usb: dwc3: adapt dwc3 core to use Generic PHY Framework
Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
power_on and power_off the following APIs are used phy_init(), phy_exit(),
phy_power_on() and phy_power_off().
However using the old USB phy library wont be removed till the PHYs of all
other SoC's using dwc3 core is adapted to the Generic PHY Framework.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c89570c..d001417 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -61,9 +61,10 @@
* dwc3_core_soft_reset - Issues core soft reset and PHY reset
* @dwc: pointer to our context structure
*/
-static void dwc3_core_soft_reset(struct dwc3 *dwc)
+static int dwc3_core_soft_reset(struct dwc3 *dwc)
{
u32 reg;
+ int ret;
/* Before Resetting PHY, put Core in Reset */
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
@@ -82,6 +83,15 @@
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
+ ret = phy_init(dwc->usb2_generic_phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_init(dwc->usb3_generic_phy);
+ if (ret < 0) {
+ phy_exit(dwc->usb2_generic_phy);
+ return ret;
+ }
mdelay(100);
/* Clear USB3 PHY reset */
@@ -100,6 +110,8 @@
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_CORESOFTRESET;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ return 0;
}
/**
@@ -391,7 +403,9 @@
cpu_relax();
} while (true);
- dwc3_core_soft_reset(dwc);
+ ret = dwc3_core_soft_reset(dwc);
+ if (ret)
+ goto err0;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
@@ -456,6 +470,8 @@
err1:
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);
err0:
return ret;
@@ -466,6 +482,8 @@
dwc3_free_scratch_buffers(dwc);
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);
}
#define DWC3_ALIGN_MASK (16 - 1)
@@ -556,6 +574,32 @@
}
}
+ dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
+ if (IS_ERR(dwc->usb2_generic_phy)) {
+ ret = PTR_ERR(dwc->usb2_generic_phy);
+ if (ret == -ENOSYS || ret == -ENODEV) {
+ dwc->usb2_generic_phy = NULL;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
+ dev_err(dev, "no usb2 phy configured\n");
+ return ret;
+ }
+ }
+
+ dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
+ if (IS_ERR(dwc->usb3_generic_phy)) {
+ ret = PTR_ERR(dwc->usb3_generic_phy);
+ if (ret == -ENOSYS || ret == -ENODEV) {
+ dwc->usb3_generic_phy = NULL;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
+ dev_err(dev, "no usb3 phy configured\n");
+ return ret;
+ }
+ }
+
dwc->xhci_resources[0].start = res->start;
dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
DWC3_XHCI_REGS_END;
@@ -612,11 +656,18 @@
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
+ ret = phy_power_on(dwc->usb2_generic_phy);
+ if (ret < 0)
+ goto err1;
+
+ ret = phy_power_on(dwc->usb3_generic_phy);
+ if (ret < 0)
+ goto err_usb2phy_power;
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
- goto err1;
+ goto err_usb3phy_power;
}
switch (dwc->dr_mode) {
@@ -685,6 +736,12 @@
err2:
dwc3_event_buffers_cleanup(dwc);
+err_usb3phy_power:
+ phy_power_off(dwc->usb3_generic_phy);
+
+err_usb2phy_power:
+ phy_power_off(dwc->usb2_generic_phy);
+
err1:
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
@@ -702,6 +759,8 @@
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
+ phy_power_off(dwc->usb2_generic_phy);
+ phy_power_off(dwc->usb3_generic_phy);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -799,6 +858,8 @@
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);
return 0;
}
@@ -807,9 +868,17 @@
{
struct dwc3 *dwc = dev_get_drvdata(dev);
unsigned long flags;
+ int ret;
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
+ ret = phy_init(dwc->usb2_generic_phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_init(dwc->usb3_generic_phy);
+ if (ret < 0)
+ goto err_usb2phy_init;
spin_lock_irqsave(&dwc->lock, flags);
@@ -833,6 +902,11 @@
pm_runtime_enable(dev);
return 0;
+
+err_usb2phy_init:
+ phy_exit(dwc->usb2_generic_phy);
+
+ return ret;
}
static const struct dev_pm_ops dwc3_dev_pm_ops = {