| #ifndef _RTL819XU_HTTYPE_H_ |
| #define _RTL819XU_HTTYPE_H_ |
| |
| //------------------------------------------------------------ |
| // The HT Capability element is present in beacons, association request, |
| // reassociation request and probe response frames |
| //------------------------------------------------------------ |
| |
| // |
| // Operation mode value |
| // |
| #define HT_OPMODE_NO_PROTECT 0 |
| #define HT_OPMODE_OPTIONAL 1 |
| #define HT_OPMODE_40MHZ_PROTECT 2 |
| #define HT_OPMODE_MIXED 3 |
| |
| // |
| // MIMO Power Save Setings |
| // |
| #define MIMO_PS_STATIC 0 |
| #define MIMO_PS_DYNAMIC 1 |
| #define MIMO_PS_NOLIMIT 3 |
| |
| |
| // |
| // There should be 128 bits to cover all of the MCS rates. However, since |
| // 8190 does not support too much rates, one integer is quite enough. |
| // |
| |
| #define sHTCLng 4 |
| |
| |
| #define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff |
| #define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00 |
| #define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP |
| |
| |
| typedef enum _HT_MCS_RATE{ |
| HT_MCS0 = 0x00000001, |
| HT_MCS1 = 0x00000002, |
| HT_MCS2 = 0x00000004, |
| HT_MCS3 = 0x00000008, |
| HT_MCS4 = 0x00000010, |
| HT_MCS5 = 0x00000020, |
| HT_MCS6 = 0x00000040, |
| HT_MCS7 = 0x00000080, |
| HT_MCS8 = 0x00000100, |
| HT_MCS9 = 0x00000200, |
| HT_MCS10 = 0x00000400, |
| HT_MCS11 = 0x00000800, |
| HT_MCS12 = 0x00001000, |
| HT_MCS13 = 0x00002000, |
| HT_MCS14 = 0x00004000, |
| HT_MCS15 = 0x00008000, |
| // Do not define MCS32 here although 8190 support MCS32 |
| }HT_MCS_RATE,*PHT_MCS_RATE; |
| |
| // |
| // Represent Channel Width in HT Capabilities |
| // |
| typedef enum _HT_CHANNEL_WIDTH{ |
| HT_CHANNEL_WIDTH_20 = 0, |
| HT_CHANNEL_WIDTH_20_40 = 1, |
| }HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; |
| |
| // |
| // Represent Extention Channel Offset in HT Capabilities |
| // This is available only in 40Mhz mode. |
| // |
| typedef enum _HT_EXTCHNL_OFFSET{ |
| HT_EXTCHNL_OFFSET_NO_EXT = 0, |
| HT_EXTCHNL_OFFSET_UPPER = 1, |
| HT_EXTCHNL_OFFSET_NO_DEF = 2, |
| HT_EXTCHNL_OFFSET_LOWER = 3, |
| }HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; |
| |
| typedef enum _CHNLOP{ |
| CHNLOP_NONE = 0, // No Action now |
| CHNLOP_SCAN = 1, // Scan in progress |
| CHNLOP_SWBW = 2, // Bandwidth switching in progress |
| CHNLOP_SWCHNL = 3, // Software Channel switching in progress |
| } CHNLOP, *PCHNLOP; |
| |
| // Determine if the Channel Operation is in progress |
| #define CHHLOP_IN_PROGRESS(_pHTInfo) \ |
| ((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE |
| |
| /* |
| typedef union _HT_CAPABILITY{ |
| u16 ShortData; |
| u8 CharData[2]; |
| struct |
| { |
| u16 AdvCoding:1; |
| u16 ChlWidth:1; |
| u16 MimoPwrSave:2; |
| u16 GreenField:1; |
| u16 ShortGI20Mhz:1; |
| u16 ShortGI40Mhz:1; |
| u16 STBC:1; |
| u16 BeamForm:1; |
| u16 DelayBA:1; |
