| /* |
| * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) |
| * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz |
| */ |
| |
| /* |
| * Mostly written by Mark Lord <mlord@pobox.com> |
| * and Gadi Oxman <gadio@netvision.net.il> |
| * and Andre Hedrick <andre@linux-ide.org> |
| * |
| * See linux/MAINTAINERS for address of current maintainer. |
| * |
| * This is the multiple IDE interface driver, as evolved from hd.c. |
| * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs |
| * (usually 14 & 15). |
| * There can be up to two drives per interface, as per the ATA-2 spec. |
| * |
| * ... |
| * |
| * From hd.c: |
| * | |
| * | It traverses the request-list, using interrupts to jump between functions. |
| * | As nearly all functions can be called within interrupts, we may not sleep. |
| * | Special care is recommended. Have Fun! |
| * | |
| * | modified by Drew Eckhardt to check nr of hd's from the CMOS. |
| * | |
| * | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug |
| * | in the early extended-partition checks and added DM partitions. |
| * | |
| * | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI). |
| * | |
| * | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", |
| * | and general streamlining by Mark Lord (mlord@pobox.com). |
| * |
| * October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by: |
| * |
| * Mark Lord (mlord@pobox.com) (IDE Perf.Pkg) |
| * Delman Lee (delman@ieee.org) ("Mr. atdisk2") |
| * Scott Snyder (snyder@fnald0.fnal.gov) (ATAPI IDE cd-rom) |
| * |
| * This was a rewrite of just about everything from hd.c, though some original |
| * code is still sprinkled about. Think of it as a major evolution, with |
| * inspiration from lots of linux users, esp. hamish@zot.apana.org.au |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/major.h> |
| #include <linux/errno.h> |
| #include <linux/genhd.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/ide.h> |
| #include <linux/hdreg.h> |
| #include <linux/completion.h> |
| #include <linux/device.h> |
| |
| struct class *ide_port_class; |
| |
| /** |
| * ide_device_get - get an additional reference to a ide_drive_t |
| * @drive: device to get a reference to |
| * |
| * Gets a reference to the ide_drive_t and increments the use count of the |
| * underlying LLDD module. |
| */ |
| int ide_device_get(ide_drive_t *drive) |
| { |
| struct device *host_dev; |
| struct module *module; |
| |
| if (!get_device(&drive->gendev)) |
| return -ENXIO; |
| |
| host_dev = drive->hwif->host->dev[0]; |
| module = host_dev ? host_dev->driver->owner : NULL; |
| |
| if (module && !try_module_get(module)) { |
| put_device(&drive->gendev); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ide_device_get); |
| |
| /** |
| * ide_device_put - release a reference to a ide_drive_t |
| * @drive: device to release a reference on |
| * |
| * Release a reference to the ide_drive_t and decrements the use count of |
| * the underlying LLDD module. |
| */ |
| void ide_device_put(ide_drive_t *drive) |
| { |
| #ifdef CONFIG_MODULE_UNLOAD |
| struct device *host_dev = drive->hwif->host->dev[0]; |
| struct module *module = host_dev ? host_dev->driver->owner : NULL; |
| |
| module_put(module); |
| #endif |
| put_device(&drive->gendev); |
| } |
| EXPORT_SYMBOL_GPL(ide_device_put); |
| |
| static int ide_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| return 1; |
| } |
| |
| static int ide_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| |
| add_uevent_var(env, "MEDIA=%s", ide_media_string(drive)); |
| add_uevent_var(env, "DRIVENAME=%s", drive->name); |
| add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive)); |
| return 0; |
| } |
| |
| static int generic_ide_probe(struct device *dev) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| struct ide_driver *drv = to_ide_driver(dev->driver); |
| |
