hwmon: Add new combined driver for FSC chips
This patch adds a new merged driver for FSC sensor chips, it merges the fscher
and fscpos drivers and adds support for the FSC Scylla, Heracles and Heimdall
chips.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
new file mode 100644
index 0000000..63a4df0
--- /dev/null
+++ b/drivers/hwmon/fschmd.c
@@ -0,0 +1,778 @@
+/* fschmd.c
+ *
+ * Copyright (C) 2007 Hans de Goede <j.w.r.degoede@hhs.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes,
+ * Scylla, Heracles and Heimdall chips
+ *
+ * Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6
+ * (candidate) fschmd drivers:
+ * Copyright (C) 2006 Thilo Cestonaro
+ * <thilo.cestonaro.external@fujitsu-siemens.com>
+ * Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
+ * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
+ * Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
+ * Copyright (C) 2000 Hermann Jung <hej@odn.de>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd);
+
+/*
+ * The FSCHMD registers and other defines
+ */
+
+/* chip identification */
+#define FSCHMD_REG_IDENT_0 0x00
+#define FSCHMD_REG_IDENT_1 0x01
+#define FSCHMD_REG_IDENT_2 0x02
+#define FSCHMD_REG_REVISION 0x03
+
+/* global control and status */
+#define FSCHMD_REG_EVENT_STATE 0x04
+#define FSCHMD_REG_CONTROL 0x05
+
+#define FSCHMD_CONTROL_ALERT_LED_MASK 0x01
+
+/* watchdog (support to be implemented) */
+#define FSCHMD_REG_WDOG_PRESET 0x28
+#define FSCHMD_REG_WDOG_STATE 0x23
+#define FSCHMD_REG_WDOG_CONTROL 0x21
+
+/* voltages, weird order is to keep the same order as the old drivers */
+static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 };
+
+/* minimum pwm at which the fan is driven (pwm can by increased depending on
+ the temp. Notice that for the scy some fans share there minimum speed.
+ Also notice that with the scy the sensor order is different then with the
+ other chips, this order was in the 2.4 driver and kept for consistency. */
+static const u8 FSCHMD_REG_FAN_MIN[5][6] = {
+ { 0x55, 0x65 }, /* pos */
+ { 0x55, 0x65, 0xb5 }, /* her */
+ { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */
+ { 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */
+ { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */
+};
+
+/* actual fan speed */
+static const u8 FSCHMD_REG_FAN_ACT[5][6] = {
+ { 0x0e, 0x6b, 0xab }, /* pos */
+ { 0x0e, 0x6b, 0xbb }, /* her */
+ { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */
+ { 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */
+ { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */
+};
+
+/* fan status registers */
+static const u8 FSCHMD_REG_FAN_STATE[5][6] = {
+ { 0x0d, 0x62, 0xa2 }, /* pos */
+ { 0x0d, 0x62, 0xb2 }, /* her */
+ { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */
+ { 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */
+ { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */
+};
+
+/* fan ripple / divider registers */
+static const u8 FSCHMD_REG_FAN_RIPPLE[5][6] = {
+ { 0x0f, 0x6f, 0xaf }, /* pos */
+ { 0x0f, 0x6f, 0xbf }, /* her */
+ { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */
+ { 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */
+ { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */
+};
+
+static const int FSCHMD_NO_FAN_SENSORS[5] = { 3, 3, 6, 4, 5 };
+
+/* Fan status register bitmasks */
+#define FSCHMD_FAN_ALARM_MASK 0x04 /* called fault by FSC! */
+#define FSCHMD_FAN_NOT_PRESENT_MASK 0x08 /* not documented */
+
+
+/* actual temperature registers */
+static const u8 FSCHMD_REG_TEMP_ACT[5][5] = {
+ { 0x64, 0x32, 0x35 }, /* pos */
+ { 0x64, 0x32, 0x35 }, /* her */
+ { 0x64, 0xD0, 0x32, 0x35 }, /* scy */
+ { 0x64, 0x32, 0x35 }, /* hrc */
+ { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */
+};
+
+/* temperature state registers */
+static const u8 FSCHMD_REG_TEMP_STATE[5][5] = {
+ { 0x71, 0x81, 0x91 }, /* pos */
+ { 0x71, 0x81, 0x91 }, /* her */
+ { 0x71, 0xd1, 0x81, 0x91 }, /* scy */
+ { 0x71, 0x81, 0x91 }, /* hrc */
+ { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hmd */
+};
+
+/* temperature high limit registers, FSC does not document these. Proven to be
+ there with field testing on the fscher and fschrc, already supported / used
