[PATCH] ipmi: fix panic ipmb response
The "null message handler" in the IPMI driver is used in startup and panic
situations to handle messages. It was only designed to work with messages
from the local management controller, but in some cases it was used to get
messages from remote managmenet controllers, and the system would then
panic. This patch makes the "null message handler" in the IPMI driver more
general so it works with any kind of message.
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 05293d0..d0ed252 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -219,7 +219,7 @@
interface comes in with a NULL user, call this routine with
it. Note that the message will still be freed by the
caller. This only works on the system interface. */
- void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_smi_msg *msg);
+ void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_recv_msg *msg);
/* When we are scanning the channels for an SMI, this will
tell which channel we are scanning. */
@@ -459,7 +459,27 @@
static void deliver_response(struct ipmi_recv_msg *msg)
{
- msg->user->handler->ipmi_recv_hndl(msg, msg->user->handler_data);
+ if (! msg->user) {
+ ipmi_smi_t intf = msg->user_msg_data;
+ unsigned long flags;
+
+ /* Special handling for NULL users. */
+ if (intf->null_user_handler) {
+ intf->null_user_handler(intf, msg);
+ spin_lock_irqsave(&intf->counter_lock, flags);
+ intf->handled_local_responses++;
+ spin_unlock_irqrestore(&intf->counter_lock, flags);
+ } else {
+ /* No handler, so give up. */
+ spin_lock_irqsave(&intf->counter_lock, flags);
+ intf->unhandled_local_responses++;
+ spin_unlock_irqrestore(&intf->counter_lock, flags);
+ }
+ ipmi_free_recv_msg(msg);
+ } else {
+ msg->user->handler->ipmi_recv_hndl(msg,
+ msg->user->handler_data);
+ }
}
/* Find the next sequence number not being used and add the given
@@ -1389,6 +1409,8 @@
unsigned char saddr, lun;
int rv;
+ if (! user)
+ return -EINVAL;
rv = check_addr(user->intf, addr, &saddr, &lun);
if (rv)
return rv;
@@ -1418,6 +1440,8 @@
unsigned char saddr, lun;
int rv;
+ if (! user)
+ return -EINVAL;
rv = check_addr(user->intf, addr, &saddr, &lun);
if (rv)
return rv;
@@ -1638,7 +1662,7 @@
(struct ipmi_addr *) &si,
0,
&msg,
- NULL,
+ intf,
NULL,
NULL,
0,
@@ -1648,19 +1672,20 @@
}
static void
-channel_handler(ipmi_smi_t intf, struct ipmi_smi_msg *msg)
+channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
{
int rv = 0;
int chan;
- if ((msg->rsp[0] == (IPMI_NETFN_APP_RESPONSE << 2))
- && (msg->rsp[1] == IPMI_GET_CHANNEL_INFO_CMD))
+ if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
+ && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE)
+ && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD))
{
/* It's the one we want */
- if (msg->rsp[2] != 0) {
+ if (msg->msg.data[0] != 0) {
/* Got an error from the channel, just go on. */
- if (msg->rsp[2] == IPMI_INVALID_COMMAND_ERR) {
+ if (msg->msg.data[0] == IPMI_INVALID_COMMAND_ERR) {
/* If the MC does not support this
command, that is legal. We just
assume it has one IPMB at channel
@@ -1677,13 +1702,13 @@
}
goto next_channel;
}
- if (msg->rsp_size < 6) {
+ if (msg->msg.data_len < 4) {
/* Message not big enough, just go on. */
goto next_channel;
}
chan = intf->curr_channel;
- intf->channels[chan].medium = msg->rsp[4] & 0x7f;
- intf->channels[chan].protocol = msg->rsp[5] & 0x1f;
+ intf->channels[chan].medium = msg->msg.data[2] & 0x7f;
+ intf->channels[chan].protocol = msg->msg.data[3] & 0x1f;
next_channel:
intf->curr_channel++;
@@ -2382,6 +2407,14 @@
unsigned long flags;
recv_msg = (struct ipmi_recv_msg *) msg->user_data;
