i40e: init code and hardware support
This patch implements the hardware specific init and management.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
CC: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
CC: e1000-devel@lists.sourceforge.net
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
new file mode 100644
index 0000000..0c524fa
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -0,0 +1,983 @@
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Driver
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+#include "i40e_status.h"
+#include "i40e_type.h"
+#include "i40e_register.h"
+#include "i40e_adminq.h"
+#include "i40e_prototype.h"
+
+/**
+ * i40e_adminq_init_regs - Initialize AdminQ registers
+ * @hw: pointer to the hardware structure
+ *
+ * This assumes the alloc_asq and alloc_arq functions have already been called
+ **/
+static void i40e_adminq_init_regs(struct i40e_hw *hw)
+{
+ /* set head and tail registers in our local struct */
+ if (hw->mac.type == I40E_MAC_VF) {
+ hw->aq.asq.tail = I40E_VF_ATQT1;
+ hw->aq.asq.head = I40E_VF_ATQH1;
+ hw->aq.arq.tail = I40E_VF_ARQT1;
+ hw->aq.arq.head = I40E_VF_ARQH1;
+ } else {
+ hw->aq.asq.tail = I40E_PF_ATQT;
+ hw->aq.asq.head = I40E_PF_ATQH;
+ hw->aq.arq.tail = I40E_PF_ARQT;
+ hw->aq.arq.head = I40E_PF_ARQH;
+ }
+}
+
+/**
+ * i40e_alloc_adminq_asq_ring - Allocate Admin Queue send rings
+ * @hw: pointer to the hardware structure
+ **/
+static i40e_status i40e_alloc_adminq_asq_ring(struct i40e_hw *hw)
+{
+ i40e_status ret_code;
+ struct i40e_virt_mem mem;
+
+ ret_code = i40e_allocate_dma_mem(hw, &hw->aq.asq_mem,
+ i40e_mem_atq_ring,
+ (hw->aq.num_asq_entries *
+ sizeof(struct i40e_aq_desc)),
+ I40E_ADMINQ_DESC_ALIGNMENT);
+ if (ret_code)
+ return ret_code;
+
+ hw->aq.asq.desc = hw->aq.asq_mem.va;
+ hw->aq.asq.dma_addr = hw->aq.asq_mem.pa;
+
+ ret_code = i40e_allocate_virt_mem(hw, &mem,
+ (hw->aq.num_asq_entries *
+ sizeof(struct i40e_asq_cmd_details)));
+ if (ret_code) {
+ i40e_free_dma_mem(hw, &hw->aq.asq_mem);
+ hw->aq.asq_mem.va = NULL;
+ hw->aq.asq_mem.pa = 0;
+ return ret_code;
+ }
+
+ hw->aq.asq.details = mem.va;
+
+ return ret_code;
+}
+
+/**
+ * i40e_alloc_adminq_arq_ring - Allocate Admin Queue receive rings
+ * @hw: pointer to the hardware structure
+ **/
+static i40e_status i40e_alloc_adminq_arq_ring(struct i40e_hw *hw)
+{
+ i40e_status ret_code;
+
+ ret_code = i40e_allocate_dma_mem(hw, &hw->aq.arq_mem,
+ i40e_mem_arq_ring,
+ (hw->aq.num_arq_entries *
+ sizeof(struct i40e_aq_desc)),
+ I40E_ADMINQ_DESC_ALIGNMENT);
+ if (ret_code)
+ return ret_code;
+
+ hw->aq.arq.desc = hw->aq.arq_mem.va;
+ hw->aq.arq.dma_addr = hw->aq.arq_mem.pa;
+
+ return ret_code;
+}
+
+/**
+ * i40e_free_adminq_asq - Free Admin Queue send rings
+ * @hw: pointer to the hardware structure
+ *
+ * This assumes the posted send buffers have already been cleaned
+ * and de-allocated
+ **/
+static void i40e_free_adminq_asq(struct i40e_hw *hw)
+{
+ struct i40e_virt_mem mem;
+
+ i40e_free_dma_mem(hw, &hw->aq.asq_mem);
+ hw->aq.asq_mem.va = NULL;
+ hw->aq.asq_mem.pa = 0;
+ mem.va = hw->aq.asq.details;
+ i40e_free_virt_mem(hw, &mem);
+ hw->aq.asq.details = NULL;
+}
+
+/**
+ * i40e_free_adminq_arq - Free Admin Queue receive rings
+ * @hw: pointer to the hardware structure
+ *
+ * This assumes the posted receive buffers have already been cleaned