| u16 MaxAMSDUSize:1; |
| u16 DssCCk:1; |
| u16 PSMP:1; |
| u16 Rsvd:3; |
| }Field; |
| }HT_CAPABILITY, *PHT_CAPABILITY; |
| |
| typedef union _HT_CAPABILITY_MACPARA{ |
| u8 ShortData; |
| u8 CharData[1]; |
| struct |
| { |
| u8 MaxRxAMPDU:2; |
| u8 MPDUDensity:2; |
| u8 Rsvd:4; |
| }Field; |
| }HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA; |
| */ |
| |
| typedef enum _HT_ACTION{ |
| ACT_RECOMMAND_WIDTH = 0, |
| ACT_MIMO_PWR_SAVE = 1, |
| ACT_PSMP = 2, |
| ACT_SET_PCO_PHASE = 3, |
| ACT_MIMO_CHL_MEASURE = 4, |
| ACT_RECIPROCITY_CORRECT = 5, |
| ACT_MIMO_CSI_MATRICS = 6, |
| ACT_MIMO_NOCOMPR_STEER = 7, |
| ACT_MIMO_COMPR_STEER = 8, |
| ACT_ANTENNA_SELECT = 9, |
| } HT_ACTION, *PHT_ACTION; |
| |
| |
| /* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */ |
| typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier{ |
| SC_MODE_DUPLICATE = 0, |
| SC_MODE_LOWER = 1, |
| SC_MODE_UPPER = 2, |
| SC_MODE_FULL40MHZ = 3, |
| }HT_BW40_SC_E; |
| |
| typedef struct _HT_CAPABILITY_ELE{ |
| |
| //HT capability info |
| u8 AdvCoding:1; |
| u8 ChlWidth:1; |
| u8 MimoPwrSave:2; |
| u8 GreenField:1; |
| u8 ShortGI20Mhz:1; |
| u8 ShortGI40Mhz:1; |
| u8 TxSTBC:1; |
| u8 RxSTBC:2; |
| u8 DelayBA:1; |
| u8 MaxAMSDUSize:1; |
| u8 DssCCk:1; |
| u8 PSMP:1; |
| u8 Rsvd1:1; |
| u8 LSigTxopProtect:1; |
| |
| //MAC HT parameters info |
| u8 MaxRxAMPDUFactor:2; |
| u8 MPDUDensity:3; |
| u8 Rsvd2:3; |
| |
| //Supported MCS set |
| u8 MCS[16]; |
| |
| |
| //Extended HT Capability Info |
| u16 ExtHTCapInfo; |
| |
| //TXBF Capabilities |
| u8 TxBFCap[4]; |
| |
| //Antenna Selection Capabilities |
| u8 ASCap; |
| |
| } __attribute__ ((packed)) HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE; |
| |
| //------------------------------------------------------------ |
| // The HT Information element is present in beacons |
| // Only AP is required to include this element |
| //------------------------------------------------------------ |
| |
| typedef struct _HT_INFORMATION_ELE{ |
| u8 ControlChl; |
| |
| u8 ExtChlOffset:2; |
| u8 RecommemdedTxWidth:1; |
| u8 RIFS:1; |
| u8 PSMPAccessOnly:1; |
| u8 SrvIntGranularity:3; |
| |
| u8 OptMode:2; |
| u8 NonGFDevPresent:1; |
| u8 Revd1:5; |
| u8 Revd2:8; |
| |
| u8 Rsvd3:6; |
| u8 DualBeacon:1; |
| u8 DualCTSProtect:1; |
| |
| u8 SecondaryBeacon:1; |
| u8 LSigTxopProtectFull:1; |
| u8 PcoActive:1; |
| u8 PcoPhase:1; |
| u8 Rsvd4:4; |
| |
| u8 BasicMSC[16]; |
| } __attribute__ ((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE; |
| |
| // |
| // MIMO Power Save control field. |
| // This is appear in MIMO Power Save Action Frame |
| // |
| typedef struct _MIMOPS_CTRL{ |
| u8 MimoPsEnable:1; |
| u8 MimoPsMode:1; |
| u8 Reserved:6; |
| } MIMOPS_CTRL, *PMIMOPS_CTRL; |
| |
| typedef enum _HT_SPEC_VER{ |
| HT_SPEC_VER_IEEE = 0, |
| HT_SPEC_VER_EWC = 1, |
| }HT_SPEC_VER, *PHT_SPEC_VER; |
| |
| typedef enum _HT_AGGRE_MODE_E{ |