+ if (recv_msg == NULL)
+ {
+ printk(KERN_WARNING"IPMI message received with no owner. This\n"
+ "could be because of a malformed message, or\n"
+ "because of a hardware error. Contact your\n"
+ "hardware vender for assistance\n");
+ return 0;
+ }
/* Make sure the user still exists. */
list_for_each_entry(user, &(intf->users), link) {
@@ -2392,19 +2425,11 @@
}
}
- if (!found) {
- /* Special handling for NULL users. */
- if (!recv_msg->user && intf->null_user_handler){
- intf->null_user_handler(intf, msg);
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->handled_local_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
- }else{
- /* The user for the message went away, so give up. */
- spin_lock_irqsave(&intf->counter_lock, flags);
- intf->unhandled_local_responses++;
- spin_unlock_irqrestore(&intf->counter_lock, flags);
- }
+ if ((! found) && recv_msg->user) {
+ /* The user for the message went away, so give up. */
+ spin_lock_irqsave(&intf->counter_lock, flags);
+ intf->unhandled_local_responses++;
+ spin_unlock_irqrestore(&intf->counter_lock, flags);
ipmi_free_recv_msg(recv_msg);
} else {
struct ipmi_system_interface_addr *smi_addr;
@@ -2890,28 +2915,30 @@
}
#ifdef CONFIG_IPMI_PANIC_STRING
-static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_smi_msg *msg)
+static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
{
- if ((msg->rsp[0] == (IPMI_NETFN_SENSOR_EVENT_RESPONSE << 2))
- && (msg->rsp[1] == IPMI_GET_EVENT_RECEIVER_CMD)
- && (msg->rsp[2] == IPMI_CC_NO_ERROR))
+ if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
+ && (msg->msg.netfn == IPMI_NETFN_SENSOR_EVENT_RESPONSE)
+ && (msg->msg.cmd == IPMI_GET_EVENT_RECEIVER_CMD)
+ && (msg->msg.data[0] == IPMI_CC_NO_ERROR))
{
/* A get event receiver command, save it. */
- intf->event_receiver = msg->rsp[3];
- intf->event_receiver_lun = msg->rsp[4] & 0x3;
+ intf->event_receiver = msg->msg.data[1];
+ intf->event_receiver_lun = msg->msg.data[2] & 0x3;
}
}
-static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_smi_msg *msg)
+static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg)
{
- if ((msg->rsp[0] == (IPMI_NETFN_APP_RESPONSE << 2))
- && (msg->rsp[1] == IPMI_GET_DEVICE_ID_CMD)
- && (msg->rsp[2] == IPMI_CC_NO_ERROR))
+ if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE)
+ && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE)
+ && (msg->msg.cmd == IPMI_GET_DEVICE_ID_CMD)
+ && (msg->msg.data[0] == IPMI_CC_NO_ERROR))
{
/* A get device id command, save if we are an event
receiver or generator. */
- intf->local_sel_device = (msg->rsp[8] >> 2) & 1;
- intf->local_event_generator = (msg->rsp[8] >> 5) & 1;
+ intf->local_sel_device = (msg->msg.data[6] >> 2) & 1;
+ intf->local_event_generator = (msg->msg.data[6] >> 5) & 1;
}
}
#endif
@@ -2967,7 +2994,7 @@
&addr,
0,
&msg,
- NULL,
+ intf,
&smi_msg,
&recv_msg,
0,
@@ -3013,7 +3040,7 @@
&addr,
0,
&msg,
- NULL,
+ intf,
&smi_msg,
&recv_msg,
0,
@@ -3033,7 +3060,7 @@
&addr,
0,
&msg,
- NULL,
+ intf,
&smi_msg,
&recv_msg,
0,
@@ -3095,7 +3122,7 @@
&addr,
0,
&msg,
- NULL,
+ intf,
&smi_msg,
&recv_msg,
0,
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index dd30ade..938d55b 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -242,7 +242,8 @@
/* The user_msg_data is the data supplied when a message was
sent, if this is a response to a sent message. If this is
not a response to a sent message, then user_msg_data will
- be NULL. */
+ be NULL. If the user above is NULL, then this will be the
+ intf. */
void *user_msg_data;
/* Call this when done with the message. It will presumably free