+ * and de-allocated
+ **/
+static void i40e_free_adminq_arq(struct i40e_hw *hw)
+{
+ i40e_free_dma_mem(hw, &hw->aq.arq_mem);
+ hw->aq.arq_mem.va = NULL;
+ hw->aq.arq_mem.pa = 0;
+}
+
+/**
+ * i40e_alloc_arq_bufs - Allocate pre-posted buffers for the receive queue
+ * @hw: pointer to the hardware structure
+ **/
+static i40e_status i40e_alloc_arq_bufs(struct i40e_hw *hw)
+{
+ i40e_status ret_code;
+ struct i40e_aq_desc *desc;
+ struct i40e_virt_mem mem;
+ struct i40e_dma_mem *bi;
+ int i;
+
+ /* We'll be allocating the buffer info memory first, then we can
+ * allocate the mapped buffers for the event processing
+ */
+
+ /* buffer_info structures do not need alignment */
+ ret_code = i40e_allocate_virt_mem(hw, &mem, (hw->aq.num_arq_entries *
+ sizeof(struct i40e_dma_mem)));
+ if (ret_code)
+ goto alloc_arq_bufs;
+ hw->aq.arq.r.arq_bi = (struct i40e_dma_mem *)mem.va;
+
+ /* allocate the mapped buffers */
+ for (i = 0; i < hw->aq.num_arq_entries; i++) {
+ bi = &hw->aq.arq.r.arq_bi[i];
+ ret_code = i40e_allocate_dma_mem(hw, bi,
+ i40e_mem_arq_buf,
+ hw->aq.arq_buf_size,
+ I40E_ADMINQ_DESC_ALIGNMENT);
+ if (ret_code)
+ goto unwind_alloc_arq_bufs;
+
+ /* now configure the descriptors for use */
+ desc = I40E_ADMINQ_DESC(hw->aq.arq, i);
+
+ desc->flags = cpu_to_le16(I40E_AQ_FLAG_BUF);
+ if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
+ desc->flags |= cpu_to_le16(I40E_AQ_FLAG_LB);
+ desc->opcode = 0;
+ /* This is in accordance with Admin queue design, there is no
+ * register for buffer size configuration
+ */
+ desc->datalen = cpu_to_le16((u16)bi->size);
+ desc->retval = 0;
+ desc->cookie_high = 0;
+ desc->cookie_low = 0;
+ desc->params.external.addr_high =
+ cpu_to_le32(upper_32_bits(bi->pa));
+ desc->params.external.addr_low =
+ cpu_to_le32(lower_32_bits(bi->pa));
+ desc->params.external.param0 = 0;
+ desc->params.external.param1 = 0;
+ }
+
+alloc_arq_bufs:
+ return ret_code;
+
+unwind_alloc_arq_bufs:
+ /* don't try to free the one that failed... */
+ i--;
+ for (; i >= 0; i--)
+ i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
+ mem.va = hw->aq.arq.r.arq_bi;
+ i40e_free_virt_mem(hw, &mem);
+
+ return ret_code;
+}
+
+/**
+ * i40e_alloc_asq_bufs - Allocate empty buffer structs for the send queue
+ * @hw: pointer to the hardware structure
+ **/
+static i40e_status i40e_alloc_asq_bufs(struct i40e_hw *hw)
+{
+ i40e_status ret_code;
+ struct i40e_virt_mem mem;
+ struct i40e_dma_mem *bi;
+ int i;
+
+ /* No mapped memory needed yet, just the buffer info structures */
+ ret_code = i40e_allocate_virt_mem(hw, &mem, (hw->aq.num_asq_entries *
+ sizeof(struct i40e_dma_mem)));
+ if (ret_code)
+ goto alloc_asq_bufs;
+ hw->aq.asq.r.asq_bi = (struct i40e_dma_mem *)mem.va;
+
+ /* allocate the mapped buffers */
+ for (i = 0; i < hw->aq.num_asq_entries; i++) {
+ bi = &hw->aq.asq.r.asq_bi[i];
+ ret_code = i40e_allocate_dma_mem(hw, bi,
+ i40e_mem_asq_buf,
+ hw->aq.asq_buf_size,
+ I40E_ADMINQ_DESC_ALIGNMENT);
+ if (ret_code)
+ goto unwind_alloc_asq_bufs;
+ }
+alloc_asq_bufs:
+ return ret_code;
+
+unwind_alloc_asq_bufs:
+ /* don't try to free the one that failed... */
+ i--;
+ for (; i >= 0; i--)
+ i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
+ mem.va = hw->aq.asq.r.asq_bi;
+ i40e_free_virt_mem(hw, &mem);
+
+ return ret_code;
+}
+
+/**
