OMAP4: clock data: Remove UNIPRO clock nodes
UNIPRO was removed from OMAP4 devices from ES2.0 onwards.
Since this IP was anyway non-functional and not supported,
it is best to remove it completely.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[b-cousson@ti.com: Update the changelog]
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: split PRCM header file changes into a separate patch]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 96bc668..044df38 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -935,63 +935,6 @@
.set_rate = &omap2_clksel_set_rate,
};
-/* DPLL_UNIPRO */
-static struct dpll_data dpll_unipro_dd = {
- .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_UNIPRO,
- .clk_bypass = &sys_clkin_ck,
- .clk_ref = &sys_clkin_ck,
- .control_reg = OMAP4430_CM_CLKMODE_DPLL_UNIPRO,
- .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
- .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO,
- .idlest_reg = OMAP4430_CM_IDLEST_DPLL_UNIPRO,
- .mult_mask = OMAP4430_DPLL_MULT_MASK,
- .div1_mask = OMAP4430_DPLL_DIV_MASK,
- .enable_mask = OMAP4430_DPLL_EN_MASK,
- .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK,
- .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK,
- .max_multiplier = 2047,
- .max_divider = 128,
- .min_divider = 1,
-};
-
-
-static struct clk dpll_unipro_ck = {
- .name = "dpll_unipro_ck",
- .parent = &sys_clkin_ck,
- .dpll_data = &dpll_unipro_dd,
- .init = &omap2_init_dpll_parent,
- .ops = &clkops_omap3_noncore_dpll_ops,
- .recalc = &omap3_dpll_recalc,
- .round_rate = &omap2_dpll_round_rate,
- .set_rate = &omap3_noncore_dpll_set_rate,
-};
-
-static struct clk dpll_unipro_x2_ck = {
- .name = "dpll_unipro_x2_ck",
- .parent = &dpll_unipro_ck,
- .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO,
- .flags = CLOCK_CLKOUTX2,
- .ops = &clkops_omap4_dpllmx_ops,
- .recalc = &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel dpll_unipro_m2x2_div[] = {
- { .parent = &dpll_unipro_x2_ck, .rates = div31_1to31_rates },
- { .parent = NULL },
-};
-
-static struct clk dpll_unipro_m2x2_ck = {
- .name = "dpll_unipro_m2x2_ck",
- .parent = &dpll_unipro_x2_ck,
- .clksel = dpll_unipro_m2x2_div,
- .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO,
- .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
- .ops = &clkops_omap4_dpllmx_ops,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate,
-};
-
static struct clk usb_hs_clk_div_ck = {
.name = "usb_hs_clk_div_ck",
.parent = &dpll_abe_m3x2_ck,
@@ -3058,9 +3001,6 @@
CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, CK_443X),
CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck, CK_443X),
CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck, CK_443X),
- CLK(NULL, "dpll_unipro_ck", &dpll_unipro_ck, CK_443X),
- CLK(NULL, "dpll_unipro_x2_ck", &dpll_unipro_x2_ck, CK_443X),
- CLK(NULL, "dpll_unipro_m2x2_ck", &dpll_unipro_m2x2_ck, CK_443X),
CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X),
CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X),
CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X),