| return drv->probe ? drv->probe(drive) : -ENODEV; |
| } |
| |
| static int generic_ide_remove(struct device *dev) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| struct ide_driver *drv = to_ide_driver(dev->driver); |
| |
| if (drv->remove) |
| drv->remove(drive); |
| |
| return 0; |
| } |
| |
| static void generic_ide_shutdown(struct device *dev) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| struct ide_driver *drv = to_ide_driver(dev->driver); |
| |
| if (dev->driver && drv->shutdown) |
| drv->shutdown(drive); |
| } |
| |
| struct bus_type ide_bus_type = { |
| .name = "ide", |
| .match = ide_bus_match, |
| .uevent = ide_uevent, |
| .probe = generic_ide_probe, |
| .remove = generic_ide_remove, |
| .shutdown = generic_ide_shutdown, |
| .dev_groups = ide_dev_groups, |
| .suspend = generic_ide_suspend, |
| .resume = generic_ide_resume, |
| }; |
| |
| EXPORT_SYMBOL_GPL(ide_bus_type); |
| |
| int ide_vlb_clk; |
| EXPORT_SYMBOL_GPL(ide_vlb_clk); |
| |
| module_param_named(vlb_clock, ide_vlb_clk, int, 0); |
| MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)"); |
| |
| int ide_pci_clk; |
| EXPORT_SYMBOL_GPL(ide_pci_clk); |
| |
| module_param_named(pci_clock, ide_pci_clk, int, 0); |
| MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)"); |
| |
| static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp) |
| { |
| unsigned int a, b, i, j = 1; |
| unsigned int *dev_param_mask = (unsigned int *)kp->arg; |
| |
| /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */ |
| if (sscanf(s, "%u.%u:%u", &a, &b, &j) != 3 && |
| sscanf(s, "%u.%u", &a, &b) != 2) |
| return -EINVAL; |
| |
| i = a * MAX_DRIVES + b; |
| |
| if (i >= MAX_HWIFS * MAX_DRIVES || j > 1) |
| return -EINVAL; |
| |
| if (j) |
| *dev_param_mask |= (1 << i); |
| else |
| *dev_param_mask &= ~(1 << i); |
| |
| return 0; |
| } |
| |
| static const struct kernel_param_ops param_ops_ide_dev_mask = { |
| .set = ide_set_dev_param_mask |
| }; |
| |
| #define param_check_ide_dev_mask(name, p) param_check_uint(name, p) |
| |
| static unsigned int ide_nodma; |
| |
| module_param_named(nodma, ide_nodma, ide_dev_mask, 0); |
| MODULE_PARM_DESC(nodma, "disallow DMA for a device"); |
| |
| static unsigned int ide_noflush; |
| |
| module_param_named(noflush, ide_noflush, ide_dev_mask, 0); |
| MODULE_PARM_DESC(noflush, "disable flush requests for a device"); |
| |
| static unsigned int ide_nohpa; |
| |
| module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0); |
| MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device"); |
| |
| static unsigned int ide_noprobe; |
| |
| module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0); |
| MODULE_PARM_DESC(noprobe, "skip probing for a device"); |
| |
| static unsigned int ide_nowerr; |
| |
| module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0); |
| MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device"); |
| |
| static unsigned int ide_cdroms; |
| |
| module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0); |
| MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); |
| |
| struct chs_geom { |
| unsigned int cyl; |
| u8 head; |
| u8 sect; |
| }; |
| |
| static unsigned int ide_disks; |
| static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES]; |
| |
| static int ide_set_disk_chs(const char *str, struct kernel_param *kp) |
| { |
| unsigned int a, b, c = 0, h = 0, s = 0, i, j = 1; |
| |
| /* controller . device (0 or 1) : Cylinders , Heads , Sectors */ |
| /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */ |
| if (sscanf(str, "%u.%u:%u,%u,%u", &a, &b, &c, &h, &s) != 5 && |
| sscanf(str, "%u.%u:%u", &a, &b, &j) != 3) |
| return -EINVAL; |
| |
| i = a * MAX_DRIVES + b; |
| |
| if (i >= MAX_HWIFS * MAX_DRIVES || j > 1) |
| return -EINVAL; |
| |
| if (c > INT_MAX || h > 255 || s > 255) |
| return -EINVAL; |
| |
| if (j) |
| ide_disks |= (1 << i); |