+ * i40e_free_arq_bufs - Free receive queue buffer info elements
+ * @hw: pointer to the hardware structure
+ **/
+static void i40e_free_arq_bufs(struct i40e_hw *hw)
+{
+ struct i40e_virt_mem mem;
+ int i;
+
+ for (i = 0; i < hw->aq.num_arq_entries; i++)
+ i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
+
+ mem.va = hw->aq.arq.r.arq_bi;
+ i40e_free_virt_mem(hw, &mem);
+}
+
+/**
+ * i40e_free_asq_bufs - Free send queue buffer info elements
+ * @hw: pointer to the hardware structure
+ **/
+static void i40e_free_asq_bufs(struct i40e_hw *hw)
+{
+ struct i40e_virt_mem mem;
+ int i;
+
+ /* only unmap if the address is non-NULL */
+ for (i = 0; i < hw->aq.num_asq_entries; i++)
+ if (hw->aq.asq.r.asq_bi[i].pa)
+ i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
+
+ /* now free the buffer info list */
+ mem.va = hw->aq.asq.r.asq_bi;
+ i40e_free_virt_mem(hw, &mem);
+}
+
+/**
+ * i40e_config_asq_regs - configure ASQ registers
+ * @hw: pointer to the hardware structure
+ *
+ * Configure base address and length registers for the transmit queue
+ **/
+static void i40e_config_asq_regs(struct i40e_hw *hw)
+{
+ if (hw->mac.type == I40E_MAC_VF) {
+ /* configure the transmit queue */
+ wr32(hw, I40E_VF_ATQBAH1, upper_32_bits(hw->aq.asq.dma_addr));
+ wr32(hw, I40E_VF_ATQBAL1, lower_32_bits(hw->aq.asq.dma_addr));
+ wr32(hw, I40E_VF_ATQLEN1, (hw->aq.num_asq_entries |
+ I40E_VF_ATQLEN1_ATQENABLE_MASK));
+ } else {
+ /* configure the transmit queue */
+ wr32(hw, I40E_PF_ATQBAH, upper_32_bits(hw->aq.asq.dma_addr));
+ wr32(hw, I40E_PF_ATQBAL, lower_32_bits(hw->aq.asq.dma_addr));
+ wr32(hw, I40E_PF_ATQLEN, (hw->aq.num_asq_entries |
+ I40E_PF_ATQLEN_ATQENABLE_MASK));
+ }
+}
+
+/**
+ * i40e_config_arq_regs - ARQ register configuration
+ * @hw: pointer to the hardware structure
+ *
+ * Configure base address and length registers for the receive (event queue)
+ **/
+static void i40e_config_arq_regs(struct i40e_hw *hw)
+{
+ if (hw->mac.type == I40E_MAC_VF) {
+ /* configure the receive queue */
+ wr32(hw, I40E_VF_ARQBAH1, upper_32_bits(hw->aq.arq.dma_addr));
+ wr32(hw, I40E_VF_ARQBAL1, lower_32_bits(hw->aq.arq.dma_addr));
+ wr32(hw, I40E_VF_ARQLEN1, (hw->aq.num_arq_entries |
+ I40E_VF_ARQLEN1_ARQENABLE_MASK));
+ } else {
+ /* configure the receive queue */
+ wr32(hw, I40E_PF_ARQBAH, upper_32_bits(hw->aq.arq.dma_addr));
+ wr32(hw, I40E_PF_ARQBAL, lower_32_bits(hw->aq.arq.dma_addr));
+ wr32(hw, I40E_PF_ARQLEN, (hw->aq.num_arq_entries |
+ I40E_PF_ARQLEN_ARQENABLE_MASK));
+ }
+
+ /* Update tail in the HW to post pre-allocated buffers */
+ wr32(hw, hw->aq.arq.tail, hw->aq.num_arq_entries - 1);
+}
+
+/**
+ * i40e_init_asq - main initialization routine for ASQ
+ * @hw: pointer to the hardware structure
+ *
+ * This is the main initialization routine for the Admin Send Queue
+ * Prior to calling this function, drivers *MUST* set the following fields
+ * in the hw->aq structure:
+ * - hw->aq.num_asq_entries
+ * - hw->aq.arq_buf_size
+ *
+ * Do *NOT* hold the lock when calling this as the memory allocation routines
+ * called are not going to be atomic context safe
+ **/
+static i40e_status i40e_init_asq(struct i40e_hw *hw)
+{
+ i40e_status ret_code = 0;
+
+ if (hw->aq.asq.count > 0) {
+ /* queue already initialized */
+ ret_code = I40E_ERR_NOT_READY;
+ goto init_adminq_exit;
+ }
+
+ /* verify input for valid configuration */