+ in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers
+ at these addresses, but doesn't want to confirm they are the same as with
+ the fscher?? */
+static const u8 FSCHMD_REG_TEMP_LIMIT[5][5] = {
+ { 0, 0, 0 }, /* pos */
+ { 0x76, 0x86, 0x96 }, /* her */
+ { 0x76, 0xd6, 0x86, 0x96 }, /* scy */
+ { 0x76, 0x86, 0x96 }, /* hrc */
+ { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hmd */
+};
+
+/* These were found through experimenting with an fscher, currently they are
+ not used, but we keep them around for future reference.
+static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 };
+static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */
+
+static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 };
+
+/* temp status register bitmasks */
+#define FSCHMD_TEMP_WORKING_MASK 0x01
+#define FSCHMD_TEMP_ALERT_MASK 0x02
+/* there only really is an alarm if the sensor is working and alert == 1 */
+#define FSCHMD_TEMP_ALARM_MASK \
+ (FSCHMD_TEMP_WORKING_MASK | FSCHMD_TEMP_ALERT_MASK)
+
+/* our driver name */
+#define FSCHMD_NAME "fschmd"
+
+/*
+ * Functions declarations
+ */
+
+static int fschmd_attach_adapter(struct i2c_adapter *adapter);
+static int fschmd_detach_client(struct i2c_client *client);
+static struct fschmd_data *fschmd_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver fschmd_driver = {
+ .driver = {
+ .name = FSCHMD_NAME,
+ },
+ .attach_adapter = fschmd_attach_adapter,
+ .detach_client = fschmd_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct fschmd_data {
+ struct i2c_client client;
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ int kind;
+ char valid; /* zero until following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+
+ /* register values */
+ u8 global_control; /* global control register */
+ u8 volt[3]; /* 12, 5, battery voltage */
+ u8 temp_act[5]; /* temperature */
+ u8 temp_status[5]; /* status of sensor */
+ u8 temp_max[5]; /* high temp limit, notice: undocumented! */
+ u8 fan_act[6]; /* fans revolutions per second */
+ u8 fan_status[6]; /* fan status */
+ u8 fan_min[6]; /* fan min value for rps */
+ u8 fan_ripple[6]; /* divider for rps */
+};
+
+/*
+ * Sysfs attr show / store functions
+ */
+
+static ssize_t show_in_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ const int max_reading[3] = { 14200, 6600, 3300 };
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ return sprintf(buf, "%d\n", (data->volt[index] *
+ max_reading[index] + 128) / 255);
+}
+
+
+#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
+
+static ssize_t show_temp_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index]));
+}
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
+}
+
+static ssize_t store_temp_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = dev_get_drvdata(dev);
+ long v = simple_strtol(buf, NULL, 10) / 1000;
+
+ v = SENSORS_LIMIT(v, -128, 127) + 128;
+
+ mutex_lock(&data->update_lock);
+ i2c_smbus_write_byte_data(&data->client,
+ FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
+ data->temp_max[index] = v;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_temp_fault(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ /* bit 0 set means sensor working ok, so no fault! */
+ if (data->temp_status[index] & FSCHMD_TEMP_WORKING_MASK)
+ return sprintf(buf, "0\n");
+ else
+ return sprintf(buf, "1\n");
+}
+
+static ssize_t show_temp_alarm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) ==
+ FSCHMD_TEMP_ALARM_MASK)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+
+#define RPM_FROM_REG(val) ((val) * 60)
+
+static ssize_t show_fan_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index]));
+}
+
+static ssize_t show_fan_div(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ /* bits 2..7 reserved => mask with 3 */
+ return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3));
+}
+
+static ssize_t store_fan_div(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ u8 reg;
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = dev_get_drvdata(dev);
+ /* supported values: 2, 4, 8 */
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+
+ switch (v) {
+ case 2: v = 1; break;