| else |
| ide_disks &= ~(1 << i); |
| |
| ide_disks_chs[i].cyl = c; |
| ide_disks_chs[i].head = h; |
| ide_disks_chs[i].sect = s; |
| |
| return 0; |
| } |
| |
| module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0); |
| MODULE_PARM_DESC(chs, "force device as a disk (using CHS)"); |
| |
| static void ide_dev_apply_params(ide_drive_t *drive, u8 unit) |
| { |
| int i = drive->hwif->index * MAX_DRIVES + unit; |
| |
| if (ide_nodma & (1 << i)) { |
| printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name); |
| drive->dev_flags |= IDE_DFLAG_NODMA; |
| } |
| if (ide_noflush & (1 << i)) { |
| printk(KERN_INFO "ide: disabling flush requests for %s\n", |
| drive->name); |
| drive->dev_flags |= IDE_DFLAG_NOFLUSH; |
| } |
| if (ide_nohpa & (1 << i)) { |
| printk(KERN_INFO "ide: disabling Host Protected Area for %s\n", |
| drive->name); |
| drive->dev_flags |= IDE_DFLAG_NOHPA; |
| } |
| if (ide_noprobe & (1 << i)) { |
| printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); |
| drive->dev_flags |= IDE_DFLAG_NOPROBE; |
| } |
| if (ide_nowerr & (1 << i)) { |
| printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n", |
| drive->name); |
| drive->bad_wstat = BAD_R_STAT; |
| } |
| if (ide_cdroms & (1 << i)) { |
| printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); |
| drive->dev_flags |= IDE_DFLAG_PRESENT; |
| drive->media = ide_cdrom; |
| /* an ATAPI device ignores DRDY */ |
| drive->ready_stat = 0; |
| } |
| if (ide_disks & (1 << i)) { |
| drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl; |
| drive->head = drive->bios_head = ide_disks_chs[i].head; |
| drive->sect = drive->bios_sect = ide_disks_chs[i].sect; |
| |
| printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", |
| drive->name, |
| drive->cyl, drive->head, drive->sect); |
| |
| drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT; |
| drive->media = ide_disk; |
| drive->ready_stat = ATA_DRDY; |
| } |
| } |
| |
| static unsigned int ide_ignore_cable; |
| |
| static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) |
| { |
| int i, j = 1; |
| |
| /* controller (ignore) */ |
| /* controller : 1 (ignore) | 0 (use) */ |
| if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) |
| return -EINVAL; |
| |
| if (i >= MAX_HWIFS || j < 0 || j > 1) |
| return -EINVAL; |
| |
| if (j) |
| ide_ignore_cable |= (1 << i); |
| else |
| ide_ignore_cable &= ~(1 << i); |
| |
| return 0; |
| } |
| |
| module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0); |
| MODULE_PARM_DESC(ignore_cable, "ignore cable detection"); |
| |
| void ide_port_apply_params(ide_hwif_t *hwif) |
| { |
| ide_drive_t *drive; |
| int i; |
| |
| if (ide_ignore_cable & (1 << hwif->index)) { |
| printk(KERN_INFO "ide: ignoring cable detection for %s\n", |
| hwif->name); |
| hwif->cbl = ATA_CBL_PATA40_SHORT; |
| } |
| |
| ide_port_for_each_dev(i, drive, hwif) |
| ide_dev_apply_params(drive, i); |
| } |
| |
| /* |
| * This is gets invoked once during initialization, to set *everything* up |
| */ |
| static int __init ide_init(void) |
| { |
| int ret; |
| |
| printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n"); |
| |
| ret = bus_register(&ide_bus_type); |
| if (ret < 0) { |
| printk(KERN_WARNING "IDE: bus_register error: %d\n", ret); |
| return ret; |
| } |
| |
| ide_port_class = class_create(THIS_MODULE, "ide_port"); |
| if (IS_ERR(ide_port_class)) { |
| ret = PTR_ERR(ide_port_class); |
| goto out_port_class; |
| } |
| |
| ide_acpi_init(); |
| |
| proc_ide_create(); |
| |
| return 0; |
| |
| out_port_class: |
| bus_unregister(&ide_bus_type); |
| |
| return ret; |
| } |
| |
| static void __exit ide_exit(void) |
| { |
| proc_ide_destroy(); |
| |
| class_destroy(ide_port_class); |
| |
| bus_unregister(&ide_bus_type); |
| } |
| |
| module_init(ide_init); |
| module_exit(ide_exit); |
| |
| MODULE_LICENSE("GPL"); |