| HT_AGG_AUTO = 0, |
| HT_AGG_FORCE_ENABLE = 1, |
| HT_AGG_FORCE_DISABLE = 2, |
| }HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E; |
| |
| //------------------------------------------------------------ |
| // The Data structure is used to keep HT related variables when card is |
| // configured as non-AP STA mode. **Note** Current_xxx should be set |
| // to default value in HTInitializeHTInfo() |
| //------------------------------------------------------------ |
| |
| typedef struct _RT_HIGH_THROUGHPUT{ |
| u8 bEnableHT; |
| u8 bCurrentHTSupport; |
| |
| u8 bRegBW40MHz; // Tx 40MHz channel capablity |
| u8 bCurBW40MHz; // Tx 40MHz channel capability |
| |
| u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz |
| u8 bCurShortGI40MHz; // Tx Short GI for 40MHz |
| |
| u8 bRegShortGI20MHz; // Tx Short GI for 20MHz |
| u8 bCurShortGI20MHz; // Tx Short GI for 20MHz |
| |
| u8 bRegSuppCCK; // Tx CCK rate capability |
| u8 bCurSuppCCK; // Tx CCK rate capability |
| |
| // 802.11n spec version for "peer" |
| HT_SPEC_VER ePeerHTSpecVer; |
| |
| |
| // HT related information for "Self" |
| HT_CAPABILITY_ELE SelfHTCap; // This is HT cap element sent to peer STA, which also indicate HT Rx capabilities. |
| HT_INFORMATION_ELE SelfHTInfo; // This is HT info element sent to peer STA, which also indicate HT Rx capabilities. |
| |
| // HT related information for "Peer" |
| u8 PeerHTCapBuf[32]; |
| u8 PeerHTInfoBuf[32]; |
| |
| |
| // A-MSDU related |
| u8 bAMSDU_Support; // This indicates Tx A-MSDU capability |
| u16 nAMSDU_MaxSize; // This indicates Tx A-MSDU capability |
| u8 bCurrent_AMSDU_Support; // This indicates Tx A-MSDU capability |
| u16 nCurrent_AMSDU_MaxSize; // This indicates Tx A-MSDU capability |
| |
| |
| // AMPDU related <2006.08.10 Emily> |
| u8 bAMPDUEnable; // This indicate Tx A-MPDU capability |
| u8 bCurrentAMPDUEnable; // This indicate Tx A-MPDU capability |
| u8 AMPDU_Factor; // This indicate Tx A-MPDU capability |
| u8 CurrentAMPDUFactor; // This indicate Tx A-MPDU capability |
| u8 MPDU_Density; // This indicate Tx A-MPDU capability |
| u8 CurrentMPDUDensity; // This indicate Tx A-MPDU capability |
| |
| // Forced A-MPDU enable |
| HT_AGGRE_MODE_E ForcedAMPDUMode; |
| u8 ForcedAMPDUFactor; |
| u8 ForcedMPDUDensity; |
| |
| // Forced A-MSDU enable |
| HT_AGGRE_MODE_E ForcedAMSDUMode; |
| u16 ForcedAMSDUMaxSize; |
| |
| u8 bForcedShortGI; |
| |
| u8 CurrentOpMode; |
| |
| // MIMO PS related |
| u8 SelfMimoPs; |
| u8 PeerMimoPs; |
| |
| // 40MHz Channel Offset settings. |
| HT_EXTCHNL_OFFSET CurSTAExtChnlOffset; |
| u8 bCurTxBW40MHz; // If we use 40 MHz to Tx |
| u8 PeerBandwidth; |
| |
| // For Bandwidth Switching |
| u8 bSwBwInProgress; |
| CHNLOP ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15. |
| u8 SwBwStep; |
| //struct timer_list SwBwTimer; //moved to ieee80211_device. as timer_list need include some header file here. |