+ if ((hw->aq.num_asq_entries == 0) ||
+ (hw->aq.asq_buf_size == 0)) {
+ ret_code = I40E_ERR_CONFIG;
+ goto init_adminq_exit;
+ }
+
+ hw->aq.asq.next_to_use = 0;
+ hw->aq.asq.next_to_clean = 0;
+ hw->aq.asq.count = hw->aq.num_asq_entries;
+
+ /* allocate the ring memory */
+ ret_code = i40e_alloc_adminq_asq_ring(hw);
+ if (ret_code)
+ goto init_adminq_exit;
+
+ /* allocate buffers in the rings */
+ ret_code = i40e_alloc_asq_bufs(hw);
+ if (ret_code)
+ goto init_adminq_free_rings;
+
+ /* initialize base registers */
+ i40e_config_asq_regs(hw);
+
+ /* success! */
+ goto init_adminq_exit;
+
+init_adminq_free_rings:
+ i40e_free_adminq_asq(hw);
+
+init_adminq_exit:
+ return ret_code;
+}
+
+/**
+ * i40e_init_arq - initialize ARQ
+ * @hw: pointer to the hardware structure
+ *
+ * The main initialization routine for the Admin Receive (Event) Queue.
+ * Prior to calling this function, drivers *MUST* set the following fields
+ * in the hw->aq structure:
+ * - hw->aq.num_asq_entries
+ * - hw->aq.arq_buf_size
+ *
+ * Do *NOT* hold the lock when calling this as the memory allocation routines
+ * called are not going to be atomic context safe
+ **/
+static i40e_status i40e_init_arq(struct i40e_hw *hw)
+{
+ i40e_status ret_code = 0;
+
+ if (hw->aq.arq.count > 0) {
+ /* queue already initialized */
+ ret_code = I40E_ERR_NOT_READY;
+ goto init_adminq_exit;
+ }
+
+ /* verify input for valid configuration */
+ if ((hw->aq.num_arq_entries == 0) ||
+ (hw->aq.arq_buf_size == 0)) {
+ ret_code = I40E_ERR_CONFIG;
+ goto init_adminq_exit;
+ }
+
+ hw->aq.arq.next_to_use = 0;
+ hw->aq.arq.next_to_clean = 0;
+ hw->aq.arq.count = hw->aq.num_arq_entries;
+
+ /* allocate the ring memory */
+ ret_code = i40e_alloc_adminq_arq_ring(hw);
+ if (ret_code)
+ goto init_adminq_exit;
+
+ /* allocate buffers in the rings */
+ ret_code = i40e_alloc_arq_bufs(hw);
+ if (ret_code)
+ goto init_adminq_free_rings;
+
+ /* initialize base registers */
+ i40e_config_arq_regs(hw);
+
+ /* success! */
+ goto init_adminq_exit;
+
+init_adminq_free_rings:
+ i40e_free_adminq_arq(hw);
+
+init_adminq_exit:
+ return ret_code;
+}
+
+/**
+ * i40e_shutdown_asq - shutdown the ASQ
+ * @hw: pointer to the hardware structure
+ *
+ * The main shutdown routine for the Admin Send Queue
+ **/
+static i40e_status i40e_shutdown_asq(struct i40e_hw *hw)
+{
+ i40e_status ret_code = 0;
+
+ if (hw->aq.asq.count == 0)
+ return I40E_ERR_NOT_READY;
+
+ /* Stop firmware AdminQ processing */
+ if (hw->mac.type == I40E_MAC_VF)
+ wr32(hw, I40E_VF_ATQLEN1, 0);
+ else
+ wr32(hw, I40E_PF_ATQLEN, 0);
+
+ /* make sure lock is available */
+ mutex_lock(&hw->aq.asq_mutex);
+
+ hw->aq.asq.count = 0; /* to indicate uninitialized queue */
+
+ /* free ring buffers */
+ i40e_free_asq_bufs(hw);
+ /* free the ring descriptors */
+ i40e_free_adminq_asq(hw);
+
+ mutex_unlock(&hw->aq.asq_mutex);
+
+ return ret_code;
+}
+
+/**
+ * i40e_shutdown_arq - shutdown ARQ
+ * @hw: pointer to the hardware structure
+ *
+ * The main shutdown routine for the Admin Receive Queue
+ **/
+static i40e_status i40e_shutdown_arq(struct i40e_hw *hw)
+{
+ i40e_status ret_code = 0;
+
+ if (hw->aq.arq.count == 0)
+ return I40E_ERR_NOT_READY;
+
+ /* Stop firmware AdminQ processing */
+ if (hw->mac.type == I40E_MAC_VF)
+ wr32(hw, I40E_VF_ARQLEN1, 0);
+ else
+ wr32(hw, I40E_PF_ARQLEN, 0);
+
