ARM: dts: msm: Update rear aux camera configuration for sdm845 MTP/CDP
Update the camera actuator, roll position configuration for rear
aux camera.
Change-Id: Id61cbceea30af84151a45c041d666e59e780b40d
Signed-off-by: Suresh Vankadara <svankada@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi b/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi
index 7ca2645..307bbc3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi
@@ -87,7 +87,7 @@
rgltr-load-current = <0>;
};
- actuator_front: qcom,actuator@1 {
+ actuator_rear_aux: qcom,actuator@1 {
cell-index = <1>;
reg = <0x1>;
compatible = "qcom,actuator";
@@ -100,6 +100,19 @@
rgltr-load-current = <0>;
};
+ actuator_front: qcom,actuator@2 {
+ cell-index = <2>;
+ reg = <0x2>;
+ compatible = "qcom,actuator";
+ cci-master = <1>;
+ cam_vaf-supply = <&actuator_regulator>;
+ regulator-names = "cam_vaf";
+ rgltr-cntrl-support;
+ rgltr-min-voltage = <2800000>;
+ rgltr-max-voltage = <2800000>;
+ rgltr-load-current = <0>;
+ };
+
ois_rear: qcom,ois@0 {
cell-index = <0>;
reg = <0x0>;
@@ -289,9 +302,10 @@
compatible = "qcom,cam-sensor";
reg = <0x1>;
csiphy-sd-index = <1>;
- sensor-position-roll = <90>;
+ sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
+ actuator-src = <&actuator_rear_aux>;
eeprom-src = <&eeprom_rear_aux>;
cam_vdig-supply = <&camera_ldo>;
cam_vio-supply = <&pm8998_lvs1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi b/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi
index aa55698..511d8012 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi
@@ -87,7 +87,7 @@
rgltr-load-current = <0>;
};
- actuator_front: qcom,actuator@1 {
+ actuator_rear_aux: qcom,actuator@1 {
cell-index = <1>;
reg = <0x1>;
compatible = "qcom,actuator";
@@ -100,6 +100,19 @@
rgltr-load-current = <0>;
};
+ actuator_front: qcom,actuator@2 {
+ cell-index = <2>;
+ reg = <0x2>;
+ compatible = "qcom,actuator";
+ cci-master = <1>;
+ cam_vaf-supply = <&actuator_regulator>;
+ regulator-names = "cam_vaf";
+ rgltr-cntrl-support;
+ rgltr-min-voltage = <2800000>;
+ rgltr-max-voltage = <2800000>;
+ rgltr-load-current = <0>;
+ };
+
ois_rear: qcom,ois@0 {
cell-index = <0>;
reg = <0x0>;
@@ -289,9 +302,10 @@
compatible = "qcom,cam-sensor";
reg = <0x1>;
csiphy-sd-index = <1>;
- sensor-position-roll = <90>;
+ sensor-position-roll = <270>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
+ actuator-src = <&actuator_rear_aux>;
eeprom-src = <&eeprom_rear_aux>;
cam_vdig-supply = <&camera_ldo>;
cam_vio-supply = <&pm8998_lvs1>;