| |
| // For Realtek proprietary A-MPDU factor for aggregation |
| u8 bRegRT2RTAggregation; |
| u8 RT2RT_HT_Mode; |
| u8 bCurrentRT2RTAggregation; |
| u8 bCurrentRT2RTLongSlotTime; |
| u8 szRT2RTAggBuffer[10]; |
| |
| // Rx Reorder control |
| u8 bRegRxReorderEnable; |
| u8 bCurRxReorderEnable; |
| u8 RxReorderWinSize; |
| u8 RxReorderPendingTime; |
| u16 RxReorderDropCounter; |
| |
| |
| // Add for Broadcom(Linksys) IOT. Joseph |
| u8 bIsPeerBcm; |
| |
| // For IOT issue. |
| u8 IOTPeer; |
| u32 IOTAction; |
| u8 IOTRaFunc; |
| } __attribute__ ((packed)) RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT; |
| |
| |
| //------------------------------------------------------------ |
| // The Data structure is used to keep HT related variable for "each Sta" |
| // when card is configured as "AP mode" |
| //------------------------------------------------------------ |
| |
| typedef struct _RT_HTINFO_STA_ENTRY{ |
| u8 bEnableHT; |
| |
| u8 bSupportCck; |
| |
| u16 AMSDU_MaxSize; |
| |
| u8 AMPDU_Factor; |
| u8 MPDU_Density; |
| |
| u8 HTHighestOperaRate; |
| |
| u8 bBw40MHz; |
| |
| u8 MimoPs; |
| |
| u8 McsRateSet[16]; |
| |
| |
| }RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY; |
| |
| |
| |
| |
| |
| //------------------------------------------------------------ |
| // The Data structure is used to keep HT related variable for "each AP" |
| // when card is configured as "STA mode" |
| //------------------------------------------------------------ |
| |
| typedef struct _BSS_HT{ |
| |
| u8 bdSupportHT; |
| |
| // HT related elements |
| u8 bdHTCapBuf[32]; |
| u16 bdHTCapLen; |
| u8 bdHTInfoBuf[32]; |
| u16 bdHTInfoLen; |
| |
| HT_SPEC_VER bdHTSpecVer; |
| //HT_CAPABILITY_ELE bdHTCapEle; |
| //HT_INFORMATION_ELE bdHTInfoEle; |
| |
| u8 bdRT2RTAggregation; |
| u8 bdRT2RTLongSlotTime; |
| u8 RT2RT_HT_Mode; |
| bool bdHT1R; |
| } __attribute__ ((packed)) BSS_HT, *PBSS_HT; |
| |
| typedef struct _MIMO_RSSI{ |
| u32 EnableAntenna; |
| u32 AntennaA; |
| u32 AntennaB; |
| u32 AntennaC; |
| u32 AntennaD; |
| u32 Average; |
| }MIMO_RSSI, *PMIMO_RSSI; |
| |
| typedef struct _MIMO_EVM{ |
| u32 EVM1; |
| u32 EVM2; |
| }MIMO_EVM, *PMIMO_EVM; |
| |
| typedef struct _FALSE_ALARM_STATISTICS{ |
| u32 Cnt_Parity_Fail; |
| u32 Cnt_Rate_Illegal; |
| u32 Cnt_Crc8_fail; |
| u32 Cnt_all; |
| }FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; |
| |
| |
| extern u8 MCS_FILTER_ALL[16]; |
| extern u8 MCS_FILTER_1SS[16]; |
| |
| /* 2007/07/11 MH Modify the macro. Becaus STA may link with a N-AP. If we set |
| STA in A/B/G mode and AP is still in N mode. The macro will be wrong. We have |
| to add a macro to judge wireless mode. */ |
| #define PICK_RATE(_nLegacyRate, _nMcsRate) \ |
| (_nMcsRate==0)?(_nLegacyRate&0x7f):(_nMcsRate) |
| /* 2007/07/12 MH We only define legacy and HT wireless mode now. */ |
| #define LEGACY_WIRELESS_MODE IEEE_MODE_MASK |