+ /* make sure lock is available */
+ mutex_lock(&hw->aq.arq_mutex);
+
+ hw->aq.arq.count = 0; /* to indicate uninitialized queue */
+
+ /* free ring buffers */
+ i40e_free_arq_bufs(hw);
+ /* free the ring descriptors */
+ i40e_free_adminq_arq(hw);
+
+ mutex_unlock(&hw->aq.arq_mutex);
+
+ return ret_code;
+}
+
+/**
+ * i40e_init_adminq - main initialization routine for Admin Queue
+ * @hw: pointer to the hardware structure
+ *
+ * Prior to calling this function, drivers *MUST* set the following fields
+ * in the hw->aq structure:
+ * - hw->aq.num_asq_entries
+ * - hw->aq.num_arq_entries
+ * - hw->aq.arq_buf_size
+ * - hw->aq.asq_buf_size
+ **/
+i40e_status i40e_init_adminq(struct i40e_hw *hw)
+{
+ u16 eetrack_lo, eetrack_hi;
+ i40e_status ret_code;
+
+ /* verify input for valid configuration */
+ if ((hw->aq.num_arq_entries == 0) ||
+ (hw->aq.num_asq_entries == 0) ||
+ (hw->aq.arq_buf_size == 0) ||
+ (hw->aq.asq_buf_size == 0)) {
+ ret_code = I40E_ERR_CONFIG;
+ goto init_adminq_exit;
+ }
+
+ /* initialize locks */
+ mutex_init(&hw->aq.asq_mutex);
+ mutex_init(&hw->aq.arq_mutex);
+
+ /* Set up register offsets */
+ i40e_adminq_init_regs(hw);
+
+ /* allocate the ASQ */
+ ret_code = i40e_init_asq(hw);
+ if (ret_code)
+ goto init_adminq_destroy_locks;
+
+ /* allocate the ARQ */
+ ret_code = i40e_init_arq(hw);
+ if (ret_code)
+ goto init_adminq_free_asq;
+
+ ret_code = i40e_aq_get_firmware_version(hw,
+ &hw->aq.fw_maj_ver, &hw->aq.fw_min_ver,
+ &hw->aq.api_maj_ver, &hw->aq.api_min_ver,
+ NULL);
+ if (ret_code)
+ goto init_adminq_free_arq;
+
+ if (hw->aq.api_maj_ver != I40E_FW_API_VERSION_MAJOR ||
+ hw->aq.api_min_ver != I40E_FW_API_VERSION_MINOR) {
+ ret_code = I40E_ERR_FIRMWARE_API_VERSION;
+ goto init_adminq_free_arq;
+ }
+ i40e_read_nvm_word(hw, I40E_SR_NVM_IMAGE_VERSION, &hw->nvm.version);
+ i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_LO, &eetrack_lo);
+ i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_HI, &eetrack_hi);
+ hw->nvm.eetrack = (eetrack_hi << 16) | eetrack_lo;
+
+ ret_code = i40e_aq_set_hmc_resource_profile(hw,
+ I40E_HMC_PROFILE_DEFAULT,
+ 0,
+ NULL);
+ ret_code = 0;
+
+ /* success! */
+ goto init_adminq_exit;
+
+init_adminq_free_arq:
+ i40e_shutdown_arq(hw);
+init_adminq_free_asq:
+ i40e_shutdown_asq(hw);
+init_adminq_destroy_locks:
+
+init_adminq_exit:
+ return ret_code;
+}
+
+/**
+ * i40e_shutdown_adminq - shutdown routine for the Admin Queue
+ * @hw: pointer to the hardware structure
+ **/
+i40e_status i40e_shutdown_adminq(struct i40e_hw *hw)
+{
+ i40e_status ret_code = 0;
+
+ i40e_shutdown_asq(hw);
+ i40e_shutdown_arq(hw);
+
+ /* destroy the locks */
+
+ return ret_code;
+}
+
+/**
+ * i40e_clean_asq - cleans Admin send queue
+ * @asq: pointer to the adminq send ring
+ *
+ * returns the number of free desc
+ **/
+static u16 i40e_clean_asq(struct i40e_hw *hw)
+{
+ struct i40e_adminq_ring *asq = &(hw->aq.asq);
+ struct i40e_asq_cmd_details *details;
+ u16 ntc = asq->next_to_clean;
+ struct i40e_aq_desc desc_cb;
+ struct i40e_aq_desc *desc;
+
+ desc = I40E_ADMINQ_DESC(*asq, ntc);
+ details = I40E_ADMINQ_DETAILS(*asq, ntc);
+ while (rd32(hw, hw->aq.asq.head) != ntc) {
+ if (details->callback) {
+ I40E_ADMINQ_CALLBACK cb_func =
+ (I40E_ADMINQ_CALLBACK)details->callback;
+ desc_cb = *desc;
+ cb_func(hw, &desc_cb);
+ }
+ memset((void *)desc, 0, sizeof(struct i40e_aq_desc));
