.nsect_addr);
if (retries == 0) {
- printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while "
- "issuing a packet command, ignoring\n");
+ printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+ "a packet command, ignoring\n",
+ drive->name);
ireason |= CD;
ireason &= ~IO;
}
}
if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing "
- "a packet command\n");
+ printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
+ "a packet command\n", drive->name);
return ide_do_reset(drive);
}
/* Set the interrupt routine */