| /* |
| * mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface |
| * |
| * Authors: Dave Updegraff <dave@cray.org> |
| * Kumar Gala <galak@kernel.crashing.org> |
| * Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org> |
| * ..and from sc520_wdt |
| * Copyright (c) 2008 MontaVista Software, Inc. |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * Note: it appears that you can only actually ENABLE or DISABLE the thing |
| * once after POR. Once enabled, you cannot disable, and vice versa. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/miscdevice.h> |
| #include <linux/of_platform.h> |
| #include <linux/module.h> |
| #include <linux/watchdog.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <sysdev/fsl_soc.h> |
| |
| struct mpc8xxx_wdt { |
| __be32 res0; |
| __be32 swcrr; /* System watchdog control register */ |
| #define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ |
| #define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */ |
| #define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/ |
| #define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */ |
| __be32 swcnr; /* System watchdog count register */ |
| u8 res1[2]; |
| __be16 swsrr; /* System watchdog service register */ |
| u8 res2[0xF0]; |
| }; |
| |
| struct mpc8xxx_wdt_type { |
| int prescaler; |
| bool hw_enabled; |
| }; |
| |
| static struct mpc8xxx_wdt __iomem *wd_base; |
| static int mpc8xxx_wdt_init_late(void); |
| |
| static u16 timeout = 0xffff; |
| module_param(timeout, ushort, 0); |
| MODULE_PARM_DESC(timeout, |
| "Watchdog timeout in ticks. (0<timeout<65536, default=65535)"); |
| |
| static bool reset = 1; |
| module_param(reset, bool, 0); |
| MODULE_PARM_DESC(reset, |
| "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset"); |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " |
| "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| /* |
| * We always prescale, but if someone really doesn't want to they can set this |
| * to 0 |
| */ |
| static int prescale = 1; |
| static unsigned int timeout_sec; |
| |
| static unsigned long wdt_is_open; |
| static DEFINE_SPINLOCK(wdt_spinlock); |
| |
| static void mpc8xxx_wdt_keepalive(void) |
| { |
| /* Ping the WDT */ |
| spin_lock(&wdt_spinlock); |
| out_be16(&wd_base->swsrr, 0x556c); |
| out_be16(&wd_base->swsrr, 0xaa39); |
| spin_unlock(&wdt_spinlock); |
| } |
| |
| static void mpc8xxx_wdt_timer_ping(unsigned long arg); |
| static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0, 0); |
| |
| static void mpc8xxx_wdt_timer_ping(unsigned long arg) |
| { |
| mpc8xxx_wdt_keepalive(); |
| /* We're pinging it twice faster than needed, just to be sure. */ |
| mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2); |
| } |
| |
| static void mpc8xxx_wdt_pr_warn(const char *msg) |
| { |
| pr_crit("%s, expect the %s soon!\n", msg, |
| reset ? "reset" : "machine check exception"); |
| } |
| |
| static ssize_t mpc8xxx_wdt_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| if (count) |
| mpc8xxx_wdt_keepalive(); |
| return count; |
| } |
| |
| static int mpc8xxx_wdt_open(struct inode *inode, struct file *file) |
| { |
| u32 tmp = SWCRR_SWEN; |
| if (test_and_set_bit(0, &wdt_is_open)) |
| return -EBUSY; |
| |
| /* Once we start the watchdog we can't stop it */ |
| if (nowayout) |
| __module_get(THIS_MODULE); |
| |
| /* Good, fire up the show */ |
| if (prescale) |
| tmp |= SWCRR_SWPR; |
| if (reset) |
| tmp |= SWCRR_SWRI; |
| |
| tmp |= timeout << 16; |
| |
| out_be32(&wd_base->swcrr, tmp); |
| |
| del_timer_sync(&wdt_timer); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int mpc8xxx_wdt_release(struct inode *inode, struct file *file) |
| { |
| if (!nowayout) |
| mpc8xxx_wdt_timer_ping(0); |
| else |
| mpc8xxx_wdt_pr_warn("watchdog closed"); |
| clear_bit(0, &wdt_is_open); |
| return 0; |
| } |
| |
| static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| static const struct watchdog_info ident = { |
| .options = WDIOF_KEEPALIVEPING, |
| .firmware_version = 1, |
| .identity = "MPC8xxx", |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| case WDIOC_KEEPALIVE: |
| mpc8xxx_wdt_keepalive(); |
