bnx2x: Re-factor the initialization code
Moving the code to a more logical place and beautifying it. No real change in
behavior.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index a231780..97bc5e0 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -116,16 +116,22 @@
#define REG_RD_DMAE(bp, offset, valp, len32) \
do { \
bnx2x_read_dmae(bp, offset, len32);\
- memcpy(valp, bnx2x_sp(bp, wb_data[0]), len32 * 4); \
+ memcpy(valp, bnx2x_sp(bp, wb_data[0]), (len32) * 4); \
} while (0)
#define REG_WR_DMAE(bp, offset, valp, len32) \
do { \
- memcpy(bnx2x_sp(bp, wb_data[0]), valp, len32 * 4); \
+ memcpy(bnx2x_sp(bp, wb_data[0]), valp, (len32) * 4); \
bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), \
offset, len32); \
} while (0)
+#define VIRT_WR_DMAE_LEN(bp, data, addr, len32) \
+ do { \
+ memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \
+ bnx2x_write_big_buf_wb(bp, addr, len32); \
+ } while (0)
+
#define SHMEM_ADDR(bp, field) (bp->common.shmem_base + \
offsetof(struct shmem_region, field))
#define SHMEM_RD(bp, field) REG_RD(bp, SHMEM_ADDR(bp, field))
@@ -988,6 +994,9 @@
dma_addr_t gunzip_mapping;
int gunzip_outlen;
#define FW_BUF_SIZE 0x8000
+#define GUNZIP_BUF(bp) (bp->gunzip_buf)
+#define GUNZIP_PHYS(bp) (bp->gunzip_mapping)
+#define GUNZIP_OUTLEN(bp) (bp->gunzip_outlen)
struct raw_op *init_ops;
/* Init blocks offsets inside init_ops */
@@ -1003,6 +1012,18 @@
const u8 *xsem_pram_data;
const u8 *csem_int_table_data;
const u8 *csem_pram_data;
+#define INIT_OPS(bp) (bp->init_ops)
+#define INIT_OPS_OFFSETS(bp) (bp->init_ops_offsets)
+#define INIT_DATA(bp) (bp->init_data)
+#define INIT_TSEM_INT_TABLE_DATA(bp) (bp->tsem_int_table_data)
+#define INIT_TSEM_PRAM_DATA(bp) (bp->tsem_pram_data)
+#define INIT_USEM_INT_TABLE_DATA(bp) (bp->usem_int_table_data)
+#define INIT_USEM_PRAM_DATA(bp) (bp->usem_pram_data)
+#define INIT_XSEM_INT_TABLE_DATA(bp) (bp->xsem_int_table_data)
+#define INIT_XSEM_PRAM_DATA(bp) (bp->xsem_pram_data)
+#define INIT_CSEM_INT_TABLE_DATA(bp) (bp->csem_int_table_data)
+#define INIT_CSEM_PRAM_DATA(bp) (bp->csem_pram_data)
+
const struct firmware *firmware;
};
@@ -1030,6 +1051,9 @@
int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
u32 bnx2x_fw_command(struct bnx2x *bp, u32 command);
+void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
+void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
+ u32 addr, u32 len);
static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
int wait)