+ memset((void *)details, 0,
+ sizeof(struct i40e_asq_cmd_details));
+ ntc++;
+ if (ntc == asq->count)
+ ntc = 0;
+ desc = I40E_ADMINQ_DESC(*asq, ntc);
+ details = I40E_ADMINQ_DETAILS(*asq, ntc);
+ }
+
+ asq->next_to_clean = ntc;
+
+ return I40E_DESC_UNUSED(asq);
+}
+
+/**
+ * i40e_asq_done - check if FW has processed the Admin Send Queue
+ * @hw: pointer to the hw struct
+ *
+ * Returns true if the firmware has processed all descriptors on the
+ * admin send queue. Returns false if there are still requests pending.
+ **/
+bool i40e_asq_done(struct i40e_hw *hw)
+{
+ /* AQ designers suggest use of head for better
+ * timing reliability than DD bit
+ */
+ return (rd32(hw, hw->aq.asq.head) == hw->aq.asq.next_to_use);
+
+}
+
+/**
+ * i40e_asq_send_command - send command to Admin Queue
+ * @hw: pointer to the hw struct
+ * @desc: prefilled descriptor describing the command (non DMA mem)
+ * @buff: buffer to use for indirect commands
+ * @buff_size: size of buffer for indirect commands
+ * @opaque: pointer to info to be used in async cleanup
+ *
+ * This is the main send command driver routine for the Admin Queue send
+ * queue. It runs the queue, cleans the queue, etc
+ **/
+i40e_status i40e_asq_send_command(struct i40e_hw *hw,
+ struct i40e_aq_desc *desc,
+ void *buff, /* can be NULL */
+ u16 buff_size,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ i40e_status status = 0;
+ struct i40e_dma_mem *dma_buff = NULL;
+ struct i40e_asq_cmd_details *details;
+ struct i40e_aq_desc *desc_on_ring;
+ bool cmd_completed = false;
+ u16 retval = 0;
+
+ if (hw->aq.asq.count == 0) {
+ i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
+ "AQTX: Admin queue not initialized.\n");
+ status = I40E_ERR_QUEUE_EMPTY;
+ goto asq_send_command_exit;
+ }
+
+ details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
+ if (cmd_details) {
+ memcpy(details, cmd_details,
+ sizeof(struct i40e_asq_cmd_details));
+
+ /* If the cmd_details are defined copy the cookie. The
+ * cpu_to_le32 is not needed here because the data is ignored
+ * by the FW, only used by the driver
+ */
+ if (details->cookie) {
+ desc->cookie_high =
+ cpu_to_le32(upper_32_bits(details->cookie));
+ desc->cookie_low =
+ cpu_to_le32(lower_32_bits(details->cookie));
+ }
+ } else {
+ memset(details, 0, sizeof(struct i40e_asq_cmd_details));
+ }
+
+ /* clear requested flags and then set additional flags if defined */
+ desc->flags &= ~cpu_to_le16(details->flags_dis);
+ desc->flags |= cpu_to_le16(details->flags_ena);
+
+ mutex_lock(&hw->aq.asq_mutex);
+
+ if (buff_size > hw->aq.asq_buf_size) {
+ i40e_debug(hw,
+ I40E_DEBUG_AQ_MESSAGE,
+ "AQTX: Invalid buffer size: %d.\n",
+ buff_size);
+ status = I40E_ERR_INVALID_SIZE;
+ goto asq_send_command_error;
+ }
+
+ if (details->postpone && !details->async) {
+ i40e_debug(hw,
+ I40E_DEBUG_AQ_MESSAGE,
+ "AQTX: Async flag not set along with postpone flag");
+ status = I40E_ERR_PARAM;
+ goto asq_send_command_error;
+ }
+
+ /* call clean and check queue available function to reclaim the
+ * descriptors that were processed by FW, the function returns the
+ * number of desc available
+ */
+ /* the clean function called here could be called in a separate thread
+ * in case of asynchronous completions
+ */
+ if (i40e_clean_asq(hw) == 0) {
+ i40e_debug(hw,
+ I40E_DEBUG_AQ_MESSAGE,