| return 0; |
| case WDIOC_GETTIMEOUT: |
| return put_user(timeout_sec, p); |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| static const struct file_operations mpc8xxx_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = mpc8xxx_wdt_write, |
| .unlocked_ioctl = mpc8xxx_wdt_ioctl, |
| .open = mpc8xxx_wdt_open, |
| .release = mpc8xxx_wdt_release, |
| }; |
| |
| static struct miscdevice mpc8xxx_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &mpc8xxx_wdt_fops, |
| }; |
| |
| static const struct of_device_id mpc8xxx_wdt_match[]; |
| static int __devinit mpc8xxx_wdt_probe(struct platform_device *ofdev) |
| { |
| int ret; |
| const struct of_device_id *match; |
| struct device_node *np = ofdev->dev.of_node; |
| const struct mpc8xxx_wdt_type *wdt_type; |
| u32 freq = fsl_get_sys_freq(); |
| bool enabled; |
| |
| match = of_match_device(mpc8xxx_wdt_match, &ofdev->dev); |
| if (!match) |
| return -EINVAL; |
| wdt_type = match->data; |
| |
| if (!freq || freq == -1) |
| return -EINVAL; |
| |
| wd_base = of_iomap(np, 0); |
| if (!wd_base) |
| return -ENOMEM; |
| |
| enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN; |
| if (!enabled && wdt_type->hw_enabled) { |
| pr_info("could not be enabled in software\n"); |
| ret = -ENOSYS; |
| goto err_unmap; |
| } |
| |
| /* Calculate the timeout in seconds */ |
| if (prescale) |
| timeout_sec = (timeout * wdt_type->prescaler) / freq; |
| else |
| timeout_sec = timeout / freq; |
| |
| #ifdef MODULE |
| ret = mpc8xxx_wdt_init_late(); |
| if (ret) |
| goto err_unmap; |
| #endif |
| |
| pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d (%d seconds)\n", |
| reset ? "reset" : "interrupt", timeout, timeout_sec); |
| |
| /* |
| * If the watchdog was previously enabled or we're running on |
| * MPC8xxx, we should ping the wdt from the kernel until the |
| * userspace handles it. |
| */ |
| if (enabled) |
| mpc8xxx_wdt_timer_ping(0); |
| return 0; |
| err_unmap: |
| iounmap(wd_base); |
| wd_base = NULL; |
| return ret; |
| } |
| |
| static int __devexit mpc8xxx_wdt_remove(struct platform_device *ofdev) |
| { |
| mpc8xxx_wdt_pr_warn("watchdog removed"); |
| del_timer_sync(&wdt_timer); |
| misc_deregister(&mpc8xxx_wdt_miscdev); |
| iounmap(wd_base); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mpc8xxx_wdt_match[] = { |
| { |
| .compatible = "mpc83xx_wdt", |
| .data = &(struct mpc8xxx_wdt_type) { |
| .prescaler = 0x10000, |
| }, |
| }, |
| { |
| .compatible = "fsl,mpc8610-wdt", |
| .data = &(struct mpc8xxx_wdt_type) { |
| .prescaler = 0x10000, |
| .hw_enabled = true, |
| }, |
| }, |
| { |
| .compatible = "fsl,mpc823-wdt", |
| .data = &(struct mpc8xxx_wdt_type) { |
| .prescaler = 0x800, |
| }, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match); |
| |
| static struct platform_driver mpc8xxx_wdt_driver = { |
| .probe = mpc8xxx_wdt_probe, |
| .remove = __devexit_p(mpc8xxx_wdt_remove), |
| .driver = { |
| .name = "mpc8xxx_wdt", |
| .owner = THIS_MODULE, |
| .of_match_table = mpc8xxx_wdt_match, |
| }, |
| }; |
| |
| /* |
| * We do wdt initialization in two steps: arch_initcall probes the wdt |
| * very early to start pinging the watchdog (misc devices are not yet |
| * available), and later module_init() just registers the misc device. |
| */ |
| static int mpc8xxx_wdt_init_late(void) |
| { |
| int ret; |
| |
| if (!wd_base) |
| return -ENODEV; |
| |
| ret = misc_register(&mpc8xxx_wdt_miscdev); |
| if (ret) { |
| pr_err("cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, ret); |
| return ret; |
| } |
| return 0; |
| } |
| #ifndef MODULE |
| module_init(mpc8xxx_wdt_init_late); |
| #endif |
| |
| static int __init mpc8xxx_wdt_init(void) |
| { |
| return platform_driver_register(&mpc8xxx_wdt_driver); |
| } |
| arch_initcall(mpc8xxx_wdt_init); |
| |
| static void __exit mpc8xxx_wdt_exit(void) |
| { |
| platform_driver_unregister(&mpc8xxx_wdt_driver); |
| } |
| module_exit(mpc8xxx_wdt_exit); |
| |
| MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); |
| MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx " |
| "uProcessors"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |