ARM: EXYNOS4: Use samsung_rev() to distinguish silicon revision
This patch uses samsung_rev() to support variable silicon revision of
EXYNOS4210 so that can support for EXYNOS4210 REV0, REV1.0 and REV1.1.
Note: Need to change timer setting on REV0.
Acked-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 2d8a40c..dbc358d 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -43,11 +43,6 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -120,6 +115,24 @@
},
};
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
static void exynos4_idle(void)
{
if (!need_resched())
@@ -137,6 +150,11 @@
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296d..7073ac7 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -23,7 +23,8 @@
#include <plat/map-s5p.h>
-#define EXYNOS4_PA_SYSRAM 0x02020000
+#define EXYNOS4_PA_SYSRAM0 0x02025000
+#define EXYNOS4_PA_SYSRAM1 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 7c2282c..96cc651 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -30,9 +30,12 @@
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
+#include <plat/cpu.h>
+
extern void exynos4_secondary_startup(void);
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM5 : S5P_VA_SYSRAM)
/*
* control for which core is the next to come out of the secondary
@@ -216,5 +219,6 @@
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
}