+ "AQTX: Error queue is full.\n");
+ status = I40E_ERR_ADMIN_QUEUE_FULL;
+ goto asq_send_command_error;
+ }
+
+ /* initialize the temp desc pointer with the right desc */
+ desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);
+
+ /* if the desc is available copy the temp desc to the right place */
+ memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc));
+
+ /* if buff is not NULL assume indirect command */
+ if (buff != NULL) {
+ dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]);
+ /* copy the user buff into the respective DMA buff */
+ memcpy(dma_buff->va, buff, buff_size);
+ desc_on_ring->datalen = cpu_to_le16(buff_size);
+
+ /* Update the address values in the desc with the pa value
+ * for respective buffer
+ */
+ desc_on_ring->params.external.addr_high =
+ cpu_to_le32(upper_32_bits(dma_buff->pa));
+ desc_on_ring->params.external.addr_low =
+ cpu_to_le32(lower_32_bits(dma_buff->pa));
+ }
+
+ /* bump the tail */
+ i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring, buff);
+ (hw->aq.asq.next_to_use)++;
+ if (hw->aq.asq.next_to_use == hw->aq.asq.count)
+ hw->aq.asq.next_to_use = 0;
+ if (!details->postpone)
+ wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);
+
+ /* if cmd_details are not defined or async flag is not set,
+ * we need to wait for desc write back
+ */
+ if (!details->async && !details->postpone) {
+ u32 total_delay = 0;
+ u32 delay_len = 10;
+
+ do {
+ /* AQ designers suggest use of head for better
+ * timing reliability than DD bit
+ */
+ if (i40e_asq_done(hw))
+ break;
+ /* ugh! delay while spin_lock */
+ udelay(delay_len);
+ total_delay += delay_len;
+ } while (total_delay < I40E_ASQ_CMD_TIMEOUT);
+ }
+
+ /* if ready, copy the desc back to temp */
+ if (i40e_asq_done(hw)) {
+ memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc));
+ if (buff != NULL)
+ memcpy(buff, dma_buff->va, buff_size);
+ retval = le16_to_cpu(desc->retval);
+ if (retval != 0) {
+ i40e_debug(hw,
+ I40E_DEBUG_AQ_MESSAGE,
+ "AQTX: Command completed with error 0x%X.\n",
+ retval);
+ /* strip off FW internal code */
+ retval &= 0xff;
+ }
+ cmd_completed = true;
+ if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
+ status = 0;
+ else
+ status = I40E_ERR_ADMIN_QUEUE_ERROR;
+ hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
+ }
+
+ /* update the error if time out occurred */
+ if ((!cmd_completed) &&
+ (!details->async && !details->postpone)) {
+ i40e_debug(hw,
+ I40E_DEBUG_AQ_MESSAGE,
+ "AQTX: Writeback timeout.\n");
+ status = I40E_ERR_ADMIN_QUEUE_TIMEOUT;
+ }
+
+asq_send_command_error:
+ mutex_unlock(&hw->aq.asq_mutex);
+asq_send_command_exit:
+ return status;
+}
+
+/**
+ * i40e_fill_default_direct_cmd_desc - AQ descriptor helper function
+ * @desc: pointer to the temp descriptor (non DMA mem)
+ * @opcode: the opcode can be used to decide which flags to turn off or on
+ *
+ * Fill the desc with default values
+ **/
+void i40e_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc,
+ u16 opcode)
+{
+ /* zero out the desc */
+ memset((void *)desc, 0, sizeof(struct i40e_aq_desc));
+ desc->opcode = cpu_to_le16(opcode);
+ desc->flags = cpu_to_le16(I40E_AQ_FLAG_EI | I40E_AQ_FLAG_SI);
+}
+
+/**
+ * i40e_clean_arq_element
+ * @hw: pointer to the hw struct
+ * @e: event info from the receive descriptor, includes any buffers