+ case 4: v = 2; break;
+ case 8: v = 3; break;
+ default:
+ dev_err(dev, "fan_div value %lu not supported. "
+ "Choose one of 2, 4 or 8!\n", v);
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->update_lock);
+
+ reg = i2c_smbus_read_byte_data(&data->client,
+ FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
+
+ /* bits 2..7 reserved => mask with 0x03 */
+ reg &= ~0x03;
+ reg |= v;
+
+ i2c_smbus_write_byte_data(&data->client,
+ FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
+
+ data->fan_ripple[index] = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_fan_alarm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ if (data->fan_status[index] & FSCHMD_FAN_ALARM_MASK)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_fan_fault(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT_MASK)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+
+static ssize_t show_pwm_auto_point1_pwm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ int val = fschmd_update_device(dev)->fan_min[index];
+
+ /* 0 = allow turning off, 1-255 = 50-100% */
+ if (val)
+ val = val / 2 + 128;
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t store_pwm_auto_point1_pwm(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = dev_get_drvdata(dev);
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+
+ /* register: 0 = allow turning off, 1-255 = 50-100% */
+ if (v) {
+ v = SENSORS_LIMIT(v, 128, 255);
+ v = (v - 128) * 2 + 1;
+ }
+
+ mutex_lock(&data->update_lock);
+
+ i2c_smbus_write_byte_data(&data->client,
+ FSCHMD_REG_FAN_MIN[data->kind][index], v);
+ data->fan_min[index] = v;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+
+/* The FSC hwmon family has the ability to force an attached alert led to flash
+ from software, we export this as an alert_led sysfs attr */
+static ssize_t show_alert_led(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ if (data->global_control & FSCHMD_CONTROL_ALERT_LED_MASK)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t store_alert_led(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
+{
+ u8 reg;
+ struct fschmd_data *data = dev_get_drvdata(dev);
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+
+ reg = i2c_smbus_read_byte_data(&data->client, FSCHMD_REG_CONTROL);
+
+ if (v)
+ reg |= FSCHMD_CONTROL_ALERT_LED_MASK;
+ else
+ reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK;
+
+ i2c_smbus_write_byte_data(&data->client, FSCHMD_REG_CONTROL, reg);
+
+ data->global_control = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static struct sensor_device_attribute fschmd_attr[] = {
+ SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0),
+ SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1),
+ SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2),
+ SENSOR_ATTR(alert_led, 0644, show_alert_led, store_alert_led, 0),
+};
+
+static struct sensor_device_attribute fschmd_temp_attr[] = {
+ SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
+ SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
+ SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0),
+ SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0),
+ SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
+ SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
+ SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1),
+ SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1),
+ SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2),
+ SENSOR_ATTR(temp3_max, 0644, show_temp_max, store_temp_max, 2),
+ SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2),
+ SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2),
+ SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3),
+ SENSOR_ATTR(temp4_max, 0644, show_temp_max, store_temp_max, 3),
+ SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3),
+ SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3),
+ SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4),
+ SENSOR_ATTR(temp5_max, 0644, show_temp_max, store_temp_max, 4),
+ SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4),
+ SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4),
+};
+
+static struct sensor_device_attribute fschmd_fan_attr[] = {
+ SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0),
+ SENSOR_ATTR(fan1_div, 0644, show_fan_div, store_fan_div, 0),
+ SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0),
+ SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0),
+ SENSOR_ATTR(pwm1_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 0),
+ SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1),
+ SENSOR_ATTR(fan2_div, 0644, show_fan_div, store_fan_div, 1),
+ SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1),
+ SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1),
+ SENSOR_ATTR(pwm2_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 1),
+ SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2),
+ SENSOR_ATTR(fan3_div, 0644, show_fan_div, store_fan_div, 2),
+ SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2),
+ SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2),
+ SENSOR_ATTR(pwm3_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 2),
+ SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3),
+ SENSOR_ATTR(fan4_div, 0644, show_fan_div, store_fan_div, 3),
+ SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3),
+ SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3),
+ SENSOR_ATTR(pwm4_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 3),
+ SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4),
+ SENSOR_ATTR(fan5_div, 0644, show_fan_div, store_fan_div, 4),
+ SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4),
+ SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4),
+ SENSOR_ATTR(pwm5_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 4),
+ SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5),
+ SENSOR_ATTR(fan6_div, 0644, show_fan_div, store_fan_div, 5),
+ SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5),
+ SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5),
+ SENSOR_ATTR(pwm6_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 5),
+};
+
+
+/*
+ * Real code
+ */
+
+static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct fschmd_data *data;
+ u8 revision;
+ const char * const names[5] = { "Poseidon", "Hermes", "Scylla",
+ "Heracles", "Heimdall" };
+ const char * const client_names[5] = { "fscpos", "fscher", "fscscy",
+ "fschrc", "fschmd" };
+ int i, err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return 0;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ * client structure, even though we cannot fill it completely yet.
+ * But it allows us to access i2c_smbus_read_byte_data. */
+ if (!(data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL)))
+ return -ENOMEM;
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &fschmd_driver;
+ mutex_init(&data->update_lock);
+
+ /* Detect & Identify the chip */
+ if (kind <= 0) {
+ char id[4];
+
+ id[0] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_IDENT_0);
+ id[1] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_IDENT_1);
+ id[2] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_IDENT_2);
+ id[3] = '\0';
+
+ if (!strcmp(id, "PEG"))
+ kind = fscpos;
+ else if (!strcmp(id, "HER"))
+ kind = fscher;
+ else if (!strcmp(id, "SCY"))
+ kind = fscscy;
+ else if (!strcmp(id, "HRC"))
+ kind = fschrc;
+ else if (!strcmp(id, "HMD"))
+ kind = fschmd;
+ else
+ goto exit_free;
+ }
+
+ if (kind == fscpos) {
+ /* The Poseidon has hardwired temp limits, fill these
+ in for the alarm resetting code */
+ data->temp_max[0] = 70 + 128;
+ data->temp_max[1] = 50 + 128;
+ data->temp_max[2] = 50 + 128;
+ }
+
+ /* i2c kind goes from 1-5, we want from 0-4 to address arrays */
+ data->kind = kind - 1;
+ strlcpy(client->name, client_names[data->kind], I2C_NAME_SIZE);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) {
+ err = device_create_file(&client->dev,
+ &fschmd_attr[i].dev_attr);
+ if (err)
+ goto exit_detach;
+ }
+
+ for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) {
+ /* Poseidon doesn't have TEMP_LIMIT registers */
+ if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show ==
+ show_temp_max)
+ continue;
+
+ err = device_create_file(&client->dev,
+ &fschmd_temp_attr[i].dev_attr);
+ if (err)
+ goto exit_detach;
+ }
+
+ for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) {
+ /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */
+ if (kind == fscpos &&
+ !strcmp(fschmd_fan_attr[i].dev_attr.attr.name,
+ "pwm3_auto_point1_pwm"))
+ continue;
+
+ err = device_create_file(&client->dev,
+ &fschmd_fan_attr[i].dev_attr);
+ if (err)
+ goto exit_detach;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ data->hwmon_dev = NULL;
+ goto exit_detach;
+ }
+
+ revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
+ printk(KERN_INFO FSCHMD_NAME ": Detected FSC %s chip, revision: %d\n",
+ names[data->kind], (int) revision);
+
+ return 0;
+
+exit_detach:
+ fschmd_detach_client(client); /* will also free data for us */
+ return err;
+
+exit_free:
+ kfree(data);
+ return err;
+}
+
+static int fschmd_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, fschmd_detect);
+}
+
+static int fschmd_detach_client(struct i2c_client *client)
+{
+ struct fschmd_data *data = i2c_get_clientdata(client);
+ int i, err;
+
+ /* Check if registered in case we're called from fschmd_detect
+ to cleanup after an error */
+ if (data->hwmon_dev)
+ hwmon_device_unregister(data->hwmon_dev);
+
+ for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++)
+ device_remove_file(&client->dev, &fschmd_attr[i].dev_attr);
+ for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++)
+ device_remove_file(&client->dev,
+ &fschmd_temp_attr[i].dev_attr);
+ for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++)
+ device_remove_file(&client->dev,
+ &fschmd_fan_attr[i].dev_attr);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
+ return 0;
+}
+
+static struct fschmd_data *fschmd_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct fschmd_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+
+ for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) {
+ data->temp_act[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_TEMP_ACT[data->kind][i]);
+ data->temp_status[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_TEMP_STATE[data->kind][i]);
+
+ /* The fscpos doesn't have TEMP_LIMIT registers */
+ if (FSCHMD_REG_TEMP_LIMIT[data->kind][i])
+ data->temp_max[i] = i2c_smbus_read_byte_data(
+ client,
+ FSCHMD_REG_TEMP_LIMIT[data->kind][i]);
+
+ /* reset alarm if the alarm condition is gone,
+ the chip doesn't do this itself */
+ if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) ==
+ FSCHMD_TEMP_ALARM_MASK &&
+ data->temp_act[i] < data->temp_max[i])
+ i2c_smbus_write_byte_data(client,
+ FSCHMD_REG_TEMP_STATE[data->kind][i],
+ FSCHMD_TEMP_ALERT_MASK);
+ }
+
+ for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) {
+ data->fan_act[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_FAN_ACT[data->kind][i]);
+ data->fan_status[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_FAN_STATE[data->kind][i]);
+ data->fan_ripple[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_FAN_RIPPLE[data->kind][i]);
+
+ /* The fscpos third fan doesn't have a fan_min */
+ if (FSCHMD_REG_FAN_MIN[data->kind][i])
+ data->fan_min[i] = i2c_smbus_read_byte_data(
+ client,
+ FSCHMD_REG_FAN_MIN[data->kind][i]);
+
+ /* reset fan status if speed is back to > 0 */
+ if ((data->fan_status[i] & FSCHMD_FAN_ALARM_MASK) &&
+ data->fan_act[i])
+ i2c_smbus_write_byte_data(client,
+ FSCHMD_REG_FAN_STATE[data->kind][i],
+ FSCHMD_FAN_ALARM_MASK);
+ }
+
+ for (i = 0; i < 3; i++)
+ data->volt[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_VOLT[i]);
+
+ data->global_control = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_CONTROL);
+
+ /* To be implemented in the future
+ data->watchdog[0] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_WDOG_PRESET);
+ data->watchdog[1] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_WDOG_STATE);
+ data->watchdog[2] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_WDOG_CONTROL); */
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int __init fschmd_init(void)
+{
+ return i2c_add_driver(&fschmd_driver);
+}
+
+static void __exit fschmd_exit(void)
+{
+ i2c_del_driver(&fschmd_driver);
+}
+
+MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>");
+MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles and "
+ "Heimdall driver");
+MODULE_LICENSE("GPL");
+
+module_init(fschmd_init);
+module_exit(fschmd_exit);