| |
| #define CURRENT_RATE(WirelessMode, LegacyRate, HTRate) \ |
| ((WirelessMode & (LEGACY_WIRELESS_MODE))!=0)?\ |
| (LegacyRate):\ |
| (PICK_RATE(LegacyRate, HTRate)) |
| |
| |
| |
| // MCS Bw 40 {1~7, 12~15,32} |
| #define RATE_ADPT_1SS_MASK 0xFF |
| #define RATE_ADPT_2SS_MASK 0xF0 //Skip MCS8~11 because mcs7 > mcs6, 9, 10, 11. 2007.01.16 by Emily |
| #define RATE_ADPT_MCS32_MASK 0x01 |
| |
| #define IS_11N_MCS_RATE(rate) (rate&0x80) |
| |
| typedef enum _HT_AGGRE_SIZE{ |
| HT_AGG_SIZE_8K = 0, |
| HT_AGG_SIZE_16K = 1, |
| HT_AGG_SIZE_32K = 2, |
| HT_AGG_SIZE_64K = 3, |
| }HT_AGGRE_SIZE_E, *PHT_AGGRE_SIZE_E; |
| |
| /* Indicate different AP vendor for IOT issue */ |
| typedef enum _HT_IOT_PEER |
| { |
| HT_IOT_PEER_UNKNOWN = 0, |
| HT_IOT_PEER_REALTEK = 1, |
| HT_IOT_PEER_REALTEK_92SE = 2, |
| HT_IOT_PEER_BROADCOM = 3, |
| HT_IOT_PEER_RALINK = 4, |
| HT_IOT_PEER_ATHEROS = 5, |
| HT_IOT_PEER_CISCO= 6, |
| HT_IOT_PEER_MARVELL=7, |
| HT_IOT_PEER_92U_SOFTAP = 8, |
| HT_IOT_PEER_SELF_SOFTAP = 9, |
| HT_IOT_PEER_MAX = 10, |
| }HT_IOT_PEER_E, *PHTIOT_PEER_E; |
| |
| // |
| // IOT Action for different AP |
| // |
| typedef enum _HT_IOT_ACTION{ |
| HT_IOT_ACT_TX_USE_AMSDU_4K = 0x00000001, |
| HT_IOT_ACT_TX_USE_AMSDU_8K = 0x00000002, |
| HT_IOT_ACT_DISABLE_MCS14 = 0x00000004, |
| HT_IOT_ACT_DISABLE_MCS15 = 0x00000008, |
| HT_IOT_ACT_DISABLE_ALL_2SS = 0x00000010, |
| HT_IOT_ACT_DISABLE_EDCA_TURBO = 0x00000020, |
| HT_IOT_ACT_MGNT_USE_CCK_6M = 0x00000040, |
| HT_IOT_ACT_CDD_FSYNC = 0x00000080, |
| HT_IOT_ACT_PURE_N_MODE = 0x00000100, |
| HT_IOT_ACT_FORCED_CTS2SELF = 0x00000200, |
| HT_IOT_ACT_FORCED_RTS = 0x00000400, |
| HT_IOT_ACT_AMSDU_ENABLE = 0x00000800, |
| HT_IOT_ACT_REJECT_ADDBA_REQ = 0x00001000, |
| HT_IOT_ACT_ALLOW_PEER_AGG_ONE_PKT = 0x00002000, |
| HT_IOT_ACT_EDCA_BIAS_ON_RX = 0x00004000, |
| |
| HT_IOT_ACT_HYBRID_AGGREGATION = 0x00010000, |
| HT_IOT_ACT_DISABLE_SHORT_GI = 0x00020000, |
| HT_IOT_ACT_DISABLE_HIGH_POWER = 0x00040000, |
| HT_IOT_ACT_DISABLE_TX_40_MHZ = 0x00080000, |
| HT_IOT_ACT_TX_NO_AGGREGATION = 0x00100000, |
| HT_IOT_ACT_DISABLE_TX_2SS = 0x00200000, |
| |
| HT_IOT_ACT_MID_HIGHPOWER = 0x00400000, |
| HT_IOT_ACT_NULL_DATA_POWER_SAVING = 0x00800000, |
| |
| HT_IOT_ACT_DISABLE_CCK_RATE = 0x01000000, |
| HT_IOT_ACT_FORCED_ENABLE_BE_TXOP = 0x02000000, |
| HT_IOT_ACT_WA_IOT_Broadcom = 0x04000000, |
| }HT_IOT_ACTION_E, *PHT_IOT_ACTION_E; |
| |
| typedef enum _HT_IOT_RAFUNC{ |
| HT_IOT_RAFUNC_PEER_1R = 0x01, |
| HT_IOT_RAFUNC_TX_AMSDU = 0x02, |
| HT_IOT_RAFUNC_DISABLE_ALL = 0x80, |
| }HT_IOT_RAFUNC, *PHT_IOT_RAFUNC; |
| |
| typedef enum _RT_HT_CAP{ |
| RT_HT_CAP_USE_TURBO_AGGR = 0x01, |
| RT_HT_CAP_USE_LONG_PREAMBLE = 0x02, |
| RT_HT_CAP_USE_AMPDU = 0x04, |
| RT_HT_CAP_USE_WOW = 0x8, |
| RT_HT_CAP_USE_SOFTAP = 0x10, |
| RT_HT_CAP_USE_92SE = 0x20, |
| }RT_HT_CAPBILITY, *PRT_HT_CAPBILITY; |
| |
| #endif //_RTL819XU_HTTYPE_H_ |
| |