+ * @pending: number of events that could be left to process
+ *
+ * This function cleans one Admin Receive Queue element and returns
+ * the contents through e. It can also return how many events are
+ * left to process through 'pending'
+ **/
+i40e_status i40e_clean_arq_element(struct i40e_hw *hw,
+ struct i40e_arq_event_info *e,
+ u16 *pending)
+{
+ i40e_status ret_code = 0;
+ u16 ntc = hw->aq.arq.next_to_clean;
+ struct i40e_aq_desc *desc;
+ struct i40e_dma_mem *bi;
+ u16 desc_idx;
+ u16 datalen;
+ u16 flags;
+ u16 ntu;
+
+ /* take the lock before we start messing with the ring */
+ mutex_lock(&hw->aq.arq_mutex);
+
+ /* set next_to_use to head */
+ ntu = (rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK);
+ if (ntu == ntc) {
+ /* nothing to do - shouldn't need to update ring's values */
+ i40e_debug(hw,
+ I40E_DEBUG_AQ_MESSAGE,
+ "AQRX: Queue is empty.\n");
+ ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK;
+ goto clean_arq_element_out;
+ }
+
+ /* now clean the next descriptor */
+ desc = I40E_ADMINQ_DESC(hw->aq.arq, ntc);
+ desc_idx = ntc;
+ i40e_debug_aq(hw,
+ I40E_DEBUG_AQ_COMMAND,
+ (void *)desc,
+ hw->aq.arq.r.arq_bi[desc_idx].va);
+
+ flags = le16_to_cpu(desc->flags);
+ if (flags & I40E_AQ_FLAG_ERR) {
+ ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
+ hw->aq.arq_last_status =
+ (enum i40e_admin_queue_err)le16_to_cpu(desc->retval);
+ i40e_debug(hw,
+ I40E_DEBUG_AQ_MESSAGE,
+ "AQRX: Event received with error 0x%X.\n",
+ hw->aq.arq_last_status);
+ } else {
+ memcpy(&e->desc, desc, sizeof(struct i40e_aq_desc));
+ datalen = le16_to_cpu(desc->datalen);
+ e->msg_size = min(datalen, e->msg_size);
+ if (e->msg_buf != NULL && (e->msg_size != 0))
+ memcpy(e->msg_buf, hw->aq.arq.r.arq_bi[desc_idx].va,
+ e->msg_size);
+ }
+
+ /* Restore the original datalen and buffer address in the desc,
+ * FW updates datalen to indicate the event message
+ * size
+ */
+ bi = &hw->aq.arq.r.arq_bi[ntc];
+ desc->datalen = cpu_to_le16((u16)bi->size);
+ desc->params.external.addr_high = cpu_to_le32(upper_32_bits(bi->pa));
+ desc->params.external.addr_low = cpu_to_le32(lower_32_bits(bi->pa));
+
+ /* set tail = the last cleaned desc index. */
+ wr32(hw, hw->aq.arq.tail, ntc);
+ /* ntc is updated to tail + 1 */
+ ntc++;
+ if (ntc == hw->aq.num_arq_entries)
+ ntc = 0;
+ hw->aq.arq.next_to_clean = ntc;
+ hw->aq.arq.next_to_use = ntu;
+
+clean_arq_element_out:
+ /* Set pending if needed, unlock and return */
+ if (pending != NULL)
+ *pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
+ mutex_unlock(&hw->aq.arq_mutex);
+
+ return ret_code;
+}
+
+void i40e_resume_aq(struct i40e_hw *hw)
+{
+ u32 reg = 0;
+
+ /* Registers are reset after PF reset */
+ hw->aq.asq.next_to_use = 0;
+ hw->aq.asq.next_to_clean = 0;
+
+ i40e_config_asq_regs(hw);
+ reg = hw->aq.num_asq_entries;
+
+ if (hw->mac.type == I40E_MAC_VF) {
+ reg |= I40E_VF_ATQLEN_ATQENABLE_MASK;
+ wr32(hw, I40E_VF_ATQLEN1, reg);
+ } else {
+ reg |= I40E_PF_ATQLEN_ATQENABLE_MASK;
+ wr32(hw, I40E_PF_ATQLEN, reg);
+ }
+
+ hw->aq.arq.next_to_use = 0;
+ hw->aq.arq.next_to_clean = 0;
+
+ i40e_config_arq_regs(hw);
+ reg = hw->aq.num_arq_entries;
+
+ if (hw->mac.type == I40E_MAC_VF) {
+ reg |= I40E_VF_ATQLEN_ATQENABLE_MASK;
+ wr32(hw, I40E_VF_ARQLEN1, reg);
+ } else {
+ reg |= I40E_PF_ATQLEN_ATQENABLE_MASK;
+ wr32(hw, I40E_PF_ARQLEN, reg);
+ }
+}